Tender For Provision Of Certain Minor Works At Various Location At Afa Hyderabad
Tender Value
23.92 Lakhs
Estimated cost
Bid Submission
08 Oct 2026
16 days left
EMD
47859
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Medchal Malkajgiri → Telangana
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provision Of Certain Minor Works At Various Location At Afa Hyderabad
BOQ
| Sl. No. | Item Description |
| 1 | M & L for preparing old plastered or unplastered surfaces of walls including cornices by washing, rubbing down and stopping and applying one coat of distemper oil emulsion including filling cracks/undulated surfaces with wall care putty wherever required complete all as specified and directed by Engineer-in-Charge. |
| 2 | S&F Framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc.. n exc 10 kg each brackets, conforming to Fe.290.Gde-E-165 (Brackets over 10 kg each to be measured under 'Structural Steel') |
| 3 | S&F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment |
| 4 | M&L applying two coats of synthetic enamel paint over a coat of red oxide or zinc chromate primer including preparation of new steel or iron surfaces exc 10 cm width or girth, complete as as speciied. |
| 5 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises to a distance exc 1.5 km but not exc 5 km where directed |
| 6 | M&L screed bed or bedding layer of 15mm thick in Cement mortar 1:6 for floor finished complete all as specified. |
| 7 | M&L Vitrified coloured Ceramic tiles (any shade)10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed 3 to 4mm spacers and filling with epoxy mortar complete all as specified and directed by Engineer-in-charge |
| 8 | M&L Vitrified coloured Ceramic tiles (any shade)10 mm thick (square/ rectangular) polished, area of each tiles exceeding .42sqm and not exceeding 1.00 sqm, in floors etc. set and jointed 3 to 4mm spacers and filling with epoxy mortar complete all as specified and directed by Engineer-in-charge |
| 9 | M&L rendering 10mm thick in CM 1:4 as backing to tiles in skirting/dado etc |
| 10 | M&L Vitrified Ceramic tiles (light shade)10 mm thick (square/ rectangular) polished, area of each tiles exceeding .42sqm and not exceeding 1.00 sqm, as in skirtings etc. set and jointed 3 to 4mm spacers and epoxy mortar including pvc lining in corners complete all as specified and directed by Engineer-in-charge |
| 11 | M&L for pre-cast cement concrete block masonry of Type C1 1:3:6 (using 20mm graded stone aggregate) with solid blocks, exc. 10 cm in width and setting in cement mortar 1:4 etc complete all as specified and directed by Engr-in-Charge. |
| 12 | M & L for Rendering 10 mm thick on fair faces of brick work or concrete wall surfaces in CM 1:6 surface finished even & smooth without using extra cement complete all as specified. |
| 13 | M&L for applying two coats of Oil bound distemper on walls including reparation of new plastered surfaces over a coat of primer complete all as specified and as directed. |
| 14 | Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in hard / dense soil. |
| 15 | M&L for hardcore of gauge n exc. 63 mm of broken stone boulders, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface. |
| 16 | M&L for PCC 1:4:8 type D2 (using 40mm graded stone agg) 75mm thick as in floor sub base etc as specified directed. |
| 17 | M&L for Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed. |
| 18 | M & L for providing cement concrete PCC 1:2:4 type B-1 mix using 20 mm graded stone aggregate as in kerbs, stoppers, edge stones etc including use of necessary formwork, straight or curved, finishing exposed surfaces etc complete all as specified and directed.. |
| 19 | M & L for cement concrete Type B0 1:2:4 (12.5 mm graded aggregate) as in copings/ post hole filling as directed |
| 20 | M&L for Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in Hard/Dense Soil complete all as specified and directed. |
| 21 | M&L for PCC 1:4:8 type D2 using 40mm graded stone aggregate as in foundation, filling and mass concrete complete all as specified and as directed.. |
| 22 | M&L rendering 15 mm thick in cement plaster 1:4 on fair faces of PCC block masonry or concrete surfaces finished even and smooth without using extra cement all as specified and directed by Engr-in-Charge. |
| 23 | Extra forming fair finished drain or channel 40cm/50cm inner girth in cement concrete using extra cement including forms, moulds, mi-tried/ stopped ends etc. complete all as specified and as directed. |
| 24 | M&L cement concrete1:2:4, type B2, using 40mm aggregate in surface channel and drains etc. as specified and directed. |
| 25 | Excavating over areas, n exc 1.5 m deep and getting out soft/loose soil complete all as specified and directed by Engr-in-Charge. |
| 26 | All as per item no 25 above but exceeding 1.50mtr but not exceeding 3mtr complete all as specified and directed by Engr-in-Charge. |
| 27 | M&L for Loose filling with aggregates of gauge not exc 40 mm to in soakage pits, soakage wells etc complete all as specified and directed by Engr-in-Charge. |
| 28 | M&L for loose filling with course sand in trenches / foundations including watering and consolidation complete all asspecified and directed by Engr-in-Charge. |
| 29 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed. |
| 30 | Removing excavated soil n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed. |
| 31 | M&L Drilling 6'' (150mm) bore , holes by rotatary drilling method below GL in any type of soil incl disposal and surplus soil to outside md land complete all as specified by Engineer-in-charge |
| 32 | S&F Plastic PVC pipe of pressure rating 6kg / CM2 150mm dia, ISI mark in standard length, complete all as specified by the Engineer-in-charge |
| 33 | As per Item no 32 above but sloted pipe having 2.3mmX7.5mm slot complete with necessary fitting jointed complete all as specified by the Engineer-in-charge . |
| 34 | S&F PVC wellcap 6'' (150mm ) bore mild steel ARW Pipe having internal threads and width welde iron handles and fixed in position complete all as specified by the Engineer-in-charge . |
| 35 | S & F Mild Steel works as in Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all asspecified and directed by Engr-in-Charge. |
| 36 | S&F Expanded metal not exc 4.00kg/sqm, cut to length, bent to shape required and tying with and including annealed mild steel wire not less than 0.9mm dia or fixing with galvanised steel staples supplied and fixed complete to wood or steel members |
| 37 | S&F of Structural Steel Framed work as in doors or gates of angle or other sectionwith gusset plates, rails, braces, valley gutters, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) but including and hanging; also fastening and fixing complete all as specified and directed. |
| 38 | S&F Pre-painted galvalume aluminium zinc coating GI-based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 MPa as in roof covering/cladding to wall, fixed with self-tapping screws including necessary joint filling with silicon & minimum overlap of 150mm, complete all as specified and as directed by Engineer-in-charge. Note : No extra payment will be given for overlap. the rate shall be deemed to including the same |
| 39 | M&L for preparation of new surfaces plastered or unplastered walls and applying two coats of cement base paint over a priming coat all as specified and directed. |
| 40 | Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fitting and accessories) complete all as specified and directed by Engr -in- charge. |
| 41 | S&F PVC (SWR) pipes 110 mm bore single socketed in any length with rubber ring joints fixed on walls complete all as specified and directed |
| 42 | S&F PVC (SWR) bends any radius suitable for 110mm bore pipecomplete all as specified and directed |
| 43 | S&F stack clamps out of 50 mm by 5 mm flat iron and 16 mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 100 mm dia bore of pipe. |
| 44 | S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket,Aluminum sections shall be smouth, rust free,straight,mitredand jointed mechanically wherever required including cleat angle,aluminum snap beading for glazing / paneling,CP, brass,stainless steel section,all complete as per architectural drawings and the direcions of Engineer - in-charge. |
| 45 | S&F powder coated aluminium door shutters, aluminium section weighing not less than 0.55 Kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading screws etc, complete all as specified (Powder coating should not be less than 50 micron) direcions of Engineer - in-charge. |
| 46 | M&L for 12 mm thck Prelaminated particle board, high density exterior grade, prelaminated Both side with decorative choice laminations, fixed with screws to timber,MS/aluminum frame work doors/partition, direcions of Engineer - in-charge. |
| 47 | S&F 5.5mm Sheet glass (tinted), selected quality, in squares of any size complete all as specified,direcions of Engineer - in-charge. |
| 48 | S & F door closer, hydraulically regulated, aluminium body designation No 2 universal type (ISI marked), suitable for shutters of weight between 36 to 60 Kg fixed in repairs complete all as specified and as directed |
| 49 | S&F of Mortice lock, of brass 4 levers vertical type of size 100 mm etc complete. |
| 50 | M&L 75mm thick PCC 1:2:4 type B1 using 20mm graded stone aggregate for flooring, Hardstanding, Pavings surface finished fair and even complete all as specified and directed. |
| 51 | M & L for 75mm thick PCC (1:3:6) type C-2 using 40mm graded aggregate as in sub-floors/sub base all as specified and directed by Engr-in-Charge. |
| 52 | M&L for Chequered cement concrete coloured tiles 30cm x30cm x 25mm thick, with grey cement and pigments, set, jointed and pointed in neat cement slurry in floors laid over 20 mm thick screed in cement mortar 1:6 all as specified and directed by Engr-in-Charge. |
| 53 | S & F Glazed Vitrified coloured tiles 10 mm thick of any shade, polished area of each tile n exc 0.36 sqm set and jointed in neat cement slurry and pointed in white or coloured cement to match in skirting/dado including screed and spacer (3 to 4mm ) plaster of mortar 10 mm thick in cement mortar 1:4 and filing the gap with epoxy mortat complete all as directed. Please Enable Macros to View BoQ information 333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333 33333.0 3333.0 3333333.0 3.33333333333333e+98 33333333333333.0 3.33333333333333e+52 |
AI Tender Summary
Tender Timeline
Sep 18, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 08, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 16 daysOct 10, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 18 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender