Tender For Special Repair To Building No Etk-4, Etk-6, Etk-9 Of Inf Bn At Mil Stn Dhana Under Age (I) Dhana
Tender Value
69.90 Lakhs
Estimated cost
Bid Submission
13 Oct 2026
10 days left
EMD
1.29 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Sagar → Madhya Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repair To Building No Etk-4, Etk-6, Etk-9 Of Inf Bn At Mil Stn Dhana Under Age (I) Dhana
BOQ
| Sl. No. | Item Description |
| 1 | Taking down chowkhats or frame nexc 1.5 sqm each with shutters (without taking off shutters from the frame) complete all as specified and directed. |
| 2 | Taking down chowkhats or frame exc 1.5 sqm but n exc 4.00 sqm each with shutters (without taking off shutters from the frame) complete all as specified and directed. |
| 3 | Supply & fixing 105 x 60 mm size Pressed steel frames 1.25mm thick for doors with one rebate including necessary fixing lugs, hinges, lock strike plate, and making good with plastering in CM 1:4 including distempering as required at site etc, complete as specified and directed. |
| 4 | Supply & fixing 35mm thick factory made second class hard wood Glazed and skeleton door shutters, open rebated and prepared to receive gauze with sash bars, edges of framing plain fitted with cut and mitred beads (all around of Ist class soft wood) for securing wire mesh or glass, size of members of shutter as specified in SSR Pt-I Sec-8 clause 8.24(b) fitted to chowkats, complete as specified and directed. |
| 5 | S & F 30 mm thick Flush shutters, solid core construction, and plywood face panels, commercial type on both sides complete all as specified and directed. |
| 6 | Supply and fixing anodised aluminium window and ventilator shutters,powder coated side hung / sliding type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and directed. |
| 7 | Supply and fixing Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of andles and fixing approved anodised aluminium standard section around the opening, all complete as per equirement and direction of Engineerin- charge. complete all as specified and directed. |
| 8 | M&L for Frame work such as grills , gratings, railings, frame work of water tanks and the like conforming to Fe-290, Gde E-165 complete all as specified and directed. |
| 9 | S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperure 1.40 mm and fixed with stainless steel wire staples fixed complete all as specified and directed.. |
| 10 | S&F 150 mm Stainless steel handles ISI marked, cast type, complete all as specified and directed |
| 11 | S&F 150 mm Stainless steel tower bolts ISI marked, extruded section and fixed complete all as specified and directed. |
| 12 | S&F ISI marked,300 mm long stainless steel sliding door bolts with hasp stapple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast sections or cast aluminium alloy complete all as specified and as directed. |
| 13 | Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specified and directed. |
| 14 | M&L for granite (any type) 20 mm thick work (table rubbed and polished) in steps, jambs, pillars, window & door cills, cooking platforms, counter, shelves and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 15mm thick screed bed in CM 1:4 complete all as specified and directed. |
| 15 | M&L for size 1200mm x 600 mm (4' x 2' ) Machine cut kota stone slab flooring 20-25mm thick over cement screed base in CM 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete all as specified and directed. |
| 16 | M&L for machine cut Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete all as specified and directed. |
| 17 | Demolition of cement concrete in ground floor, (unreinforced) paving n exc 15 cm thick(below or above GL) incl tiling if any complete all as specified and directed. |
| 18 | M&L for 75 mm thick PCC 1:3:6 type C2 , using 40 mm graded stone aggregate in plinth protection,aprons, hard standing, path and like including finishing the surfaces even and smooth without using extra cement complete all as specified and directed. |
| 19 | M&L for harcore of broken stone or boulders of gauge n exc 63 mm deposited spread and levelled in layers n exc 15 cm thick watered and rammed to a true surface complete all as specified and directed. |
| 20 | M&L for cement concrete 1:4:8 type D-2 (using 40 mm graded stone agg) as in foundation , filling, subbase and mass concrete complete all as specified and directed. |
| 21 | Dismantling floor, hearth or wall tiling including cement mortar bedding(but not backing), removing serviceable tiles and rubbish off the permises complete all as specified and directed. |
| 22 | M&L Non-skid ceramic colour tiles 7 to 8 mm thick , (square/rectangular), area of each tiles exceeding 0.09 Sqm but not exceeding 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of the tiles over and including 15 mm thick screed bed in cement sand mortar 1:4 complete all as specified and as directed. |
| 23 | M&L for coloured glazed tiles in walls /vertical surface 350 x 250 x 7 mm/ 450X300X7mm thick set and jointed over and including 10 mm thick rendering even and rough in CM 1:4 for backing of tiles, jointed in neat cement slurry and pointed in white or colour cement to match the shade of tiles complete all as specified and directed. |
| 24 | Demolition of brick work, built in Cement mortar including all quoins, arches, pillars etc complete all as specified and directed. |
| 25 | M&L for brick work with sub class ‘B’ (modular size bricks) straight or curved on plan exc 6 m mean radius, built in CM 1:6 all as specified and directed. |
| 26 | M&L for brick work with sub class ‘B’ (modular size bricks) straight or curved on plan any radius in half brick thick walls, built in CM 1:4 complete all as specified and directed. |
| 27 | Taking down cement plaster on brick or concrete surfaces, including racking out joint, hacking for key, scrubbing down with water complete all as specified and directed. |
| 28 | S&F for Wire netting of galvanised steel wire 1.40 mm dia fixed with tinned tacks of wire staples size of mesh 12 mm for fixing at junction of wall, beam and columns prior to plastering complete all as specified and directed. |
| 29 | M&L15mm thick rendering in CM 1:6 on brick/concrete surfaces including finishing the surfaces even and smooth (without using extra cement) complete AND M&L for preparation of new plastered surfaces of walls and applying two coats of distemper oil emulsion complete all as specified and directed. all as specified and directed. |
| 30 | M&L 15mm thick rendering in CM 1:4 on brick/concrete/stone masonry surfaces including finishing the surfaces even and smooth (without using extra cement) incl mixing with water proofing compound complete all as specified applying two coats of cement base piaint complete all as specifed and directed. |
| 31 | Supply only liquid water proofing compound complete all as specified and directed. |
| 32 | M & L for complete removal of existing treatment and appllying two coats of weather proof exterior paint over a coat of primer and waterproof exterior wall putty on wall for smooth finish including preparation of surfaces complete all as specified and directed.Note : Each stages will be got appoved from Engineer-in-Charge before application |
| 33 | Preparation of old decorated surfaces of walls including , corners, pillars etc by washing, scraping, rubbing & brooming down and applying one coat of white wash including filling of minor holes/cracks with putty & removing nails etc with two coat of oil bound distemper complete all as specified and directed. |
| 34 | M&L for applying of 1.5 mm thick white wall care cement based water proof putty on walls complete all as specified and directed. |
| 35 | M & L for preparation of new surfaces of wall including brooming down or steel wire brushing, and applying three coats of white wash complete all as specified and directed. |
| 36 | S & F in repairs stainless steel 20 mm dia drapery curtain rod with fancy type bracket for hanging and fixing complete all as specified and directed. |
| 37 | S&F in repairs WHB oval type of selected quality fixed with granite counter of approved make decorative type including cuppling and waste pipe,complete fixed in repairs complete all as specified and directed. |
| 38 | S&F 15 mm Pillar taps, fancy type cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed. |
| 39 | S&F in repairs Soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed. |
| 40 | S&F in repairs vitreous china wash down water closed pan (Pedestal pattern), white(excluding fixing bolts, flushing cistern and flush pipe) and including plastic seat cover with aluminium hinging device complete all as specified and directed. |
| 41 | S&F in repairs vitreous china WC squatting pan \\"Orissa Pattern\\" size 580mm x 440mm white with integral foot rests, including provn of cement concrete bedding and 'P' or 'S' trap as required incl connection to trap , and to flush pipe, anti syphonage pipe, etc. complete including making good to floor complete all as specified and directed. |
| 42 | S&F in repairs syphonic action type PVC low level flushing cistern 10 ltrs capacity incl 32mm dia flush pipe and fixing to supply pipe including PVC connection 600 mm long 15 mm bore with brass heads & washers with connections fixed in repairs complete all as specified and directed. |
| 43 | S&F in repair Vitreous China Urinal, Half stall type,white (excluding flushing cistern, flush pipe and waste pipe) including CP urinal spreader complete all as specified and directed. |
| 44 | S&F brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges, complete all as specified and directed. |
| 45 | S&F in repairs 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 46 | S&F in repairs 100mm dia CP grating complete all as specified and directed. |
| 47 | S&F in repairs PVC connection 15mm size with PTMT nuts of length 600 mm fixing complete all as specified and directed by engr in charge. |
| 48 | M&L PVC (SWR) floor trap plain with grating incl jointing with solvent cement 75mm bore complete all as specified and direcetd. |
| 49 | S&F PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed. |
| 50 | S&F in repairs for chromium plated shower rose 125 mm with or without swivel joints, with shower arms any size, including fixing to steel pipe or union complete all as specified and directed. |
| 51 | S&F in repairs 15 mm Stop valves (Concealed type), chromium plated fancy type long shank and cup , cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. |
| 52 | S&F 15 mm bore Bib taps, cast copper alloy, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferulle and fixed complete all as specified and directed. |
| 53 | S&F in repairs 15 mm bore stop cock, cast copper alloy, chromium plated with long shank and cut (Angle Valves ), screwed down, screwed for iron pipe or union complete as specified and directed. |
| 54 | Taking up or down 20 mm bore GI steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed. |
| 55 | S&F 20 mm GI tube medium grade with all necessary fittings and fixed complete to wall and ceiling or laid in floors complete all as specified and directed. |
| 56 | Taking up or down 15 mm bore GI steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed. |
| 57 | S&F 15 mm GI tube medium grade with all necessary fittings and fixed complete to wall and ceiling or laid in floors complete all as specified and directed. |
| 58 | Excavating in trenches n exc 1.5m deep and n exc 1.5 m wide for foundation etc and getting out in any type of soils complete all as specified and directed. |
| 59 | Demolition and breaking up of 150 mm dia of drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortar complete all as specified and directed. |
| 60 | M&L for cement concrete 1:4:8 type D2, concrete bed to drain pipes 150 mm dia including packing under, and haunching against the sides of pipes after they are laid and tested; complete all as specified and directed. |
| 61 | Cutting into existing manholes/septic tanks for connecting new drains, making good to pipes and rendering, cutting out existing benching for forming branch channel (1/2 round or 3/4 section ) in cement concrete 1:2:4 type B1 smooth finished, and reforming benching as required for dia 150 mm complete all as specified and directed. |
| 62 | Returning filling in any type of soil including spreading levelling watering and well ramming in layers n. exc 25 cm complete all as specified and directed. |
| 63 | Removing excavated material exc. 500 m but n exc. 1.5 km and depositing where directed at a level n exc 1.5 mtr above starting point complete all as specified and directed. |
| 64 | S&F in repair 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches/floors complete all as specified and directed. |
| 65 | S&F in repair 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls fixed with MS clamp complete all as specified and directed. |
| 66 | S&F in repair 110 mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed. |
| 67 | S&F in repair PVC (SWR) bends any radius 110 mm dia complete all as specified and directed. |
| 68 | S&F PVC (SWR) vent cowl 110 mm complete all as specified and directed. |
| 69 | M & L for preparation of old painted steel surface of any description exceeding 10cm width or girth and applying one coat of synthectic enamel paint of approved tint complete all as specified and directed. |
| 70 | M&L preparation of new or previously untreated wooden surface of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and as directed. |
| 71 | Dismantling of asbestos cement (corrugated, semi corrugated etc.) sheets in roof coverings, including ridge complete all as specified and directed. |
| 72 | S&F pre- painted galvalume aluminum zinc coating GI Based corrugated steel sheeting 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, chajjas, fixed with self tapping screws complete all as specified & directed |
| 73 | S&F Pre-painted galvalume aluminum zinc coating GI based profile steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed. |
| 74 | S&F steel work as in tubular (round/square/rectangular shape of pipes as approved by Engr-In-Charge) including post special shaped washers etc complete incl necessary nut bolts etc using ERW or induction butt welded tubes conformining to IS 1161-1998 grade St-240 complete all as specified and as directed. |
| 75 | Dismantling of wall and celing hard boards/AC sheets and plywood in any thickness & any position including cover fillets complete all as specified and directed |
| 76 | S & F Anodised aluminium snap grid of size 605 x 605mm frame work for false ceiling all as specified complete all as specified and as directed. |
| 77 | M&L Exposed metal frame ceiling with calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600 mm x 600mm grid (Frame work for ceiling shall be measured and paidseparately) complete all as specified and directed |
| 78 | Dismantling water tank capacity exc 1000 ltrs but nexc 2000 ltrs and removing to stores complete all as specified and directed |
| 79 | S&F 1000 Ltr rotational moulded polyethylene water stotage tanks incl ball valve brass,high pressure, with polythene float and flynut complete, (cylinderical verticle with closed top) hoisted & fixed in position complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 17, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 13, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysOct 15, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 12 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender