Tender For Provn Of Grease Trap For Mess And Associated Works At Afac Coimbatore.
Tender Value
10.32 Lakhs
Estimated cost
Bid Submission
08 Oct 2026
13 days left
EMD
20640
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Coimbatore → Tamil Nadu
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provn Of Grease Trap For Mess And Associated Works At Afac Coimbatore.
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation in soft disintegrated soil by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and for all lift, as directed . |
| 2 | Material & Labour for PCC 1:4:8 type D2 using 40mm graded stone aggregate as in foundation complete all as specified and directed. |
| 3 | Material & Labour for Pre cast cement concrete block masonary with solid blocks exc 10 cm in width in PCC 1:2:4 type B-1 using 20 mm graded stone aggregate and setting in CM 1:4 complete all as specified and directed. |
| 4 | Material and labour 15mm thick cement plaster in CM 1:4 for wall finished even & smooth without using extra cement, including WPC complete all as specified and directed. |
| 5 | Material & Labour for precast cement concrete 1: 2:4 type B1 in in landings, for fixing cover slabs frame (for manholes etc.) with plain faces and setting in mortar 1:4 complete with joints to match complete all as specified and directed. |
| 6 | Material & Labour for PCC (1:3:6) type C-1 (using 20 mm graded stone aggregate) as in coping including weathering, slightly rounded or chamfered angles and necessary form work complete all as specified and directed. |
| 7 | Supply only Liquid water proof compound complete all as specified and directed. |
| 8 | Disposal of excavated soil/ moorum/building rubbish/ malba/ similar nserviceable, dismantled or waste material by mechanical transport including loading, ransporting, unloading to approved municipal dumping ground for lead upto 10 km for all lifts, complete as per directions of Engineer-in-charge.Note - Item to be applicable in urban areas having directions for restricted hours for movement/ plying of load carrying motor vehicle of 3.5 cum or more complete all as specified and directed. |
| 9 | Providing and placing in position 100 mm thick factory made machine batched & machine mixed Precast RCC Rectangular Covers on drains of footpath of various sizes, of M-25 grade cement concrete for RCC work, including cost of centering, shuttering, reinforcement of 8 mm dia TMT bars of Fe 500 grade @ maximum 100 mm c/c on both ways, neat cement punning on finished surface, properly encased on all edges with 1.6 mm thick, 100 mm wide MS sheet duly painted over priming coat, reinforcement to be welded at edges with MS sheet and providing 2 Nos. 12 mm dia bar for hooks etc including cost of cartage, all leads & lift, handling at site etc.complete all as specified and directed. |
| 10 | Material & Labour for PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in bed to drain pipes 150mm dia including packing under and haunching against the sides of pipes after they are laid and tested all as specified. |
| 11 | Material & Labour for PVC (SWR) 150 mm dia laid and jointed complete with collars complete all as specified and directed. |
| 12 | Supply & Fixing for 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed in wall/ floor with necessary clamping where required complete all as specified and directed. |
| 13 | Supply & Fixing for 110 mm dia PVC vent cowl complete all as specified and directed. |
| 14 | S & F 1000Lit Capacity PVC Grease trap of Compact design, 100 % watertight structure made with chemical resistance to aggressive grease acids and provided with bucket for solid waste disposal and cover chambers all as specified by manufacturer instructions complete all as specified and directed.Make : Supreme or equivalent in Ashirwad pipes/ Ocean Polymer IndustriesNote : Grease trap will fix below ground level |
| 15 | Excavation in trenches n.exc 1.50 metre wide and n.exc 1.5 metre deep and getting out in hard / dense soil complete all as specified and directed. |
| 16 | Material & Labour for PCC (1:3:6) type C-2 using 40mm graded stone aggregate as in foundation complete all as specified and directed. |
| 17 | M & L for cement concrete in copings, bands, etc. PCC 1 : 2 : 4 type B0 (12.50 mm graded stone aggregate) including necessary form work, weathering, slightly rounded or chamferred angles and throating complete all as specified and directed. |
| 18 | M & L for Rendering in CM 1:4, 15 mm thick on other than fair faces of brick work or concrete surfaces finished with even and smooth without using extra cement complete all as specified and directed. |
| 19 | Returning , filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm in soil complete all as specified and directed. |
| 20 | Disposal of excavated soil/ moorum/building rubbish/ malba/ similar nserviceable, dismantled or waste material by mechanical transport including loading, ransporting, unloading to approved municipal dumping ground for lead upto 10 km for all lifts, complete as per directions of Engineer-in-charge.Note - Item to be applicable in urban areas having directions for restricted hours for movement/ plying of load carrying motor vehicle of 3.5 cum or more complete all as specified and directed. |
| 21 | Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement including forms, mounds etc. complete all as specified and directed. |
| 22 | Material & Labour for Cement concrete Type C2 1:3:6 (20mm graded aggregate) in surface channels and drains complete all as specified and directed. |
AI Tender Summary
Tender Timeline
Sep 18, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 08, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 13 daysOct 16, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 21 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender