Tender For Special Repairs To Sunken Portion In Or Md Accommodation Jagjit Enclave At Niwaru Mil Stn
Tender Value
Ref. Documents
Estimated cost
Bid Submission
09 Oct 2026
16 days left
EMD
76680
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jaipur → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repairs To Sunken Portion In Or Md Accommodation Jagjit Enclave At Niwaru Mil Stn
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling floor, hearth or wall tilling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubish off the premises complete all as specified and directed. |
| 2 | M&L for coloured jointfree non skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile 0.11 sqm but not exceeding 0.18 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade over and including 15 mm thick screed bed in CM 1:6 complete all as specified and directed |
| 3 | Demolition of plain cement concrete (unreinforced) of any description and in any position not otherwise specifically provided including cutting of roads etc complete all as specified and as directed. |
| 4 | M&L for PCC 1:7:12 type F2 (using 40 mm graded stone aggregate) as in sunken floor complete all as specified and directed. |
| 5 | M&L for water proofing treatment of sunken floor slab comprises of the following specifications and all as specified (i) M&L for cleaning of the sunken floor of the RCC slab surface including sides by wire brush, chiesel out any mortar sticking to the surface and brooming / washing completely, laying 40 mm avg thickness PCC 1:2:4 type B-0 (using 12.5 mm graded aggregate) as in padding concrete to achieve proper slope including 50 mm dia 350 mm long medium grade GI pipe spouts with wire guage on inside mouth to be fixed. (ii) Rendering of uneven surfaces with 6 mm thick CM 1:4 mixed with integral WPC as per manufacturers instruction, fill it with water and check dampness and seepage. where dampness and seepage noticed nozzles shall be fixed and grouting carried out (iii) All junctions points of side walls where CI/GI pipes are passing through shall be sealed with epoxy putty (iv) After drying putty, wash the slab and sides of sunken portion with water and make it clean and clear (v) Applyying two coats of pitch free polyurethane elastomeric single compound liquid membrane with UV resistence, approx thickness of layer (1-2mm)(in two coat of min 600 micron each ) with coverage of 0.94 kg per sqm in each coat as per manufactures instructions to bottom and vertical sides up to finished flooor level +100 mm height. When the second layer is still sticky , coarse sand spry shall be carried out or vertical and bottom surface of the sunken portion all as specified and directed.(vi) Plaster the bottom and sides up to bottom of the skirting with minimum 20 mm thick CM 1:4 mixed with integral WPC 3 % of cement consumes as per manufacures specification including rounding of corners and junctions sloping towards spout Note:Test the water proofed area (ponding test) by filling water for atleast 72 hours and tested for leakage seepage and to the entire satisfaction of GE . Test shall be done in presence of EIC and record for each sunken slab shall be maintained. the treatment shall be got carried out by the manufacturer or their authorised applicators (vii) All pipes laid in sunken portion shall be covered with 50 mm thk PCC 1:3:6 all around after painting with anticorrossive black japan paint (viii) WPC shall be measured and paid seperately. (ix) Floor area only will be measured for payment purpose. |
| 6 | M & L for matt finish coloured jointless non skid ceramic tiles 7 to 8mm thick (Square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed by Engr in Charge |
| 7 | M&L for coloured glazed ceramic tiles 450mm X 350mm X 7 to 8mm thick on vertical surfaces of wall such as dado, skirting etc set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over and including 10mm thick backing coat in CM 1:4 complete all as specified and directed |
| 8 | Taking down chowkhats or frames not exceeding 1.5 Sqm each with shutter (without taking off shutter from the frame) and removing from site complete all as specified and directed. |
| 9 | S&F factory made solid PVC door frame of size 50mm x 47mm made out of 5mm single piece extruded PVC profiles reinforced with 19 x 19mm MS square tube provided with EPDM rubber gasket weather seal through out the frame and the profile mitre cut at two corners and joined by inserting 2 nos 150mm long brackets of 15 x 15mm MS square tube inside 19 x 19mm MS square tube suitably screwed complete all as specified. |
| 10 | S&F for 35 mm thick Factory made solid EPS core PVC Moulded Door shutter, 28 to 30 mm thick (stiles), with 2, 4 or 6 raised panel design, consisting of frame made out of MS tube 20 mm x 40 mm. The core panel shall consist of 25 mm thick high density EPS routed with design, sandwitched in between front side moulded prelam 2 mm thick Moulded PVC sheet on one face and 2 mm PVC sheet on other side. The shutter on all edges to be sealed with lipping of 10 mm (5mm x 2) thick x 25 mm wide PVC sheet on other side & 60 mm wide PVC sheet for lock lock rail side . the lipping shall be bonded to the 2 mm moulded / plain PVC sheet with solvant cement asas specified and shown in SSR and Particular specification & as directed by Engineer-in-charge.Note :- The PVC doors shall be fixed as per manufacturer's instructions and as directed by Engineer-in-charge. |
| 11 | S & F 100mm long handles, extruded aluminium alloy, fabricated type anodised complete all as specified and directed. |
| 12 | S & F 75 mm long butt hinges stainless steel (Grade SS-304) medium weight and fixed complete all as specified and as directed. |
| 13 | S&F 100 mm long aluminium anodised barrel tower bolt extruded section and fixed complete all as specified and directed. |
| 14 | Taking down of shutters of any description n. exc 1 sqm each complete all as specified and as directed. |
| 15 | Taking down of shutters of any description exc 2 sqm each complete all as specified and as directed. |
| 16 | S&F 40mm thick factory made flush shutter, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed. |
| 17 | M&L Pre laminated interior grade laminated board 19/20 mm type adhesive fixed with screws to timber frame work and edges all as specified & directed by Engineer-in-charge. |
| 18 | S & F 12 mm thick HDHMR (High density high moisture resistant) board one side white laminate and other side decorative as in Sink/ Wash Basin cabinets fixed with minifix hardware where ever required including edge band 22 mm wide 0.80 m thick of matching colour on exposed surfaces of board fixed with polymaster adhessive including trimming edges of edge band to true line of thicknesss of board by manual trimmer complete all as specified and directed. |
| 19 | S & F auto close hinges, stainless steel of grade SS-304, bright finish and fixed complete all as specified.Make : Godrej, Hindware, Lifetime, Hettich or equivalent |
| 20 | S&F magnetic ball catcher for cupboard of approved make complete all as specified and as directed |
| 21 | S&F 100 mm long Hasp and staple, mild steel, wire type, stove enamelled black, including bolt to hinge plate and fixed with screws complete all as specified and as directed |
| 22 | S&F 20mm dia Stainless Steel (SS-304 grade) rod including brackets for cup boards complete all as specified and as directed |
| 23 | S&F channel for sliding drawer, of approved make in cupboard all as specified and directed by Engineer -in- Charge |
| 24 | S & F 100 mm long butt hinges stainless steel (Grade SS-304) medium weight and fixed complete all as specified and as directed. |
| 25 | S&F 150 mm long aluminium anodised barrel tower bolt extruded section and fixed complete all as specified and directed. |
| 26 | S & F 150mm long handles, extruded aluminium alloy, fabricated type anodised complete all as specified and directed. |
| 27 | S&F in repair 300mm length aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed. |
| 28 | Taking down cement plaster or cement lime plaster, any description on brick, stone walls or concrete surface of ceiling etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed |
| 29 | M&L for rendering 10 mm thick in CM 1:6 on fair faces of brick masonry surfaces or concrete surface finished even and smooth without using extra cement complete all as specified and directed. |
| 30 | M&L for rendering 5 mm thick in CM 1:3 on concrete surface of ceiling finished even and smooth w/o using extra cement complete all as specified and directed. |
| 31 | M & L for preparation of new plastered wall surfaces and applying two coats of oil bound distemper of approved tint over and including priming plastered surfaces with alkali resistant priming paint over a cot of 1mm thick wall care putty incl necessary scaffolding complete all as specified and directed. |
| 32 | M&L for preparation of new plastered surfaces of ceiling and applying two coats of oil bound distemper over a coat of primer on ceiling and as directed by Engineer in charge |
| 33 | M&L for preparation of old steel and iron surfaces of any description, over 10 Cm in width or girth, not otherwise described and painting with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 34 | M&L for preparation of new wooden or wood based surfaces of any description, not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 35 | M&L preparing old painted wooden surface of any description over 10cm width or girth and applying two coats of synthetic enamel paint of approved tint all as specified and directed. |
| 36 | M&L for complete removal of existing treatment by mechanical means on old plastered surfaces of walls, including cleaning of any mortar drops, fungus efflorescent salts etc, preparation of surfaces & applying two coast of Oil bound distemper of approved make on wall over a coat of wall priming paint over a coat of wall care putty on plastered surface and filling the surface inperfections such as holes, dirt, fine cracks all complete including preparation of surfaces all as specified and as directed. |
| 37 | M&L for complete removal of existing treatment by mechanical means on old plastered surfaces of ceiling, including cleaning of any mortar drops, fungus efflorescent salts etc, preparation of surfaces & applying two coat of Oil bound distemper of approved make on ceiling over a coat of priming paint and as directed by Engineer in charge |
| 38 | Taking up or down 15mm steel tubing and connections including cleaning for refixing or removal complete all as specified and directed |
| 39 | Taking up or down 20 mm steel tubing and connections including cleaning for refixing or removal complete all as specified and directed. |
| 40 | Taking up or down 25 mm steel tubing and connections including cleaning for refixing or removal complete all as specified and directed. |
| 41 | S&F 15 mm dia steel water tubing, galvanized, medium grade, with all fittings, fixed to walls and ceiling or laid in floor complete all as specified and directed by Engineer-in-Charge |
| 42 | S&F 20 mm dia steel water tubing, galvanized, medium grade, with all fittings, fixed to walls and ceiling or in floor complete all as specified and directed by Engineer-in-Charge |
| 43 | S&F 25 mm dia steel water tubing, galvanized, medium grade, with all fittings, fixed to walls and ceiling or in floor complete all as specified and directed by Engineer-in-Charge Please Enable Macros to View BoQ information |
| 44 | S&F 25 mm dia steel water tubing, galvanized, medium grade, with all fittings, fixed to walls and ceiling or in floor complete all as specified and directed by Engineer-in-Charge Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 17, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 09, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 16 daysOct 12, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 19 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender