Tender For special Repair To Sub Station And Sewage Pump House Including Fencing And Connected Items At Dwarka Enclave And Somnath Line At Inf Line Jamnagar Under Ge Army Jamnagar.
Tender Value
49.20 Lakhs
Estimated cost
Bid Submission
10 Oct 2026
22 days left
EMD
98500
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jamnagar → Gujarat
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special Repair To Sub Station And Sewage Pump House Including Fencing And Connected Items At Dwarka Enclave And Somnath Line At Inf Line Jamnagar Under Ge Army Jamnagar.
BOQ
| Sl. No. | Item Description |
| 1 | Taking down cement plaster on brick or concrete surfaces including racking out joints hacking for keys scrubbing down with water etc complete all as specified and directed. |
| 2 | Dismantaling floor, hearth or wall tiling including cement mortar bedding(but not backing) removing servicable tiles to store and rubbish off premises complete all as specified and directed. |
| 3 | Taking down chowkats with shutter (without taking off shutters from the frames) exc 1.5sqm and n exc 4 sqm each, complete all as specified and directed. |
| 4 | Taking down chowkats with shutter (without taking off shutters from the frames) n exc 1.5 sqm each, complete all as specified and directed. |
| 5 | Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar complete all as specified and directed. |
| 6 | Demolition Cement Concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level complete all as specified and directed. |
| 7 | M&L for rendering 10mm thick on fair faces on brick masonary or concrete surfaces in cm 1:6 finished fair and even complete all as specified and as directed. |
| 8 | M&L for Prepration of newly plastered on walls by hand held sander / long handle sander including cornices, pilasters etc and applying three coat of white wash over a coat alkali resistant primer on walls complete all as specified and as directed. |
| 9 | M&L 15 mm thick rendering on other than fair faces of external wall of brick masonary or concret surfaces in CM 1:4 finished fair and even without using extra cement complete all as specified and as directed. |
| 10 | M&L Prepration of newly plastered surface of wall by hand held sander / long handle sander including cornices, pilasters etc and appliying with Airless spray two or more coats of 100 % premium acrylic emulsion paint having VOC less than 50gm/litre and UV resistance as per IS 15489-2004, Alkali & fungal resistance dirt resistance exterior paint of required shade (company Depot Tinted) with silicon additives @1.43 litre/10Sqm over and including priming coat of exterior primer applied @ 0.9 ltr/10sqm complete all as specified and as directed. |
| 11 | M&L for complete removal of existing treatment by hand held sander / long handle sander including cornices, pilasters etc by jet washer and applying three coat of white wash on walls over a coat of alkali resistant primer on old plastered surfaces complete all as specified and as directed. |
| 12 | M&L 5 mm thick rendering on ceiling or concrete surfaces in cm 1:3 finished even and fair complete all as specified and as directed. |
| 13 | M&L for Prepration by hand held sander / long handle sander including cornices, pilasters etc of newly plastered on ceiling complete all as specified directed and applying three coat of white wash, complete all as specified and as directed. |
| 14 | M&L complete removal of existing tretment by hand held sander / long handle sander washing down with Jet washer and appliying Airless spray two or more coats of 100 % premium acrylic emulsion paint having VOC less than 50gm/litre and UV resistance as per IS 15489-2004, Alkali & fungal resistance dirt resistance exterior paint of required shade (company Depot Tinted) with silicon additives @1.43 litre/10Sqm over and including priming coat of exterior primer applied @ 0.9 ltr/10sqm complete all as specified and as directed. |
| 15 | Preparation of old plastered surfaces of ceiling by hand held sander / long handle sander including cornices, pilasters etc and applying one coat of white wash complete all as specified and as directed. |
| 16 | Complete removal of existing roof treatment, removing rubbish off the premises, cleanning the surface and preparing to receive new roof treatment and applying roof treatment as under:- (a) Applying coat of bituminios primer @ 0.40 litre/ Sqm on prepared surfaces and allow to dry(the primer and the membrane to be used shal be of same manufacturer, (b) Supply and laying of minimum 3 mm thick APP modified polymeric membrane weighting not less than 3 KG/ Sqm black finish reinforcement with non woven polyster matt with help of torching with proplane or abutance gas using torch with minimum 75 mm side overlap and 100 mm end overlap. (c) two coat of approved aluminium paint over membrane complete. (d) all overlaps and joints shall be sealed as per manufacturers instruction complete all as specified and directed. |
| 17 | Roughening surfaces of old concrete surfaces by picking, sweeping clean and washing down with water to remove dust, etc incl brushing neat cement slurry with 3.0 kg of cement per sq metre complete all as specified and as directed. |
| 18 | M&L for Cutting out cracks to V-section in existing roofs or terracing, cleaning out, wetting, grouting with cement and sand slurry 1:3 complete all as specified and as directed. |
| 19 | M&L for Rendering 10mm thick in CM(1:3) with using water proofing compound on fair faces of brick work/ Fasia and roof surface finished even and smooth without using extra cement complete all as specified and directed. |
| 20 | M&L PCC 1:2:4, type B0 (using 12.5mm size stone aggregate) as in levelling course complete all as specified and as directed. |
| 21 | S & F PVC door with chowkhats frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, supply & fixing in opening as per specification & drawing complete all as specified and as directed. |
| 22 | S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel heaving a PVC sheet strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing complete, all as specified & directed. make - rajshree or equivalent make as mention in Appendix B to PS. |
| 23 | S&F powder coated anodised aluminium alloy sections 3 tier track sliding windows series B of size 92mm x 31.75mm x 1.2mm and shutter section 18mm x 43mm x 1.30mm weight 0.547 kg/m Jindal or equivalent duly fitted with neoprene beading, glazing clips, tinted glass panes 4.80/5.0 mm nominal thickness, stainless steel wire cloth 0.36 mm dia and average width of aperture 1.4 mm, aluminium alloy handles etc including taking down old window in any size and make. complete all as specified and directed.Note : rate shall include all glazing/aluminium wire cloth, rubber packing, joining, cleats, glazing clips, aluminium snap beading, locking arrangements, handle etc |
| 24 | S&F powder coated anodised aluminium fixed louvered ventilator frame of size 63.5 x 38.1 x 1.01 mm thick or equivalent section fixed in vertical position with aluminium vertical members and half portion to be provided with 4 mm thick pinhead glass and remaining portion to be louvered using 4 mm thick pinhead glass and louvered portion covered with stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm incl necessary channel frame work, including rubber gasket and aluminium beading including taking down old ventilator in any size and make complete all as specified.Note : rates shall include all glazing/aluminium wire cloth, rubber packing, joining, cleats, glazing clips, aluminium snap beading etc |
| 25 | S & F Framed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed. |
| 26 | S&F Mild Steel Butt hinges, heavy weight, cold rolled, of size 100 mm complete all as specified and directed. |
| 27 | S&F aluminium anodised, barrel tower bolt of extruded section 150mm long, complete all as specified. |
| 28 | S&F 100 mm long aluminium handle, cast type, anodised complete all as specified and as directed. |
| 29 | S&F aluminium anodised, barrel tower bolt of extruded section 100mm long, complete all as specified. |
| 30 | S&F aluminium alloy anodised sliding door bolt with hasp staple(bolt type) ,250 mm long,and fixing clip of sheet cast or extruded section or fixing bolt cast aluminium alloy and fixed. |
| 31 | S&F 150 mm long aluminium handle, cast type, anodised complete all as specified and as directed. |
| 32 | M&L for screed bed or bedding 15mm thick in CM 1:4 on floor to receive tile complete all as specified and as directed. |
| 33 | S & F Non Skid Ceramic Colour Tiles 7 to 8 mm thick area of each tiles exc 0.06 Sqm but n. exc 0.11 Sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed. |
| 34 | M&L 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including 20mm screed bed in CM 1:4 complete all as specified and as directed. |
| 35 | M&L for 18-20mm thick Kota stone slab machine cut, in stair treds, bathroom platforms, shelf platforms etc. bedded and jointed with grey cement slurry mixed with pigment to match the shade of the slab including grinding, rubbing and polishing complete over and including 15 mm thick screed bed in CM 1:4 and polishing complete all as specified and directed by Engr-in-charge. |
| 36 | M&L for 18-20mm thick Kota stone slab machine cut, in riser of steps, skirting, dado and pillar etc. bedded and jointed with grey cement slurry mixed with pigment to match the shade of the slab including grinding, rubbing and polishing complete over and including 10 mm thick screed bed in CM 1:3 and polishing complete all as specified and directed by Engr-in-charge. |
| 37 | M&L rendering 10 mm thick in CM 1:3 on wall to receive tiles complete all as specified and as directed. |
| 38 | M& L glazed ceramic coloured tile in vertical surfaces 300x450x7 mm thick set and jointed in neat cement slurry and poited in white or coloured cement to match complete all as specified and as directed. |
| 39 | M&L for 75mm thick cement concrete Type C-2 ,1:3:6,( Using 40mm graded aggregate) as in plinth protection , subbase of floor etc complete all as specified and directed by Engr-in-charge. |
| 40 | Taking up or down steel tubing and connections including bore of pipe 25 mm complete all as specified and as directed. |
| 41 | Supplying and laying of 25 mm outer dia CPVC pipes SDR 11 and plain CPVC SDR 11 fittings, concealed joint with CPVC adhesive taflon tape in any requirement complete to walls and ceilings or laid in floors iincluding all connected brass cpvc fittingsand cutting grooves, filled with CM1:6complete all as specified and as directed. |
| 42 | Taking up or down steel tubing and connections bore of pipe 20 mm complete all as specified and as directed. |
| 43 | Supplying and laying of 20 mm outer dia CPVC pipes SDR 11 and plain CPVC SDR 11 fittings, concealed joint with CPVC adhesive taflon tape complete to walls and ceilings or laid in floors including all connected brass cpvc fittings and cutting grooves, filled with CM1:6 complete all as specified and as directed. |
| 44 | Dismantling exc 250 & n exc 500 ltrs water tanks and removing from site complete all as specified and as directed. |
| 45 | S & F 500 liters rotaional moulded polyethylene water storage tank, double layered (cylindrical vertical with closed top cover) as per IS-12701-1996 and PTMT 20mm ball valves/ float valve high pressure with epoxy aluminium rod and high density plastic ball screwed for iron pipe and fixed (minimum weight 20mm - 210 gms) , hoisted and fixed in position including necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc, complete as specified in SSR Part-I complete all as directed by Engr -in-charge. |
| 46 | S&F in repairs 20 mm dia gun metal, globe or gate valve, with iron wheel head, screwed both ends for iron pipe/upvc pipe complete all as specified and as directed. |
| 47 | S&F in repair fancy type Bib taps, cast copper alloy 15mm dia with long handle, screwed down, screwed for iron pipe incl female brass threaded adaptor on CPVC pipes complete all as specified and as directed. |
| 48 | S&F in repair Fancy type Stop valves angle /concealed 15mm bore, cast copper alloy, screwed down, high pre-ssure, with crutch or but-terfly handle, screwed both ends for iron pipe or for unions and fixed incl female brass threaded adaptor on CPVC pipes complete all as specified and as directed. |
| 49 | S&F in repair 15mm fancy type Pillar taps, cast copper alloy, with long heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed. |
| 50 | S&F PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and as directed. |
| 51 | S&F in repairs PVC(SWR) pipe 110 mm dia, conforming to IS-13592-1992 type 'B', single socketed in any length with rubber ring joints, fixed to wall complete all as specified and as directed. |
| 52 | S & F PVC (SWR) junction single (single T) equal or unequal 110mm bore, with access door complete all as specified and directed by Engr-in-charge. |
| 53 | S&F in repair PVC (SWR)110 mm bend bore bends any radius complete all as specified and as directed. |
| 54 | S&F in repairs PVC(SWR) pipe 75 mm dia, conforming to IS-13592-1992 type 'B', single socketed in any length with rubber ring joints, fixed to wall complete all as specified and as directed. |
| 55 | S & F PVC (SWR) junction single (single T) equal or unequal 110mm bore, with access door complete all as specified and directed by Engr-in-charge. |
| 56 | S&F in repair PVC (SWR)110 mm bend bore bends any radius complete all as specified and as directed. |
| 57 | M&L for cement concrete 1:2:4 type B-0 (12.5 mm aggregate) sub base of floors , mass concrete complete all as specified and directed by Engr in charge. |
| 58 | M & L in repair 75mm outlet dia PVC(SWR) floor trap, plain with grating including jointing with solvent cement all as specified and directed. |
| 59 | S&F in repair vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern ) including provision of cement concrete bedding, connection to trap and to flushing pipe, anti syphonage pipe etc complete making good to floor complete all as specified and as directed. |
| 60 | Supply and fixing in repair PVC flushing cistern, white, 10ltr capacity with 32mm dia flush pipe any lenth fixed to water closed complete all as specified and as directed. |
| 61 | S & F in repair Vitreous China wash basin, white, flat back, size 550mm x 400 mm with & including a pair of cast iron brakets embedded in PCC 1:3:6) type C-1 (using 20mm graded stone aggregate), blocks of size 10x7.5x15cm , and 32 mm bore chromium plated brass waste fitting with long screwed shanks and fly nuts,flange end bedded in red lead cement and other end fixed, ( excluding tap ) including PVC Waste coupling of PTMT 32mm dia (half or full threaded) Minimum weight 45gms , washers and Brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed complete as specified and directed by Engr-in-Charge. |
| 62 | S&F in repair Soap dish of any type (S/S) approximate size 160x160 fixed to plugs with chromium plated brass screws complete all as specified and as directed. |
| 63 | S&F in repair Brass chromium plated Tublar towel rail 20mm dia D type 60 cm long between flanges complete all as specified and as directed. |
| 64 | S&F 600 x 450mm bevelled edge mirror of selected quality glass mounted on 6mm thick AC building board or commercial plywood & fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and as directed. |
| 65 | M&L for racking of cracks upto 5 mm wide ,preparation and crack filling with ready to use crack fiber reinforced filler /chemical based crack fillers by approved manufacturer and filling as per manufacturer instructions in walls,roofs of any type or size (Make: Pidilite/dr fixit,fosroc, or equivalent) all as specified and directed. |
| 66 | Removal of all loose/unsound/bad/damaged concrete or plaster existing RCC structure of slab/beams/walls/chajja by using chesel/hammar .Cut and remove unsound reinforcement bars, wires etc without damaging the sound reinforcement . clean loose rust from bars manually with brush . fixing new supplymentary bars if required,either by tying it with existing bars or by welding on it. Applying eppoxy bonding agent and making good with polymer modified plaster/micro concrete as required thickness over a coat of rust removing alkaline primer and match the finishing to the existing surface in ground floor including formwork complete all as specified and directed. |
| 67 | Supply only of Intergral water proofing compound as per manufactures instruction complete all as specified and as directed. |
| 68 | Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting exceeding 20cm girth on brick walls complete all as specified and directed. |
| 69 | S&F in repairs for Steel rolling shutters with thickness of lath 1.0 mm, gear operated type with bevelled gear box and and crank handle, without ball bearing, as specified including top cover, an choring rod, hasp and staple and one shop coat of primer; erected in position as indi cated, complete all as specified and as directed. |
| 70 | S&F in repairs for safety lever locks mild steel with 4 levers for rolling shutters complete all as specified and as directed. |
| 71 | S&F in repairs for ball bearing for rolling shutters complete all as specified and as directed. |
| 72 | Exacavation in trenches not exc 1.5mtr wide and n exc 1.5mtr depth for foundation, manhole etc not exc 10 Sqm on plan including getting out in soft/loose soil complete all as specified and directed. |
| 73 | S & F in stainless steel wire cloth 0.36mm dia of wire and avarage width of aperture 1.40mm and fixed with stainless steel wire staple in any type of windows/doors complete all as specified and directed by Engineer-In-Charge. |
| 74 | M/L two coats of synthetic enameled painting over a coat of pink primer to new wooden surfaces of any description exc 10 cm width or girth complete all as specified and directed. |
| 75 | S&F in repair 125 mm Brass chromium plated shower rose with or without swivel joints, any size, including fixing to steel pipe or union, complete all as specified and directed. |
| 76 | Returning, refiiling including spreading, leveling watering and well ramming in layers not exc 25cm in soft/loose soil complete all as specified and directed. |
| 77 | Removing excavated surplus soil/material not exc 50mtr and depositing where directed at a level not exc 1.5mtr above the starting point complete all as specified and directed. |
| 78 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed. |
| 79 | Excavation in post hole each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, and getting out soft soil complete all as specified and directed. |
| 80 | Dismantling posts or struts (wood , steel or RCC ) any section , including taking out embedded portion and making good disturbed ground embedded in concrete , brick work , masonary etc complete all as specified and directed. |
| 81 | Demolition of brick work or stone/boulder masonary built in CM including all quoins, arches, pillars, etc but excluding ashlar, facing, dressed stone work and pre-cast concrete articles complete all as specified and as directed by Engineer-in-Charge. |
| 82 | M&L 15 mm thick rendering on fair faces of external wall of brick masonary or concret surfaces in cm 1:6, finished fair and even without using extra cement complete all as specified and as directed by Engineer-in-Charge. |
| 83 | M&L for Brickwork with fly ash moudular bricks built in CM (1:4) , straight or curved on plan exc 6m mean radius, complete all as specified and directed. |
| 84 | M&L for cement concrete 1:3:6 type C-2 (using 40mm aggregate) columns , pillar and posts etc. complete all as specified and directed by Engr in charge. |
| 85 | M&L for preparation of old steel surface of any description and applying one coat of synthetic enamel paint complete all as specified |
| 86 | S&F steel work in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS 1161-1998 grade st-240 complete all as specified and as directed by Engineer-in-Charge. |
| 87 | S&F mild steel work in angle iron in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc, and similar works confirming to Grade E-165 (Fe 290) complete all as specified and directed. |
| 88 | S&F mild steel screw bolts (machine made) with hexagonal or spuare heads at one end and screwed the other, or screwed to both ends, each screwed end to be fitted with washers and one hexagonal or square nut , exc 5cm but nexc 10 cm long and dia of neck 5 mm to 10mm complete all as specified and as directed. |
| 89 | M&L for painting, two coats with synthetic enamel paint over a coat of red oxide primer on new steel/iron surfaces of any description over 10cm width or girth including preparation of surfaces and priming with red oxide complete all as specified and directed by Engr-in-charge. |
| 90 | Supply and fixing for mild steel galvanised chain link fencing 4 mm dia of mesh wire and mesh opeing size 50x50mm with straining bolts, 10 mm dia round bars binding with 0.9mm dia MS binding wire, flat iron fillets ( for securing wire mesh etc. ), binding and jointing complete including necessary drilling, bolting or revetting etc. complete all as specified and as directed. Note:- Flat iron, round bars, nut bolts, and waashers etc, shall be measured as supply only and paid seperately. |
| 91 | S&F mild steel plates, plain or chequered, 5 mm thick or over in thickness in available sizes conforming to Fe-410-W(Gde E-250) Quality B complete all as specified & directed. |
| 92 | Supply only mild steel round bars 6mm to 8 mm Fe-410 W(Gde E-250) , cut to shae , bend to shape required , including cranking , bending spirally for hopping ends and binding with and including mild steel wire annealed not less than 0.9mm dia or securing with clips complete all as specified and as directed by Engineer-in-Charge. |
| 93 | Dismantling fencing wire mesh any type complete all as specified and as directed by Engineer-in-Charge. |
| 94 | M&L for Providing precast cement concrete type B1 1:2:4 (using 20mm graded concrete) in window or door cills, lintels, bressumers, steps, quoin blocks (for use with ma sonry), string courses, copings. kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, ancho-rage blocks, bonders (for stone walling). corbels, brackets, etc. (of any section indicated), with plain fair faces, including cham fers, weatherings, throat- ing etc. and setting in mortar complete with joints to match complete all as specified and as directed by Engineer-in-Charge. |
| 95 | S&F in repairs Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. complete all as specified and as directed by Engineer-in-Charge. (each line wire to be measured) |
| 96 | M&L for cement concrete 1:4:8 type D-2 (40mm aggregate) foundation, sub base of floors , filling mass etc.concrete complete all as specified and directed by Engr in charge. |
| 97 | M&L for hardcore (broken stone or boulders) of gauge n exc 63mm, deposited, spread and levelled in layers n exc. 15cm thic, watered and rammed to a true surface complete all as specified and directed. |
| 98 | M&L factory made 60mm thick Machine pressed precast cement concrete coloured, rubber moulded, designer(reflecting type) interlocking pavour block of M-35 grade confirming to IS 15658-2006 of shape and size as directed with coloured top laid over and including 50mm thick sand cushioning, joints of blocks filled with dry sand and compacted complete all as specified and dierected by Engr-in-charge. |
| 99 | Taking down copper /aluminium point wiring (light, fan, bell,socket or power) complete including fixture and fittings such as switches , ceiling roses , pendent , regulators, sockets, light fitting etc. Removing materials to store for keeping in safe custody or for taking credit (credit a for above items should be made as per condition seperately) and making good distrubed surfaces of walls, floors etc complete all as specified and directed by Engr in charge. |
| 100 | Taking down old/unserviceable distribution board by disconnection of electric connection carefully SPN DBs/TPN DBs/ Main Switch including old unserviceable MCCBs/ MCBs, Isolators, etc and making good to disturbed surfacecomplete all as specified and directed by Engr-in-Charge. |
| 101 | Taking down carefully copper/aluminium Sub main wiring of any size from surface/concealed /existing conduit of any height and removing materials at site and making good disturbed surfaces of walls, floors roofs etc complete all as specified and directed by Engr-in-Charge. |
| 102 | M & L for One light point controlled by one, one way switch 5 Amps Point wiring using approved colour coding as per IS, with multistranded copper conductor 1.5 Sq. mm (nominal area), two single core, PVC insulated and unsheathed FRLSH cable 1100 volts grade ISI-694 marked drawn through in and including heavy duty, PVC concealed conduit of white/ ivory colour including all accessories after chasing in wall/ceiling etc, heavy duty ISI marked, with GI sunken boxes 1.2 mm thick, 60 mm deep with earth dolly duly, covered with modular white cover plate with inner frame suitable for modular switches, including PVC insulated multistranded copper conductor 1.5 Sqmm (nominal area) single core FRLSH cable as earth continuity conductor to common earth and connecting to earth dolly including cutting, chasses and making good disturbed surface to match with existing finish with plaster complete all as specified and directed by Engr-in-Charge. |
| 103 | Description all as per item No 102 here in before but using One fan point/ exhaust fan point controlled by one, one way switch 5 Amps and regulator complete all as specified and directed by Engr in charge. |
| 104 | Description all as per item No 102 here in before but using One 3 point 5 Amps switch socket outlet point controlled by one switch on the same board complete all as specified and directed by Engr in charge. |
| 105 | Description all as per item No 102 here in before but using One using 2.5 sq mm single core copper conductor cable of multistranded flame retardant PVC insulated unsheathed 1100 volts grade for 15 amps switch socket cobmination point including necessary running of 1.5 sq mm copper conductor flame retardant PVC wire as earth continuity conductor along with wiring and connecting to the common eath dolly complete all as specified and directed by Engr in charge. (power point) |
| 106 | Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and,cutting chases for concealed water,tubing or concealed conduit wiring,,etc., and making good, cutting not,exc 10 cm girth ®(stone massonary) complete all as specified and directed by Engr in charge. |
| 107 | S & F for modular switch piano flush type, single pole, one way, and 5/6 Amp single module complete all as specified and directed by Engr in charge. |
| 108 | S & F for modular switch piano flush type, single pole, one way, and 15/16 Amp single module complete all as specified and directed by Engr in charge. |
| 109 | S & F for modular socket outlet multipurpose having provision for 3 pin, 5/6 Amp and 2 pin, 5/6 Amp, 2 module piano flush type complete all as specified and directed by Engr in charge. |
| 110 | S & F for modular socket outlet multipurpose having provision for 3 pin, 15/16 Amp and 3 pin, 5/6 Amp, 2 module piano flush type complete all as specified and directed by Engr in charge. |
| 111 | S & F for modular step type fan regulator (BLDC) 120 watt 2 module suitable for 230 volt 50 Hz AC supply complete all as specified and directed by Engr in charge. |
| 112 | S & F white cover plate with frame 2 module complete all as specified and directed by Engr in charge. |
| 113 | S & F white cover plate with frame 4 module complete all as specified and directed by Engr in charge. |
| 114 | S & F white cover plate with frame 6 module complete all as specified and directed by Engr in charge. |
| 115 | S & F white cover plate with frame 8 module complete all as specified and directed by Engr in charge. |
| 116 | S & F modular metal flux box 2 module complete all as specified and directed by Engr in charge. |
| 117 | S & F modular metal flux box 4 module complete all as specified and directed by Engr in charge. |
| 118 | S & F modular metal flux box 6 module complete all as specified and directed by Engr in charge. |
| 119 | S & F for ceiling rose, surface Bakelite with 3 terminals, ISI marked for batten fitting complete all as specified and as directed by Engineer-in-Charge. |
| 120 | M & L for Sub main wiring with approved colour coding as per IS with two single core PVC insulated FRLSH cable with stranded copper conductor of size 6 Sq mm nominal area and drawing into suitable size of PVC non metallic rigid heavy duty PVC conduit of white/ ivory colour and its accessaries ISI marked heavy duty of suitable size including concealed in wall etc one run of PVC insulated with 2.50 Sqmm (nominal area) stranded copper conductor FRLSH cable as earth wire complete all as specified and as directed. Note:- Two runs of 6 sqmm cable,one run of 2.5 sqmm cable and one run of PVC conduit will be measured as one unit complete all as specified and as directed by Engineer-in-Charge. |
| 121 | S & F for sheet metal enclosure MCB DB TPN 4 way with 200 Amps rated bus bar 415 volts double door with magnitic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and as directed. |
| 122 | S & F for sheet metal enclosure MCB DB SPN 8 way with 200 Amps rated bus bar 240 volts double door with magnitic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and as directed by Engineer-in-Charge. |
| 123 | S & F for MCCB four pole 63 Amps, 415 Volts breaking capacity 25 K complete all as specified and as directed by Engineer-in-Charge. |
| 124 | S & F for MCB Single pole and neutral rated capacity 5 to 32 Amps, 240 Volts breaking capacity 10 KA, 'C' curve complete all as specified and as directed by Engineer-in-Charge. |
| 125 | S & F for MCB Single pole rated capacity 5 to 32 Amps, 240 Volts breaking capacity 10 KA, 'B' curve complete all as specified and as directed by Engineer-in-Charge. |
| 126 | S & F for LED tube light fitting 1 x 20 watts, 220V, AC decorative box with driver, holder including LED light connectiong up with three core flexible copper conductor cable of suitable size from ceiling rose to fitting complete all as specified and as directed. |
| 127 | S&F PVC synthetic (Thermoplastic polystyrene) street light junction boxes of suitable size to accommodate and including 3 phage connector block and MCB SP 6 Amps with provn of incomimg/outgoing cable entries with two sets of suitable size of clamps/bolts and nuts and fixed to pole complete all as specified and as directed. |
| 128 | S & F for Energy saving new generation environmental friendly long life versatile presure die cast aluminium IP 66 for security light fitting luminaire with high power LEDs as light source and electronic driver of capacity 90 watts with pre wired and necessary mounting arrangements and provision of 2.5 sq mm three core copper conductor cable multi stranded from ceiling rose to light fitting including necessary dia GI pipe medium grade bracket 1.5 mtr long bend to required shape with clamps, nut, bolts complete all as directed by Engineer- in-charge. |
| 129 | S & F for Energy saving new generation environmental friendly long life versatile presure die cast aluminium IP 66 for security light fitting luminaire with high power LEDs as light source and electronic driver of capacity 35 watts with pre wired and necessary mounting arrangements and provision of 2.5 sq mm three core copper conductor cable multi stranded from ceiling rose to light fitting including necessary dia GI pipe medium grade bracket 1.5 mtr long bend to required shape with clamps, nut, bolts complete all as directed by Engineer- in-charge. |
| 130 | S & F for energy efficient exhaust fan of 230 mm sweep made of metal body Ventil Air -DS type complete with louver with bolts nuts and washers size of the bolt 15 cm long 12 mm dia embedded in the wall including provision of PVC flexible copper cable of size 23/0.0076 two core from ceiling rose to exhaust fan for connection and making suitable size of hole to existing brick wall for fan basecomplete all as specified and directed by Engr-in-Charge. (Note : Cost of suitable opening wall for fixing exhaust fan is deemed to be included in overall rate quoted). |
| 131 | M & L for earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground vertically (earth pit not less than 2.25m deep below ground level) with top edge of the plate not less than 1.50 mtr deep below normal ground level, connecting to GI earth wire 4mm dia by means of bolts, nuts, check nuts, and washers of galvanized iron or steel including 15 mm dia. medium grade protection pipe for earth lead complete with charcoal and common salt including watering arrangement with galvanized iron pipe light grade 20 mm dia, PCC Chamber, CI frame and cover, MS funnel with wire mesh all as shown in electrical plate no 3 of SSR part I including excavation and earthwork in any type of soil/strata and testing on completion. Note :- GI earth wire 4 mm dia and 15 mm dia protection pipe upto 7.5 mtr from earth plate is deemed to be included in rate quoted complete all as specified and directed by Engr-in-Charge. |
| 132 | S&F ceiling fan 230 Volts,1200mm sweep with air delivery 210 CFM, service value of the fan shall be greater than 6.1 (5 star rated) as per BIS with blades, down rod and other necessaries with brushless direct current motor(BLDC) with out remote system and electrical connection from ceiling rose to fan terminal complete all as specified and as directed by Engineer-in-charge. |
| 133 | Supply and drawing copper conductor cable 2.5 sqmm two single core with 2.5 sqmm earth wire for connection from junction box to street light fitting including 2 nos hole in the steel tubular pole complete all as specified and directed.Note- Three run of cable will be measured one unit length. |
| 134 | S & F in replacement of GI brackets for fixing LED street light fitting fabricated out of GI tubing 40 mm dia, medium grade, 1.2 mtr long , bend to 120 degree shape by cutting, welding and well finishing including MS clamp of flat iron of size 32 x 5 mm -02 Nos complete for steel poles / PCC pole as per site requirement with nut, bolt & washers for fixing of GI bracket complete all as specified and directed. |
| 135 | Supply, erecting and fixing in true vertical position, steel tubular swan neck swaged pole (410 SP-31) 9 mtr long, complete with cast iron base plate 30cmx30cmx6mm thick, pole cap / finial taper plug, bolts, nuts and washers, welded reduced section and longitudinal weld throughout entire length of pole including 2 coats of black bituminous paint externally upto planting depth and remaining exterior portion of pole shall be provided with two coats of aluminium paint over one coat of red oxide primer and incl taking down existing old unserviceable poles complete all as specified and directed. (Numbering of the poles shall be done with synthetic enameled painted letter of shape & size as directed.) Note :- Excavation incl earth work and PCC foundation will be measured and paid separately. |
| 136 | M&L for filling dry and clean sand for cable protection underground cable in trenches for cable cushioning 8cm below and 15 cm after laying of cable punned down to 18cm complete all as specified and directed.Note:- Punned thickness of 18 cm only shall be measured for payment. |
| 137 | M&L for sub class 'B' common burnt, brick old size, designation 75, laid dry, flat with width equal to length of bricks as covered/laid over the cable to give mechanical protection to underground cable complete all as specified and directed. |
| 138 | Supply and fix street light timer switch panel consisting of timer, contactor Auto/ manual selector, indication lamps etc in sheet metal enclosures complete all as specified and directed. Make : Havells Cat part No SAP code 1HXSS0312A or equivalent make of Crompton Greaves, Bajaj etc. |
| 139 | Supply ,installation , testing and commisioning LT 415 Volts, 4 wire AC 50 HZ huted cubical type , 3.15 mm thick CRCA Sheet and angle iron frame of size 50cmx50cmx6mm , Factory made outdoor type feeder pillar box weather and vermin proof of size 0.60x0.60x 0.20m and outside with approved paint over a coat of primer complete locking arrangement two earth terminal suitable cable glands for all incoming and outgoing cables removable nuetral link, connecting strip/ solid conductot brought out to cable chamber brass / copper nut, bolts/ eashers etc including grouting of feeder piller box 60 cm above ground level by providing 90 cm long angle iron of size 50x50x6mm welded on all the four comer embeded in PCC 1:2:4 using 20mm graded stone aggregate up to 30 cm complete all as specified and directed by Engineer -in- Charge including the following accessories / components complete all as specified and directed.(a) MCCB 100 Amps 4 Pole 16KA - 02Nos (b) MCCB 63 Amps 4 Pole 16KA - 02Nos(c) 4 Nos Aluminium Bus bar high conductivity -400 Amps duly insulated with adhaine tape.(d) Indicator lamp RYB LED type , set of 03 -01 Nos(e) Time switches, contactors, relays etc complete all as directed. |
| 140 | M & L for Fabrication of rectunagular shaped Glow Sign Board made out of GI sheet of 20 guage (5 sidesi'e back, top, bottom, both sides) to be fixed by screws over the MS frame made out of MS square hollow bar of size 25.40 mm x 25.40 mm x 2.65 mm thickness, to be claded by aluminium beeding at all sides fixing of flex sheet 0.60 mm thick in the front area with margin at all sides after preperation of making computerised colour flex details matter, layout of pump houses, sewage pumps, filter plant etc of varies sizes will be provided by department. Fixed in repair complete all as specified and directed by Engr-in - Charge including provision of the following :- i) MS / Stain less steel hook for hanging the glow sign board on wall incl wooden plug & screws. - 04 Nos in each board. ii) Provision of LED batten light fitting 20 watt incl all accessories & necessary wiring using PVC insulated single core copper conductor cable 1.5 Sqmm - 04 Nos in each board. iii) Suitable arrangement to be made for opening of front side flex board/ frame with locking /fixing arrangements for carrying out necessary repair to inside light fittings. iv) Carrying out two coat of painting on the inside steel frame by two coat of synthetic enemaled paint over a coat of red oxide primer. v) Over all dimension of glow sign board completed all as specified and directed by engr-in-charge . |
| 141 | M & Lfor XLPE insulated screened PVC bedded galvanised steel strip or wire armoured UG heavy duty electric cable with aluminium conductor 1100 Volts grade cross sectional area of 95Sqmm 3.5 core laid in trenches under floor/road/hard standing, along poles etc complete all as specified and as directed by Engineer-in-charge. |
| 142 | M & Lfor XLPE insulated screened PVC bedded galvanised steel strip or wire armoured UG heavy duty electric cable with aluminium conductor 1100 Volts grade cross sectional area of 35 Sqmm 3.5 core laid in trenches under floor/road/hard standing, along poles etc complete all as specified and as directed by Engineer-in-charge. |
| 143 | M & Lfor XLPE insulated screened PVC bedded galvanised steel strip or wire armoured UG heavy duty electric cable with aluminium conductor 1100 Volts grade cross sectional area of 16 Sqmm 4core laid in trenches under floor/road/hard standing, along poles etc complete all as specified and as directed by Engineer-in-charge. |
| 144 | S&F GI pipe light grade 40mm bore for cable protection fixed to poles/along wall/floor/under road/acrossthe drain or nallah including taking down old unservuceable GI pipe complete all as specified and as directed by Engineer-in-charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 17, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 10, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 22 daysOct 12, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 24 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender