Tender For Providing Of Pt Shed At Gopalpur Mil Stn
Tender Value
3.45 Crore
Estimated cost
Bid Submission
22 Oct 2026
29 days left
EMD
4.20 Lakhs
Bank guarantee accepted
Document Fee
2000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ganjam → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Providing Of Pt Shed At Gopalpur Mil Stn
BOQ
| Sl. No. | Item Description |
| 1 | SCHEDULE \\"A\\" Part-I (Building/Structures) (To be quoted by the tenderer) |
| 2 | Item no 1: Design and construction of Physical training shed (Size of Each Shed : 36m X12m ) having ceiling height of 5.5 m, with permanent specification, RCC Framed Construction, M-30 Concrete, Provn of ATT, APP for roof treatment, exterior emulsion / Weather Coat in external surface finish complete all specified in design basis report, drawings and tender documents. |
| 3 | Sch 'A' Part-II (External Electrical Supply) Lump sum price worked out by the contractor for 'External Electrifical Supply' as listed in Schedule 'A' Part-II against the lump sum price inserted by the MES. |
| 4 | Sch 'A' Part-III (Road Path Culvert) Lump sum price worked out by the contractor for 'Road Path Culvert', excavation & earth works' as listed in Schedule 'A' Part-III against the lump sum price inserted by the MES. |
| 5 | Sch 'A' Part-IV (Area Drainage) Lump sum price worked out by the contractor for 'Area Drainage' as listed in Schedule 'A' Part-IV against the lump sum price inserted by the MES. |
| 6 | Sch 'A' Part-V (SITE CLEARANCE) Lump sum price worked out by the contractor for 'SITE CLEARANCE' as listed in Schedule 'A' Part-V against the lump sum price inserted by the MES. |
| 7 | Note for Srl No 3 to 6The percentage above / below the SSR -2020 (part-II) rates shall be derived from the amount quoted by the contractor against Srl No. 3 to 6 by comparing it with the amount inserted / pre- priced by the department and the same shall be applicable for the items of respective schedule |
| 8 | Schedule 'A' Part-VI (Miscellaneous items of works) |
| 9 | Area Drainage |
| 10 | Item No 02 : Material & Labour for Precast drain of High strength precast reinforced concrete M-40 grade using Fe 500 D grade TMT steel reinforcement bar, drains size 450 x 450 {WXH) U shape, Section of drain shown on drawing , manufactured with high performance self compacting concrete, as per Japanese lndustial standers (JIS) confirming to Indian Standards and capable of carrying a wheel load of 2.4 tonnes for light veh movement Useful for appications such as storm water drains, laying over PCC lean concrete and dry bedding mortar {PCC & dry bedding mortar measured and paid seperatly) and jointing/fixing of each panel with ready mix cement mortar as per manufacture instruction and shown typical joint details & Drawings complete all as spd and directed. |
| 11 | Ext Elect Supply |
| 12 | Item No 03 : Supply, installation, commissioning and testing indoor type LT wall mounted Panel of minium size 1.20m(height) x 1.20 m(breath) x 0.30 m (depth) factory made CPRI approved panel,weather,duster & vermin proof indoor double door, front openable, including four compartment for fixing of five Nos single phase meter and MCB and providing glass view for reading of meter and providing rubber /PVC gasket of suitable size all sides of door, |
| 13 | with copper busbar wrapped with PVC tapes /sleeves with maintained the colour code and copper strip /wire busbar of suitable size to MCCB input and MCCB/MCB output of suitable length for connection of cable from main busbar, made out of 2 .0 mm thick mild steel CRCA sheet with suitable size angle iron supporting frame including applying two coats of powder coated paint over a coat red oxide zinc chrome primer over exposed external & internal surfaces suitable for 3 phase 4 wire system 415/440 volts grade including complete internal wiring with 1.5/2.5 sqmm copper wire and connections of all outgoing /incomming existing cable of any size complete all as directed by Engineer-in-Charge. |
| 14 | INCOMING:-(a)MCCB,4 Pole, 415Volts,Lcu-16KA breaking capacity ,IP-44 and IP66/67 protection,125Amps rating adjustable thermal magnetic release including all fixing accessories with both ends spreaders links-01 No. |
| 15 | (b) Copper strip busbar of size 25X5 mm wrapped with PVC sleeves with maintained the colour code and provision of making holes with copper nuts,bolts & washers for cable connections including hydrograpic insulators with nuts & bolts at both ends, amps rating x1.5 times rating of controlling MCB capacity 100 amps rating -01 Set -04 Nos |
| 16 | © Digital voltmeter of range (0-500) volts,flush mounting type of size 100 mm x 100mm (4\\"x4\\") square dial with selector witch-01 Nos (Make:- Legrand /Schneider/L&T) |
| 17 | (d) LED Neon indicator lamp(RYB) with holder ,230/240Volts,AC-01set (set of three) Make:-AE/L&T |
| 18 | OUTGOING:-(a) MCCB , four pole 40-63 Amps,240Volts'C' curve, 10 KA all complete all as specified and as directed-02 Nos |
| 19 | Item No 04 : Supply & fix MCCB 4 pole with extension plate terminals features flat extended copper or brass plates bolted to the btreakers standard connection points complete all as specified and as directed. |
| 20 | Item No 05 : Material and labour for Earthing complete with galvanised steel earth plate electrode 600mmX 600mmX 6mm thick buried directely in ground vertically ( earth pit not less than 2.25 meters deep below ground level) with top edge of plate not less than 1.5 metres below ground level, connected to and including galvanised iron wire 4 mm dia and light grade protection pipe of 15 mm dia from earth electrode up to test point or up to 7.5mtr whichever is less by means of GI bolts, nuts, check nuts and washers all as per electrical plate No 3 of SSR Pt-I and GI watering pipe of 20 mm dia medium grade,GI funnel with wire mesh, |
| 21 | including charcoal, salt packed all around the earth electrode plate in layers, PCC earth pit chamber 1:3:6 type C1, of size 45X 45X 45 CM,RCC cover 1:2:4 type B1 of size 45X45X6 CM, excavation/earth work in any strata and returning filling, removal of surplus soil and testing/test point for required value including removing old item complete all as specified and directed. |
| 22 | Item No 06 : Material and labour for Earthing complete with galvanised steel earth plate electrode 600mmX 600mmX 6mm thick buried directely in ground vertically ( earth pit not less than 2.25 meters deep below ground level) with top edge of plate not less than 1.5 metres below ground level, connected to and including galvanised iron strip |
| 23 | 25x4mm as earthing lead and light grade protection pipe of 15 mm dia from earth electrode up to test point or up to 7.5mtr whichever is less by means of GI bolts, nuts, check nuts and washers all as per electrical plate No 3 of SSR Pt-I and GI watering pipe of 20 mm dia medium grade,GI funnel with wire mesh,including charcoal, salt packed all around the earth electrode plate in layers, PCC earth pit chamber 1:3:6 type C1, of size 45X 45X 45 CM,RCC cover 1:2:4 type B1 of size 45X45X6 CM, excavation/earth work in any strata and returning filling, removal of surplus soil and testing/test point for required value including removing old item complete all as specified and directed. |
| 24 | Item No 07 : S&F Cable junction box made of FRP of size min 210x155x92 mm with 6-32 Amp MCB SPN and Aluminium Bus bar 100 mm x 15 mm x 3 mm set of 4, fixed along the wall/pole complete including mounting arrangements including removing the existing defective looping box all as specified and directed. |
| 25 | Item No 08 : Supply and fix GI pipe Bracket of 1.5 m long and made out of 40 mm dia light grade pipe including MS clamp of size 25 x 4 mm - 02 Nos, nut and bolt with washer duly painted with aluminium paint over one coat of primer of suitable size for fixing of street light complete all as specified and diected. |
| 26 | Item No 09 : Supply and connecting three core cord flexible wire, copper conductor multistranded, PVC insulated and overall PVC sheathed of size 1.5 Sqmm 1100 Volt , draw through LT steel tubular poles for connection to street light from junction box as directed. |
| 27 | Item No 10 : Material and labour for Boaring holes horizontally under road without damaging the surface of road (minimum 1.0 Mtr bellow the road surface) with the help of GI tubing of any dia not exc 80mm dia for passing of UG cable all as specified and as directed. Please Enable Macros to View BoQ information Schedule 'A' Part II (External Electrical Supply) Item Description of Item Unit Rate per unit(Rs.) Qty Amount (Rs.) |
| 28 | M & L for sub main wiring complete with 2 run of 1.5 sqmm single core copper conductor (ISI marked)cable 1100 volts grade, ISI marked,FRLSH type (conforming to IS-694/1990 as amended) PVC insulated, unsheathed,flexible,multi stranded colour coded cables drawn through and including rigid PVC conduit 25 mm dia ISI marked medium grade(MMS) with all connected accessories such as Bend,Tee,Elbow,Short peices etc concealed in wall/roofs/floors and including one run of 1.5 sqmm single core copper conductor cable flexible, PVC insulated, unsheathed, multistranded, 1100 volts grade, ISI marked,FRLSH type as earth continuity conductor connected to common earth dolly and including removing old unsv submain wiring and making good the disturbed surfaces to match with existing surface and colour shade and complete all as specified and directed.Note : - Two run of 1.5 sqmm single core copper conductor cable and one run of 1.5 sqmm single core copper conductor cable as earth continuity and one run of PVC conduit shall be measured as one unit. |
| 29 | Material and labour for PVC insulated,LT armoured electric cable with aluminium standed conductor 1100 volts grade,cross-sectional area 35 sqmm ,3.5 core laid in trenches/pipes/ducts/wall/boarings with necessary cable lugs and glands,nuts,bolts and washers,saddeling on wall properly etc and testing and complete all as specified and directed. |
| 30 | Material and labour for PVC insulated,LT armoured electric cable with aluminium standed conductor 1100 volts grade,cross-sectional area 16 sqmm ,4 core laid in trenches/pipes/ducts/wall/boarings with necessary cable lugs and glands,nuts,bolts and washers,saddeling on wall properly etc and testing and complete all as specified and directed. |
| 31 | Material and labour for PVC insulated,LT armoured electric cable with aluminium standed conductor 1100 volts grade,cross-sectional area 6 sqmm ,2 core laid in trenches/pipes/ducts/wall/boarings with necessary cable lugs and glands,nuts,bolts and washers,saddeling on wall properly etc and testing and complete all as specified and directed. |
| 32 | Supply & fixing , 100 Watt LED flood light fitting with IP65 protection and complete all as specified and directed. |
| 33 | Supply & fixing , 70 Watt street light fitting sensor based with IP65 protection and complete all as specified and directed. |
| 34 | Supply & fix and sheet metal enclosure,AD/DD 240 volts AC,SPN,DB, 8 way, flush mounting with 100amps copper busbar,neutral bar,earth bar and MCB incomer,MCB SPN/DP, and MCB SP as outgoing for IP 43& IP54 DBs protection nd including removing old unserviceable DBs making good the disturbed surfaces to match with existing surface and colour shade acomplete all as specified and as directed. |
| 35 | Supply & fix MCB SP 6 to 32 Amps 10 KA,\\"C\\" series,AC,240Volts,50Hz , ISI marked and complete all as specified and directed. |
| 36 | Supply & fix and MCB SPN 40 to 63 Amps 10 KA,\\"C\\" series,AC,240Volts,50Hz, ISI marked complete all as specified and directed.Make:-Legrand / ABB/Havells |
| 37 | Material & Labour for steel tubular swaged poles complete with cast iron base plate, finial taper plug, bolts, nuts & screws as specified type 410 SP-31 (9.00 meters long) complete all as specified and directed. |
| 38 | Excavation in trenches not exceeding 1.5 mtr wide and n exc 1.5 mtr depth for foundation etc or for shafts, wells, cesspits, manholes,etc in soft loose soil complete all as specified and directed. (for pole) |
| 39 | Excavation in trenches exceeding 1.5 mtr wide and exc 1.5 mtr depth but not exc 3.0 mtr in depth for foundation etc or for shafts, wells, cesspits, manholes,etc in soft loose soil complete all as specified and directed.(for pole) |
| 40 | Material and labour for PCC 1:4:8 type D2 using 40 mm grade aggregate as in foundations,filling, base, sub base, and mass concrete complete all as spfd and directed.(for pole) |
| 41 | Material and labour for PCC 1:2:4 type B2 using 40 mm grade aggregate as in foundations,filling, base, sub base, and mass concrete complete all as spfd and directed.(for pole) |
| 42 | Material and labour for PCC 1:2:4 type B1metalic hardener using 20 mm grade aggregate as in coping, kerbs and like incl weathering slightly rounded or chamfered angles without extra cement for smooth finish as directed by engineer in charge. (for pole) |
| 43 | Returning filling in soil including spreading leveling watering and well rammimg in layer n exc 25 cm complete all as specified and directed. (for pole) |
| 44 | Material & labour for GI pipe 80 mm \\" light grade'' laid in trenches floors/on,pole/road for cable protection with all fittings complete all as specified and directed.Make:-Jindal/Tata/Swastik/BST. |
| 45 | Supply and filling in and speading unwashed river sand for cushioning and covering the under ground cables in trenches and punning to provide required cover complete all as specified in SSR Part-I and as directed. |
| 46 | Excavation in trenches not exceeding 1.5 mtr wide and n exc 1.5 mtr depth for laying of cables, pipe lines, protection pipes and foundations etc and getting out in soft loose soil complete all as specified and directed. |
| 47 | Returning filling in soil including spreading leveling watering and well rammimg in layer n exc 25 cm complete all as specified and directed |
| 48 | Removing excavated soil not exc 50 mtr ant depositing where directed at a level not exc 1.5 mtr above the starting point all as specified and directed |
| 49 | M & L for brick sub class 'B' 250mm x 115mm x 0.75mm and laid in trenches as in protection of UG cable complete all as specified and directed. Total carried over to BOQ Rs. 602117.6 Signature of Contactor DY Dir(Contracts) Date: For Accepting Officer Schedule 'A' Part III (Road Path Culvert) Item Description of Item Unit Rate per unit (Rs.) Qty Amount (Rs.) |
| 50 | Excavation over areas, n exc 1.5m deep & getting out and getting out in Soft/loose soil complete all as specified and directed. |
| 51 | Returning , filling in includiing spreading levelling, watering and well ramming in layers not exceeding 25 cm thick |
| 52 | Removing excavated materials exc.1.50 km but n exc 5 km and depositing were directed complete all as as specifiedand directed |
| 53 | M & L Hardcore of guage n. exc 63mm, deposited, spread and levelled in layers n exc. 15 cm thick, wateredand rolled/rammed to a true surface |
| 54 | M & L Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed |
| 55 | M&L 75mm thick PCC 1:4:8 type 02 (using 40mm graded stone aggregate) as in sub base complete all asspecified and directed |
| 56 | M&L for 50mm thick Sand cushion under floors complete all as specified and as directed. |
| 57 | M&L for Machine pressed precast concrete interlocking paver block 80mm thick any shape and size with grey cement and pigment, confirming to IS 15658-2006 of M 35 Grade complete all as specified and as directed. |
| 58 | M&L PCC 1:2:4 type B-1 (using 20 mm graded stone agg) as in seismic and other similar bands, coping, bed block or similar work including necessary form work complete all as specified. Total carried over to BOQ Rs. 2388508.9 Signature of Contactor DY Dir(Contracts) Date: For Accepting Officer Schedule 'A' Part IV (Area Drainage) Item Description of Item Unit Rate per Unit (Rs.) Qty Amount (Rs.) |
| 59 | Earth work in excavation by mechanical means {Hydraulic excavator)/ in foundation trenches or drains. {not exceeding 1.5 m in width or 10 sqm on plan), induding dressing of sides and ramming of bottoms, lift upto 1.5 m including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. |
| 60 | M&L for PCC 1:3:6 Type C2 (40mm graded aggregate) as in foundation. |
| 61 | 3 Material and labour for Screed bed or bedding layer of mortar 20 mm thick in CM 1:6 for bedding below precast RCC drain as shown in drawing complete all as specified and as directed. |
| 62 | Returning, filling in (excavated soil) including spreading, leveling, watering and well ramming in layers not exceeding 25 cm thick complete |
| 63 | Removal excavated material {soil) to a distance exc 250 m but n.exc 500 m and depositing where directed at a level n.exc 1.5m above the starting point apporoved earth completed all as directed. Total carried over to BOQ Rs. 167188.43 Signature of Contactor DY Dir(Contracts) Date: For Accepting Officer Schedule 'A' Part-V (SITE CLEARANCE) Item Description of Item Unit Rate (Rs.) Qty Amount (Rs.) |
| 64 | Site clerance work including cleaning of shrubs , vegitation , bush , weeds , trees and saplings not exceeding 30 cm in girth (measured at a height of 1m above GL) and useless material disposed off upto a distance of 50 m outside the periphery of area completed all as specified and directed. |
| 65 | M & L Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering Total carried over to BOQ Rs. 235990.0 Signature of Contactor Dy Dir /AD (Contracts) Date: For Accepting Officer |
AI Tender Summary
Tender Timeline
Sep 17, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 22, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 29 daysOct 29, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 36 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender