Tender For Special Repair To Bldg No T-23 At 525 Asc Bn, Special Repair Of 07 Toilet Blocks At Dalogra & Provn Of 01 X 03 Phase 15 Kva Dg Set At Cbs Sarol Of Ge 862 Ews
Tender Value
32.99 Lakhs
Estimated cost
Bid Submission
16 Oct 2026
0 days left
EMD
66000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Rajouri → Jammu and Kashmir
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repair To Bldg No T-23 At 525 Asc Bn, Special Repair Of 07 Toilet Blocks At Dalogra & Provn Of 01 X 03 Phase 15 Kva Dg Set At Cbs Sarol Of Ge 862 Ews
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 09-Oct-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 16-Oct-2026 |
| 2 | 28-Sep-2026 | Corrigendum1 | BOQ | 09-Oct-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Sch 'A' Part-I (B&R works):-Demolition of cement concrete (unreinforced) in ground floors and paving not exceeding 15 cm the (below or above ground level) complete all as specified and directed. |
| 2 | Demolition of brick/ stone work built in cement morter of any descrption including all necessary quions arches piilars etc complete all as specified and directed. |
| 3 | Dismantling of wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards/ slabs/ blankets, any thickness, including cover fillets complete all as specified and directed. |
| 4 | Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including, Nainital or similar pattern roof coverings complete all as specified and directed. |
| 5 | Dismantling of structural steel work including frames, gates, framed truss etc complete all as specified and directed. |
| 6 | Taking down cement plaster on brick/ stone or concrete surfaces including racking out joints hacking for key to any thickness scrubbing down with water etc complete all as specified and directed. |
| 7 | Taking down chowkhats with shutter (without taking off from shutter) exceeding 1.5 sqm and not exceeding 4 sqm each and removing to store and making good to surface disturbed due taking down, complete all as specified and directed. |
| 8 | Taking down chowkhats with shutter (without taking off from shutter) not exceeding 1.5 sqm each and removing to store complete all as specified and directed. |
| 9 | Taking down GI tubing of 15 mm dia and connection and including cleaning for refixing or removel complete all as specified and directed. |
| 10 | Taking down GI tubing of 20 mm dia and connection and including cleaning for refixing or removel complete all as specified and directed. |
| 11 | M&L for brick work in cement mortar (1:6) using old size sub class 'B' bricks in walling, straight or curved on plain exceeding 6m mean radius complete all as specified and directed. |
| 12 | M&L for 10 mm thick rendering in cement mortar (1:6) on fair faces of brick/ concrete surfaces of walls, finished even & smooth without using extra cement complete all as specified and directed. |
| 13 | M&L for 15 mm thick rendering on fair faces of brick/ concrete surfaces in cement mortar 1:4 and finished even and smooth without using extra cement complete all as specified and directed. |
| 14 | M&L for providing and injecting along the external wall below concrete or masonary apron using post antitermite treatment chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc in apron, complete all as specified and directed.Note: The treatment work shall be carried through authorised agency only, and certificate for the same for warranty shall have to furnished before submitting payment. |
| 15 | M&L for cement concrete type C-2, 1:3:6 (using 40mm graded stone aggregate) 75 mm thick as in plinth protection laid in slope 1:12 from outer edge of the wall finished even and fair, laid in alternate bays including providing 6 mm wide joints through out the thickness of plinth protection in concrete bays and in between walling and plinth protection, joint filled mastic filling comprising of one part of heated bituminous 85/25 and 3 parts of sand (all by weight) complete all as specified and directed. |
| 16 | M&L for glazed ceramic coloured tiles of size 450 x 300 x 7mm thick, (premium quality) on vertical surface of wall such as dado, skirting, riser etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, laid over and including 10mm thick rendering in cement mortar 1:3, after dismantling old unserviceable of tiles and screed bed, complete all as specified and directed. |
| 17 | M&L for non skid ceramic coloured tiles size 400 x 400 x 7 to 8 mm thick , as in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, laid over and including 15mm thick screed bed in cement mortar 1:4, after dismantling old unserviceable of tiles, complete all as specified and directed. |
| 18 | S&F steel ventilator with top hung shutter with glazed bars including hinges, steel peg stay, complete all as specified and directed. |
| 19 | S&F sheet glass ordinary quality 5.0 mm thick type fixed to aluminium doors, windows & partitions in squares exceeding 0.5 sqm in each pane complete all as specified and as directed. |
| 20 | S&F galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperature 1.18 mm and fixed with tinned tacks of galvanised wire staples complete all as specified and as directed. |
| 21 | M&L for factory made 100% Solid WPC Door Frame 90mm x 45mm Single Rebated made from Wood Polymer Composite (Single Extruded Section Process) Material comparising of virgin PVC polymer of K value 57-60 (Suspension Grade), Calcium Carbonate and Natural Fibres (Wood Powder/ Rice Husk/ Wheat husk) and Non toxic additive fabricated with frame density of 780 Kg/cbm & manufactured by \\"RAJSHRI\\" an ISO 9001-2015 Certified Company, having good screw holding capacity (Screw Withdrawl Strength of Min 900N), Minium Compressive Strength of 58 N/mm2, Modulus of elasticity 900N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof, water/ moisture proof & Fire retardant & Fixed in position with SS Dash Fasteners/ Hold Fast of required dia and length, all as per specifications drawings as directed by the Engineer-In-Charge. Material test certificate and authentication should be compulsory provided by the manufacturing company complete all as specified and directed. |
| 22 | S&F Factory Made Solid PVC Moulded Door Shutter,with particle board core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site complete all as specified and as directed. |
| 23 | Supply & laying of CPVC pipes 16 mm Outer dia, SDR 11 & Plain CPVC SDR 11 fitting on wall/ceiling or laying in floors incl taking down all necessary plain/brass fitting and cutting chasing, pinning and making good disturbed surface complete all as specified and directed. |
| 24 | Supply & laying of CPVC pipes 22.20 mm Outer dia, SDR 11 & Plain CPVC SDR 11 fitting on wall/ ceiling or laying in floors incl taking down all necessary plain/brass fitting and cutting chasing, pinning and making good disturbed surface complete all as specified and directed. |
| 25 | S&F in repair stop valve cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed for 15mm dia pipe, complete all as specified and as directed. |
| 26 | S&F in repair 15 mm dia bib tap cast short body copper alloy, chromium plated, with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule complete all as specified and directed. |
| 27 | S&F in repair Swan neck CP brass Pillar Cock , 15mm bore, cast copper alloy, with capstan heads, chromium plated,fancy type, screwed down high pressure, with or without lettered ‘Hot' or ‘Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed, complete all as specified and directed. |
| 28 | S&F in repair for vitreous china wash down water closet pan, white (pedestal pattern), including plastic water closet seat, black/white, closed pattern with recessed bottom and cover and mild steel chromium plated or aluminised hinging device, excluding fixing bolts, flushing cistern and flush pipe complete all as specified and directed. |
| 29 | S&F in repair copper alloy chromium plated jet spray suitable for padestal pattern WCs including decorative choice flexible pipe fixed to iron pipe with and including cover platecomplete all as specified and as directed. |
| 30 | S&F in repairs vitreous china squatting pan, orissa pattern size 580 x 440 mm white/colour with integral foot rest (excluding flushing cistern and flush pipe) including provison of lime concrete complete all as specified and as directed. |
| 31 | S&F in repair for 10 ltrs capacity (PVC), valve less, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, complete all as specified and directed. |
| 32 | S&F in repairs viterous China wash basin with pedestal, white flat back, size 550x400mm excluding taps, waste chain and plug and porcelan stopper but including brackets complete all as specified and as directed. |
| 33 | M&L in repairs for 15 mm dia fancy type Chromium plated angle valves, cast copper alloy screwed down high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. |
| 34 | M&L in repairs 15 mm dia 2 in 1 Fancy type Chromium plated Angle valves, cast copper alloy screwed down high pressure, with crutch or butterfl y handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. |
| 35 | S&F in repair PVC connection 15 mm x 450 mm including brass check nut at both ends screwed for iron pipe of 15 mm bore complete all as specified and directed. |
| 36 | M&L in repair for 75 mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed. |
| 37 | S&F in repair PVC SWR pipes 75 mm bore single socketed in any length with rubber ring joint fixed to or laid in trenches or in floors with steel clamps complete all as specified and directed . |
| 38 | M&L for 110 mm PVC (SWR) P trap, plain with grating including jointing with solvent cement complete all as specified and directed. |
| 39 | S&F in repair PVC SWR pipes 110 mm bore single socketed in any length with rubber ring joint fixed to or laid in trenches or in floors with steel clamps complete all as specified and directed. |
| 40 | S&F in repair 110 mm bore PVC (SWR) bend/ Tee any radius complete all as specified and directed. |
| 41 | S&F in repair SS grating of 100 mm dia, complete all as specified and directed. |
| 42 | S&F in repair of 600mm x 450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed |
| 43 | S&F in repair of sheet glass shelf assembly consisting of 5.5mm thick and 12cm wide sheet glass shelf, with chromium plated bracket guard and railing 60cm long complete all as specified and directed. |
| 44 | S&F in repair for brass CP soap dish incl brass Cp screws and wooden cleats complete all as specified and directed. |
| 45 | M&L for preparation of new plastered surfaces of walls and applying two coats of distemper oil emulsion over one coat of wall care putty complete all as specified and directed. |
| 46 | M&L for preparation of new plastered wall surface including cornices etc and applying two coats of exterior emulsion weather coat paint (multi colour pattern as approved by GE) of apex ultima of ASIAN or equivelent over and including a coat of primer complete all as specified and directed. |
| 47 | M&L for providing & fixing of 4mm thick designer ceiling board in ceiling fixed with screw as per manufactures instructions, laid on hot dipped galvanized iron imposed grid with 24mm wide T-section exposed flanges which shall be white powder coated. The frame work shall comprise of main runner made from 0.33mm thick galvanized steel sheet & of size 24 x 32 x 300mm and spaced at 12mm centres securely fixed to the structural soffits by approved hangers at 1200mm maximum centres. Hangers of GI wire 4mm dia to be fixed by approved rowl plug, level adjusters and screws etc. The last hanger at the end of each main runner shall not be greater than 450mm from adjacent wall flush fitting of 1200 long cross tee with (double stitching) to be inter locked between main runners at 600mm centre to from 1200 x 600mm modules cross tee longer than 600mm modules to be formed by fitting 600mm long cross tee, tee perimeter wall angle shall be of 0.45mm thick galvanized steel of size 19x19mm and 300mm long of white colour all as per instruction complete all as specified and directed. |
| 48 | S&F rotational moulded polythylene three layered white colour water storage tank with float valve, plastic lid cover, two-layered, cylindrical vertical with closed top, hoisted and fixed in position of capacity 1000 ltrs tank and making connections inlcuding suitable GI wash out, over flow, nipple and 20mm bore ball brass valve with union screwed for iron pipe and fixed including dismantling of old unserviceable tank, complete all as specifed and directed. |
| 49 | S&F of pre- painted galvalume aluminum zinc coating GI based semi corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 50 | M&L for MS rolled sections as in main and cross beams/columns, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors, fixed with angle cleats or other connecting plates.(Fe-410 W Gde E-250 Quality A) complete all as specified and directed. |
| 51 | S&F on site LLDPE septic tank designed to carry sewage and sullage water, excn in any type of soil, PCC 1:4:8 type D-2 below fdn, vent shaft connection etc complete for 20 users capacity complete all as specified and directed. |
| 52 | S&F on site LLDPE septic tank designed to carry sewage and sullage water, excn in any type of soil, PCC 1:4:8 type D-2 below fdn, vent shaft connection etc complete for 10 users capacity complete all as specified and directed. |
| 53 | M&L for soakage wells excavation, in any type of soil, foundation in PCC 1:3:6, walls of honey combed masonry with top ring of RCC-1:2:4 concrete incl intercepting chamber and screen chamber made of brick masonry in CM, RCC cover slab in RCC/ SFRC cover, interconnecting pipes of RCC/ DWC complete filled with bricks bats of size 1.8 M dia x 3 mtr effective depth complete all as specified and directed. |
| 54 | Demolition and breaking up existing sewage (SGSW/ AC pipes and the like, 200mm bore set in cement morter and removing demolised material to a distance exceeding 50m and not exceeding 100m complete all as specified and directed. |
| 55 | M&L for concrete bed PCC 1:3:6 type C-2 (using 40mm graded stone aggregate) to RCC/ SGSW pipe 200 mm bore including packing under and haunching against the sides of pipes after they are laid and tested including removal of debris outside MD land complete all as specified and directed. |
| 56 | Supply and laying reinforced concrete pipes bore of pipe in 200 mm dia, class NP2, laid and jointed complete with collars complete all as specified and directed |
| 57 | M&L for coloured, pre-polished, premium quality factory made, chamfered edge machine pressed precast concrete interlocking paver block of any shape and size confirming to (IS:15658-2006) of 40mm thick, M-30 grade single layer monolithic high density manufactured by electro vibro hydraulically operated block making machine in equal proportion of grey and coloured tile to make a pattern as directed as in hardstanding/ path, with grey cement, laid tightly over & including 25mm thick dry sand cushion (compacted) and joints filled with dry sand, colour and pattern and dismantling old existing any description and size paver block, complete all as specified and directed. |
| 58 | M&L for 100mm thick plain cement concrete 1:4:8, type D-2 (using 40mm graded stone aggregate) as in sub base of floor, paving etc, finished the surface even and fair without using extra cement, complete all as specified and directed. |
| 59 | M&L for plain cement concrete 1:2:4, type B-2 (using 40mm graded stone aggregate) as in foundation filling, complete all as specified and directed. |
| 60 | S&F compound girders and stanchions, lattice girders, aerial masts, staging for water tanks and the like including caps, bases, splices etc. built up from two or more beam or channel sections or angles with plates, including all lattice bars, stiffeners, gusset plates, etc. complete all as specified and directed. |
| 61 | M&L for factory made pre cast cement concrete cover of Nominal Mix type A2 1:1.5:3 grade cement concrete (using 20mm graded stone aggregate) of size & thickness as directed by Engr-in-charge jointed with cement morter 1:3 (1 cement: 3 aggregate) wherever required complete all as specified and directed. |
| 62 | M&L for vetrified coloured tiles 8 to10 mm thick size 600 x 600mm, as in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, laid over and including 15mm thick screed bed in cement mortar 1:4, after dismantling old unserviceable tiles, complete all as specified and directed. |
| 63 | All as per item No 62.00 here-in before but in skirting over and including 10 mm thick rendering in cm (1:4). Please Enable Macros to View BoQ information |
| 64 | All as per item No 62.00 here-in before but in skirting over and including 10 mm thick rendering in cm (1:4). Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 09, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Oct 16, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Today
Oct 09, 2026
18:00 IST
Corrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
CompletedOct 16, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodayOct 19, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender