Tender For Addition/Alteration To Surface Drain At Certain Locations At Arde Under Ge(I) R&D Pashan, Pune
Tender Value
Ref. Documents
Estimated cost
Bid Submission
08 Oct 2026
4 days left
EMD
96000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pune → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Addition/Alteration To Surface Drain At Certain Locations At Arde Under Ge(I) R&D Pashan, Pune
BOQ
| Sl. No. | Item Description |
| 1 | Demolishing brick work/Stone/ PCC Block masonry work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead In cement mortaras per direction of Engineer-in-charge. |
| 2 | Material and labour for Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) with Cement mortar 1:6 (1 cement : 6 coarse sand) complete all as specified and directed |
| 3 | Material and labour for walling of random rubble, brought upto course, well bonded, bedded and solidly hearted, built in CM (1:6) including provision of precast PCC bond stone but except stone incl removing mortar and cleaning the stone, stacking for measurement and removal and disposing of debris etc complete all as specified and directed. |
| 4 | Material and labour for extra over granite or trap stone walling for hammer dressing to face stones and dressing of face beds and joints as specified of face beds and joints as specified of random rubble walling uncoursed or brought upto course with 40mm maximum depression on face from straight edge held against the dressed surface complete all as specified and directed. |
| 5 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead complete all as specified and directed. |
| 6 | Material and labour for keyed pointing to random or polygonal rubble, uncoursed or brought upto courses in CM (1:3) complete all as specified and directed. |
| 7 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil complete all as specified and directed. |
| 8 | Excavation work by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils as directed, within a lead of 50 m.Ordinary rock, complete all as specified and directed. |
| 9 | Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 10 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:4:8 (1 cement : 4 manufactured sand derived from Recycled Concrete Aggregate (RCA) : 8 graded stone aggregate 40mm nominal size Recycled Aggregate (RA) complete all as specified and directed |
| 11 | Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing: ii)1:2:4 (1 Cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size) complete all as specified and directed |
| 12 | Material and labour for Pre-cast cement concrete block masonry with solid blocks, exc 10cm in width and setting in mortar. including necessary form work, if any, and finishing exposed surface even and smooth without using extra cement complete all as specified. |
| 13 | Rendering 15mm thick in CM 1:4 on Brick or stone or concrete surfaces finished even and fair without using extra cement complete all as specified and directed. |
| 14 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 15 | Providing & fixing Steel work welded in In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required complete all as specified and directed |
| 16 | Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications : Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand and manufacture complete all as specified and directed |
| 17 | Providing and fixing factory-made, steam-cured precast Reinforced Cement Concrete (RCC) drain cover slabs of M-30/M-40 grade . Reinforced with Fe500D TMT bars(8mm dia @100c/c on both sides) or high-tensile wire . Surface to be finished smooth with a floating coat of neat cement. Includes provision for recessed lifting hooks, chamfered edges, and seating on the drain wall with a 1:3 cement mortar bed . Designed to withstand Class AA/Heavy Duty (HD-20) vehicular loading as per IS:12592 complete all as specified and directed |
| 18 | Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer -in-charge.100 mm nominal size dia complete all as specified and directed Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 17, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 08, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysOct 16, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 12 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender