Defence Statutory Bodies & Commissions/Committees Closing in 3 days TDR #57571224

Tender For special Repair To Leakage, Seepage Of Bldg Lgo-9, Lgo-10, Lm-39, Lm-40, P-133, P-239, Lm-31 & Lm-41 And Other Related Works Of 101 Area Sig Coy At Shillong Cantt And special Repair To Floor Of Or Md Accn Qtr No P-141/1 To 141/9, P-142/1 To

Issued by Statutory Bodies & Commissions/Committees · East Khasi Hills, Meghalaya
Tender Value
48.32 Lakhs
Estimated cost
Bid Submission
08 Oct 2026
3 days left
EMD
96640
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
East Khasi Hills → Meghalaya
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for special Repair To Leakage, Seepage Of Bldg Lgo-9, Lgo-10, Lm-39, Lm-40, P-133, P-239, Lm-31 & Lm-41 And Other Related Works Of 101 Area Sig Coy At Shillong Cantt And special Repair To Floor Of Or Md Accn Qtr No P-141/1 To 141/9, P-142/1 To 142/6, P-176/3 To 176/6, P-178/1 To 178/3 & P-178/5 To 178/6 At B C Of 101 Provost Unit, Shillong Cantt Under Ge Shillong

BOQ

Name of Work:- SPL REPAIR TO LEAKAGE, SEEPAGE OF BLDG LGO-9, LGO-10, LM-39, LM-40, P-133, P-239, LM-31 & LM-41 AND OTHER RELATED WORKS OF 101 AREA SIG COY AT SHILLONG CANTT AND SPL REPAIR TO FLOOR OF OR MD ACCN QTR NO P-141/1 TO 141/9, P-142/1 TO 142/6, P-176/3 TO 176/6, P-178/1 TO 178/3 & P-178/5 TO 178/6 AT B C OF 101 PROVOST UNIT, SHILLONG CANTT UNDER GE SHILLONG
Sl. No. Item Description
1Dismantling of plain or corrugated steel sheeting any guage thickness including nainital or similar pattern roof covering complete all as specified and directed.
2Dismantling of timber scantling 40 sqcm over in section in any position (unframed work) complete all as specified and directed.
3Dismantling wrought Iron or mild steel work of any description not other wise described complete all as specified and directed.
4Dismantling boarding any description fixed in any position with nails complete all as specified and directed.
5Demolition of plain cement concrete (unreinforced) in ground floors or above ground floor and paving n.exc 15 cm thickness (Below or above ground level) complete all as specified and directed.
6Demolition of PCC block masonry, brick work or stone masonry built in cement mortar including all quoins arches, pillar etc but excluding ashlar facing , dressed stone work and precast concrete articles, complete all as specified and directed.
7M&L for pre-cast PCC solid block walling with cement concrete type C1 (1:3:6, using 20 mm graded crushed stone aggregrates) exc.10cm in width and setting in cement mortar 1:4, complete all as specified and as directed.
8M&L precast cement concrete solid block type C1 (1:3:6, using 16 mm graded crushed stone aggregrates) 10cm thick in CM 1:4, straight or curved on plan to any radius complete all as specified and as directed.
9M&L for Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.
10S&F pre painted galvatume aluminium zinc coating GI based plain steel sheet as in ridge of 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.
11M&L for a) Surface Prep: Ensure the RCC roof is clean, dry, and free from loose material, dust, or oil.b) Crack Repair: Seal cracks with Sikadur-20 Crack Seal or a similar sealant.c) Primer Application: Apply a suitable primer (like Sikalastic-11 Primer W) to enhance adhesion.d) Base Coat: Apply the first Sikalastic-560, generous coat with the help of roller.e) Reinforcement: While the base coat is still wet, embed Sika Reemat/Fleece-120 (fiberglass reinforcement) into the coat to enhance tensile strength.f) Top Coat: After the first coat has dried (typically touch-dry), apply a second of Sikalastic-560, top coat of the liquid membrane in a perpendicular direction to the first coat to ensure 100% coverage.g) The entire item to be executed through certified specialist firm/expert person with warranty of 5 yrs complete all as specified and directed.
12M&L for roof truss (framed) trussed, purlin etc of angle or other section for refixing of sheets and similar works complete of Gde Fe-290 (Gde E-165) complete all as specified and directed.
13M&L 2nd class hard wood in scantling clean sawn timber fixed complete all as specified and directed.
14S&F Gl frame work for snapgrid false ceiling comprising of Gl perimeter channnel 0.55 mm thick with Main T- flange of 25 mm and web of 30 mm fixed to surrounding wall angle with flange and web 25 mm each , Cross T with flange 25 mm and web 25 mm fixed to main T, Main T is suspended from soffit @ 1200 mmm c/c using GI wire of 4mm thickness GI frame will be 60 x 60 cm to recieve E-board ceiling complete all as specified and as directed .
15M&L for 4mm thick non asbestos fiber cement building boards 600x600 mm prepainted fibre boards ceiling designer/decorative type with different designs as approved by the Engr-in-charge fixed or laid in ceiling timber /GI/ aluminium frame work in ceiling flat or sloping complete all as per manufacturer instruction complete all as specified and directed.
16M&L for PCC 1:2:4 Type B0 using 12.5 mm graded aggregate as in levelling course, haunching, coping and similar works of over RCC roof surface including rounded or chamferred on edges etc complete all as specified and as directed.
17M&L rendering 15mm thick, CM 1:6 on fair faces of brick work or concrete surfaces complete all as specified and directed.
18M&L rendering 10mm thick, CM 1:4 on fair faces of brickwork or concrete surfaces complete all as specified and directed.
19M&L prepairing old wall surfaces by washing rubbing down and stopping of distempered or any painted surfaces and priming with alkali resistant primer paint and two coats of cement base paint complete all as specified and directed.
20M&L distempering with 1st quality oil emulsion distemper on walls white or tinted, two or more coats complete all as specified and directed.
21M&L providing and applying plaster of paris putty of 1 mm thickness over plastered surface to prepare the surface even and smooth complete all as specified and directed.
22M&L prepairing new plastered surfaces by priming with alkali resistant primer paint and applying two coats of cement base paint complete all as specified and directed.
23M&L preparation of old painted surface of wood any description scrubbing, rubbing down and stopping over 10cm width or girth and two coat of synthetic enamel paint (ordinary tint) complete all as specified and directed.
24M&L preparation of old painted surfaces of wood surfaces of any description n exc 10cm width or girth when unconnected with other painting or when painted in different tint two coat of synthetic enamel (ordinary tint) incl scrubbing, washing, rubbing down and stopping complete all as specified and directed.
25M&L for preparation of new or previously untreated surfaces of wood and wood based materials of any description not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint over a coat of pink primer complete all as specified and directed.
26M&L Preparation of old steel and iron surfaces of any description, over any width or girth,not otherwise described applying two coats of aluminium paint over one coat of red oxide primer, complete all as specified and directed.
27M&L Preparation of new steel and iron surfaces of any description, over 10cm in width or girth,not otherwise described applying two coats of synthetic enamel paint over one coat of red oxide primer, complete all as specified and directed.
28M&L Preparing surfaces of wood and wood based materials, new or old, of any description and girth, not otherwise described and treated with Two coats of Creosote complete all as specified and directed.
29Taking down shutters of any description exc 1.0 Sqm and nexc 2 sqm, adjusting or cutting required if any and refixing in same opening complete all as specified and directed.
30Dismantling floor, hearth , wall tiling including cement mortor bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.
31M&L Glazed ceramic Coloured Tile 300x450x7mm/300x600x7 mm thick in Skirting, Dados, etc., Set and Jointed in Neat Cement Slurry and Pointed in White or Colour Cement to match laid over a backing coat of 10mm thick CM 1:4 screed, complete all as specified and as directed.
32M&L for 25 mm thick Cement concrete type B-1, 1:2:4 (20mm graded aggregate) used over sub base to recd floor tiles complete all as specified and directed
33M&L for Non Skid Ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with the tile colour including Screed bed or bedding layer of mortar 15 mm thick for laying floor finishes in CM (1:6). complete all as specified and directed.
34M&L for non skid ceremic coulred tiles 7 to 8mm thick area of each tile exc 0.18 sqm but n exc 0.38 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to mortar.Laid over and including15 mm thick cement screed bed in CM 1:6 complete all as specified and directed.
35All as per Item No 34 above here–in–before but on vertical surfaces such as skirtings and risers to steps etc. over 10mm thick rendering in CM 1:4 as in backing coat complete all as specified and directed.
36Complete removal of existing treatment and applying wall care putty where required to fill up holes to achieve smooth surfaces of wall / ceiling and applying two coats of Oil Bound Distemper with roller of approved shade/tint complete all as specified and as directed.
37M&L preparation of old painted surfaces of steel of any description over 10 cm in width or girth and applying two coat of synthetic enamel paint complete all as specified and as directed. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 57571224
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 48.32 Lakhs
LAST DATE 08-10-2026
Authority
Authority Name Military Engineer Services
Work Description Tender for special Repair To Leakage, Seepage Of Bldg Lgo-9, Lgo-10, Lm-39, Lm-40, P-133, P-239, Lm-31 & Lm-41 And Other Related Works Of 101 Area Sig Coy At Shillong Cantt And special Repair To Floor Of Or Md Accn Qtr No P-141/1 To 141/9, P-142/1 To 142/6, P-176/3 To 176/6, P-178/1 To 178/3 & P-178/5 To 178/6 At B C Of 101 Provost Unit, Shillong Cantt Under Ge Shillong
Basic Detail
Tender No GE/SHL/TOKEN-68 OF 2026-27
Bidding Type Tender
Location
City East Khasi Hills
State Meghalaya
Key Dates
Publish Date 17 Sep 2026
Submission Date 08 Oct 2026
Open Date 09 Oct 2026
Finance
Tender Value 48.32 Lakhs
Tender Fee 500
EMD 96640
Exemption Available
Document List
8e06a12c-5aa9-47ba-b838-8a7e828ac273.html
BOQ_885531.xls
TENDERDOCU68.pdf
Tendernotice_1 (10).pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Sep 17, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Oct 08, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 3 days
Oct 09, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 4 days

Tender Documents

Download All (ZIP) ↓
html

8e06a12c-5aa9-47ba-b838-8a7e828ac273.html

xls

BOQ_885531.xls

pdf

TENDERDOCU68.pdf

pdf

Tendernotice_1 (10).pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders