Tender For Certain B/R Repair And Internal Electrification To Otm/Md Accn In Aor Of Age B/R-I Under Ge(West) Ferozepur
Tender Value
Ref. Documents
Estimated cost
Bid Submission
06 Oct 2026
7 days left
EMD
70000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Firozepur → Punjab
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Certain B/R Repair And Internal Electrification To Otm/Md Accn In Aor Of Age B/R-I Under Ge(West) Ferozepur
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling existing PVC tanks of capacity exceeding 250 Litres but not exceeding 500 litres, removing from site complete all as specified and directed. |
| 2 | Dismantling existing PVC tanks of capacity exceeding 500 Litres but not exceeding 1000 litres, removing from site complete all as specified and directed. |
| 3 | Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed. |
| 4 | Dismantling boarding, any description, fixed in any postion with nails or screws complete all as specified and directed. |
| 5 | S&F EPDM Rubber beading around glass in aluminium windows /ventilator shutters, complete all as specified and directed. |
| 6 | S&F 18mm Solid PVC board plain colour ,fixed with screws or adhesive with complete accessories (magnetic catcher, knobs) as in shelves/shutters with rebates fixed on PVC on three sides as in supporting block to shelves complete all as specified and directed. |
| 7 | S&F 18mm thick Prelaminated particle board, exterior grade, prelaminated with one side decorative face of laminations, flat pressed, single or three layer type with BWP type phenol formaldihide adhesive as in cupboard /wardrobe shutters complete all as specified and directed. |
| 8 | S&F 6mm thick Plywood, 5 Nos of ply, grade BWR, type BB fixed with Steel/Wooden framework complete all as specified and directed. |
| 9 | S&F Ball bearing runners 45mm Telescopic, full extension load capacity 50 Kgs, Complete all as directed by Engineer-in-Charge. |
| 10 | S&F stainless steel handles 100mm size for kitchen cabinet shutters complete all as directed by Engineer-in-Charge. |
| 11 | S&F chrome plated stainless steel wire basket (storage basket) pull out type for large utensils, size 795mmx500mmx150mm with necessary fixing clips steel screws etc complete all as specified and directed. |
| 12 | S&F chrome plated stainless steel wire basket (Plate basket) pull out type, size 530mmx500mmx100mm with necessary fixing clips steel screws etc complete all as specified and directed. |
| 13 | S&F chrome plated stainless steel wire basket (Cutlery basket) pull out type, size 380mmx500mmx100mm with necessary fixing clips steel screws etc complete all as specified and directed. |
| 14 | S&F chrome plated stainless steel wire basket (Grain trolley) pull out type, size 380mmx500mmx100mm with necessary fixing clips steel screws etc complete all as specified and directed. |
| 15 | S&F chrome plated stainless steel wire basket (Thali basket) pull out type, size 530mmx500mmx100mm with necessary fixing clips steel screws etc complete all as specified and directed. |
| 16 | S&F 100mm size butt hinges of extruded aluminium alloy with galvanised steel hing pins, anodised and type B-21 complete all as specified and directed. |
| 17 | S&F 150mm long aluminium anodised barrel tower bolts of extruded section and fixed with steel screws complete all as specified and directed. |
| 18 | S&F 200mm long aluminium anodised barrel tower bolts of extruded section and fixed with steel screws complete all as specified and directed. |
| 19 | S&F 150mm size aluminium door handle, extruded aluminium alloy, fabricated type complete all as specified and directed. |
| 20 | S&F stainless steel continous (piano) hinges of mild steel bright finish or electro galvanised with flap (when open) 40mm, fixed with steel screw complete all as specified and directed. |
| 21 | S&F 300mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and directed. |
| 22 | S&F Floor door stopper with 150mm overall length of cover plate made out of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed, |
| 23 | S&F in repairs 100mm size, 4-Lever Aluminium Mortice lock, vertical type complete all as specified and directed. |
| 24 | S&F in repairs Aluminium body hydraullically regulated door closer universal type, suitable for door shutters of 851 to 1000mm width & of weight between 61 to 80kg complete allas specified and diected. |
| 25 | S&F in repairs 10mm thick, plain sheet glass, Selected quality and glazing, with oil putty or with wooden/ EPDM Rubber beads (supplied alongwith shutters), in squares exceeding 0.50 Sqm in each pane complete all as specified and directed. |
| 26 | S&F in repairs 3.0mm thick, plain sheet glass, ordinary quality and glazing, with oil putty or with wooden beads (supplied alongwith shutters), in squares n.exc 0.50 Sqm in each pane complete all as specified and directed. |
| 27 | S&F 3.0mm thick, figured glass, pin headed type and and glazing, with oil putty or with wooden beads (supplied alongwith shutters), in squares n.exc 0.50 Sqm in each pane complete all as specified and directed. |
| 28 | S&F 5.5mm thick, plain sheet glass, ordinary quality and glazing, with oil putty or with wooden beads (supplied alongwith shutters), in squares exceeding 0.50 Sqm in each pane complete all as specified and directed. |
| 29 | S&F 75mm bore PVC (SWR) pipe single socketed, in any length with rubber ring joints, fixed to walls or floors complete all as specified and directed. Note:- Only Pipe along the centre line shall be measured and paid except fittings and accessories which shall be measured and paid for separately under respective items.) |
| 30 | S&F 110mm bore PVC (SWR) pipe single socketed, in any length with rubber ring joints, fixed to walls or floor complete all as specified and directed.Note:- Only Pipe along the centre line shall be measured and paid except fittings and accessories which shall be measured and paid for separately under respective items.) |
| 31 | S&F 75mm dia PVC (SWR) bends any radius complete all as specified and directed. |
| 32 | S&F 110mm dia PVC (SWR) bends any radius complete all as specified and directed. |
| 33 | S&F in repairs 75mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed. |
| 34 | S&F 20mm outer diameter CPVC pipes SDR 11 with and including Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed. (Note:- Special fittings shall be measured and paid for as \\"S&F\\" separately . |
| 35 | S&F special fittings of Brass elbow for 20mm outer diameter CPVC pipes SDR 11 & plain CPVC SDR 11 complete all as specified and directed. |
| 36 | S&F special fittings of Brass Tee for 20mm outer diameter CPVC pipes SDR 11 & plain CPVC SDR 11 complete all as specified and directed. |
| 37 | S&F special fittings of Male Brass Threaded Adaptor (MTA/ MBTA) for 20mm outer diameter CPVC pipes SDR 11 & plain CPVC SDR 11 complete all as specified and directed. |
| 38 | S&F special fittings of Female Brass Threaded Adaptor (FTA/ FBTA) for 20mm outer diameter CPVC pipes SDR 11 & plain CPVC SDR 11 complete all as specified and directed. |
| 39 | S&F special fittings of Tank Adaptor for 20mm outer diameter CPVC pipes SDR 11 & plain CPVC SDR 11 complete all as specified and directed. |
| 40 | S&F special fittings of Union for 20mm outer diameter CPVC pipes SDR 11 & plain CPVC SDR 11 complete all as specified and directed. |
| 41 | S&F 15mm bore Galvanised Medium Grade Steel Water Tubing with all fittings and connections fixed complete to walls and celling or laid in floor, laid in trenches complete all as specified and directed. |
| 42 | S&F 20mm bore Galvanised Medium Grade Steel Water Tubing with all fittings and connections fixed complete to walls and celling or laid in floor, laid in trenches complete all as specified and directed. |
| 43 | S&F 15mm bore Bib Taps, fancy type, chromium plated, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or brass ferrule complete all as specified and directed. |
| 44 | S&F in repairs 15mm bore fancy type, chromium plated, Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed. |
| 45 | S&F in repairs 15mm bore fancy type, chromium plated, Stop valves, cast copper alloy, with long shank and cup concealed type, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed. |
| 46 | S&F in repair 15mm bore Angle stop valve of PTMT any colour high pressure screwed for iron pipe and fixed, (Minimum weight 15mm-90gms) complete all as specified and directed. |
| 47 | S&F in repair 15mm bore dia Bib tap standard of PTMT any colour high pressure screwed for iron pipe but with long body and fixed.(Minimum weight 15mm-90gms complete all as specified and directed. |
| 48 | S&F in repair pressure Jet spray of chromium plated steel for EWC seats with and including including PVC connection and CP fittings complete all as specified and directed. |
| 49 | S&F in repairs 15mm bore Pillar Taps, fancy type, chromium plated, cast copper alloy, with capstan heads, screwed down high pressure, with or without lettered 'HOT' or 'COLD' with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed. |
| 50 | S&F in repairs 32mm bore PVC waste pipe of suitable length to waste coupling pipe attached with rubber ring joints/ PVC threaded cup, fixed to waste coupling of sinks / WHBs/urinal of required length complete all as specified and directed. |
| 51 | S&F in repairs 32mm bore Waste fittings of chromium plated brass for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed. |
| 52 | S&F in repairs 15mm PVC connections 450mm long heavy duty with brass nuts adaptors and washers and rubber gaskets at both ends complete all as specified and directed. |
| 53 | S&F 500 litres capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top), three layered, ISI marked, hoisted & fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc. hoisted and fixed complete as specified in SSR Part-I. complete all as specified and directed. |
| 54 | S&F 1000 litres capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top), three layered, ISI marked, hoisted & fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc. hoisted and fixed omplete as specified in SSR Part-I. complete all as specified and directed. |
| 55 | S&F in repars 20mm bore Ball valves high pressure of PTMT withepoxy coated Aluminium rod & high density plastic float ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 20mm-210gms./25mm-455gms/ 40mm- 690 gms) complete all as specified and directed. |
| 56 | S&F 20mm bore Ball valves high pressure of PTMT withepoxy coated Aluminium rod & high density plastic float ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 20mm-210gms./25mm-455gms/ 40mm- 690 gms) complete all as specified and directed. |
| 57 | S&F in repairs Wash Hand Basins, Vitreous China (flat back) white of size 550mm X 400mm including cutting for and pinning in ends of brackets or erecting stand including waste fittings, 32 mm bore PVC flush pipe with long screwed shucks and fly nuts and including PVC discharge pipe complete all as specified and directed. |
| 58 | S&F in repairs Vitreous China Squatting Pan, \\"Orissa pattern\\", size 580x440mm white/ coloured with integral foot rests (excluding flushing cistern, flush pipe and waste pipe), including trap and connection to trap, and to flushing pipe, anti-syphonage pipe, etc.complete including all joints and making good to floors complete all as specified and directed. |
| 59 | S&F in repairs Vitreous China Wash Down Water Closet Pan (pedestal pattern) complete, white/ coloured including seat and cover, trap, including connection to drain (or outgoing pipe), and to flushing pipe, anti-syphonage pipe, etc. etc.complete including all joints and making good to floors complete all as specified and directed. |
| 60 | S&F in repairs 10 litres capacity low level PVC valveless syphonic action type flushing cistern with inlet ball valve, float and flush handle complete all as specified and directed. |
| 61 | S&F in repairs PVC Syphon Kit fitting, ball valve with float with washer and handle for 10 litres capacity low level Vitreous valveless syphonic action type flushing cistern Monolithic or Cascade type including EPDM rubber washer complete all as specified and directed. |
| 62 | S&F in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15mm dia pipe with 1.25m long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified complete all as specified and directed. |
| 63 | S&F Corner glass shelves 225mm radius,6mm thick as per sample for bath room, fixed on suitable support all as directed complete all as specified and directed. |
| 64 | S&F in repairs brass spindle with washers for 15mm bore for CP brass fancy bib tap, pillar tap, angle valves, mixers etc complete all as specified and directed. |
| 65 | S&F in repairs CP brass Handle with washers for 15mm bore CP brass fancy bib tap, pillar tap, mixers etc complete all as specified and directed. |
| 66 | S&F in repairs sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs,washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed. |
| 67 | S&F in repair Stainless steel plate rack of standard pattern & of size 750 x 600 x 250 mm.The thickness of stainless steel sheet shall be 1.00 mm & grade of sheet shall be 304 AISI including fixing to wall with 4 Nos 50mm screws & PVC rawl plugs complete all as specified and directed. |
| 68 | S&F in repairs 100 mm dia Chromium plated brass shower rose with 125mm long CP arms, with or without swivel joints, including fixing complete to steel pipe or union complete all as specified and directed. |
| 69 | S&F in repairs 600mmx1350mm size Verticle Looking Mirror (Dressing Mirror)of specified thickness looking mirror, bevelled edge of selected quality glass with aluminium frame made of channel around, mounted on 6mm thick commercial ply or AC building board, fitted to wooden plug with chromiumplated brass screws and cup washers complete all as specified and directed. |
| 70 | S&F in repairs factory made PVC body toilet cabinet (box type) 600x450mmx125mm size with mirror of selected quality glass having 5.5mm thickness and fixed to walls with screws and wooden/rawl plugs complete all as specified and directed. |
| 71 | S&F in repairs 20mm dia Aluminium Anodised tubular Towel Rail 600mm long between flanges type \\"D\\", with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 190gms)complete all as specified and as directed. |
| 72 | S&F in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed. |
| 73 | S&F in repairs Chromium plated Soap dish of stainless steel of size 160x160mm x 1mm thick, fixed to wall with CP brass screws and PVC gutties complete all as specified and directed. |
| 74 | S&F in repairs CP brass Toilet Paper Holder with Flap fixed to wall with CP brass screws and PVC gutties complete all as specified and directed. |
| 75 | S&F one piece Vitreous china wash down water closet pan (pedestal pattern)white/coloured cascade type640X360X690 (monolithic flush cistern type) Make: Jaquare Model NO:SLS WHT-6853S/CERA Cat No: s1013132 s single picece wc with PP seat cover ,Hinges fixing accessories set including flush cistern with S-Trap of size 220mm all as per manufacturing instructions and all as specified and directed. |
| 76 | S&F wall hung vanity type wash hand basin cabinet of size 805x450 mm with wash basin (white) complete all as specified and directed. |
| 77 | S&F in repair Towel Ring of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90gms) complete all as specified and directed. |
| 78 | S&F in repair Plastic water closet Seat Cover (Whitecolour), black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging deviceSeat Cover for pedestal pattern complete all as specified and directed. |
| 79 | S&F in repairs 20mm dia stainless steel curtain rod with fancy type brackets (steel) including with all fittings as fixed in repairs and all as specified and directed. |
| 80 | S&F in repairs 20mm dia mild steel epoxy powder coated curtain rod with fancy type brackets including with all fittings rings @ 10 nos per RM , bulbs, finials, fixed with PVC rawl plugs and CP steel screws complete all as specified and directed. |
| 81 | S&F central hole basin mixer for wash hand basin including all fittings ie including connection pipe as per manufactures specification complete all as specified and directed. |
| 82 | S&F 15mm bore chromium plated brass Wall mixer wall ( over head shower type) mounted for mixing hot and cold water screwed down for pipe with provision of overhead shower complete with 115 mm long bend pipe on upper side, connecting legs and wall flange complete all as per manufacturer's instruction and as directed. |
| 83 | S&F in repairs 15mm bore chromium plated brass Wall mixer wall (over head shower type) mounted for mixing hot and cold water screwed down for pipe with provision of overhead shower complete with 115 mm long bend pipe on upper side, connecting legs and wall flange complete all as per manufacturer's instruction and as directed. |
| 84 | Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. complete all as specified and directed. |
| 85 | Taking down carefully by unscrewing from boards/ outlet boxes, fittings and fixtures such as switches, sockets, ceiling roses, lamp holders, brackets, ceiling fittings, bulk head fittings, tube light fittings and regulators, etc. for reuse at site or carrying to the store (To be measured only when found serviceable in all respects complete for reuse) complete all as specified and directed. |
| 86 | M&L for point wiring with PVC insulated unsheathed single core FRLSH multistranded copper conductor cable IS-694 marked of size 1.5 Sqmm (nominal area) drawn in and through including non metallic rigid heavy duty PVC conduit with all accessories if require such as bends,reducers, spacers, saddles, junction boxes bakelite sheets, wooden rectangular boards / round blocks(for housing lamp holders and light fittings etc) and new CI/MS/GI sunken boxes of suitable size for mounting switches / bell pushes / sockets, fan regulator etc covered with new 3 mm thick laminated bakelite sheet top cover including continuous earth wire cable of size 1.5 Sqmm unsheated stranded copper conductor with green PVC FRLSH insulation connected to common earth dolly complete all as specified and directed for One light/fan/Bell Point controlled by one single pole one way switch. Note:- Cutting chases for conduits and sunken boxes and making good to walls, floors etc, in case of recessed and concealed conduit wiring are included in item of taking down point wiring carefully. Switches, ceiling roses, pendants, regulators, sockets, bell push and bells shall be measured and paid for separately. |
| 87 | ditto all as per item No 86 but for One 3 pin socket outlet 5/6 Amp on the same board controlled by one single pole one way switch |
| 88 | ditto all as per item No 86 but for One 5/6 Amps socket outlet independent controlled by one single pole 5/6 Amp switch. |
| 89 | M&L for point wiring with PVC insulated unsheathed single core FRLSH multistranded copper conductor cable IS-694 marked of size 2.5 Sqmm (nominal area) drawn in and through including non metallic rigid PVC conduit with all accessories if require such as bends,reducers, spacers, saddles, junction boxes bakelite sheets, wooden rectangular boards / round blocks(for housing lamp holders and light fittings etc) and new mild steel pressed / cast iron sunken boxes of suitable size for mounting switches / bell pushes / sockets, fan regulator etc covered with new 3 mm thick laminated bakelite sheet top cover including continuous earth wire cable of size 2.5 Sqmm unsheated stranded copper conductor with green PVC FRLSH insulation connected to common earth dolly complete all as specified and directed for one 3/5 pin 15/16 Amps switch socket out let on the independent board controlled by one single pole one way switch. Note:- Cutting chases for conduits and sunken boxes and making good to walls, floors etc, in case of recessed and concealed conduit wiring are included in item of taking down point wiring carefully. |
| 90 | M&L for point wiring with PVC insulated unsheathed single core FRLSH multistranded copper conductor cable IS-694 marked of size 1.5 Sqmm (nominal area) drawn in and through existing non metallic rigid PVC conduit with all accessories if require such as bends,reducers, spacers, saddles, junction boxes bakelite sheets, wooden rectangular boards / round blocks(for housing lamp holders and light fittings etc) and existing mild steel pressed / cast iron sunken boxes of suitable size for mounting switches / bell pushes / sockets, fan regulator etc covered with new 3 mm thick laminated bakelite sheet top cover including continuous earth wire cable of size 1.5 Sqmm unsheated stranded copper conductor with green PVC FRLSH insulation connected to common earth dolly complete all as specified and directed for One light/fan/Bell Point controlled by one single pole one way switch. |
| 91 | ditto all as per item No 90 but for One 5/6 Amps socket outlet independent controlled by one single pole 5/6 Amp switch. |
| 92 | ditto all as per item No 90 but for One light/fan/Bell Point controlled by one single pole two way switch 5/6 Amp. |
| 93 | M&L for point wiring with PVC insulated unsheathed single core FRLSH multistranded copper conductor cable IS-694 marked of size 1.5 Sqmm (nominal area) drwawn in and through Existing non metallic rigid PVC conduit with all accessories if require such as bends,reducers, spacers, saddles, junction boxes bakelite sheets, wooden rectangular boards / round blocks(for housing lamp holders and light fittings etc) and existing mild steel pressed / cast iron sunken boxes of suitable size for mounting switches / bell pushes / sockets, fan regulator etc covered with new 3 mm thick laminated bakelite sheet top cover including continuous earth wire cable of size 1.5 Sqmm unsheated stranded copper conductor with green PVC FRLSH insulation connected to common earth dolly complete all as specified and directed for One light/fan/Bell Point controlled by one single pole one way switch. Note:- Cutting chases for conduits and making good to walls, floors etc, in case of recessed and concealed conduit wiring are included in item of taking down point wiring carefully. Switches, ceiling roses, pendants, regulators, sockets, bell push and bells junction boxes and modular fittings switches, ceiling roses, pendants, regulators, bell push and bells, sockets,junction boxes, cover plates with frame , GI metal flush boxes shall be measured and paid for separately. |
| 94 | M&L for point wiring with PVC insulated unsheathed single core FRLSH multistranded copper conductor cable IS-694 marked of size 1.5 Sqmm (nominal area) drawn in and through and including non metallic rigid PVC conduit with all accessories if require such as bends,reducers, spacers, saddles, junction boxes bakelite sheets, wooden rectangular boards / round blocks(for housing lamp holders and light fittings etc) and new GI sunken boxes of suitable size for mounting Modular fittings i.e. cover plates with frame, GI metal flush boxes, switches / bell pushes / sockets, fan regulator etc including continuous earth wire cable of size 1.5 Sqmm unsheated stranded copper conductor with green PVC FRLSH insulation connected to common earth dolly complete all as specified and directed for the One light/fan/Bell Point controlled by one single pole one way switch.Note:- Cutting chases for conduits and making good to walls, floors etc, in case of recessed and concealed conduit wiring are included in item of taking down point wiring carefully. Switches, ceiling roses, pendants, regulators, sockets, bell push and bells junction boxes and modular fittings switches, ceiling roses, pendants, regulators, bell push and bells, sockets,junction boxes, cover plates with frame , GI metal flush boxes shall be measured and paid for separately. |
| 95 | ditto all as per item No 94 but for One 3 pin socket outlet 5/6 Amp on the same board controlled by one single pole one way switch |
| 96 | ditto all as per item No 94 but for One 5/6 Amps socket outlet independent controlled by one single pole 5/6 Amp switch. |
| 97 | M&L for point wiring with PVC insulated unsheathed single core FRLSH multistranded copper conductor cable IS-694 marked of size 2.5 Sqmm (nominal area) drawn in through and including non metallic rigid PVC conduit with all accessories if require such as bends,reducers, spacers, saddles, junction boxes bakelite sheets, wooden rectangular boards / round blocks(for housing lamp holders and light fittings etc) and new GI sunken boxes of suitable size for mounting Modular fittings i.e. cover plates with frame, GI metal flush boxes, switches / bell pushes / sockets, fan regulator etc including continuous earth wire cable of size 2.5 Sqmm unsheated stranded copper conductor with green PVC FRLSH insulation connected to common earth dolly complete all as specified and directed for one 3/5 pin 15/16 Amps switch socket out let on the independent board controlled by one single pole one way switch. Note:- Cutting chases for conduits and sunken boxes and making good to walls, floors etc, in case of recessed and concealed conduit wiring are included in item of taking down point wiring carefully. |
| 98 | M&L for point wiring with PVC insulated unsheathed single core FRLSH multistranded copper conductor cable IS-694 marked of size 1.5 Sqmm (nominal area) drawn in and through Existing non metallic rigid PVC conduit with all accessories if require such as bends,reducers, spacers, saddles, junction boxes bakelite sheets, wooden rectangular boards / round blocks(for housing lamp holders and light fittings etc) and Existing GI sunken boxes of suitable size for mounting Modular fittings i.e. cover plates with frame, GI metal flush boxes, switches / bell pushes / sockets, fan regulator etc including continuous earth wire cable of size 1.5 Sqmm unsheated stranded copper conductor with green PVC FRLSH insulation connected to common earth dolly complete all as specified and directed for One light/fan/Bell Point controlled by one single pole one way switch. Note:- Cutting chases for conduits and making good to walls, floors etc, in case of recessed and concealed conduit wiring are included in item of taking down point wiring carefully. Switches, ceiling roses, pendants, regulators, sockets, bell push and bells junction boxes and modular fittings switches, ceiling roses, pendants, regulators, bell push and bells, sockets,junction boxes, cover plates with frame , GI metal flush boxes shall be measured and paid for separately. |
| 99 | ditto all as per item No 98 but for One 5/6 Amps socket outlet independent controlled by one single pole 5/6 Amp switch. |
| 100 | ditto all as per item No 98 but for One light/fan/Bell Point controlled by one single pole two way switch 5/6 Amp. |
| 101 | M&L for point wiring with PVC insulated unsheathed single core FRLSH multistranded copper conductor cable IS-694 marked of size 2.5 Sqmm (nominal area) drawn in and through Existing non metallic rigid PVC conduit with all accessories if require such as bends,reducers, spacers, saddles, junction boxes bakelite sheets, wooden rectangular boards / round blocks(for housing lamp holders and light fittings etc) and Existing GI sunken boxes of suitable size for mounting Modular fittings i.e. cover plates with frame, GI metal flush boxes, switches / bell pushes / sockets, fan regulator etc including continuous earth wire cable of size 2.5 Sqmm unsheated stranded copper conductor with green PVC FRLSH insulation connected to common earth dolly complete all as specified and directed for one 3/5 pin 15/16 Amps switch socket out let on the independent board controlled by one single pole one way switch.Note:- Cutting chases for conduits and sunken boxes and making good to walls, floors etc, in case of recessed and concealed conduit wiring are included in item of taking down point wiring carefully. |
| 102 | S&Fin repairs new MS pressed steel/cast iron sunken boxes rectangular block in replacement of old rusted sunken box. The MS pressed steel/CI Box shall be galvanised or painted black with two coats of black bituminous paint or any other paint as indicated complete all as specified and directed. The MS pressed steel/cast iron sunken boxes should be suitable for mounting of normal /modular switches, sockets, fan regulator etc and the item rate quoted also including making good the disturbed surfaces to match with the existing surface. The new MS pressed steel / cast iron sunken boxes should be following sizes with suitable thickness as per IS code of size 8\\" x 10\\" and suitable for main switch board. |
| 103 | ditto all as per item No 102 above but of size 7\\" x 4\\" and suitable for 15 Amp Independent board. |
| 104 | ditto all as per item No 102 above but of size 4\\" x 4\\" and suitable for 05 Amp Independent board. |
| 105 | S&F in repairs 3mm thick bakelite sheet hylam of white top fixed with cup washers, machine screws on new / existing MS shuken box including removing existing switch / switch socket / bell push etc and refixing the only servicable switches/socket by making slots on new sheet complete all as specified and directed of size 9\\" x 11\\" and suitable for main switch board. |
| 106 | ditto all as per item No 105 but of size 8\\" x 5\\" and suitable for 15 Amp Independent board. |
| 107 | ditto all as per item No 105 but of size 5\\" x 5\\" and suitable for 05 Amp Independent board. |
| 108 | S&F in repair and replacement Modular Switch, one way, 6A, 1 module complete all as specified and directed. |
| 109 | S&F in repair and replacement Modular Switch, one way, 16A, 1 module complete all as specified and directed. |
| 110 | S&F in repair and replacement Modular Socket, 6A - 2/3 pin combined 2 module complete all as specified and directed. |
| 111 | S&F in repair and replacement Modular Socket, 6A/16A - 2/3 pin combined 2 module complete all as specified and directed. |
| 112 | S&F in repair and replacement Modular white cover plate with frame, 1 module complete all as specified and directed. |
| 113 | S&F in repair and replacement Modular white cover plate with frame, 2 module complete all as specified and directed. |
| 114 | S&F in repair and replacement Modular white cover plate with frame, 3 module complete all as specified and directed. |
| 115 | S&F in repair and replacement Modular white cover plate with frame, 4 module complete all as specified and directed. |
| 116 | S&F in repair and replacement Modular white cover plate with frame, 6 module complete all as specified and directed. |
| 117 | S&F in repair and replacement Modular white cover plate with frame, 8 module complete all as specified and directed. |
| 118 | S&F in repair and replacement Modular Metal Flush Box, 1 module complete all as specified and directed. |
| 119 | S&F in repair and replacement Modular Metal Flush Box, 2 module complete all as specified and directed. |
| 120 | S&F in repair and replacement Modular Metal Flush Box, 3 module complete all as specified and directed. |
| 121 | S&F in repair and replacement Modular Metal Flush Box, 4 module complete all as specified and directed. |
| 122 | S&F in repair and replacement Modular Metal Flush Box, 6 module complete all as specified and directed. |
| 123 | S&F in repair and replacement Modular Metal Flush Box, 8 module complete all as specified and directed. |
| 124 | S&F Modular Bell Push 6A, I module complete all as specified and directed. |
| 125 | S&F in repair and replacement Modular step type regulator,120 W - 2 module complete all as specified and directed. |
| 126 | S&F in repair and replacement Modular Dummy switch- 01 module complete all as specified and directed. |
| 127 | Fix only old serviceable 5/6 Amp Switch piano flush type single pole one way ISI Marked, retrieved after taking down fittings complete all as specified and directed. |
| 128 | Fix only old serviceable 15/16 Amp Switch piano flush type single pole one way ISI Marked, retrieved after taking down fittings complete all as specified and directed. |
| 129 | Fix only old serviceable 5/6 Amp Socket outlet 2 in1, 3 pin flush type ISI marked, retrieved after taking down fittings complete all as specified and directed. |
| 130 | Fix only old serviceable 15/16 Amp Socket outlet 2 in 1, 3 pin flush type ISI marked, retrieved after taking down fittings complete all as specified and directed. |
| 131 | S&F in repair/replacement 5/6 Amp Switch piano flush type single pole one way ISI Marked complete all as specified and directed. |
| 132 | S&F in repair/replacement 15/16 Amp Switch piano flush type single pole one way ISI Marked complete all as specified and directed. |
| 133 | S&F in repair/replacement 5/6 Amp Socket outlet 2 in1, 3 pin flush type ISI marked complete all as specified and directed. |
| 134 | S&F in repair/replacement 15/16 Amp Socket outlet 2 in 1, 3 pin flush type ISI marked complete all as specified and directed. |
| 135 | S&F in repair/replacement 5/6 Amp Switch piano flush type single pole Two way ISI Marked complete all as specified and directed. |
| 136 | S&F in repair/replacement stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc. as required complete all as specified and directed. |
| 137 | S&F in repair/replacement 5/6 Amp bell push flush type ISI marked complete all as specified and directed. |
| 138 | S&F Ceiling Roses Ceiling rose, 3 phase/PVC/polycarbonate, isolated body omplete all as specified and directed. |
| 139 | S&F Lamp holder PVC/Polycarbonate,isolated with back plate suitable for batten fittings ISI marked complete all as specified and directed. |
| 140 | S&F bell, Ding Dong AC. 230 Volts, single pole complete all as specified and directed. |
| 141 | S&F in replacement LED lights fitting 1x 20W, 230V, 110 lm/W AC with driver, holder including LED tube light are equipped with specially designed Extruded aluminium heat sink, Milky white PC diffuser and Elegantly designed white colored ABS endcaps to enhance the aesthethetics of the luminaire. with all accessories internally pre wired and necessary mounting arrangements complete all as specified and as directed. Make :- Havells Cat part No STOUTMINI1200BS20WLED865SPCWH or of its equavalent Makes specified in Appendix \\"B\\" of Particular Specifications. |
| 142 | S&F in replacement LED 9/10 watt 2 feet white 85 lm/W, 6500K batten extruded with decorative end caps complete all as specified and directed. Make- Goldmedal Cat pat No GL9C2001608CD or of equavalent Makes specified in Appendix \\"B\\" of Particular Specifications. |
| 143 | S&F in replacement Recess mounted 600x600 square LED panel 36 watts, 6500K, 100 lm/W Ultra morden designed Modular High Efficancy LED luminaire with specialized High transmittance prismatic optics for glare free symmetric light distribution offering excellent visual comfort . luminaires suitable for Armstrong/Grid ceiling and most wide range of applications complete all as specified and as directed. Make- Havells Cat part No - VENUSNEOHE2x2PLR18-42WLED840MOD or Goldmedal cat part no GL91824CD or of equavalent Makes specified in Appendix \\"B\\" of Particular Specifications. |
| 144 | S&F LED Mirror light 7/9/18 Watt 2 ft adjustable type enegy saving curve type t as specified in Appendix \\"B\\" of Particular Specfications, complete all as specified and directed. |
| 145 | S&F LED bulb 9/10 Watt B-22, 65000K, pin type complete all as specified and directed. |
| 146 | S&F LED tube light fitting 20 Watt 4 feet long decorative ultra slim linear LED lighting three colour CCT Change LED Batten Which can change the Colour of batten FROM WHARM WHITE TO natural white to cool whitewhite the help of a simple toggle switch, fixture with extruded polycarbonate,environmental friendly, energy efficient 230V, complete with all accessories internally pre wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed. |
| 147 | S&F in repairs decortive 1x10 W LED Bollard fitted gate / garden light fitting 240 V, 50 Hz rated input PCC (1:2:4) type B-1 including taking down, complete all as specified and directed. |
| 148 | S&F LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impactand corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete. complete all as specified and directed. |
| 149 | S&F in repairs sheet metal enclouser double door factory made powder coated out of CRCA mild steel sheet 1.2 mm thick wih metallic painting white series pre-wired VTPN DBs (Verticle type)fitted with ABS frame, 415 Volts 200Amps rated bus bar,Neutral link,Earth bar and Din rail, 4 ways dust and vermin proof suitable for incorporation of MCBs duly concealed in wall and making good to distrubed surface and colour matching complete all as specified. |
| 150 | S&F in repairs sheet metal enclouser double door factory made powder coated out of CRCA mild steel sheet 1.2 mm thick wih metallic painting white series pre-wired TPN DBs, 415 Volts 200Amps rated bus bar,Neutral link,Earth bar and Din rail, 4 ways dust and vermin proof suitable for incorporation of MCBs duly concealed in wall and making good to distrubed surface and colour matching complete all as specified. |
| 151 | S&F in repairs sheet metal enclouser double door factory made powder coated out of CRCA mild steel sheet 1.2 mm thick wih metallic painting white series pre-wired SPN DBs, 240 Volts 200 Amps rated bus bar,Neutral link,Earth bar and Din rail, 8 ways dust and vermin proof suitable for incorporation of MCBs duly concealed in wall and making good to distrubed surface and colour matching complete all as specified. |
| 152 | S&F sheet metal enclouser double door factory made powder coated out of CRCA mild steel sheet 1.2 mm thick wih metallic painting white series pre-wired SPN DBs, 240 Volts 200 Amps rated bus bar,Neutral link,Earth bar and Din rail, 4 ways dust and vermin proof suitable for incorporation of MCBs duly concealed in wall and making good to distrubed surface and colour matching complete all as specified. |
| 153 | S&F Moulded Case Circuit Breaker (MCCB) Four Poles (FP) current carrying capacity 100Amp, 415 Volts, breaking capacity 16 KA with adjustable thermal and magnetic settings, complete all as specified and directed. |
| 154 | S&F Miniature Circuit Breaker (MCB) Single Pole (SP) current carrying capacity 6 to 32 Amp, 240V, breaking capacity 10 KA, type 'B' curve in the MCB DB Complete with connection testing and commissioning complete all as specified and directed. |
| 155 | S&F Miniature Circuit Breaker (MCB) Single Pole (SP) current carrying capacity 40Amp, 240V, breaking capacity 10 KA, type 'B' curve in the MCB DB Complete with connection testing and commissioning complete all as specified and directed. |
| 156 | S&F Miniature Circuit Breaker (MCB) Single Pole and Neutral (SPN) current carrying capacity 40 Amp, 240V, breaking capacity 10 KA, type 'C' curve in the MCB DB Complete with connection testing and commissioning complete all as specified and directed. |
| 157 | S&F Miniature Circuit Breaker (MCB) Tripple Pole and Neutral (TPN) current carrying capacity 63Amp, 415V, breaking capacity 10 KA, type 'C' curve in the MCB DB Complete with connection testing and commissioning complete all as specified and directed. |
| 158 | S&F in replacement PVC insulated unsheathed single core FRLSH multistranded copper conductor cable IS-694 marked of size 1.5 Sqmm (nominal area), 1100 Volts grade complete all as specified and directed. |
| 159 | S&F in replacement PVC insulated unsheathed single core FRLSH multistranded copper conductor cable IS-694 marked of size 2.5 Sqmm (nominal area), 1100 Volts grade complete all as specified and directed. |
| 160 | S&F in replacement 1100 volts grade heavy duty 10 Sqmm size cable PVC insulated aluminium stranded conductor, one twin core cable flat or circular, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm dia GI suspension wire, complete all as specified and directed. |
| 161 | S&F in replacement 1100 volts grade heavy duty 16 Sqmm size cable PVC insulated aluminium stranded conductor, two single core cable flat or circular, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm dia GI suspension wire, complete all as specified and directed. |
| 162 | S&F in replacement 25mm external diameter Rigid non-metallic PVC conduit exclusive of boxes (junction/ terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc. complete all as specified and directed. |
| 163 | S&F in replacement 20mm size PVC heavy duty casing and caping with accessories and nickle cadmium screws complete all as specified and directed. |
| 164 | S&F in repairs 100mmx100mmx50mm size PVC Sunken box rectangular block for mounting conventional and modular fittings i.e. switches, sockets, fan regulators etc complete all as specified and directed. |
| 165 | S&F in repairs 175mmx110mmx50mm size PVC Sunken box rectangular block for mounting conventional and modular fittings i.e. switches, sockets, fan regulators etc complete all as specified and directed. |
| 166 | S&F in repairs LED Driver for LED Building Security light/ ceiling light upto 45 W including all connections with siutable size PVC copper conductor wire complete all as specified and directed. Cat Part No. S0DQL-65-700-45W of Make - CROMPTON GREAVES or equivalent as specified in Appendix \\"B\\" of Particular Specfications, complete all as specified and directed. |
| 167 | M&L for submain wiring with two single core PVC insulated FRLSH cable with Copper conductor unsheathed cable of size 4.0Sqmm drawn through in and including 25mm dia non metallic rigid PVC conduit with all accessories including one 4.0Sqmm PVC insulated FRLSH cable with Copper conductor unsheathed cable single core for continuous earthing complete all as specified and directed. ( Note : Two run of single core PVC insulated cable with Copper conductor unsheathed cable of size 4.0Sqmm and one run of 4.0Sqmm PVC insulated copper conductor single core (2x4.0Sqmm+1x4.0Sqmm earth wire) and one run of PVC conduit shall be measured as single run) |
| 168 | S&F in repairs submain wiring with two single core PVC insulated FRLSH cable with Copper conductor unsheathed cable of size 6.0Sqmm drawn through in and including 25mm dia non metallic rigid PVC conduit with all accessories including one 6.0Sqmm PVC insulated FRLSH cable with Copper conductor unsheathed cable single core for continuous earthing including taking down existing submain wiring and conduits etc complete all as specified and directed. ( Note : Two run of single core PVC insulated cable with Copper conductor unsheathed cable of size 6.0Sqmm and one run of 6.0Sqmm PVC insulated copper conductor single core (2x6.0Sqmm+1x6.0Sqmm earth wire) and one run of PVC conduit shall be measured as single run) |
| 169 | M&L for Earthing complete with Galvanised Iron earth plate electrode 60cmx60cmx6mm thick buried directly in ground vertically at (Earth pit not less than 2.25m deep below ground level) a depth not less than 2.25m below normal ground level with top edge of earth plate at depth not less than 1.5m below normal ground level surrounded from all sides by 15cm thick packed layer of charcoal dust and common salt filling in alternate layers and electrode connection by using 4mm dia galvanised earth wire by means of bolts, nuts, check nuts and washers of galvanized iron and protected by 15mm bore GI pipe light grade connected to main switch board or main control board and 20mm bore GI pipe light grade for watering and including funnel, wire mesh, 80mm thick pre-cast RCC (1:2:4) type B-1 cover reinforced with hard drawn steel wire fabric weighing not less than 4Kg/Sqm in lieu of CI cover, PCC (1:2:4) type B-1 pit/chamber including all necessary excavation: and earth work, form work, disposal of surplus soil to a distance not exceeding 50m all as specified and al shown in Electrical Plate No.3 of MES Standard Schedule of Rates 2009 Part-I complete all as specified and directed.Note:- (i) The unit rate shall deemed to include for Test point, PCC pit, 4mm dia GI earth wire from top of the earth plate up to 7.5m above ground level. In case 15mm bore GIprotection pipe required is less than 7.5m, no price adjustment shall be made. (ii) PCC pit shall be provided at least 500mm away from the earth pit and not just on the earth pit and extra cost of additional length of water pipes and fittings, junctions, elbow etc shall be deemed to be included in the unit rate.(iii) On testing after completion if the desired earth resistance is not obtained the earthing will be redone at no extra cost. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 17, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 06, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 7 daysOct 13, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 14 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender