Tender For Provision Of Certain Works Services At C Prahar Site At Afa
Tender Value
43.41 Lakhs
Estimated cost
Bid Submission
08 Oct 2026
18 days left
EMD
86834
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Medchal Malkajgiri → Telangana
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provision Of Certain Works Services At C Prahar Site At Afa
BOQ
| Sl. No. | Item Description |
| 1 | Excavating in trenches n. exc 1.5 m width and n. exc 1.5 m in depth for foundation or etc or for shafts , wells , cesspits , manholes , pier holes etc n exc 10 sqm on plan and n exc 1.5 m in depth orgetting out in any type of soil, complete all as specified and as directed. |
| 2 | M & L cement concrete in foundation, filling and mass concrete type D-2, 1:4:8 mix using 40 mm graded stone aggregate, completed all as specified and directed. |
| 3 | M&L RCC 1:1/2:3 type B1 (20mm graded aggregate) for foundation including rafts footing ,foundation beams plinth beams bases for columns etc basement slab,under reamed piles and mass concrete |
| 4 | M&L RCC1:1/2:3 type B1 (20mm graded aggregate) for Columns, pillars, piers, posts and struts |
| 5 | M&L for pre-cast reinforced cement concrete 1:2:4, type B1 (using 20 mm graded stone aggregate), as in kitchen flatform and selfs in kitchen slabs, etc including necessary form work , complete all as specified and as directed. Set in CM 1:4 |
| 6 | M&L for RCC TypeB1 1:2:4 (using 20 mm graded aggregate) as in Beams/bands cantilevers, bressummers, chajjas , lintels over 1.5m span |
| 7 | Returning,filling in including spreading , levelling,watering and well ramming in layers not exc 25 cm |
| 8 | Removing excavated material exc. 1.50 km but n exc. 5 km and depositing where directed |
| 9 | M&L for mild steel TMT bars 10mm dia and over, cut to length bent to shape required including cranking, bending, spirally for hooping for columns, hooking ends and binding with and including MS wire (annealed) not less than 0.90 mm dia complete all as specified and as directed. |
| 10 | S&F mild steel TMT bar 6 mm to 8 mm dia. and over, cut to length , bent to shape as required, hooking ends and bining with and including mild steel wire (annealed) not less than 0.9 mm dia. Used in stirrups, spacers and binders, complete all as specified and directed. |
| 11 | Formwork to flat rough finished surfaces of conrete sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter fair finished surfaces. |
| 12 | Formwork to square rectangular rough finished surfaces of concrete sides of pillars, posts, struts, piers, columns and stanchions fair finished surfaces. |
| 13 | M& L for form works to sides and soffits of floor or roof beams, lintels, cantilevers, shelves including support , overhangs etc. for rough finished surfaces complete all as specified and directed. |
| 14 | S&F of Rolled sections of Fe-410-W (Gde-E-250) quality-B as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates |
| 15 | S&F plates (plain or corrugated) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment conforming to Fe-410(Gde-250) |
| 16 | S&F Mild screw bolts made with hexagonal or square heads at one end and screwed the other, or screwed both ends , each screwed end to be fitted with washers and one hexagonal or square nut, exc 30 cm long dia of shank 12 to 20mm. |
| 17 | S&F Mild screw bolts ( Machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends , each screwed end to be fitted with washers and one hexagonal or square nut, exc 22.5 but n exc 30 cm long dia of shank 16 to 20mm. |
| 18 | S&F Mild screw bolts ( Machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends , each screwed end to be fitted with washers and one hexagonal or square nut, n exc 50mm long dia of shank 11 to 15 mm. |
| 19 | S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, chajjas, fixed with self tapping screws as specified. |
| 20 | S&F Pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in ridge of roof covering/ cladding to wall, chajjas, valley gutter, fixed with self tapping screws as specified. |
| 21 | M&L for pre-cast cement concrete block masonry of type C1 1:3:6 (using 20mm graded stone aggregate) with solid blocks exc 10cm in width and setting in cement mortar 1:6 etc complete all as specified and as directed. |
| 22 | M&L for plastering in internal wall surfaces of 10 mm thick in CM 1:6 on fair faces of brick work or concrete surfaces finished even and smooth (without using extra cement) complete all as specified and directed. |
| 23 | M&L for plastering in external wall surfaces of 15 mm thick in CM 1:4 on fair faces of brick work or concrete surfaces finished even and smooth (without using extra cement) complete all as specified and directed. |
| 24 | Supply only Liquid water proofing compound. |
| 25 | M & L for two coats of oil bound distemper on newly plastered surface of walls applying 3 mm thick wall care putty and rubbing with sand paper to achieve a level and smooth to wall and applying two coats of distemper oil emulsion over a coat of primer complete all as specified and as directed. |
| 26 | M&L for preparation of newly plastered surfaces of external walls and applying two coats cement base paint over a coat of cement primer complete all as specified and directed. |
| 27 | M&L Hardcore of broken stone or boulders of guage exc 63mm but n exc. 100 mm, deposited, spread and lev- elled in layers n exc. 15 cm thick, watered and rolled/ rammed to a true surface |
| 28 | M&L 75 mm thick PCC (1:4:8) type D2 (40 mm graded aggregate) as in sub base for floors all as specified and as directed. |
| 29 | M&L 30 mm thick PCC (1:2:4) type B0 (12.5 mm graded aggregate)as in sub base of floors all as specified and as directed. |
| 30 | M & L for Machine cut kota stone slab flooring 20-25mm thick over 20 mm thick in cm 1:4 cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete |
| 31 | M&L for Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar including 10mm thick backing plaster in cement mortar (1:3) complete all as specified and directed. |
| 32 | Material and labour 75 mm thick plain cement concrete 1:2:4 type C2 using 20mm graded stone aggregate as in plinth protection etc., finished even and smooth without using extra cement complete all as specified and as directed. |
| 33 | M&L for forming Consturction joints 30 mm deep x 10 mm wide, filled with sealing compound Grade B. |
| 34 | M&L preparation of new steel surface of any description over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide/zinc chrome primer complete all as specified and as directed. |
| 35 | Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P.brass/ stainless steel screws, all complete as per architectural drawings all as specified and directed. |
| 36 | S & F Powder coated aluminium (minimum thickness of powder coating 50 micron) for type of shutters(hung/sliding) of doors, windows, ventilators, including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections / appropriate Z sections and other sections of aproved make conforming to IS- 733 and IS- 1285, with dash fasteners of required dia and size, including neccessary filling up the gaps at junctions, i.e. at top, bottom ad sides with required EPDM rubber / neoprene gasket etc. Aluminium section shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing / paneling, CP brass / stainless steel screws, all complete as per architctural drawigs all as specified and directed. |
| 37 | S & F for framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework ofwater tanks and similar work conforming to Fe.290.Gde-E-165 |
| 38 | Providing and fixing of 100% Solid WPC ( Wood polymer Composite ) frames single pattam (size (65x100mm) comprising of virgin PVC resin, Calcium Carbonate and natural Fibres (Wood Powders/ rice husk/ wheat husk ) and Non-toxic additives, made from Extrusion process WPC foam sheet Single Extruded (Inner ). Water/ Moisture Proof, Fire Retardant. As per direction of Engineer -In-Charge. |
| 39 | M & L 30 mm thick 100% Solid WPC ( Wood polymer Composite ) Plain Board of required size comprising of virgin PVC resin, Calcium Carbonate and natural Fibres (Wood Powders/ rice husk/ wheat husk ) and Non-toxic additives, made from Extrusion process WPC foam sheet Single Extruded (Inner ). Water/ Moisture Proof, Fire Retardant. all as specified and directed. |
| 40 | S&F 300 mm long aluminium alloy, sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts all as specified. |
| 41 | S&F for aluminium anodized barrel tower bolts 200 mm of extruded section and fixed. |
| 42 | S&F 150 mm size aluminium alloy handles, febricated type extruded section, ISI marked all as specified. |
| 43 | S&F of butt hinges, medium weight, cold rolled mild steel of 100 mm long. |
| 44 | M & L for MS flat for hold fast. Conforming to Fe-290 Gde E-165 |
| 45 | S&F 150 mm long floordoor stopper of brass body and tongue with hard drawn steel spring all as specified |
| 46 | S & F sheet glass of 5.50mm thick selected quality in square and exceding 0.5 Sqm in each pane. |
| 47 | M&L for cutting the existing hardstanding/PCC/WBM road etc. surfaces at a depth of not less than 100 cm & 45 cm in width for laying of upto 100 mm dia GI Pipe incl returning filling in, complete incl finishing the surfaces by providing cement concrete type B1 (1:2:4) with 20 mm graded aggregate upto 20 cm, finishing to a uniform smooth surface & removal of surplus soil complete all as specified and as directed & to the entire satisfaction of Engr-In-Charge. |
| 48 | Excavation in trenches in any kind of soil n.exc 1.5m wide and n.exc 1.5m in depth for laying of new HT / LT UG Cables etc. complete all as specified and as directed. Please Enable Macros to View BoQ information |
| 49 | Excavation in trenches in any kind of soil n.exc 1.5m wide and n.exc 1.5m in depth for laying of new HT / LT UG Cables etc. complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 18, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 08, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysOct 10, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 20 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender