Tender For Special Repair To Bldg No P-349 Cook House Of 21 Jak Rif Under Ge (West) Jalandhar Cantt
Tender Value
41.93 Lakhs
Estimated cost
Bid Submission
06 Oct 2026
3 days left
EMD
83860
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jalandhar → Punjab
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repair To Bldg No P-349 Cook House Of 21 Jak Rif Under Ge (West) Jalandhar Cantt
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of PCC in Ground floors/PCC Path/Plinth Protection and paving not exceeding 15cm thickness (below or above ground level) etc. Complete all as specified and directed. |
| 2 | M&L for 75mm thick cement concrete type C-2, 1:3:6 (40mm graded stone aggregate) as in plinth protection finished even and smooth (without using extra cement), complete all as specified and directed. |
| 3 | Demolition of brick work or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc., but excluding ashlar facings, dressed stonework and precast concrete articles, complete all as specified and directed. |
| 4 | M&L for Brickwork with subclass 'B' bricks, straight or curved on plan exceeding 6m mean radius built in cement mortar 1:6, complete all as specified and directed. |
| 5 | All as per item No 04 above but except bricks etc. Complete all as specified and directed. |
| 6 | Brick work with sub class 'B' bricks straight or curved on plan to any radious in half brick thick walls in CM 1:4 complete all as specified. |
| 7 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed. |
| 8 | M&L for 20 to 25 mm thick machine cut kota stone slab on floor, step etc over and incl 20 mm thick bedding layer CM 1:6 in roughening of old concrete floor surfaces by picking, sweeping clean and washing down with water to remove dust including brushing neat cement slurry with 3kg/sqm with pigments to polished, complete all as specified and directed. |
| 9 | M&L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like over and including cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, complete all as specified and directed. |
| 10 | M&L for joint free non-skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in cement mortar 1:6. Complete all as specified and directed. |
| 11 | All as per ser item No. 10 above but as in skirting over and ncluding 10mm thick cement plaster in CM 1:4, set and jointed in neat cement slurry and pointed in white or colour cement to match. Complete all as specified and directed. |
| 12 | M&L for non skid joint free ceramic coloured tiles of size exc 0.18 Sqm and not exc 0.38 Sqm, 7-8 mm thick in floor set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and including screed bed or bedding layer of mortar 15 mm thick in cement mortar 1:6 for laying floor finishes. Complete all as specified and directed. |
| 13 | M&L for coloured glazed ceramic tiles in vertical surface 450x300x7 mm thick laid over and including 10mm thick cement plaster in CM 1:4, set and jointed in neat cement slurry and pointed in white or colour cement to match Complete all as specified and directed. |
| 14 | Taking down cement or cement lime plaster, any description on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water, etc. Complete all as specified and directed. |
| 15 | M&L for rendering 15mm thick on fair faces of brick or concrete surfaces in Sqm cement mortar 1:6 on walls, finished even and smooth without using extra cement, complete all as specified and directed. |
| 16 | M&L for rendering 15mm thick on fair faces of brick or concrete surfaces in cement mortar 1:4 on walls, finished fair and even, complete all as specified and directed. |
| 17 | M&L for 5mm thick Rendering in CM 1:3 on brick work or concrete surfaces on ceiling finished even and smooth without using extra cement etc. Complete all as specified and directed. |
| 18 | M&L for preparation of new plastered surfaces and distempering walls with two coats of distemper oil emulsion, white or tinted over and including 1mm thick wall care putty including primer, complete all as specified and directed. |
| 19 | M&L for preparation of new plastered surfaces and applying two coats of cement base paint over and including a coat of primer, complete all as specified and directed. |
| 20 | M&L for preparation of newly plastered surfaces and applying three coats of White Wash on ceiling etc. Complete all as specified and directed. |
| 21 | M&L for prepration of old surfaces of ceiling and applying two coat of white (lime) wash on ceiling. Complete all as specified and directed. |
| 22 | M&L for prepration of old decorated surfaces of walls, washing rubbing down and stooping of distempered and painted surfaces and applying two coat of oil bound distemper. Complete all as specified and directed. |
| 23 | M&L for complete removal of existing treatments by washing, rubbing down and stopping etc on wall surfaces and applied two coat of cement base paint over and including one coat of primer. Complete all as specified and directed. |
| 24 | S&F in repair vitreous china wash down water closet, \\"Orissa pattern, size, 580x440mm white, with integral foot rest (excluding flushing cistern and flush pipe) but including provision of cement concrete bedding. Complete all as specified and directed. |
| 25 | S&F medium grade steel water tubing, 15 mm bore galvanised with all fittings and fixed complete to walls or layed in floors including taking down of existing tubing and connections. Complete all as specified and directed. |
| 26 | S&F medium grade steel water tubing, 20 mm bore galvanised with all fittings and fixed complete to walls or layed in floors including taking down of existing tubing and connections. Complete all as specified and directed. |
| 27 | M&L for Cutting chases, pinning in brick wall making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc. and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth. Complete all as specified and directed. |
| 28 | S&F PVC connection 15mm size with PTMT nuts of length 450mm etc. Complete all as specified and directed. |
| 29 | S&F in repair Low Level Flushing cistern PVC valveless syphonic action type, 10 Itrs capacity including supply pipe & fixing brackets of M.S. angle on walls etc. Complete all as specified and directed. |
| 30 | S&F Flush pipe of polyethylene of low or high denisty or PVC 32 mm Dia for |
| 31 | S&F in repairs waste coupling of PTMT (half or full threaded). (Minimum weight 32mm-45gm/40mm-60gms). Complete all as specified and directed. |
| 32 | S&F in repair fancy type, brass chromium Plated stop valves/Angle valves, cast copper alloy, bore dia of pipe in 15mm, screwed down, high pressure, with crutch or but-terfly handle, screwed both ends for iron pipe and fixed. Complete all as specified and directed. |
| 33 | S&F in repair sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm. Complete all as specified and directed by Engineer-In- |
| 34 | M&L for chromium plated long body bib tap cast copper alloy with crutch or Each butter fly handle screwed down screwed for iron pipe and fixed to 15mm bore pipe fixed as in repairs including taking down old tap of any description. Complete all as specified and directed. |
| 35 | S&F in repair Vitreous China Wash Basin with full pedestal, white, flat back, size 550x400mm including brackets, cutting for and pinning in ends of brackets or eracting stand & waste pipe, coupling etc. Complete all as specified and directed. |
| 36 | S&F in repair 15mm dia fancy type Pillar taps, cast copper alloy with capstan heads Chromium Plated, screwed down high pressure, with or without lettered with long screwed shanks and fly-nuts, screwed for iron pipe but fancy type etc. Complete all as specified and directed. |
| 37 | S&F 600mmx450mm Bevelled Edge Mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washters etc. Complete all as specified and directed. |
| 38 | Dismantling PVC water tank of capacity 500 Ltr and S&F new rotational moulded polyethylene water storage tanks 500 ltr capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified including 20mm dia Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed, complete all as specified and |
| 39 | Dismantling PVC water tank of capacity 1000 Ltr and S&F new rotational moulded polyethylene water storage tanks 1000 Itr capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified including 20mm dia Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed, complete all as specified and directed. |
| 40 | S&F in repair 20mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed, complete all as specified and directed. |
| 41 | Taking down chowkats or frame not exc. 1.5 sq m each with shutters (without taking off shutters from the fames) |
| 42 | Taking down chowkats or frame exc. 1.5 sq m but not exceeding 4 sq m each with shutters (without taking off shutters from the fames). Complete all as specified and directed. |
| 43 | Supplying and fixing steel windows 1.25 mm thick Box type (primer coated) ERW hollow 'P' section of size 60 mm. x 25 mm single rebated comprises of glazed sutter EWR sec 50 mm x 20 mm and 1 mm thick and two openable leaf conisting two Nos sash bar of 'T' section 20 mm x 3 mm complete welded to frame with one vertical mullion of EWR bot 'T' section of size 60 mm x 25 mm and 1.25 mm thick including cuttings holes and making good dismantled portion in PCC (1:2:4) type B1, four Nos for each window including following fittings welded to failed shutter:-(b) Handle of Z sec 20 mm x 25 mm, 100 mm long-1 nos per leaf.(c) MS tower bolt 150 mm long 2 Nos per leaf(d) 'Z' sec 20 mm x 25 mm, 100 long stopper-01 Nos per leaf,(e) Cleat 55mm long of hollow square 15 mm x 20 mm x 63 mm welded tohinges-1 Nos per leaf(f) MS pintal hinges of size 75 mm x 12 mm-2 Nos per leaf. (g) fabriction and fixing arrangement complete.Note:- Grill/guard war, glass pane shall be measured and Paid saperately. |
| 44 | All as per serial item No. 43 above but in gauged shutters without sash bars. Complete all as specified and directed. |
| 45 | S&F Steel ventilator, fixed type with glazing bars. Complete all as specified and directed. |
| 46 | S&F framed work such as grills, gratings, etc with ends of bars shouldered and/or riveted, or forget into spikes, framed guard bars barallel iron doors and similar work conforming to Fe 290.Gde-E-165. Complete all as specified |
| 47 | S&F structural steel framed work as in doors frame or gates, hold fast etc. of angle or other section with gusset plates, rails, braces etc. Cutting, drilling and welding complete, drilled for fixing of steel sheeting or other covering. Doors etc, to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging also fastening and fixing. Complete all as specified and directed. |
| 48 | Dismantling structural steel work including doors, gates, flats and MS round bars but excluding framed truss etc. Complete all as specified and directed. |
| 49 | S&F mild steel black sheet 1.25mm thick in wall cladding welded steel gates and similar work including round headed screws clout nails or rivet and fixed wood or steel framing with plain 40mm lap joints or weled including bending or tuming up mitred angles etc as required. Complete all as specified and directed. |
| 50 | M&L for prepration of new steel surfaces of any description not otherwise described over 10 cm width or grith and applying two coat of synthetic enamel paint over one coat of red oxide complete all as specified and directed. |
| 51 | S&F factory made plain, framed, 35 mm thick 2nd class HW panneled shutters (any number of pannels), with pannels of timber flat on both sides (feather edged), or of veneered particle board medium denisty, wood particle board with commercial face veneers; supplied and fixed to chowkhats. Complete all as specified and directed. |
| 52 | S&F factory made 2nd Class Hardwood 35 mm thick glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc., sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats. Complete all as specified and directed. |
| 53 | S&F PVC solid door frame of size 50mm x 47mm made out of 5 mm plain/colour PVC sheet to be matched with shutter, reinforced with MS square tube, as per specification and drawing in SSR Part-II. Complete all as specified and directed. |
| 54 | S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and palin colour PVC sheet for top rail lock rail & bottom rail on either side and as gap insert for top rail bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement in the frame at site as per specification & drawing Complete all as specified and directed. |
| 55 | Dismantling boarding, any description, fixed in any position with nails. Complete all as specified and directed. |
| 56 | M&L for PVC 19/20mm cupboard shutter one side with decorative choice lamination and other side balancing white lamination, fixed with screws to timber framed work including fixing arrangement. Complete all as specified and directed. |
| 57 | M&L for 3.00 mm thick glass sheet, ordinary quality and glazing with oil putty in square not exceeding 0.5 sq. m in each pane. Complete all as specified and directed. |
| 58 | S&F galvanized mild steel wire cloth 0.56 mm nominal dia and average width of aperture 1.18 mm and fixed with tinned tacks. Complete all as specified and directed. |
| 59 | M&L for preparation of new wood surfaces of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over and including a coat of pink primer, complete all as specified and directed. |
| 60 | S&F Butt hinges 100mm, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21. Complete all as specified and directed. |
| 61 | S&F Aluminium handles 125mm, cast type, annodised all as specified and as directed. Complete all as specified and directed. |
| 62 | S&F aluminium anodised 200mm, barrel tower bolts of extruded section and fixed. Complete all as specified and directed. |
| 63 | S&F aluminium anodised 100mm, barrel tower boits of extruded section and fixed. Complete all as specified and directed. |
| 64 | S&F 100mm aluminium anodised Hasp and staple, safety type, with mild steel hinge pin including bolt to hinge plate and fixed with screws. Complete all as specified and directed. |
| 65 | S&F 300mm, Mild steel ordinary rat tail rod pattern springs including roller and roller plate complete add fixed in repairs. Complete all as specified and directed. |
| 66 | S&F Aluminium alloy annodised sliding door bolt with hasp staple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed. Complete all as specified and directed. |
| 67 | S&F mild steel continuous (piano) hinges, 40 width of flaps (when open), bright finish or electrogalvanised. Complete all as specified and directed. |
| 68 | S&F in repair for stainless steel pipe 25 mm dia fancy typ curtain road fixed in the bracket and fancy type finials/side brackets (both side), shade as approved by GE all as specified. |
| 69 | Dismantling of brick tiles single layer as in roof covering. Complete all as specified and directed. |
| 70 | Demolition of mud in roofs any thickness including plastering and leeping(whether full thickness removed or only a part thereof) removing surplus spoil out of Defence Land. Complete all as specified and directed. |
| 71 | M&L for PCC (1:2:4) type B-0 (using 12.5 mm graded stone aggregate) as in benching, padding, roof kerbs or mud stops, coping etc rounded or chamfered on edges. Complete all as specified and directed. |
| 72 | M&L for painting the roof surface with a coat of hot blown paving industrial bitumen 85/25 at the rate of 1.20 kg/sq M over a coat of primer @ 0.3 litre per Sqm Complete all as specified and directed. |
| 73 | M&L for APP based polymeric membrane minimum weighing 3 Kg/sqm and minimum 3mm thick reinforced with five layer polyster non wove fabric (wi Not less than 150 gms/sqm) land on bitumen coted surface by forced application. Complete all as specified and directed. |
| 74 | M&L for 40 mm thick brick tiles laid on mud mortar and joints grounted flush in cement mortar 1:3 mixed with 5% crude oil by weight of cement on mud phuskha. Complete all as specified and directed. |
| 75 | All as per Item No 74 above but except brick tiles (cleaning of old reused brick tiles shall be included), Complete all as specified and directed by 79 M&L for flush pointing in cement mortar 1:3 on brick tiles laid flat on roof surfaces etc. Complete all as specified and directed. |
| 76 | M&L for flush pointing in cement mortar 1:3 on brick tiles laid flat on roof surfaces etc. Complete all as specified and directed. |
| 77 | M&L for PCC 1:2:4 Type B-0 (12.5 mm graded stone aggregate) as in bed blocks, coping, etc. Complete all as specified and directed. |
| 78 | S&F PVC (SWR) pipes with single socketed in any length with rubber ring joints laid in floor or fixed on brick walls 110 mm dia including demolition and braking up existing pipes in event n.exc 150 mm dia including all fittings. Complete all as specified and directed. |
| 79 | S&F PVC (SWR) pipes with single socketed in any length with rubber ring joints laid in floor or fixed on brick walls 75 mm dia including demolition and braking up existing pipes in event n.exc 150 mm dia including all fittings. Complete all as specified and directed. |
| 80 | S&F PVC (SWR) bends in radius 110 mm bore. Complete all as specified and directed. |
| 81 | S&F PVC (SWR) junction single, (Single T) equal or unequal in radius 110 mm bore. Complete all as specified and directed. |
| 82 | M&L 110mm PVC (SWR) PVC (SWR) floor/nahani trap, plain with grating including jointing with solvent cement fixed in repairs complete all as specified and directed. |
| 83 | S&F 50mm bore PVC (SWR) pipe single socketed, in any length with rubber ring joints, laid in floor, wall & spout etc. Complete all as specified and directed. |
| 84 | Dismantling plain corrugated asbestos/translucent sheet in roof covering incl ridges Complete all as specified and directed. |
| 85 | S&F Pre-painted galvalume aluminium zinc coating Gl based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa and finishing with resin coat on both surfaces @ 150 gm/sqm of coating as in roof covering/cladding to wall fixed with self tapping screws. Complete all as specified and directed. |
| 86 | S&F Rolled mild steel section as in joint, channel, angle, or tee section fixed independently without connecting plates, etc (cut to ordinary length i,e within 20mm of the length indicated) of Fe-410w (Gde-E-250) quality A. Complete all as specified and directed. |
| 87 | Demolition of cement concrete in ground floor and paving exc 15cm thickness (below or above ground level) and removing surplus spoil out of Defence Land. Complete all as specified and directed. |
| 88 | M&L for Sand filling under floors or in foundations including watering and consolidation as specified and directed. |
| 89 | M&L for 100 mm thick PCC type D-2 1:4:8(using 40mm graded stone aggregate) as in sub base flooring Complete all as specified and directed. |
| 90 | M&L for Machine pressed precast concrete interlocking paver block with grey cement and pigment any shape and size conforming to IS 15658-2006 of 60 cm thickness M35 Grade. Complete all as specified and directed. |
| 91 | M&L for cement concrete type B-1, 1:2:4(20 mm graded) in roof kerbs or mud stops rounded or chemfered edges. Complete all as specified and directed. |
| 92 | Surface preparation: Chipping of 50mm average thickness of unsound/weak concrete material from slabs, beams, columns ets, with manual chiesel and/or by standard power driven percussion type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes etc. and disposal of debris for all lead and lifts. Complete all as specified and directed. |
| 93 | Anti corrossive coating: Clean the rebars using the rust remover chemical if there is any rust existing, otherwise clean the rebar free of foriegn material. Mix the base and hardener of the anti-corrossive coating like Nitozine primer of Fosroc or equivalent mechanically using a slow speed hanvy duty drilling machine fitted with mixing paddle. Apply the mixed materials to the cleaned rebar and allow it to dry complete. The rate shall include the cost of all the operations etc. Complete all as specified and directed. Note: The bars which are badly corroded has to be strengthen by providing new bars of same specification by means of welding or winding. The reinforcing bar shall be measured and paid separately under appropriate item. |
| 94 | Epoxy jointing compound: Providing, mixing and applying bonding coat of approved adhesive on chipped portion of RCC as per specifications and direction of Engineer-in-charge complete in all respect. Epoxy bonding adhesive having coverage 2.20 sqm/kg of approved make. |
| 95 | Polymer modified mortar: Providing, mixing and applying 25 mm average thickness in 2 layers of SBR polymer (of approved make) modified cement mortar in proportion of 1:4 (1 cement: 4 graded coarse sand with polymer minimum 2% by wt. of cement used) as per specifications and directions of Engineer-in-charge. Note: Measurement and payment: The pre-measurement of thickness shall be done just after the surface preparation is completed and Payment under this item shall be made only after proper wet curing has been done and surface has been satisfactorily evaluated by sounding/tapping with a blunt metal instrument and/or the 75mm size cube crushing strength at the end of 28 days to be not less than 30 N/Sqmm), 25 mm average thickness in 2 layers |
| 96 | M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to. Complete all as specified and directed. |
| 97 | Taking down carefully aluminium / copper point wiring (light / fan / socket or power) complete including fitting such as switches, ceiling roses, socket, light fittings, regulators etc complete and making good disturbed surfaces of walls, floors etc, |
| 98 | Taking down unserviceable Submain of any size as directed. |
| 99 | Taking down main switch / DB as directed. |
| 100 | M&L for concealed point wiring complete with 1.5 sqmm single core multistranded copper conductor FRLSH, PVC insulated and unsheathed cable 650 /1100 volts grade drawn through & including PVC conduit ,medium grade with accessories like bends, tees, junction boxes etc fix on wall or ceiling surfaces all as specified including 1.5 sqmm , FRLSH type , copper multistranded cable as earth wire including pressed steel sunken boxes for mounting of MODULAR TYPE switch/sockets and regulator and including modular type cover plate white colour all as specified and directed for:a) One light / fan / call bell point controlled by one, one way switch. |
| 101 | b) One 3 pin socket out let 5 Amps on same board. |
| 102 | c) One 3 pin socket out let 5 Amps on Independent board. |
| 103 | All as per item No.100 about but with 2.5 sqmm multistranded copper multistranded conductor FRLSH cable with 2.5 sqmm earth wire for one 6 pin socket outlet 15 amps on independent board |
| 104 | Supply and fixing modular metal flush box 1/2 module complete all as specified and directed. |
| 105 | Supply and fixing modular metal flush box 3 module complete all as specified and directed. |
| 106 | Supply and fixing modular metal flush box 4 module complete all as specified and directed. |
| 107 | Supply and fixing modular metal flush box 6 module complete all as specified and directed. |
| 108 | Supply and fixing modular metal flush box 8 module complete all as specified and directed. |
| 109 | Supply and fixing modular metal flush box 12 module complete all as specified and directed. |
| 110 | Supply and fixing modular white cover plate with frame, 1 module complete all as specified and directed. |
| 111 | Supply and fixing modular white cover plate with frame, 2 module complete all as specified and directed. |
| 112 | Supply and fixing modular white cover plate with frame, 3 module complete all as specified and directed. |
| 113 | Supply and fixing modular white cover plate with frame, 4 module complete all as specified and directed. |
| 114 | Supply and fixing modular white cover plate with frame, 6 module complete all as specified and directed. |
| 115 | Supply and fixing modular white cover plate with frame, 8 module complete all as specified and directed. |
| 116 | Supply and fixing modular white cover plate with frame,12 module complete all as specified and directed. |
| 117 | Supply and fixing modular Dummy plate complete all as specified and directed. |
| 118 | Supply and fix Modular switch 6 Amps single pole one way as per make & model/ as per sample. Note : All switches from 6 Amp to 25 Amp should be latest ISI marked as per IS 3854 : 2023 complete all as specified and directed. |
| 119 | Supply and fix Modular switch 16 Amps single pole one way as per make & model/ as per sample. Note : All switches from 6 Amp to 25 Amp should be latest ISI marked as per IS 3854 : 2023 complete all as specified and directed. |
| 120 | Supply and fix Modular multi socket 3 pin and 2 pin 6 Amps round and flat as per make & model as per sample . Note : Sockets 6 Amp 3 Pin and 6/16 Amp 3 Pin combined should be latest ISI Marked as per IS 1293 : 2021 and should be supplied with shutters and shutters opening with phase and neutral simultaneously. The range should have all the types of Indian Standard or Multistranded International sockets range in their profilem complete all as specified and directed. |
| 121 | Supply and fix Modular socket 6A /16 A Twin socket heavy duty as per make & model as per sample. Note : Sockets 6 Amp 3 Pin and 6/16 Amp 3 Pin combined should be latest ISI Marked as per IS 1293 : 2021 and should be supplied with shutters and shutters opening with phase and neutral simultaneously. The range should have all the types of Indian Standard or Multistranded International sockets range in their profile complete all as specified and directed. |
| 122 | S&F MODULAR fan regulator step type 120W, 02 module complete all as specified and directed. |
| 123 | Supply and Fixing Ceiling rose, surface bakelite 3 terminal, 240 volts, 5 Amps with back plate of 3 mm thick bakelite, laminated hylem sheet of appropriate size ,complete ,all as specified. |
| 124 | M&L Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings. |
| 125 | M&L for sub main wiring with two single core PVC insulated and unsheathed cable 4 sqmm with multi stranded copper conductor , FRLSH type cable drawn through and including PVC concealed conduit of 20mm in size complete with all accessories alongwith provn of 4 sqmm PVC insulated and unsheathed ,multi stranded copper conductor , FRLSH type cable as earth wire. |
| 126 | M&L for sub main wiring with two single core PVC insulated and unsheathed cable 6 sqmm with multi stranded copper conductor , FRLSH type cable drawn through and including PVC concealed conduit of 25mm in size complete with all accessories alongwith provn of 6 sqmm PVC insulated and unsheathed ,multi stranded copper conductor , FRLSH type cable as earth wire. |
| 127 | Supply and fix MCB DB, TPN 6 way double door Vertical type suitable for mounting of MCCB as incomer with suitable 200 amps rated bus bars , Neutral links , blanking plates Distribution boards should be Double Door design with IP-43 and IK-08 rating as per IEC 61439-3 with 200 Amp fully insulated copper busbars, insulated neutral bar, earth bar and cable ties for cable management including thermal based release adjustable type 4 pole 63 Amps MCCB, 50 Hz, 415 Volts with rupturing capacity 16 KA . Distribution board should be supplied with door earthing, prefitted masking sheet, reversible doors and pan assembly for easy installation. Must have possibility of converting lock to panel lock complete all as specified and directed by EIC . complete all as specified and directed. All 3 Phase horizontal distribution boards should have the provision to convert the distribution boards to Per Phase Isolation Distribution Board at site. All MCCB incomer distribution boards should be supplied with 250 Amp rated fully shrouded busbars complete all as specified and directed. |
| 128 | Supply and fix Sheet metal DB,double door, SPN 8 way for MCB, 240 volt with 200 amps rated bus bar , neutral bar / connectors suitable copper thimbles , lugs etc. Distribution boards should be Double Door design with IP-43 and IK-08 rating as per IEC 61439-3 with 100 Amp fully insulated copper busbars, insulated neutral bar, earth bar and cable ties for cable management. Distribution board should be supplied with door earthing, prefitted masking sheet, reversible doors and pan assembly for easy installation. Must have possibility of converting lock to panel lock complete all as specified and directed. |
| 129 | S&F MCB SPN, 240 volts, 40 to 63 Ampere, rupturing capacity 10 KA, ‘B’ curve type ,MCB should be having the Breaking Capacity of 10 kA and should be ISI marked as per IS/IEC 60898-1 2002 with “B” Curve Characteristics. Should have bi-connect terminals on the bottom terminals for looping and should have 35 sq mm termination capacity on both terminals with insulated sliding shutters for making it IP-20 protected & with two position DIN Rail Clamp for easy mounting. complete all as specified and directed. |
| 130 | Supply & Fixing MCB single pole, 240 volts, 6 to 32 Ampere, rupturing capacity 10 KA, ‘B’ curve type ,MCB should be having the Breaking Capacity of 10 kA and should be ISI marked as per IS/IEC 60898-1 2002 with “B” Curve Characteristics. Should have bi-connect terminals on the bottom terminals for looping and should have 35 sq mm termination capacity on both terminals with insulated sliding shutters for making it IP-20 protected & with two position DIN Rail Clamp for easy mounting. complete all as specified and directed. |
| 131 | Supply and Fixing single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of cap 20A complete all as specified and directed. |
| 132 | S&F in replacement LED tube light fitting 20W Box type including LED lamp 20 W with 2200 lumen output with internal surge protection device of 4KV with voltage band of 140-280V CRI-6500K (White light) fixtures and connecting electrically to ceiling rose using PVC insulated and overall sheathed flexible copper conductor of size 0.75mm 3 core complete all as specified and directed. |
| 133 | S&F Kitchen Chimney, Dry Heat Auto Clean Technology ,Stainless Steel Finish,Front Black Glass panel with Digital Display, Touch Control Panel with 3 speed Gesture motion , Heavy Duty Baffle Filters ,minimum Air flow 1180 m3/h , Energy Saving LED Light of suitable wattage , Copper winding Motor ,62dba max Noise level and voltage 220-240V/50Hz including making of hole in the wall and making good the disturbed surface of wall incl. all accessories all as specified and directed. Make - KAFF, Model No-SKU NEVISDHC90 or equivalent to approved makes Hindware ,Kutchina. |
| 134 | S&F LED mirror light 10Watt 2 feet with a nominal efficiency 105 lumen/watt complete all as specified and directed. |
| 135 | Supply, Installation, Testing & Commissioning (SITC) of decorative wall light fixture made up of polycarbonate/glass die cast aluminium housing with poder coated finish 10 W to 15 W ,IP43 protection and BIS certified inbuilt LED driver, glare free uniform illumination complete with mounting base, warm/white, hardware, lamp and connection as required at site all as specified and directed. Reputed make as approved before installation. |
| 136 | Supply, Installation, Testing & Commissioning of high-quality integrated LED Street Light with a minimum system lumen of4750 Lm and system wattage not exceeding 45W with a nominal efficiency 105 lumen/watt. CCT of 5700K with SDCM of < 5 and CRI >70. The housing should be of non-corrosive high-pressure die-cast aluminum with high efficiency LEDs as lighting source and lens embedded PC cover having TOP Opening seperate driver compartment with IP66 protection and impact resistance of IK07 with PF > 0.95. Lifetime of 50K hours @L70. The Luminaire should have Powered by integral, Isolated LED electronic driver (SMPS based constant current supply) with lower THD, Output Open / Short Circuit protection, Phase to Phase protection (Operation at 440 V AC), Over Voltage protection, Surge Voltage protection upto 4 kV. Manufacturer shall have inhouse lab approved by NABL or ministry of science of govt of India. LM 79 and LM80 reports need to be submitted from a NABL/ULaccredited lab to verify above parameters complete all as specified and directed. |
| 137 | Supply & fix Exhaust fan Metallic body, Heavy duty,copper wound, AC 230/240 V, 1400 RPM of size 450 mm sweep with louvers/XPM jaali of suitable size, incl making opening in wall for fixing the exhaust fan complete all as specified and directed. |
| 138 | Taking down existing Ceiling fan/Exhaust fan capacity/type carefully and refixing the same complete all as specified and directed. |
| 139 | M&L for earthing complete with galvanised earth plate electrode 600 X 600 X 6 mm thick buried directly in ground (earth pit not less than 2.25 m below ground level) with top edge of earth plate not less than 1.5 m below normal ground level, connected to galvanised earth lead wire 4 mm dia by means of nuts, bolts, check nuts & washers of galvanised iron or steel all as shown on electrical plate No. 3 of MES schedule 2009, Part – I (Specifications) and connected to main switch board / main DB’s / earthing test point including all necessary excavation and earth work in any type of soil, adequate quantity of charcoal dust & common salt all around the earth plate minimum 150 mm in all directions with & including watering pipe 20 mm dia GI medium grade, GI funnel made out of 0.63 mm thick GI sheet, wire gauge, 50 mm thick RCC cover in PCC 1:2:4, type B-1, duly reinforced with 6 mm dia mild steel round bars @ 150 mm both ways center to center with suitable lifting handle to cover, earth pit of PCC 1:3:6 type C-1, GI protection pipe light grade 15 mm bore up to 7.5 m length from earth electrode & engraving of earth marking on nearby building with CM 1:4 plate size 200 X 150 X 15 mm & painting of earth result etc. including testing on and taking down old one complete all as specified and directed. Note :- (i) On testing after completion of job, if desired earth resistance is not obtained, the earthing shall be redone by the contractor without any extra cost to Govt. |
| 140 | Taking down existing Solar water heater of any Make/Capacity carefully complete all as specified and directed. |
| 141 | Refixing Solar Water heater & servicing and maintenance of complete solar water heater of any capacities installed at single/double/triple storey bldgs for plugging leakages, by gas welding, brazing’s, Copper plates, tubes, trays and hot water tank , cleaning of flat plate collector glass & cleaning of Water storage tank and make up tank, including dismantling inlet and out let connections and re-fixing the same after cleaning for proper functioning to maintain proper water temperature and including necessary angle iron work, PCC work included in the unit rate complete all as specified and as directed. Note : All necessary minor items such as Tee, elbow, Nipple, union, piece of rubber pipe etc. shall be included in item rate quoted by the contractor. |
| 142 | Taking down unserviceable Cable of any size as directed. |
| 143 | Supply and laying XLPE insulated , armoured electric cable heavy duty with aluminium conductor , 1100 volts UG cable of size 4 Core 25 Sqmmm. |
| 144 | Excavation in trenches in soft/lose soil not exceeding 1.5 Mtr wide and not exc 1.5M depth for laying of UG cables and getting out all as specified and directed |
| 145 | Returning, filling, including spreading, levelling, watering and well ramming in layers not exc 25cms thick of soil complete all as specified and directed. |
| 146 | M&L river sand in trenches as cable cushioning 8 cm below the cables and 15cm above the cable which is to be punned down to 10m all as specified and directed.only punned thickness will be measured. |
| 147 | Removing the surplus excavated materisl/soil to a distance not exc 50Mtrs and depositing, where directed at a level not exceeding 1.5 Mtr above the starting point all as specified and directed. |
| 148 | Supply and lay burnt bricks sub class 'B' standard size laid across the cable in trenches as protection to the cable all as specified and directed. |
| 149 | Supply and fixing /laying PVC conduit pipe 20mm bore light grade fixed to pole with clamps nuts, Bend/Tee/Junction box , bolts and washers or laid under road crossing or fixed to wall complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 17, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 06, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysOct 13, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 10 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender