Tender For Provn Of Certain Sanction Work In The Area Of Age B/R-I And Age E/M Under Ge (Central) Delhi Cantt-10
Tender Value
48.34 Lakhs
Estimated cost
Bid Submission
08 Oct 2026
9 days left
EMD
96680
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
New Delhi → Delhi
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provn Of Certain Sanction Work In The Area Of Age B/R-I And Age E/M Under Ge (Central) Delhi Cantt-10
BOQ
| Sl. No. | Item Description |
| 1 | M&L for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) includingdistance pieces, cleats etc.Fe 410 -W (GdeE- 250) quality A all as specified and directed. |
| 2 | M&L for Preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described, and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer, complete all as specified. |
| 3 | S & F Expanded metal n exc 4 kg weight per square meter, cut to length, bent to shape required and tying with and including annealed mild steel wire not less than 0.9mm dia or fixing with galvanised steel staples supplied and fixed complete to wood or steel members all as specified and directed. |
| 4 | Excavation in post holes (or similar holes) in any type of soil, each not exceeding 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25 cm, watering and removing surplus spoil to distance not exceeding 50 mtr and making good surface complete all as specified and directed by Engineer-in-Charge |
| 5 | M&L for plain cement concrete (1:4:8) type D-2 using 40 mm graded stone aggregates, 75mm thick in foundation filling and mass concrete all as specified and directed by Engineer-in-Charge. |
| 6 | S&F for fe 410-w (Gde-E-250) Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates all as specified and directed by Engineer-in-Charge. |
| 7 | S & F Pre-painted galvalume aluminum Zinc coating GI based Corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as all as specified and directed by Engineer-in-Charge |
| 8 | S&F Modular Cabinet Kitchen accessories of Stainless Steel grade-304,6mm size rod thickness including :-(i) Perforated Cutlery basket, (ii) Grain trolley, (iii) Thali basket, (iv) Cup & saucer basket, (v) Glass basket, (vi) Plate basket, (vii) Premium magic corner (viii) Oil Pull out Tray ( Triple basket layer) , (ix) Dust bin, (x) Cleaning kit rack of size as per site requirement all spd and directed by Engr in charge |
| 9 | S & F 50 mm dia Galvanised Iron steel tubing, medium grade as in spout in short length, complete all as specified. |
| 10 | S&F in Soft closing ball bearing telescopic channel of size 22 inch long fixed with screws in cupboards incl all fittings complete all as spd and directed by Engr in charge.Note : Runner/ Channel should be SS 304 grade and load capacity should not be less than 45 kgs |
| 11 | S&F Factory Made 18mm thick 100% Solid WPC ( Wood polymer Composite ) Laminated Board of required size comprising of virgin PVC resin of K Value 57-60 ( Suspension Grade ), Calcium Carbonate and natural fibers ( Wood Powders/ rice husk/ wheat husk ) and Non toxic additives, made from Extrusion process WPC foam sheet Single Extruded ( Inner ) with having minimum density not less than 650 kg/cbm having good screw holding capacity ( Screw Withdrawal strength of 2000 N ( Face ) & 1100 N ( Edge ), Minimum Compissive of 50 N/mm2 , Modulus of elasticity 850N/mm2 and esistance of spread of flame of Class A category with Property of being Termite/ Borer Free.Water/ Moisture Proof and Fire Retardant. WPC to be Laminated with PVC foil of minimum 14 microns thick of approved design pasted on both faces of shutter and fixinng stainless Steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws. All as per direction of Engineer -In-Charge, Material test certificate and authentication should be compulsory provided by the manufacturing company : For WC/Bathroom/Toilet/Kitchen and Cabinets. |
| 12 | S&F factory made uPVC white colour three track three panels sliding window with flyproof S.S. wiremesh ( Two nos. glazed & one no. wiremesh panels ) upto 1.50m ht made of big series frame 116 x 45mm & sash 46 x 62mm both having wall thickness of 2.3 + 0.20mm and single glazing bead/ double glazing beading of appropriate dimension ( Area of window upto 2.0 sqmtr) comprising of uPVC multichambered frame and mullion (wherevr required) extruded profile duly reinforced with 1.60 +0.20mm thick galvanised mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropraiate dimension, EPDM gasket, G.I. fasteners 100 x 8mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless screw etc.Profile of frame & sash shall be miterd cut and fusion welded at all corners, mullion (if reqd) shall be also fusion welded including 5mm thick toughened glass and SS wire mesh fixed and drilling holes for fixing hardwares and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of reqd size and approval quality, all complete as per approved drg and direction of Engr in charge. Note: For uPVC frame, sash and mullion extruded profiles ,minus 5% tolerance in dimension i.e depth and width of profile dimension in higher side shall be acceptable but no extra payment on this account shall be made |
| 13 | M & L for 75 mm thick cement concrete 1:3:6 type C2 (using 40mm graded stone aggregate) as in plinth protection laid in bays & surfaces finished fair and even without using extra cement, complete all as specified. |
| 14 | M&L for 50mm thick PCC 1:3:6 type C2 using 20mm graded stone agg as in sub base complete all as specified.. |
| 15 | M&L for 22 to 25mm chequered ultra tiles over 15 mm thick screed bed in cm 1:6 and jointed and pointed in white cement mixed with pigment to match the shade of tiles of flooring all as directed. |
| 16 | M&L for Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick rendering in cement mortar (1:4) complete all as specified and as directed. |
| 17 | S&F mild steel as in hand rail, balusters, noising to steps, post and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, drilling, bolting or riveting etc, conforming to Fe-290 , Gde-E-165 including two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed by Engineer-in-Charge. |
| 18 | M&L for machine pressed precast concrete interlocking paver block with gray cement and no pigment, any shape and size confirming to IS- 15658 -2006 of 80mm thickness, M-40 Gde,Over and including 20mm thick layer of sand complete all as specified and directed. |
| 19 | M&L for 100mm thick PCC (1:4:8) Ty D2 as in sub base over rammed earth. |
| 20 | M & L for Non skid 600x600x8 to 10mm thick coloured ceramic tiles as in floor over hacking surface of existing floor on 15mm thick screed bed in CM 1:6 including pointing in coloured cement to match the shade of tiles. |
| 21 | M&L for Anodised aluminium door shutters,aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, ruber neoprene packing,handles 2 Nos in each door, hinges,anodised aluminum snap beadingscrews etc. complete all as specified |
| 22 | M&L for Powder coated aluminium(minimum thickness of powdercoating 50 micron) work for doors,windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS:733 and IS:1285, fixing with dash fasteners of required dia and size,including necessary filling up thegaps at junctions, i.e. at top,bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle,Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge |
| 23 | S&F 4.8 mm thick sheet glass, ordinary quality and glazing in Aluminium door with solar control files 50 micron in squares exc 0.5 Sqm each pane. |
| 24 | M&L for PVC false ceilings 6mm are watertight, just like gypsum false ceilings, and are more effective and lasting in high moisture environments like balconies, bathrooms, and basements |
| 25 | S&F 2mm thick fibre glass reinforced translucent plain sheeting with side lap fixed with srew. |
| 26 | M & L for 15 mm thick internal rendering in cement mortar 1:6 on fair face of brick walls/ concrete surfaces & finished even and smooth without using extra cement, complete all as specified. |
| 27 | M&L for brick work with subclass 'B' bricks, straight or curved on plan to any radius in half brick thick walls with old size bricks, built in cement mortar 1:4, complete all as specified. |
| 28 | M&L for brick work with sub class 'B' brick straight or curved on plan exc 6 metre mean radius with old size bricks, built in cement mortar 1:6, complete all as specified. |
| 29 | Supply only 3.15 mm dia galvanised steel chain link fencing, 50X50 mm mesh, made up into mattrsses or cages, lapped, wired a all as specified. |
| 30 | Fixing only chain link fencing including line wires any mesh, size and type to any to any type of standard, rail, straining bolts, etc. including provn of winding wire all as specified. |
| 31 | M&L mild steel round bars 10 mm dia conforming to FE-410-W (Gde E-250) quality A or Fe-290 (Gde E-165) for use in chain link fencing as wind tie all as specified. |
| 32 | Mild steel screw bolts(machine made) with hexagonal or square heads at one end screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt not exceeding 30 cm and dia of neack exc 12 mm but not exc 20 mm complete all as specified and as directed by Engineer-in-Charge. |
| 33 | Excavation in trenches n exc 1.50 m wide and n exc 1.50 m in depth for fdn and getting out in any type of hard/dense soil. |
| 34 | M&L for PCC 1:2:4 type B-2 (using 40mm graded stone aggregate) as in bed drain. |
| 35 | M&L for PCC 1:3:6 type C-1, (using 20mm graded stone aggregate) as in coping including weathering, slightly rounded or chamfered angles and throating. |
| 36 | M&L for cement concrete 1:2:4 type B1(using 20mm graded stone aggregate) as in blocks for hold fast, coping, including form work to concrete surfaces, complete all as specified. |
| 37 | M&L for Vitrified tile ultra charge , 9-10 mm thick (square/ rectangular) polished, area of each tiles not exceeding .38sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in cement mortor 1:6 complete all as specified. |
| 38 | M&L for preparation of old/new decoreated/undecoreated external wall applying two coats of berger weather proofing exterior acrylic emulsion paint up to 8 storey bldg complete all as specified and all as directed by Engr- in-charge. |
| 39 | M & L for Point wiring complete with 1.5 sqmm single core PVC insulated FRLSH cable unsheathed 1100 volts grade with multi stranded copper conductor drawn through and including non-metalic rigid new PVC conduit medium grade ISI Marked not less than 20 mm dia and all conduit accessories concealed in wall on surface in ceiling/fixed to roof/truss/columns etc and including provision of 1.5 sqmm PVC insulated copper cable FRLSH unsheathed as earth continuty, fabricated modular metal flush box, concealed in walls with suitable modular inner and outer plate for housing switches, socket out let and fan regulators etc, complete all as specified. |
| 40 | All as per item No 39 here -in-before but one light / fan point controlled by one switch. |
| 41 | All as per item No 39 here -in-before but one 3 pin 5 Amps socket outlet point controlled by one No one way switch on independent board but not below the switch board of light points in same vertical plate. |
| 42 | All as per item No 39 here -in-before but but with 4 sqmm single core FRLS copper cable. |
| 43 | All as per item No 39 here -in-before but but with 2.5 sqmm single core FRLS copper cable. |
| 44 | M&L switch Modular type 6 Amps one way ISI marked 230V AC complete all as specified Make : Legrand Cat Part No 573400 / Schnider Cat No X1001WH / Wipro Cat No RF 110 |
| 45 | M&L Modular socket outlet 3/5 pin 6 Amp socket 2 module ISI marked complete all as specified Make : Legrand Cat Part No 573424/ /Schnider Cat No X2005WHNS/ Wipro Cat No R 1212 |
| 46 | M&L ceiling rose PVC polycorbonate,isolated body. complete all as specified. |
| 47 | Supply and fixing ceiling fans three blade, Robust and reliable inverter motor (brush less DC Motor) powered by ECM technology, BEE 5 star rating for energy saving, rated Air delivery >220 cum/min, service valve > 6, AC single phase 230/240 V,50 Hz of size 1200 mm sweep , with down rod, canopy, electronic fan regulators, remote with battery including remote of ceiling fan and all accessories including making connection with three core flexible, copper cable pvc insulated of suitable length, complete all as directed. |
| 48 | Supply & fixing wall fan 400 mm sweep 3 blade metal type including provision of 3 core PVC insulated sheathed 1100 volts grade flexible cable with stranded copper conductor, length as per requirement at site complete all as specified and directed. |
| 49 | Supply & fixing padestal fan stand mounting AC single phase 230/240 V, of size 500 mm sweep, speed RPM 1400, Sturdy and shock proof body for fixing of fan complete all as specified & directed. |
| 50 | Supply & fixing fresh air fan PVC body, air delivery > 800 CMH , 5 number of blades, AC single phase 230/240 V of size 250 mm sweep with louvre fixed complete with suitable size ply by cutting into suitable size as required complete. |
| 51 | Supply and fixing Exaust fan metal body, AC 450 mm sweep, Air flow rate > 900cum/min, Bird screen for protection against birds, double ball bearing, 1400 RPM, metal body with louvre single phase including with louvers and provision of cable from cealing rose to fan. |
| 52 | M&L sub main wiring with two single core PVC insulated FRLS cables with stranded copper conductors 4.0 Sqmm ,1100 volts grade on & including PVC conduit not less than 20 mm dia complete with all accessories medium grade and copper cable 4 Sqmm continuous earth wire complete all as specified and directed.(Note:- (a) Two runs of wire with 01 run of earth wire and conduit pipe shall be measured as one length. |
| 53 | S&F Modular box with MCB 20 Amp complete with metal box and 3 Pin, 15 Amps plug top complete all as specified and directed.Note : Rates are inclusive of cutting / chases for mounting Modular metal box concealed in wall and making good to the disturbed surfaces with OBD / colour wash / white wash and wall putty where ever is required. |
| 54 | S & F water heater storage type Geyser vertical type with suitable size of fastner and copper inner tank and outer body material of ABS with high pressure with standing enabling (up to 8 bar pressure) capacity including provision and connecting up of SS braided pipe og size 15 x 60 mm long with brass adopter for inlet and outlet water connection having adjustable knob for temperature control , digitial display for showing the temperature of geysers and inner tank should be glass line coated, capacity 25 Ltrs, having heating element 2.0 KW with ISI marked suitable for hot and cold water and not less than 5 star rating, suitable for, 230 volt, 50 Hz electric supply complete all as specified and directed. |
| 55 | S&F SS braided connection with brass nipple 15 mm x 600 mm long with ISI marked suitable for hot and cold water of 25 ltrs capacity of geyser as hot and cold water connection complete all as specified and directed. |
| 56 | S&F 15mm bore galvanised iron pipe medium grade with all fittings fixed to wall / ceiling or laid in floor including connections complete all as specified and directed. |
| 57 | S&F bib tap 15mm bore of cast copper alloy (heavy duty) CP fancy type scrwed to iron pipe and fixed complete all as specified and directed. |
| 58 | S&F stop cock of 15 mm dia cast copper alloy (heavy duty) CP fancy type screwed for iron pipe and fixed complete all as specified and directed. |
| 59 | Cutting chases for concealed water tubing or concealed conduct wiring etc and making good cutting n exc 10 cm girth in brick wall complete all as specified and directed. |
| 60 | S&F switch Modular type 16 Amps 1 Way,1 module, 230V AC complete all as specified and directed by Engineer in charge. |
| 61 | S&F Modular socket outlet 6A/16 Amp 2/3 pin 2 module complete all as specified and directed by Engineer in charge. |
| 62 | M&L for breaking old existing wall and making a provn for fixing of Electric Chimany pipe of suitable size as issued or recommended by OEM including making good to the disturbed wall/ portion and matching with existing colour all as specified and directed. |
| 63 | Supply and Fixing wall mounted angular Electric chimney black colour of suction power not less than 1200Cum/Hr, Al casette with stainless steel outer layer ,touch control panel,3 speed motor with 250 watt with decorative smart cooker hood SS and glass, energy efficent Led light with digital display , including ducting not less than 12 feet as per site required complete all as specified and as directed by Engr-in-Charge. |
| 64 | Supply,installation, testing and commissioning instant electric water heater with heating element of capacity 3 ltrs complete with all accessories such as safety valve, thermostat, NRV, SS braided pipe of hot water grade, SS water mixture,angle valve, water connection pipe of suitable dia as required at site and cinnecting it with old/existing pipeline of any description and connecting with water mixture complete with all other accessories reqd for making water connections all as specified and directed. |
| 65 | Supply and fixing and connecting LED post top light die cast aluminium housing spigot, powder coated top cover opal PC diffuser having IP 65 protection complete suitable for B22 base 14 watt bulb including 14 watts LED bulb including making necessary electrical connections with suitable size copper multi stranded 1100 volts grade FRLS cable and grouting with PCC base of required size and ratio including nuts, bolts and washers etc as required at site all as specified and directed. |
| 66 | Supply and fixing LED bollard light aluminium extrusion, opal, polycarbonate diffuser for spot free lighting having IP 65 protection complete suitable for B22 base 14 watt bulb including 14 watts LED bulb and making necessary electrical connections with suitable size copper multi stranded 1100 volts grade FRLS cable and grouting or mounted on PCC base of required size and ratio including nuts, bolts and washers etc as required at site all as specified and directed. |
| 67 | S&F including connecting twin core cable 6 Sqmm PVC insulated heavy duty 1100 volts grade, aluminium conductor drawn through and including 25 mm dia non metallic rigid PVC conduit burried in ground including earth work not less than 30cm deep minimum and returning filling and removal of soil all as required at site alongwith conduit accessories all as specified and directed. |
| 68 | M&L Sheet metal enclosure for DBs when MCBs to be used 8 way double door 240 volt. |
| 69 | S&F MCB SPN 32 Amps 240 volts 10 KA. |
| 70 | S&F MCB SP 6-32 Amps 240 volts 10 KA. |
| 71 | S&F LED lightt fitting 20 watt 240 voltt decorative type with driver,holder including LED tube light connecting up with three core flexible cable cvopper conductor of suitable size from ceiling rose complette all as specified. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 17, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 08, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 9 daysOct 10, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 11 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender