Tender For Repair And Renovation Of Sadbhavna Park Near Kinderkin School Model Town In Ward No. 20 At Mc Panipat (Urban).
Tender Value
33.86 Lakhs
Estimated cost
Bid Submission
28 Sep 2026
4 days left
EMD
68000
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Panipat → Haryana
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair And Renovation Of Sadbhavna Park Near Kinderkin School Model Town In Ward No. 20 At Mc Panipat (Urban).
BOQ
| Sl. No. | Item Description |
| 1 | PROVIDING AND FIXING BRIDGE LADDER :- Bridge ladder legs pipe is made up 50 mm i/d GI pip `B-Class 5.0 mtr long and 2.0 mtr. high with 2.5 mtr height in the centre jointed with 20 mm i/d GI pipe B-Class 50 cm long pipe spaced at 250mm. All nut bolts covered from specially designed nylon caps to avoid rusting and injury to kids.All welded joints are well grinded,filled with epoxy sealant and All parts to be treated chemically and treated with the pure polyester powder coating (ovenbaked) with minimum thickness of 40 microns done on the pipes extend the life of equipments.All the makes of GI pipe,angles and nuts and bolts should be ISI make.To be installed in C.C.base of size 30X30X45 cm of concrete mix 1:15:3 as per order by engineer in charge.The Equipment and Installation should confirm to National and International safety norms. The rates includes the cost of fixing of equipment in complete satisfaction of engineer-in-charge. |
| 2 | Recovery of old and usable bricks |
| 3 | Credit of old steel |
| 4 | Air Walker: Providing, designing and fixing of Air-Walker of size 100*550*1480mm fabricated with main post og 140mm dia and 3.00mm thick made up of hot rolled tubular steel and hot dipped galvanized, and powder coated 80-120 micron thick using Akzo Nobel or equivalent in desired shade and colour. All welding joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to br applied at all welding points prior to finishing. Base plate cover shall be made up of virgin LLDPE plastic by rotational moulding with minimum 4.00 mm thickness UV resistant and colour as approved by Engineer-in Charge. High quality grip rubber should be used on handles. Foothold shall be made of Nylon alloy with rounded edge to prevent impact and injury. Maintenance free bearing should be used in equipment manufactured by reputed company duly sealed and self lubricated to be approved by Engineer in Charge. Equipment to be fitted with inbuilt limiters. The equipment should be fixed on ground with concrete of minimum streength M25 and J shaped welded bolts. Including Contractor Profit, overhead charges, GST and all others charges. |
| 5 | Leg Press: Providing, designing and fixing of stair stepper in a combination of pair and a single step of size 2000 X 550 X 1600 mm fabricated with main post of 140mm dia and 3.00 mm thick and other pipes of 40mm dia 3.00mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Handle bars are to be provided with high quality grip rubber at top end. Padals shall be made up of Nylon alloy with rounded edge of prevent any impact of injury and seat to be made from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic 4.00mm, colourful and U V resistant environmental friendly. Bearing used shall be maintenance free, duly oiled sealed and self lubricated made by reputed company to be approved by Engineer-in-Charge. Equipment to be fitted within built limiters to prevent unwanted movements. All open ends of pipe to be coloured by GI/LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M25 and J shaped welded bolts and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate cover, all complete as per direction and approval of Engineer-in-Charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipment etc. .Including Contractor Profit, overhead charges, GST and all others charges |
| 6 | Pull Chair: Providing, designing and fixing of Pull pair of size 2500 X 800 X 2000 mm fabricated with main post of 140mm dia and 3.00 mm thick and other pipes of 40mm dia 3.00mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Handle bars are to be provided with high quality grip rubber at top end. Padals shall be made up of Nylon alloy with rounded edge of prevent any impact of injury and seat to be made from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic 4.00mm, colourful and U V resistant environmental friendly. Bearing used shall be maintenance free, duly oiled sealed and self lubricated made by reputed company to be approved by Engineer-in-Charge. Equipment to be fitted within built limiters to prevent unwanted movements. All open ends of pipe to be coloured by GI/LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M25 and J shaped welded bolts and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate cover, all complete as per direction and approval of Engineer-in-Charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipment etc. Including Contractor Profit, overhead charges, GST and all others charges. |
| 7 | Seated Chest Press :- Providing, designing and fixing Seated Chest Press of Pull pair of size 1800 X 700 X 2000 mm fabricated with main post of 140mm dia and 3.00 mm thick and other pipes of 40mm dia 3.00mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all . Including Contractor Profit, overhead charges, GST and all others charges. |
| 8 | Arm Wheel :- Providing, designing and fixing Arm Wheel in a pair of size 850 X 800 X 1800 mm fabricated with main post of 140mm dia and 3.00 mm thick and other pipes of 40mm dia 3.00mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Handle bars are to be provided with high quality grip rubber. Padals shall be made up of Nylon alloy with rounded edge of prevent any impact of injury and seat to be made from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic 4.00mm, colourful and U V resistant environmental friendly. Bearing used shall be maintenance free, duly oiled sealed and self lubricated made by reputed company to be. Including Contractor Profit, overhead charges, GST and all others charges. |
| 9 | Twister:- Providing designing and fixing Twister of size 1700*1300*1300mm fabricated with main post of 140mm dia and 3.00 mm thick and other pipes of 40mm dia 3.00 mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized, powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All welded joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Handle bars are to be provided with high quality grip rubber. Foothold shall be made up of Nylon alloy with rounded edge of prevent any impact of injury and seat to be made from virgin LLDPE manufactured bt rotational moulding with minimum thickness of plastic 4.00mm, colourful and UV resistant environmental friendly. Bearing used shall be maintenance free, duly oiled sealed and self lubricated made by reputed company to be approved bt Engineer-in-Charge. Equipment to be fitted within built limiters to prevent unwanted movements. All open ends of pipe to be coloured by GI/LLDPE caps for user safety. Including Contractor Profit, overhead charges, GST and all others charges. |
| 10 | Mural painting/Graffiti on walls of parks/road sides, electric poles in different colours and shades with weather shield paint by the skilled painters/ fine art artists and with wall Putti/White Wash as a base before the start of work and in complete satisfaction of the engineer-in-charge. |
| 11 | Providing and Laying of EPDM Synthetic court 15mm ( 9mm SBR plus 6 mm EPDM) including loading, unloading, carriage of material, markings,contractor profit, overhead charges and all taxes complete in all respect. |
| 12 | Supply, erection and installation of ISI mark uPVC corrugated sheet for roofing of gazebo with provision and fixing of sheet with J-bolts complete in the satisfaction of engineer-in-charge. |
| 13 | Providing and fixing of stainless steel 304 grade three dimensional signage with polish all complete as specified and as directed by the Engineer-in-Charge. (NOTE- The rates taken are approved by DISTRICT LEVEL PURCHASE COMMITTEE, KARNAL vide letter no. PR/KNL/2010/1380-1385, Dated- 24-02-2020) with per inch unit............ |
| 14 | Arch Swing 2 Seater Product Area: 3.0mt x 1.50m Safe Play Area: 4.5m x 3.0m Height of Swing: 2.10m from GL Width of Swing: 2.80 to 3.0m Of Beam (2 Seater) Main Frame 62mm OD And Beam x 2.2mm Thick GI Pipe Seat - Seat Attached from Beam with Help of Rubber Coated G.I. Chain with Nylon Seated Straps |
| 15 | MINI HOUSE/ MULTIACTION PLAY SYSTEM PROVIDING and INSTALLING THE MINI PLAY HOUSE OF MAKE OF KHALSA SIZE 6.0 X 1.80MTR WITH SLIDE FRAME MADE OF ROUND 80 NB PIPE HAVING MIN “B” CLASS GL. PIPE. ALL THE PIPES SHOULD BE ISI MARKED (AS PER THE 1239/2004) and OF REQUITED BRAND. ENSURING THE STRENGTH, DURABILITY, STABILITY and LONG LIFE TO THE KID’S STRUCTURE WITH SAFETY AS PARAMOUNT. DECK: HAVING 1035 MM X 750 MM WITH COLLAR OF 65MM SIZE MADE OF PERFORATED SHEET. HYDRAULIC PRECISION PUNCHED HOLES MADE OF MIN 10 MM NB WITH SHEET THICKNESS OF APPROX. 2.5 MM COMPONENTS FRP (FIBER REINFORCE PLASTIC) MAINSUNSHINE LINE DESIGNER ROOF HAVING MIN 2-4 LAYERS (APPROX. 4MM THICKNESS) WITH BRIGHT COLOURS BEGIN UV RESISTANT LADDER MAIN FRAME MADE OF ROUND PIPE 25MM NB PIPE and LADDER RUNGS MADE OF 15 MM N.B. PIPE HAVING WIDTH OF 400 MM X 70 MM (APPROX.) ALL THE PIPES SHOULD BE ISI MARKED (AS PER THE IS1239/2004) and OF REPUTED BRAND. TREE CLIMBER MADE OF MAIN FRAME PIPE 25MM NB ROUND PIPE and RUNGS MADE OF 20MM NB ROUND PIPE. ALL THE PIPE SHOULD BEEN ISI MARKED (AS PER IS 1239/2004) andOF REQUITED BRAND. BARCODE ON MACHINE TO SHOW THE PROPER USE OF MACHINE.WORKOUT CARD and DIET CARD SHOULD BE SHOW IN APP. CUSTOMER CAN BOOK HIS ASSESMENT FROM HIS LOCATION. ALL MUST BE COMPATIBLE IN IOS AND ANDROID FOR BOOK THE SLOT AND TICKETS EQUIPMENT MUST BE MADE AND CONFIRMS WITH THE APPROVED STANDARDS CERTIFIED BY AND CERTIFICATES ARE MANDATORY REQUIRES IN THE NAME OF BOTH TENDERS ACT AS BIDDER AND MANUFACTURER. |
| 16 | HEXAGONAL CLIMBER: - PRODUCT AREA: MINIMUM (2400 MM X 2100 MM). SAFE PLAY AREA: MINIMUM (4200 MM X 3900 MM). HEXAGONAL CLIMBER CONSISTS OF STRAIGHT NET. CLIFF CLIMBER. ROCK CLIMBER WALL. FIREMAN POLE. AEROBIC POLE. VERTICAL STEP LADDER. HEX CLIMBER FRAME IS MADE UP OF MINIMUM 80 NB GI B-CLASS PIPE. STRAIGHT NET IS MADE UP OF MIN 18 MM 10 DPP ROPE ROPES ARE CONNECTED WITH NYLON BALL CLAMPS. ROCK CLIMBER IS MADE UP OF FRP HAVING INBUILT M.S ANGLE FRAME. ROCK HOLDS ARE MADE UP OF NYLON CLIFF CLIMBER POD IS MADE UP OF LLDPE PLASTIC. CLIFF CLIMBER SUPPORT IS MADE UP OF MINIMUM 25 NB GI B-CLASS PIPE. FIREMAN POLE IS MADE UP OF MINIMUM 25 NB GI B-CLASS PIPE. VERTICAL LADDER STEP IS MADE UP OF MINIMUM 20 NB GI B-CLASS PIPE AEROBIC POLE HORIZONTAL MEMBER IS MADE UP OF MINIMUM 20 NB GI B-CLASS PIPE. BARCODE ON MACHINE TO SHOW THE PROPER USE OF MACHINE.WORKOUT CARD and DIET CARD SHOULD BE SHOW IN APP. CUSTOMER CAN BOOK HIS ASSESMENT FROM HIS LOCATION. ALL MUST BE COMPATIBLE IN IOS AND ANDROID FOR BOOK THE SLOT AND TICKETS. EQUIPMENT MUST BE MADE AND CONFIRMS WITH THE APPROVED STANDARDS CERTIFIED BY AND CERTIFICATES ARE MANDATORY REQUIRES IN THE NAME OF BOTH TENDERS ACT AS BIDDER AND MANUFACTURER. 1. IS 17801 2. ISO 18001 3. ISO 27001:2013 4. ISO 50001:2018 5. ISO 13485:2016 6. ISO 45001:2018 7. ISO 14001:2015 8. ISO 9001:2015 9. ISO 14001:2004 10. ISO 9001:2008 11. EN 14904 12. EN-1176-1-2017 13. EN 16630:2015 14. EN 16630 15. EN 957 16. EN 9100:2016 17. EN 11630:2017 18. GS 19. DIN 18032.2 20. DIN 79000-2012 21. CE CERTIFICATE 22. CE 11993 23. OHSAS 18001:2017 24. SLBR 62 25. BIFMA 26. GMP 27. ROHS THE EQUIPMENT MUST ACCOMPAINED WITH TEST REPORT FOR QUALITY, SAFETY, DURABILITY AND PROPER FUNCTIONING OF EQUIPMENT MUST MANDATORY REQUIRES TEST REPORT IN THE NAME OF BOTH TENDERER ACT AS BIDDER AND MANUFACTURER. 1. TEST REPORT OF SS NUT and BOLTS 2. TEST REPORT OF LLDPE BASE CAPS FOR OPEN GYM 3. TEST REPORT OF POWDER COATING PIPE4. TEST REPORT OF SKF BEARING NO. 6007-2Z 5. TEST REPORT OF FRP/PLASTIC (FIBER PAD) 6. TEST REPORT OF WELDING PIPE (ROBOTIC MIG WELDING) 7. TEST REPORT OF MEK SOLVENT 8. TEST REPORT OF NEUTRUL SALT SPRAY TEST 9. TEST REPORT OF BREAKING LOAD OF WELDING PIPE 10. TEST REPORT OF GI PIPE 100 MM NB11. TEST REPORT OF GI PIPE 80 MM NB12. TEST REPORT OF GI PIPE 50 MM NB13. TEST REPORT OF GI PIPE 32 MM NB14. TEST REPORT OF GI PIPE 25 MM NB |
| 17 | FISH BIN:- AREA: MINIMUM DIAMETER 400. CAPACITY: MINIMUM 60 LTR. PRODUCT AREA: MINIMUM 400 DIAMETER. FISH BIN IS MADE UP OF FIBER REINFORCMENT PLASTIC. IT HAS MULTI COLOUR PU PAINT AS PER ATTACH IMAGE. HEIGHT OF THE BIN WILL BE 700 MM. FISH BIN HAS CAPICITY OF 65 LTR plus 10%. BARCODE ON MACHINE TO SHOW THE PROPER USE OF MACHINE. WORKOUT CARD and DIET CARD SHOULD BE SHOW IN APP. CUSTOMER CAN BOOK HIS ASSESMENT FROM HIS LOCATION. ALL MUST BE COMPATIBLE IN IOS AND ANDROID FOR BOOK THE SLOT AND TICKETS. EQUIPMENT MUST BE MADE AND CONFIRMS WITH THE APPROVED STANDARDS CERTIFIED BY AND CERTIFICATES ARE MANDATORY REQUIRES IN THE NAME OF BOTH TENDERS ACT AS BIDDER AND MANUFACTURER. |
| 18 | BIRD BIN:- PRODUCT AREA: MINIMUM DIAMETER 400 MM. CAPACITY : 60 LTRS plus 10%. BIRD BIN IS MADE UP OF FIBER REINFORCEMENT PLASTIC. IT HAS MULTI COLOUR PU PAINT AS PER ATTACH IMAGE. HEIGHT OF THE BIN WILL BE 750 MM plus 5%. BARCODE ON MACHINE TO SHOW THE PROPER USE OF MACHINE. WORKOUT CARD and DIET CARD SHOULD BE SHOW IN APP. CUSTOMER CAN BOOK HIS ASSESMENT FROM HIS LOCATION. ALL MUST BE COMPATIBLE IN IOS AND ANDROID FOR BOOK THE SLOT AND TICKETS. EQUIPMENT MUST BE MADE AND CONFIRMS WITH THE APPROVED STANDARDS CERTIFIED BY AND CERTIFICATES ARE MANDATORY REQUIRES IN THE NAME OF BOTH TENDERS ACT AS BIDDER AND MANUFACTURER.1. IS 178012. ISO 180013. ISO 27001:20134. ISO 50001:20185. ISO 13485:20166. ISO 45001:20187. ISO 14001:20158. ISO 9001:20159. ISO 14001:200410. ISO 9001:200811. EN 1490412. EN-1176-1-201713. EN 16630:201514. EN 1663015. EN 95716. EN 9100:201617. EN 11630:201718. GS19. DIN 18032.220. DIN 79000-201221. CE CERTIFICATE22. CE 1199323. OHSAS 18001:201724. SLBR 6225. BIFMA26. GMP27. ROHS THE EQUIPMENT MUST ACCOMPAINED WITH TEST REPORT FOR QUALITY, SAFETY, DURABILITY AND PROPER FUNCTIONING OF EQUIPMENT MUST MANDATORY REQUIRES TEST REPORT IN THE NAME OF BOTH TENDERER ACT AS BIDDER AND MANUFACTURER.1. TEST REPORT OF SS NUT and BOLTS2. TEST REPORT OF LLDPE BASE CAPS FOR OPEN GYM3. TEST REPORT OF POWDER COATING PIPE4. TEST REPORT OF SKF BEARING NO. 6007-2Z5. TEST REPORT OF FRP/PLASTIC (FIBER PAD)6. TEST REPORT OF WELDING PIPE (ROBOTIC MIG WELDING)7. TEST REPORT OF MEK SOLVENT8. TEST REPORT OF NEUTRUL SALT SPRAY TEST9. TEST REPORT OF BREAKING LOAD OF WELDING PIPE10. TEST REPORT OF GI PIPE 100 MM NB11. TEST REPORT OF GI PIPE 80 MM NB12. TEST REPORT OF GI PIPE 50 MM NB13. TEST REPORT OF GI PIPE 32 MM NB14. TEST REPORT OF GI PIPE 25 MM NB |
| 19 | BIRD BIN:- PRODUCT AREA: MINIMUM DIAMETER 400 MM. CAPACITY : 60 LTRS plus 10%. BIRD BIN IS MADE UP OF FIBER REINFORCEMENT PLASTIC. IT HAS MULTI COLOUR PU PAINT AS PER ATTACH IMAGE. HEIGHT OF THE BIN WILL BE 750 MM plus 5%. BARCODE ON MACHINE TO SHOW THE PROPER USE OF MACHINE. WORKOUT CARD and DIET CARD SHOULD BE SHOW IN APP. CUSTOMER CAN BOOK HIS ASSESMENT FROM HIS LOCATION. ALL MUST BE COMPATIBLE IN IOS AND ANDROID FOR BOOK THE SLOT AND TICKETS. EQUIPMENT MUST BE MADE AND CONFIRMS WITH THE APPROVED STANDARDS CERTIFIED BY AND CERTIFICATES ARE MANDATORY REQUIRES IN THE NAME OF BOTH TENDERS ACT AS BIDDER AND MANUFACTURER. 1. IS 17801 2. ISO 18001 3. ISO 27001:2013 4. ISO 50001:2018 5. ISO 13485:2016 6. ISO 45001:2018 7. ISO 14001:2015 8. ISO 9001:2015 9. ISO 14001:2004 10. ISO 9001:2008 11. EN 14904 12. EN-1176-1-2017 13. EN 16630:2015 14. EN 16630 15. EN 957 16. EN 9100:2016 17. EN 11630:2017 18. GS 19. DIN 18032.2 20. DIN 79000-2012 21. CE CERTIFICATE 22. CE 11993 23. OHSAS 18001:2017 24 |
| 20 | JUMBO FOUR SEATER MERRY GO ROUND:- PRODUCT AREA: MINIMUM 2100 MM DIAMETER.SAFE PLAY AREA: MINIMUM 3700 MM DIAMETER. THE ARM IS MADE UP OF MINIMUM 40 NBandMINIMUM 20NB GI B-CLASS PIPE. STANDIS MADE UP OF MINIMUM 80 NB GI B-CLASS GI PIPE.THEARM IS MOUNTED ON HEAVY- DUTY BEARING SHAFT PERMANENTLY LUBRICATED WITH WATERSEALANT. CHARACTER – PLASTIC ELEPHANT OR ANY OTHER CHARACTER IS MADE OF LLDPEPLASTIC WITH ROTATIONAL MOULDING PROCESS. IT HAS INBUILT HANDLE, SEAT REST and BACKREST.BARCODE ON MACHINE TO SHOW THE PROPER USE OF MACHINE.WORKOUT CARD and DIET CARD SHOULD BE SHOW IN APP.CUSTOMER CAN BOOK HIS ASSESMENT FROM HIS LOCATION.ALL MUST BE COMPATIBLE IN IOS AND ANDROID FOR BOOK THE SLOT AND TICKETS.EQUIPMENT MUST BE MADE AND CONFIRMS WITH THE APPROVED STANDARDS CERTIFIEDBY AND CERTIFICATES ARE MANDATORY REQUIRES IN THE NAME OF BOTH TENDERS ACT ASBIDDER AND MANUFACTURER.1. IS 178012. ISO 180013. ISO 27001:20134. ISO 50001:20185. ISO 13485:20166. ISO 45001:20187. ISO 14001:20158. ISO 9001:20159. ISO 14001:200410. ISO 9001:200811. EN 1490412. EN-1176-1-2017 |
| 21 | Repair and Renovation of Sadbhavna park near kinderkin school model town in ward no. 20 at MC Panipat (Urban). Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 18, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 28, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysSep 28, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender