Tender For Providing Public Health Services For Renovation Of Kitchen, Bath & Toilets At House No.1613 B (Type-Iii) Under Gmch Residential Complex, Gate No.8, Sector-32, Chandigarh.
Tender Value
2.89 Lakhs
Estimated cost
Bid Submission
23 Sep 2026
0 days left
EMD
5800
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Chandigarh → Chandigarh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Providing Public Health Services For Renovation Of Kitchen, Bath & Toilets At House No.1613 B (Type-Iii) Under Gmch Residential Complex, Gate No.8, Sector-32, Chandigarh.
BOQ
| Sl. No. | Item Description |
| 1 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : |
| 2 | 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 3 | 1:5:10 (1 cement : 5 coarse sand (zone-III) derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources) |
| 4 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). |
| 5 | Centering and shuttering including strutting, propping etc. and removal of form for : |
| 6 | Shelves (Cast in situ) |
| 7 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. |
| 8 | Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 9 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : |
| 10 | Cement mortar 1:4 (1 cement : 4 coarse sand) |
| 11 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. |
| 12 | Cement mortar 1:3 (1 cement :3 coarse sand) |
| 13 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. |
| 14 | Granite stone slab colour black, Cherry/Ruby red |
| 15 | Area of slab over 0.50 sqm |
| 16 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. (Size 300 x 600 mm) |
| 17 | Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge: |
| 18 | Profile B |
| 19 | Fixing with adjustable lugs with split end tail to each jamb |
| 20 | Profile E |
| 21 | Fixing with adjustable lugs with split end tail to each jamb |
| 22 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete. |
| 23 | 12 mm cement plaster of mix : |
| 24 | 1:4 (1 cement: 4 coarse sand) |
| 25 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : |
| 26 | Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture |
| 27 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 28 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound ) content less than 50 gram/ litre, of approved brand and manufacturer including applying additional coats wherever required to achieve even shade and colour |
| 29 | Old work (one or more coats) |
| 30 | Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete |
| 31 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. |
| 32 | Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) |
| 33 | Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix) |
| 34 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : |
| 35 | Of area 3 sq. metres and below |
| 36 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. |
| 37 | For thickness of tiles 10 mm to 25 mm |
| 38 | Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. |
| 39 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. |
| 40 | Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I.brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : |
| 41 | W.C. pan with ISI marked white solid plastic seat and lid |
| 42 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: |
| 43 | White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps |
| 44 | Providing and fixing Stainless Steel A ISi 304 (18/8) kitchen sink as per IS: 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : |
| 45 | Kitchen sink without drain board |
| 46 | 610x460 mm bowl depth 200 mm |
| 47 | Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge. |
| 48 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. |
| 49 | Flexible pipe |
| 50 | 32 mm dia |
| 51 | Providing and fixing soil, waste and vent pipes : |
| 52 | 100 mm dia. |
| 53 | Centrifugally cast (spun) iron socket & spigot (S&S) pipe as per IS: 3989 |
| 54 | 75 mm diameter : |
| 55 | Centrifugally cast (spun) iron socketed pipe as per IS: 3989 |
| 56 | Providing and fixing heel rest sanitary bend |
| 57 | 100 mm dia |
| 58 | Sand cast iron S&S as per IS - 3989 |
| 59 | Providing and fixing terminal guard : |
| 60 | 100 mm |
| 61 | Sand cast iron S&S as per IS - 3989 |
| 62 | 75 mm |
| 63 | Sand cast iron S&S as per IS - 3989 |
| 64 | Providing and fixing collar: |
| 65 | 100 mm |
| 66 | Sand cast iron S&S as per IS - 3989 |
| 67 | 75 mm |
| 68 | Sand cast iron S&S as per IS - 3989 |
| 69 | Providing lead caulked joints to sand cast iron/centrifugally cast (spun) iron pipes and fittings of diameter : |
| 70 | 100 mm |
| 71 | 75 mm |
| 72 | Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors : |
| 73 | 100 mm inlet and 75 mm outlet |
| 74 | Sand cast iron S&S as per IS - 3989 |
| 75 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. |
| 76 | Internal work - Exposed on wall |
| 77 | 20 mm dia nominal bore |
| 78 | Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, i/c making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall : |
| 79 | 15 mm dia nominal bore |
| 80 | 20 mm dia nominal bore |
| 81 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : |
| 82 | 20 mm nominal bore |
| 83 | Providing and fixing uplasticised PVC connection pipe with brass unions : |
| 84 | 45 cm length |
| 85 | 15 mm nominal bore |
| 86 | Painting G.I. pipes and fittings with synthetic enamel white paint with two coats over a ready mixed priming coat, both of approved quality for new work : |
| 87 | 20 mm diameter pipe |
| 88 | Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) |
| 89 | 15 mm nominal bore |
| 90 | 20 mm nominal bore |
| 91 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 92 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : |
| 93 | 15 mm nominal bore |
| 94 | Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. |
| 95 | 15 mm nominal bore |
| 96 | Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. |
| 97 | 15 mm nominal bore |
| 98 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 |
| 99 | 15mm nominal bore |
| 100 | Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge. |
| 101 | Cutting holes up to 30x30 cm in walls including making good the same: |
| 102 | With common burnt clay F.P.S. (non modular) bricks |
| 103 | Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including finishing complete so as to make it leak proof. |
| 104 | Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : |
| 105 | First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours. |
| 106 | Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours |
| 107 | The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry. |
| 108 | Dismantling of C.I Pipes upto 150 mm dia and taking out the pipes, manually or mechanical means including stacking of pipes with in 50 metres lead and reconditioning the surface as per direction of Engineer-in-charge as per requirement. |
| 109 | Dismantling of G.I. Pipes upto 50 mm dia and taking out the pipes, manually or mechanical means including stacking of pipes with in 50 metres lead and reconditioning the surface as per direction of Engineer-in-charge as per requirement. |
| 110 | Providing and Fixing of looking glass mirror 5mm thick of approved make with PVC Beading 1-1/2\\" x 3/4\\" with plastic hard board duly fixed on wall with screw/nuts/clips/rod plug etc complete in all respect to the satisfaction of EIC. |
| 111 | Providing and Fixing of C.P. Brass Towel Rail 600mm long of approved make complete as per EIC etc complete in all respect at site. (As decided by the EIC) |
| 112 | Providing and fixing of C.P. brass Soap dish complete in all respects of approved make complete cost with all taxes & labour charges etc. (As desired by EIC) |
| 113 | Providing and fixing of C.P. Brass Over Head Shower round shape 100 mm dia of approved make Round Shape SINGLE FLOW (ABS Body Chrome plated with Gray Face Plate)with RCS or equivalent complete in all respects. (As decided by the EIC) |
| 114 | Providing and fixing of C.P. Brass Shower Arm casted 190 mm long round/square Shape of approved make for wall mounted showers with Wall Flange complete in all respects. (As decided by the EIC) |
| 115 | Providing and fixing in position best indian Make C.P.Cup heavy Duty Complete in all respects.(minimum weight 15gm) complete in all respects. (As desired by EIC) |
| 116 | Providing and fixing gun metal peet valve, ISI marked for pressure not less than 3kg/cm2 complete in all respects. (As desired by EIC) |
| 117 | 20 mm nominal bore |
| 118 | Removing of Cinder from depressed portion of toilet and refilling the same after drying complete in all respects to the entire satisfaction of Engineer-in-Charge. |
| 119 | Providing and filling Dry Brick blast (32mm to 50mm size) in depressed portion complete in all respect. |
| 120 | Providing and Fixing of 30mm thick Golden Champ Wood (Klin seasoned) glazed window shutters consisting of vertical and horizontal styles 75x35mm size with 4mm thick floated glass panes fixed with 1/2\\" x 3/4\\" Golden Champ Wood (Klin seasoned) beading. The rate further includes the cost of 2 Nos. 3\\" M.S. Hinges, 2 Nos. M.S. Tower Bolts 4\\", 5\\" M.S. Handles, I-Hook and two coats of special quaility enamel paint ove coat of primer after preparation of surface (Special quality) complete in all respects to the entire satisfaction of engineer-in-charge. |
| 121 | Dismantling of Ceramic tiles or Vitrified and Plaster to making the surface clean for refixing the glazed tiles including removing of malba complete in all respect and to the entire satisfaction of EIC. |
| 122 | Providing and Fixing 30mm thick golden champ wood (Kiln seasoned) glazed door shutters consisting of sides and top rail 100x30mm size, bottom rail of 200 x 30 mm size and locking rail of 150 x 30 mm size with 12mm thick particle board fixed with 1/2\\" x 3/4\\" golden champ wood (kiln seasoned) beading. The rate further includes the cost of tower bolt, handle and special quality enamel paint over coat of primer after preparation of surface (Special Quality) complete in all respects to the entire satisfaction of EIC. |
| 123 | Providing and Fixing of G.I. Tank Nipple complete in all respect. |
| 124 | 20 mm Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 17, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 23, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodaySep 24, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 1 dayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender