Tender For Special Repair Of Building No. P-1 (Psy Ward) And Adjacent Toilet Block Of Mh Jaipur
Tender Value
Ref. Documents
Estimated cost
Bid Submission
09 Oct 2026
6 days left
EMD
96280
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jaipur → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repair Of Building No. P-1 (Psy Ward) And Adjacent Toilet Block Of Mh Jaipur
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling floor, hearth or wall tilling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubish off the premises complete all as specified and directed. |
| 2 | M&L for coloured jointfree non skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile 0.06 sqm but not exceeding 0.11 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade over and including 15 mm thick screed bed in CM 1:6 complete all as specified and directed |
| 3 | M&L for coloured glazed ceramic tiles 450mm X 350mm X 7 to 8mm thick on vertical surfaces of wall such as dado, skirting etc set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over and including 10mm thick backing coat in CM 1:4 complete all as specified and directed |
| 4 | M&L for light shade full body vitrified ceramic tiles 8-10mm thick (square/rectangular) polished, area of each tiles n exc 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 15mm thick screed bed in CM 1:6 complete all as approved and directed. |
| 5 | M&L for light shade vitrified ceramic tiles 8-10mm thick (square/rectangular) polished, area of each tiles n exc 0.36 sqm, on vertical surfaces of wall such as dado, skirting etc set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over and including 10mm thick backing coat in CM 1:4 complete all as specified and directed |
| 6 | S&F in repair 15 mm dia steel water tubing, galvanized, medium grade, with all fittings, fixed to walls and ceiling or laid in floor including taking down old tubing complete all as specified and directed. |
| 7 | S&F in repair 20 mm dia steel water tubing, galvanized, medium grade, with all fittings, fixed to walls and ceiling or laid in floor including taking down old tubing complete all as specified and directed. |
| 8 | S&F in repair 25 mm dia steel water tubing, galvanized, medium grade, with all fittings, fixed to walls and ceiling or laid in floor including taking down old tubing complete all as specified and directed. |
| 9 | S & F in repair 1000 Ltrs capacity rotational moulded polyethylene water storage tanks, white, triple layered (cylindrical vertical with closed top) hoisted and fixed in position & including all fittings such as connection pieces with GI tank nipple for inlet, outlet, washout and overflow etc incl dismantling of old tank all as specified in SSR Part I complete all as specified and directed by Engineer-in-Charge. |
| 10 | S&F in repairs vitreous china wash hand basin with pedestal, white, flat back of size 630 x 450 mm excluding taps, waste pipe, chain & plug and porcelene stopper but including brackets /fastners, 32mm dia brass chromium plated waste coupling with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed and PVC waste pipe, cutting for and pinning in ends of brackets, including fixing of pillar tap complete all as specified and directed. |
| 11 | Supply only 15mm bore pillar tap, cast copper alloy, chromium plated, fancy type with capstan head, screwed down, high pressure with or without lettered 'Hot' or ' Cold' with long screwed shank and fly nuts, screwed for iron pipe complete all as specified and directed. |
| 12 | S & F in repair vitreous china urinal, bowl type (back or corner wall type), size of 465 x 355 x 265 mm (minimum) white incl providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws with grating and union for discharge pipe including PVC waste pipe complete complete all as specified and directed. |
| 13 | S&Fin repair most popular counter top viterous china wash hand basin, bowl type / rectangular/ square type with flat back, approved colour including SS bottle trap and all waste fitting accessories i.e. brass chromium plated waste coupling 32mm dia, PVC flexible waste pipe of adequate length etc incl fixing the WHB on granite slab and fixing of pillar tap complete all as specified and directed. |
| 14 | S&F in repairs vitreous China white single piece EWC (European type) of size 750mm x360mm x660mm incl inbuilt dual flush flushing cistern, S trap and soft close seat cover and mild steel chromium plated or aluminised hinging device and connection to drain (or out going pipe) and fixed complete all as specified and directed. |
| 15 | S&F in repair soap dish, stainless steel, approx size 160x160x90 mm fixed with chromium plated brass screws complete all as specified and as directed. |
| 16 | S&F in repair tubular towel rail, brass chromium plated, 20mm dia, D type, 60cm long between flanges complete all as specified and as directed. |
| 17 | M & L for 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking plat forms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed |
| 18 | S&F in repair 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed |
| 19 | S&F in repair PVC Connections 15mm size, 450mm long with PTMT nuts complete all as specified and as directed. |
| 20 | S&F in repair soap dispenser and holder with frosted glass bottle in polished chrome and fixed with chromium plated brass screw complete all as specified and directed. |
| 21 | S&F in repair SS Grating doom 125 mm dia with or without waste hole complete all as specified and as directed. |
| 22 | S&F in repair 15mm bore stop/angle valves, cast copper alloy, fancy type, chromium plated, screwed down high pressure with crutch or butterfly handle screwed for iron pipes or for unions and fixed complete all as specified and directed. |
| 23 | S&F in repair 18-20mm thick vitreous china urinal partition white of size 310x700 mm with fixing accessories and terminating in wall as directed complete all as specified and directed |
| 24 | M& L in repair for 75mm bore Cast iron Nahani trap with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and as directed. |
| 25 | Taking down eaves gutters, sanitary PVC pipes and rainwater pipes, cast iron pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed. |
| 26 | S&F 75mm bore Cast iron soil, waste and vent pipes (spun pipe) in any length with or without ears, with lead joints, laid in trenches or in floors complete all as specified and directed.Note: Payment of each lead joint paid seperately under respective item of BOQ |
| 27 | Taking down existing roof treatment complete including demolition of PCC, Mud phuskas, lime concrete etc any description upto mother slab, and properly cleaning the surface to remove loose particles with wire brushes and removing the debris out side of MoD land complete all as specified and as directed. |
| 28 | M&L screed plaster 10mm thick in cement mortar 1:3 on concrete surfaces of roof to receive water proofing treatment and finished the surface even and smooth without using extra cement etc incl mixing of WPC as per manufacturers instruction complete all as specified and directed.Note:- Integral water proofing compound paid seperately as supply only |
| 29 | M&L for surface preparation by removal of all loose particle to ensure clean, smooth and dry surface and laying 40mm thick (Average) PCC 1:2:4 type B-0 (using 12.5 mm graded stone aggregate) finished even & smooth without using extra cement to cover negative slope into prop complete all as specified and directed |
| 30 | Water proofing tratment to existing roof/terrace using Single component, acrylic based, flexible, micro fibre reinforced waterproofing and heat reflective coating system. the treatment shall be carried out as per the manufacturers instructions and shall include.(a) Preparation of substrate and cleaning it off all loose and triable by mechanical means(b) Open the cracks lines to form , V grooves with cutter/hammer/chisel up to 5-10mm and filling with crack filler and PU sealant.(c) application of primer coat @ 0.2 to 0.3 kg/ sqm followed by the first coat @ 0.75kg/ Sqm.(d) The second coat shall be applied @ 0.75 kg / Sqm and reinforced with fabric re-inforcement between the first and second coat.(e) The top coat of primer shall be applied after the second coat dries off @ 0.05-0.08 Kg per Sqm.(f) The material shall adhere to following specification. TECHNICAL SPECIFICATION OF MATERIALTensile Strength 1.5 MPa ASTM D412Elongation at Break > 200% ASTM D412Adhesion in Peel > 1.5 MPa (on concrete substrate) EN 1542Crack Bridging Ability Passes upto 3.2mm Width ASTM C1305Permeability to Water Vapour Passes IS 2645Water Vapour Transimission ~ 23 g/m²/24hr ASTM E96Water Absorption < 10% ( by Mass) ASTM D570Microbiological Resistance No Algae & Fungal Growth ASTM D5590Solar Reflectance Index 102 ASTM E1980.Make : Berger- Roof Kool & Seal, Asian-Damp Proof Ultra, Pidilite-Roof Seal Ultra, STP- ShaliUrethane BTD plusNote : 1. Complete material shall be procured in bulk and kept in lock and key.2. The installation company should be trained and authorized by Manufacturer & installation to be carried out as per manufacturers approved method statement. All auxiliary & accessories involved during application should be supplied by single manufacturer as a part of system. Any component used which is not manufactured by the particular manufacturer can only be used with official approval from manufacturer |
| 31 | Supply only integral water proofing compund ISI marked complete all as specified and directed. |
| 32 | M&L Jodhpur stone roof slabs, self faced 10 cm to 12.5 cm thick, 25 cm to 35 cm wide hoisted and set, joined and grounted in CM 1:3 complete all as specified and as directed by Engineer-in-Charge. |
| 33 | Dismantling of stone slab and tiles of any description or thickness in floor aprons etc laid beded and pointed in any mortar complete all as specified and directed . |
| 34 | Demolition of brick work or stone/ boulder masonary, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles complete all as specified and directed. |
| 35 | M&L for brick work with sub-class 'B' bricks (old size), straight or curved on plan exc 6m mean radius built in In cement mortar 1:6 complete all as specified and directed |
| 36 | M&L for rendering 10mm thick in CM 1:6 on fair faces of brick masonry surfaces or concrete surface finished even and smooth without using extra cement complete all as specified and directed. |
| 37 | Taking down cement plaster or cement lime plaster, any description on brick, stone walls or concrete surface of ceiling etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed |
| 38 | M&L rendering 15mm thick in CM 1:6 on stone masonry surfaces or on surface other than fair faces of brick masonary finished even and smooth without using extra cement complete all as specified and directed. |
| 39 | M&L rendering 15mm thick in CM 1:4 on stone masonry surfaces or on surface other than fair faces of brick masonary finished even and smooth without using extra cement complete all as specified and directed. |
| 40 | M&L for rendering 5 mm thick in CM 1:3 on concrete surface of ceiling finished even and smooth without using extra cement complete all as specified and directed. |
| 41 | M&L for preparation of newly plastered surface of walls and applying two coats of premium acrylic smooth exterior emulsion paint, 1st quality (company depot tinted) of approved manufacturers in required colour and shade using hand roller over and including one coat of alkali resistant priming paints complete all as specified and directed. |
| 42 | M&L for preparation of newly plastered surface of walls and applying two coats of premium acrylic smooth interior emulsion paint, 1st quality (company depot tinted) of approved manufacturers in required colour and shade using hand roller over and including one coat of alkali resistant priming paints complete all as specified and directed. |
| 43 | M&L for preparation of newly plastered surface of ceiling and applying two coats of premium acrylic smooth interior emulsion paint, 1st quality (company depot tinted) of approved manufacturers in required colour and shade using hand roller over and including one coat of alkali resistant priming paints complete all as specified and directed. |
| 44 | Providing and applying 1mm thick (avg thickness) wall care putty over plastered surface of wall to prepare the surface even and smooth complete all as specified and directed. |
| 45 | M&L for preparation of old plastered surface of walls and applying one coat of premium acrylic smooth exterior emulsion paint, 1st quality (company depot tinted) of approved manufacturers in required colour and shade using hand roller complete all as specified and directed. |
| 46 | M&L for complete removal of existing treatment by mechanical means on old plastered surfaces of walls, including cleaning of any mortar drops, fungus efflorescent salts etc, preparation of surfaces & applying two coats of premium acrylic smooth interior emulsion paint, 1st quality (company depot tinted) of approved manufacturers in required colour and shade using hand roller complete all as specified and directed. |
| 47 | M & L for preparation of old decorated surfaces of ceiling including brooming down and cleaning the surface and applying two coats of white wash complete all as specified and directed |
| 48 | Taking down chowkhats or frames not exceeding 1.5 Sqm each with shutter (without taking off shutter from the frame) and removing from site complete all as specified and directed. |
| 49 | Taking down chowkats or frames exceeding 1.5 Sqm but not exceeding 4 Sqm each with shutter (without taking off shutter from the frame) and removing from site complete all as specified and directed. Please Enable Macros to View BoQ information |
| 50 | Taking down chowkats or frames exceeding 1.5 Sqm but not exceeding 4 Sqm each with shutter (without taking off shutter from the frame) and removing from site complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 17, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 09, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysOct 12, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender