Tender For Repair To Epoxy Flooring And B&R Related Works In Hangers Of Avn Sqn Incl Technical Areas In Aor Of Age B/R Lekhanagar Under Ge Nasik Road
Tender Value
48 Lakhs
Estimated cost
Bid Submission
08 Oct 2026
18 days left
EMD
96000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Nashik → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair To Epoxy Flooring And B&R Related Works In Hangers Of Avn Sqn Incl Technical Areas In Aor Of Age B/R Lekhanagar Under Ge Nasik Road
BOQ
| Sl. No. | Item Description |
| 1 | Epoxy Polyurethane Coating (EPU)Supplying and applying Electro Static Discharge (ESD) Ployurethane flooring System as per the following Specification and epoxy flooring should be done by manufacturer's authorised applicator:-(a) Surface preparation: preparing the existing surface of floor by using proper scarification eqpt and cleaning by wire brushing & blow etc, to remove all dirt, dust, oil etc to expose clean sound base concrete. Cost shall include any imperfections in the concrete shall be treated with suitable repair system as per manufacturer specification. Note:-(i) Material /Chemicals required for repairing crack, potholes and damaged areas shall be paid separately at supply only rates. (ii) Treatment of construction and expansion joints including filling as per manufacturer's specification and as directed, which shall be paid separately.(b) Primer: Supply and application of moisture insenstive solvent free epoxy bonding primer over the prepared surface (Floor/coving) in a thin continuous film and work the Primer into the surface using a stiff brush or roller. Apply second priming coat on identified light colored dry patches over first coat.(c) Base Coat/Scratch Coat : Supply and application of 1mm thick base layer with cementitious Polyurethane of self smoothing self levelling epoxy underlay spread evenly to maintain the thickness using a serrated trowel followed by spike roller, rolled over the levelled underlay to remove any entrapped air all as per manufacturer instructions and as specified. |
| 2 | (d) Anti Static grid : S&F copper earth strip of size 25mm wide and 80 micron thick, fixed over the floor area along the perimeter and internally with a grid size of min 3x3m and max 5m between strips. The surface shall be treated with aqueous anti static epoxy system, conductive under coat spread as specified and as manufacturer's instructions. The conductivity of the under coat shall be 2x10^3 ohms - 4x10^3 ohms. The entire system to be connected to earth pit and testing complete. (e) Epoxy Polyurethane Coating (EPU): Providing 3 mm thick epoxy polyurethene ESD flooring, having 28 days compressive strenght as per ASTM C 109 45 mPa, Flexural strenght will be 12 mPa as per BS 6319-3, Tensile strength will be 4 mPa as per BS 6319-7, having surface of earth resistance <1x160 Ohms. The fire resistivity of the material of class 2 as per BS 476-7.Make: Fosroc, Pidilite, Sika, Flow crete. Note: Epoxy flooring should be done with authorised applicator of manufacturer. While seeking approval, contractor should submit name of authorised applicator, failing which no approval will be given. |
| 3 | Supply only material /Chemicals required for repairing crack, potholes and damaged areas as per manufacturers speccfications. |
| 4 | Racking out existing construction joints/dummy joints 10mm wide x 25mm deep in concrete pavements, cleaning surfaces and sweeping to make the surface free from dust/dirt with air compressor/ blower and removing debris to distance exceeding 200m from edge of pavement for disposal in low laying areas |
| 5 | Racking out existing Expansion joints 20mm wide x 25mm deep in concrete pavements, cleaning surfaces and sweeping to make the surface free from dust/dirt with air compressor/blower and removing debris to distance exceeding 200m from edge of pavement for disposal in low laying areas. |
| 6 | M&L for nosing the damaged edges of the construction joints using epoxy mortar and make joints straight and smooth, filling the joints using flexible Elastomeric sealent of Polysulphide / polyurethene make including fixing of backer rod with straight edge finish all as specifide and as directed. Make: Fosroc, Pidilite, Sika, Flow crete |
| 7 | M&L for nosing the damaged edges of the expansion joints using epoxy mortar and make joints straight and smooth, filling the joints using flexible Elastomeric sealent of Polysulphide / polyurethene make including fixing of backer rod with straight edge finish all as specifide and as directed.Make: Fosroc, Pidilite, Sika, Flow crete |
| 8 | M&L for gangway yellow line marking not exc 150 mm wide in in floors. Fixing of masking tapes on bith sides of line, cleaning the surface using solvents, mixing two components high build coating in two coats of 0.50mm (min) thickness each and removing masking tapes followed by neat finish as directed. Make: Fosroc, Pidilite, Sika, Flow crete |
| 9 | M&L for gangway yellow line marking not exc 300 mm wide in in floors. Fixing of masking tapes on bith sides of line, cleaning the surface using solvents, mixing two components high build coating in two coats of 0.50mm (min) thickness each and removing masking tapes followed by neat finish as directed. Make: Fosroc, Pidilite, Sika, Flow crete |
| 10 | M&L for Painting lines, dashes, arrows, letters and painting dispersal area etc. on roads, concrete pavements and like exc 10cm wide with two coat of water based paint, white or golden yellow including preparation of new or previously treated surfaces to receive the painting.(Painting shall stand out boldly and solidly without showing signs of brush marks or surface underneath. If necessary, the surface shall be repainted by one or more coats until the desired result is obtained) |
| 11 | M&L for painting lines, dashes, arrow letters etc on road pavement, parade ground and applying 2mm thick road marking strips (reflective) of specified shade/colour using hot thermoplastic material by fully/semi automatic application machine fitted with profile stone heater driven by experienced operator on road surfaces including preparation of previously treated surfaces and and complete removal of old paint with steel wire brush and any other equipment, cleaning surfaces of all dust, scales oils grease and foreign materials etc complete all as specified and directed. |
| 12 | Dismantling wall false ceiling boards (fibre, pulp, insulation etc.) or insulation boards/slabs any thickness, complete all as specified. |
| 13 | S&F Hollow PVC Wall Lining consisting of 5 to 7 mm thick Plain wood grain printed PVC sheet inclusive of solvent cement and fixing with 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall as per specifications, taking down carefully (copper/aluminium) point wiring/ switch board in wall and ceiling and refixing the same in any position, complete as speified and directed. Note: Work is to be executed for hangar bldgs and height aspect be considered while quoting the rate. |
| 14 | S&F in position suspended false ceiling system using T-grid suspended grid system . The size of grid shall be 600x600mm with GI frame work main runner 38x24x3600mm, cross T 25x24x600mm/ 25x24x1200mm and wall angle 24x24x2540mm (thickness of the materail of 0.30mm) using 9mm thick ceiling panel laminated with PVC film on front face and foil back available in the drop texture as per IS-2095, Part-I 1996, fixed in the grid of T-grid suspended ceiling grid system duly susupended by 4mm dia GI bar hanged from the purlins of the roof with butter fly clips complete all as specified and directed.Make: Geproc, Lafars, Armstrong Note: Work is to be executed for high rise bldgs and any height and no extra will be paid. |
| 15 | M&L for preparation and complete removal of existing wall surfaces of applying one coats of oil bound distemper using Airless spray technology with max working pressure of 3300 PPSI and capable of operating single spray gun with a max material hose length of 30 m the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper should be able to spray in hard to reach areas and penetration of distemper on the surface to achieve excellent application using limited manpower complete all as specified and directed. |
| 16 | M&L for preparation and complete removal of existing ceilling surfaces of applying one coats of oil bound distemper using Airless spray technology with max working pressure of 3300 PPSI and capable of operating single spray gun with a max material hose length of 30 m the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper should be able to spray in hard to reach areas and penetration of distemper on the surface to achieve excellent application using limited manpower complete all as specified and directed. |
| 17 | M&L for preparation and complete removal of existing wall surfaces applying two coats of oil bound distemper using Airless spray technology with max working pressure of 3300 PPSI and capable of operating single spray gun with a max material hose length of 30 m the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper should be able to spray in hard to reach areas and penetration of distemper on the surface to achieve excellent application using limited manpower complete all as specified and directed. Note for item No 15 to 17:- i) Sanding of surface to be done by mechanical sander with 1500-2700 rpm, with internal dust extraction system for clean environment certified by paint manufacturer.ii) Work is to be executed for hangar bldgs and height aspect be considered while quoting the rate. |
| 18 | Preparation of old decorated brick/concrete plastered/unplastered surfaces of walls, pillars, cornices by washing, rubbing down and stopping of old distempered surfaces by wire brush and applying one coat of oil bound distemper complete. Note: Work is to be executed for hangar bldgs and height aspect be considered while quoting the rate. |
| 19 | M&L for preparation and complete removal of existing surfaces and applying two coats of oil bound distemper over a one coat of primer on walls and ceilling, pillars cornices complete all specified and directed. |
| 20 | M&L for average 2mm thick wall care putty on wall and Ceiling. Note: Work is to be executed for hangar bldgs and height aspect be considered while quoting the rate. |
| 21 | M&L for One coat of white wash on ceiling including preparation of plastered or unplastered surfaces by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greas spots; removing nails, good holes,cracks etc. by filling with putty. Note: Work is to be executed for hangar bldgs and height aspect be considered while quoting the rate. |
| 22 | M&L for applying one coat of exterior weather proof 100% anti fungal acrylic smooth emulsion with silicon additives that offer anti alge high performance exterior wall finish with 6 years of performance warranty by manufacturer applied by using Airless spray technology with max working pressure of 3300 PPSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacture with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying Apex, should be able to spray in hard to reach areas and penetration of distemper on the surface to achieve excellent application using limited manpower complete all as specified and directed. Make: Asain (Ultima) and equilent Berger/Nerolac . Note : work is to be executed for high rise bldgs and any height and no extra will be paid. |
| 23 | M&L for applying two coat of exterior weather proof 100% anti fungal acrylic smooth emulsion with silicon additives that offer anti alge high performance exterior wall finish with 6 years of performance warranty by manufacturer applied by using Airless spray technology with max working pressure of 3300 PPSI and capable of operating single spray gun with a max material hose length of 30 m the spray machine should be of reputed manufacture with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying Apex, should be able to spray in hard to reach areas and penetration of distemper on the surface to achieve excellent application using limited manpower complete all as specified and directed. Make: Asain Paint and equilent Berger/Nerolac |
| 24 | M&L for complete removal of existing treatment to wall by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots, washing, removing nails, removing vegetation growth of any size and penetration to the entire satisfaction of ground executives, sealing holes, cracks of any width/depth by waterproof crack sealing compound (premium quality as approved by GE) and applying one coat of exterior emulsion paint on walls surfaces.Make: Berger weather coat long life 10/ Asian apex Ultima/any other equivalent make as approved by GE. Note: Work is to be executed for hangar bldgs and height aspect be considered while quoting the rate. |
| 25 | M&L for complete removal of existing treatment to wall by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots, washing, removing nails, removing vegetation growth of any size and penetration to the entire satisfaction of ground executives, sealing holes, cracks of any width/depth by waterproof crack sealing compound (premium quality as approved by GE) and applying two coat of exterior emulsion paint on walls surfaces.Make: Berger weather coat long life 10/ Asian apex Ultima/any other equivalent make as approved by GE. Note : Work is to be executed for high rise bldgs and any height and no extra will be paid. |
| 26 | Taking down anti bird netting of any description at any position and any height complete all as specified and directed.Note: Work is to be executed for hangar bldgs and height aspect be considered while quoting the rate. |
| 27 | M&L for bird proofing net made of anti bird net in UV black colour made of material Polyolefin all weather proof Co-polymer of machine knotting using CNC machine with DSLS technology for anti silp knotting, heat setting should be steam saet for greater dimensional stability and knot firmness and diameter of the twine is 1mm and size of mesh 25x25mm (+2) and should achive twine breaking strength of 16 Kgf (160N) minimum and MBS (mesh breaking strength) 12 Kgf (120N) and KBS (Knot breaking strength) 22 Kgf (220N) minimum, fixed as per manufacturers instructions complete on trusses. Bird proofing arrangement shall fixed/tied to truss members (at any height / any location ) with nylon wire as per manufactures instructions & as directed.Make- Leo Technova India, Garware bird net, Navpoly, Kwality nets, RC Netting Solutions, Hi Bro Product. Note: Work is to be executed for hangar bldgs and height aspect be considered while quoting the rate. |
| 28 | Dismantling stone slabs and tiles of any description or thickness in floors, aprons etc. laid, bedded and pointed in any mortar. |
| 29 | M&L for Granite (Jet black) 20mm thick machine cut (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like laid over and including 15mm thick screed bed in CM 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match. |
| 30 | Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations (Stone slabs so provided shall be not less than 900mm in length) |
| 31 | Demolition of brick work or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc. |
| 32 | M&L for Brick work with fly ash bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 using old size bricks. |
| 33 | M&L for Brickwork with fly ash bricks, straight or curved on plan to any radius in half brick thick walls, built in CM 1:4 using old size bricks. |
| 34 | Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. |
| 35 | M&L for rendering 15mm thick in CM 1:4 on faces of brick work or concrete surfaces finished even and smooth without using extra cement.Note : Redering is to be carried out in two layers, 1st layer shall be 10 mm in CM 1:4 and 2nd layer/finishing layer shall be 5mm in CM 1:4 with WPC as specified and directed and WPC shall be paid separately. |
| 36 | M&L for rendering 10mm thick in CM 1:6 on faces of brick work or concrete surfaces finished even and smooth without using extra cement. |
| 37 | M&L for 5 mm thick plaster in CM 1:3 to ceiling soffits and sides of beams, facias, cannopies, chajjas, shelves, cup board etc. |
| 38 | M&L for preparation of newly plastered surfaces of wall and applying two coats of distemper oil emulsion over a coat of primer and over 1.5mm thick wall care putty complete all as specified and directed. |
| 39 | M&L for preparation of newly plastered surfaces of ceiling and applying two coats of distemper oil emulsion over a coat of primer and over 1.5mm thick wall care putty complete all as specified and directed. |
| 40 | Taking down chowkhats or frames with shutters (without taking off shutters from the frame) n exc 1.5 sqm each. |
| 41 | Taking down chowkhats or frames with shutters (without taking off shutters from the frame) exc 1.5 sqm but n. exc 4 sqm each |
| 42 | M&L for factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/ Chowkhat of size 65x125 mm (double rebated) comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity Index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardantand fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete all as directed. |
| 43 | M&L for factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/ Chowkhat of size 50x100 mm (single/double rebated) comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof, water/ moisture proof and fire retardantand fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as directed. Please Enable Macros to View BoQ information |
| 44 | M&L for factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/ Chowkhat of size 50x100 mm (single/double rebated) comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof, water/ moisture proof and fire retardantand fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 17, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 08, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysOct 10, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 20 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender