Tender For Provision Of Certain Revenue Works At Ganeshkhind Area Under Ge(I) R&D Pashan, Pune
Tender Value
Ref. Documents
Estimated cost
Bid Submission
08 Oct 2026
18 days left
EMD
57000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pune → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provision Of Certain Revenue Works At Ganeshkhind Area Under Ge(I) R&D Pashan, Pune
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth upto 50 m and lift upto 1.5 m,All kinds of soil as directed by Engineer-in- Charge |
| 2 | Construction of granular sub-base by providing close graded Material With material conforming to Grade-II (size range 53 mm to 0.075 mm ) having CBR Value-25 conforming to specifications, mixing in a mechanical mix plant at OMC, carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per specifications and directions of Engineer-in-Charge complete all as specified and directed. |
| 3 | Material and labour for PCC 1:4:8 (1 cement : 4 manufactured sand derived from Recycled Concrete Aggregate (RCA) : 8 graded stone aggregate 40 mm nominal size Recycled Aggregate (RA) complete all as specified and directed. |
| 4 | Providing and laying cement concrete pavement with 1:2:4 (1 Cement: 2 coarse sand : 4 graded stone aggragate 20mm nominal size), including making chequers of approved pattern on cement concrete floors complete all as specified and directed |
| 5 | Providing and filling in position rubberized bitumen hot sealing compound using grade 'A' conforming to IS: 1834 for sealing of expansion joints in roads / pavements all complete as per direction of the Engineer-in-Charge. |
| 6 | Providing and laying factory made Precast concrete solid blocks of 200 mm thickness of grade M10 made of C&D waste from approved manufacturer in foundation and plinth in Cement mortar 1:6 (1 cement : 6 coarse sand) complete all as specified and directed. |
| 7 | Material and labour for 15mm cement plaster on rough side of single or half brick wall of mix 1:6 (1 cement: 6 fine sand) complete all as specified and directed. |
| 8 | Material and labour for kota stone slabs 20 mm thick in risers/treads of steps, skirting, dado, landing and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete all as specified and directed |
| 9 | Material and labour for Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, Granite stone slab of colour black, Cherry/Ruby red (area of slab over 0.50 sqm) machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels complete all as specified and directed. |
| 10 | Providing and laying stone aggregate of specified size in uniform thickness of stone aggregate (Single size) : 63 mm to 45mm nominal size of course aggregate, watering and compacting to the required dencity complete all as specified and directed. |
| 11 | Material and labour for Cement concrete 1:2:4 in floor, pavements, laid to required slope and camber in panels as required including consolidation finishing and tamping complete all as specified and directed. |
| 12 | Material and labour for heavy duty floor tiles of size 300mm x 300mm, 10 to 13mm thick of make Deccan Natural or Cresto Brown of Somany or equivalent in HR Johnson or Kajaria, set, jointed and pointed in neat cement slurry with grey cement and pigment or Ezy Grout of Somany to match complete laid over and including 20mm thick bed of cement mortar 1:4 complete all as specified and directed by Engr-in-Charge. |
| 13 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge. |
| 14 | Demolishing brick work in cement mortar manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. |
| 15 | Providing and laying Brick work with non modular fly ash bricks conforming to IS:12894, class designation 10 average compressive strength in super structure above plinth level up to floor V level in Cement mortar 1:6 (1 cement : 6 Coarse sand) complete all as specified and directed. |
| 16 | Material and labour for 12mm thick rendering in cm (1:6) on fair faces of brick work or concrete surfaces of wall complete all as specified and directed. |
| 17 | Dismantling floor, hearth or wall tilling 10mm to 25mm thick including cement mortar bedding (but not backing), disposal of unserviceable material within 500 metres lead complete all as specified and directed. |
| 18 | Providing and laying Endura Swimming pool tiles up to 250 x125mm sizes of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1) cement: 4 coarse sand) on floor/wall including mixing of adhesive, grouting the joints with white cement and matching pigments complete all as specified and directed. |
| 19 | Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing 1:2:4 (1 Cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) complete all as specified and directed |
| 20 | Providingand applying wall painting with two coats of premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour on the old / new surfaces of any height complete all as specified and directed. |
| 21 | Providing and fixing 20mm bore Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of jointsas external work upto fourth floor complete as per direction of Engineer in Charge. |
| 22 | Providing and laying 60mm thick faciory made cement concrete interlocking paver block of M -35 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge. |
| 23 | Providing and fixing gun metal gate valve 20 mm nominal bore with C.I. wheel of approved quality (screwed end) complete all as specified and directed |
| 24 | Providing and laying spreading and compaction stone aggregate of stone aggregate (single size) : 63 to 45mm nominal size in uniform thickness hand picking, rolling with 3wheeled road/vibratory roller 8-10 tonne capacity in stages to proper grade and camper etc applying brooming requsite type of screening/binding material to fill upintersticks of course aggregate, watering and compacting to the required dencity complete all as specified and directed. |
| 25 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge). Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 17, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 08, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysOct 16, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 26 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender