Tender For Comprehensive Maintenance To Md Accn Under Age B/R-I Of Ge (South) Mamun
Tender Value
27.50 Lakhs
Estimated cost
Bid Submission
07 Oct 2026
18 days left
EMD
55000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pathankot → Punjab
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Comprehensive Maintenance To Md Accn Under Age B/R-I Of Ge (South) Mamun
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of brickwork or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc., but excluding ashlar facing, dressed stone work and precast concrete articles, complete all as specified and directed. |
| 2 | Demolition of cement concrete (unreinforced) or tiling etc in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed. |
| 3 | Demolition of cement concrete (unreinforced) on roof floors other than ground floors beams, starecase, landing, chajja and simlar works complete all as specified and directed. |
| 4 | Demolition of floor, hearth or wall tiling including cement mortar bedding (but not backing), removing rubbish off the premises complete all as specified & directed. |
| 5 | Taking down cement plaster / wall tiles including backing etc from brick/stone walls / concrete surfaces including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed |
| 6 | Taking down chowkats or frames including shutters (without taking off shutters from the frame) not exc. 1.5 Sqm each, complete all as specified and directed. |
| 7 | Taking down chowkats or frames including shutters (without taking off shutters from the frame) exc. 1.5 Sqm but n exc 4.0 sqm each, complete all as specified and directed. |
| 8 | Taking down shutters of any description exc. 1.00 sqm and not exc. 2.00 Sqm each, complete all as specified & directed. |
| 9 | Taking down shutters of any description not exc. 1.00 Sqm each, complete all as specified & directed. |
| 10 | Taking down, easing and adjusting shutters of any description, exceeding 1.00 Sqm and not exceeding 2.00 Sqm each and re-fixing in the same opening complete all as specified and directed. |
| 11 | M&L for brickwork with Fly Ash Bricks (old size), straight or curved on plan exceeding 6 metre mean radius built in cement sand mortar 1:6 complete all as specifiedand directed. |
| 12 | S&F factory made single extruded WPC (Wood Polymer Composite) solid door/ windows/ Ceosetory windows & other frames / Chowkaht of size 50 x 100 mm comprising of virgin PVC Polymer of K value 58-60 (Suspension grade), calcium carbonate and natural fibers (wood powder/ rice husk/ weat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solveng cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 Kg/ cum, screw withdrawal strength of 2200N (Face), 1100 N (Edge), minimum compressive strength 58 N/ mm Sq, Modulus of elasticity 900 N/ mm Sq and resistence to spread of flame of Class A category with property of being termite / borer proof, water/ moisture proof and fire retardant and fixed in position MS hold fasts/ lugs/ SS dash fasteners of required dia and length complete, as per direction of Engr-in-Charge (Note MS hold fasts/ Lugs or SS Fasteners shall be paid separately)Note : For WPC Solid door/ window frames minus 5mm tolerance in demension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 13 | S&F factory made single extruded WPC (Wood Polymer Composite) solid door/ windows/ Ceosetory windows & other frames / Chowkaht of size 50 x 125 mm comprising of virgin PVC Polymer of K value 58-60 (Suspension grade), calcium carbonate and natural fibers (wood powder/ rice husk/ weat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solveng cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 Kg/ cum, screw withdrawal strength of 2200N (Face), 1100 N (Edge), minimum compressive strength 58 N/ mm Sq, Modulus of elasticity 900 N/ mm Sq and resistence to spread of flame of Class A category with property of being termite / borer proof, water/ moisture proof and fire retardant and fixed in position MS hold fasts/ lugs/ SS dash fasteners of required dia and length complete, as per direction of Engr-in-Charge (Note MS hold fasts/ Lugs or SS Fasteners shall be paid separately)Note : For WPC Solid door/ window frames minus 5mm tolerance in demension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 14 | S&F factory made single extruded WPC (Wood Polymer Composite) solid door/ windows/ Ceosetory windows & other frames / Chowkaht of size 45 x 70 mm comprising of virgin PVC Polymer of K value 58-60 (Suspension grade), calcium carbonate and natural fibers (wood powder/ rice husk/ weat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solveng cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 Kg/ cum, screw withdrawal strength of 2200N (Face), 1100 N (Edge), minimum compressive strength 58 N/ mm Sq, Modulus of elasticity 900 N/ mm Sq and resistence to spread of flame of Class A category with property of being termite / borer proof, water/ moisture proof and fire retardant and fixed in position MS hold fasts/ lugs/ SS dash fasteners of required dia and length complete, as per direction of Engr-in-Charge (Note MS hold fasts/ Lugs or SS Fasteners shall be paid separately)Note : For WPC Solid door/ window frames minus 5mm tolerance in demension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 15 | S & F solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square ttube, suppling & fixing in opening as per specification & drawing. |
| 16 | S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap inserted for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing. |
| 17 | M & L for 35mm thick factory made 2nd class hard woof (Sal/ Hollock) plain, framed, panelled shutters (two panels) with lock rail and panels of 9mm B.W.P. commercial ply or 12mm veneered particle board with commercial face veneers on both sides. The size of rail and style as per IS-1003 (Part-I), kiln seasoned and chemically pressure treated, fitted to chowkats, complete all as specified & directed. |
| 18 | S&F factory made single extruded WPC (Wood Polymer Composite) solid Flush door shutter of 30mm thickness comprising of virgin polymer of K value 58-60 (Suspension grade), calcium carbonate and natural fibers (wood powder/ rice husk/ weat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650kg/ cum and screw withdrawal strength of 1800 N (face) & 900 N (Edge), minimum compressive strength 50 N/ mm Sq, Modulus of elasticity 850 N/ mm Sq and resistence to spread of flame of Class A category with property of being termite / borer proof, water/ moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws, all as per direction of Engr-in-Charge (Note Stainless steel butt hinges and necessary SS screws shall be paid separately) |
| 19 | S&F 35mm thick single piece Factory made wire gauge door shutters including wire cloth (steel & aluminium XPM) manufactured of 5mm thick PVC sheets printed on both side on frame made out of M.S tube 19 SWG, size 19mmx19mm complete in all respect with lock rail and beautified by PVC beading all around fixed with PVC solvent cement all as per Drawing No CEPZ/TD-378/, Sheet 1/1 dated 27/12/2011, as specified and directed |
| 20 | S&F 35mm thick 2nd class hard wood, glazed and skeleton door shutters, factory made, open rebated and prepared to receive glass or gauge etc., (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc., size of members of shutters as specified in clause 8.24 (a) of SSR Part-I, complete all as specified & directed. |
| 21 | S&F in repair factory made 18mm (+ 0.7mm) thick WPC board as in cupboard shutters / Shelves / partitions, prelaminated one side with coating of ultra voilet chemical, glossy/mat finish incl. 100% termite/water proof, fire retardant, Eco friendly, density not less than 600Kg/cum finish at all edges for making edges lipping/bending, complete as per direction of Engineer-in-Charge and manufacturer's instructions complete all as specified and directed. |
| 22 | S&F hasp and staple 100 mm in size, aluminium anodised, including bolt to hinge plate and fixed with screws complete all as specified and directed. |
| 23 | S&F continuous (piano) hinges, mild steel, bright finish width of flaps (when open) 30 mm complete all as specified and directed. |
| 24 | S&F Stainless steel designer handle (heavy duty) of 100mm size, fixed to drawers or cupboard shutters, complete all as specified & directed. |
| 25 | M&L Magnet Ball catches with 8mm dia steel ball, and brass body and striking plate including letting in and fixed complete all as specified and directed |
| 26 | S&F mild steel butt hinge 100 mm long, stainless steel, medium weight with SS hinge pin and fixed complete all as specified. |
| 27 | S&F aluminium alloy, anodised, sliding door bolt 300 mm with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or castaluminium alloy and fixed, complete all as specified and directed. |
| 28 | S&F aluminium, anodised, barrel tower bolts of extruded section, length of bolt 150 mm and fixed complete all as specified and directed. |
| 29 | S&F aluminium handle, anodised of extruded section, 125 mm size and fixed.complete all as specified and directed. |
| 30 | S&F rubber lining fitted with aluminium powder coated strip, 100mm wide for door cill complete all as specified and directed. |
| 31 | S&F floor door stopper of 140mm long cover plate of aluminium alloy body and tongue anodised with hard drawn steel spring, fixed in floor complete all as specified and directed |
| 32 | S&F Mild steel, 300mm, ordinary rat tail rod patttern springs includding roller and roller plate complete fixed with screw or necessary welding to pressed steel door frame complete all as specified and directed. |
| 33 | S&F stainless steel peg set of six of size 400mm x 30mm x 3mm fitted with machine screw and wooden and plastic cleats (minimum wt 190gms) complete all as specified and directed. |
| 34 | S&F in repairs stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with statinless steel wire staples complete all as specified and directed. |
| 35 | S&F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with statinless steel wire staples complete all as specified and directed. |
| 36 | S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty in square not exc. 0.5 sqm in each pane, complete all as specified and directed. |
| 37 | S&F in repair 25mm outer dia stainless steel decorative drapery rod of thickness 20 guage with stainless steel brackets near to ends with stainless steel finials with adopter for 25 mm dia drapery rod at both ends complete all as specified and directed. |
| 38 | Taking up or down steel tubing of 15mm bore and connection, laid in trenches or floors or fixed to walls and including cleaning for refixing or removal to store with all fittings, complete all as specified and directed. |
| 39 | Taking up or down steel tubing of 20mm bore pipe and connection laid in trenches or floors or fixed to walls and including cleaning for refixing or removal to store with all fittings, complete all as specified and directed. |
| 40 | M&L for cutting chases not exc 10 cm girth in brick walls, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc; and cutting chases for concealed water tubing etc. and making good, complete all as specified and directed. |
| 41 | S&F steel water tubing 15 mm bore medium grade galvanised, with all fittings (ISI marked) fixed complete to walls, ceiling or laid in floors complete all as specified and directed. |
| 42 | S&F steel water tubing 20 mm bore medium grade galvanised, with all fittings (ISI marked) fixed complete to walls, ceiling or laid in floors complete all as specified and directed. |
| 43 | S&F galvanised steel pipe 32 mm bore, light grade in short length as spout pipe, laid in brick wall in PCC 1:2:4 type B-1 for drainage of any seeped out water in sunken floor slab incl making hole in wall complete all as specified and directed. |
| 44 | S&F in repair Rotational moulded polyethlene water storage tanks three layers of 500 ltrs capacity ISI marked (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I including 20mm bore Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe and fixed refixing of inlet, outlet & over flow pipe etc. (Minimum weight of 20mm ball valve - 210 gms including dismantling of old brocken water tank complete all as specified and as directed. |
| 45 | S&F in repair Rotational moulded polyethlene water storage tanks three layers of 1000 ltrs capacity ISI marked (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I including 20mm bore Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe and fixed refixing of inlet, outlet & over flow pipe etc. (Minimum weight of 20mm ball valve - 210 gms including dismantling of old brocken water tank complete all as specified and as directed. |
| 46 | S&F in repair 20mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball, screwed for iron pipe and fixed complete all as specified and directed. (Minimum weight - 210 gm) |
| 47 | S&F in repair 25mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball, screwed for iron pipe and fixed complete all as specified and directed. (Minimum weight - 210 gm) |
| 48 | S&F Stop valve (ISI Marked), cast copper alloy with long shank and cup (concealed type), screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions of 15 mm bore and fixed complete all as specified and directed.. |
| 49 | S&F bib tap 15 mm bore long body, Brass CP, fancy type (long shank), with crutch or butterfly handle screwed down screwed for iron/PVC pipe or for brass ferrule and fixed, complete all as specified and directed. |
| 50 | S&F Stop valve /Angle valve (ISI Marked), fancy type, chromium plated with long shank and cup (concealed type) screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron /PVC pipe or for unions of 15 mm bore and complete all as specified. |
| 51 | S&F in repairs CP Brass shower rose 200x200 mm size with with brass chromium plated flexible arm 450-550mm long for 15mm bore pipe complete all as specified and directed. |
| 52 | S&F in repairs CP Brass shower rose 100x100 mm size with with brass chromium plated flexible arm 450-550mm long for 15mm bore pipe complete all as specified and directed. |
| 53 | S&F in repairs Soap dish 120mm x 85mm (material SS finish, glossy) fixed to plugs with CP brass screws complete all as specified and directed. |
| 54 | S&F in repairs, Vitreous china squatting pan of pattern, long pan, 'Orissa pattern', size 580 x 440 mm white with integral foot rests (excl flushing cistern and flush pipe) but including provision concrete bedding CI floor trap etc complete all as specified and directed. |
| 55 | S&F Vitreous china wash down water closet pan (Pedestal pattern) white (excl fixing bolts, flushing cistern and flush pipe) but including plastic water closet seat, white, closed pattern with flat bottom and cover and mild steel CP or aluminised hinging device complete all as specified and directed. |
| 56 | S&F in repair, plastic water closet seat cover, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminized hinging device for pedestal pattern WC, black/ white colour complete all as specified and directed . |
| 57 | S&F in repair hand shower (Health Faucet) brass with 8 mm dia,1.2 m long Rubber flexible tube with Chromium plated spring type cover & Wall Hook for water closet complete all as specified and directed. |
| 58 | S&F in repairs toilet seat/commode hand free jet spray (regular type) (1.5 mtr) complete all as specified and directed. |
| 59 | Supply and fixing as in repair fancy type looking mirror 5.5mm thick bevelled edged, made out of selected quality glass of 6mm thick mounted on 6mm thick building board or commercial plywood & fixed to wooden plugs with Stainless Steel brackets & Stainless Steel fancy type screws & locking washers at 04 corners complete all as specified and directed. |
| 60 | S& F for 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers ® |
| 61 | S&F in repair Centre hole basin mixer without popup waste system with 450mm long braided hoses cast copper alloy for iron pipes 15 mm bore, screwed for iron pipe and fixed and all as specified and directed. |
| 62 | S&F in repairs PVC flushing cistern, 10 litre capoacity, low level, push botton type dual flush type PVC valveless, syphonic action type, white, with inlet, ball valve, float and handle incl brackets & flush pipe PVC 32 mm dia complete all as specified and directed. |
| 63 | S&F in repair glass self straight with CP railing 20'' with CP Brass Bracket, complete all as specified and directed. |
| 64 | S&F in repair corner glass corner shelf quarter round with CP Brass Bracket, complete all as specified and directed. |
| 65 | S&F in repairs sink with drainage board, made of stainless steel 1 mm thick, over all size 915 mm x 460 mm and bowl size 400mm x 300mm x 180mm with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets of angle iron and connecting union to pipe complete all as specified and directed. |
| 66 | S&F in repairs Vitreous china wash basin, flat back, white, size 550 x 400 mm excl taps, waste chain and plug and porcelain stopper but inclluding vitreous china pedestal and PVC waste pipe with union, 32 mm dia complete all as specified and directed. |
| 67 | S&F corrugated waste pipe, 32 mm dia, suitable for WHBs/sinks/Urinal, including threaded PVC socket suitable for shank of waste coupling complete all as specified. |
| 68 | S&F corrugated waste pipe, 40 mm dia, suitable for WHBs/sinks/Urinal, including threaded PVC socket suitable for shank of waste coupling complete all as specified. |
| 69 | S&F Inrepair Waste coupling 32mm of PTMT half or full threaded) Minimum weight 32mm- 45gms/40mm-60 gms) |
| 70 | S&F inrepair Waste coupling 40mm of PTMT half or full threaded) Minimum weight 32mm- 45gms/40mm-60 gms) |
| 71 | S&F in repairs Brass CP towel rail 20mm dia 'D' type 60 cm long between flanges complete all as specified and directed. |
| 72 | S&F PVC connection 15 mm bore, 600 mm long, with PTMT nuts complete all as specified and directed. |
| 73 | S&F in repair PVC (SWR) floor trap, dia of outlet in 75 mm, plain excluding grating, but including jointing with solvent cement fixed in repair. |
| 74 | S&F PVC grating square, 150 mm (Hinge pattern and with or without hole cpmplete all as specified and directed. |
| 75 | S & F in repair fancy type Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed |
| 76 | S & F in repair water tank lid of 500 ltr/1000 ltr complete all as specified and directed. |
| 77 | S&F in repairs 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls including taking down existing old CI pipes & fittings complete all as specified and directed.Note:- The measurement of pipes shall be net as fixed between the fittings including short lengths, without any allowance for cutting and waste or for the portions of pipes entering the sockets of the adjacent pipe or fitting. Fittings and accessories such as bends, branches, sockets etc. shall be enumerated afterwards and measured separately. Rates include for all necessary extra joints, cutting and waste. |
| 78 | S&F 110 mm bore PVC (SWR) bend any radius, with or without excess door complete all as specified and directed. |
| 79 | S&F in repairs, 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls including taking down existing old CI pipes & fittings complete all as specified and directed. Note:- The measurement of pipes shall be net as fixed between the fittings including short lengths, without any allowance for cutting and waste or for the portions of pipes entering the sockets of the adjacent pipe or fitting. Fittings and accessories such as bends, branches, sockets etc. shall be enumerated afterwards and measured separately. Rates include for all necessary extra joints, cutting and waste. |
| 80 | S&F 75 mm bore PVC (SWR) bend any radius, with or without excess door complete all as specified and directed. |
| 81 | S&F 75 mm bore PVC (SWR) vent cowl complete all as specified and directed. |
| 82 | M&L for non-skid ceramic jointless coloured tiles, 7 to 8 mm thick (square/ rectangular) area of each tile exc 0.18 sqm but n exc 0.38 sqm in floor etc set & jointed in neat cement slury & pointed in white or coloured cement mixed with pigment to match, laid over and including 15mm thick cement screed in cement mortar 1:6, complete all as specified and directed . |
| 83 | M&L for glazed ceramic coloured tiles of size 450mmx300mm, thickness 7mm as in vertical surfaces such as skirting, dado, etc., set and jointed in neat cement slurry and pointed with coloured cement to match, laid over and including 10mm thick rendering in cement mortar 1:4, complete all as specified & directed. |
| 84 | M&L for 25 mm thick (average thickness) PCC 1:2:4, type B-0 using 12.5mm graded stone aggregates as in floor to required gradient/undulation, finished even and fair without using extra cement, complete all as specified and directed. |
| 85 | M&L for rendering 10 mm thick plaster in cement mortar 1:3 on concrete surfaces as in ceilings finished even and smooth without using extra cement complete all as specified and directed. |
| 86 | M&L for rendering 10 mm thick plaster on fair faces of brick work or concrete surface in cement mortar 1:6, finished even and smooth without using extra cement complete all as specified and directed. |
| 87 | M&L for rendering 12mm thick plaster in cement mortar 1:4 mixed with and including WPC @ 200ml/50Kg of cement, on brick work and concrete surfaces of walls, surface finished even and smooth without using extra cement, complete all as specified and directed. |
| 88 | Taking down cement plaster and decayed concrete of any description from roof projection, chajja etc upto tripple storey of building, and making good the decayed portion with cement mortar 1 :3 mixed with & including water proofing compound as per manufacturer's instructions or PCC 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregate) including necessary form work and finally finished the surface with 15mm thick cement plaster in cement mortar 1:3, complete all as specified and directed. |
| 89 | M&L for preparation of newly plastered surfaces of walls and applying two coat of oil bound distemper, white or tinted shade including priming and smoothing surface with 1.00mm thick cement based wall care putty complete all as specified and directed. |
| 90 | M&L for preparation of newly plastered external surfaces of walls applying two coats of cement based paint, white or tinted including curing before and after paint complete all as specified and directed. |
| 91 | M&L for preparation of newly plastered surfaces of ceilings and applying three coats of white wash complete all as specified and directed. |
| 92 | M&L for preparing of new or previously untreated wooden or wood based surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 93 | M&L for rendering 15 mm thick plaster in cement mortar 1:4 mixed with intergral water proofing compound and applying 75 mm thick padding and junction coved filling of PCC M-20 Nominal Mix (1:1.5:3) using 12.5mm graded stone aggregate on the junction of floor and wall the surface shall then be cured and allowed to dry, apply Epoxy Resins Coating, polymer Modified Cementation coating like brush bond of fosroc, pidilite and bostic as per manufacturer's instructions both on floor as well as on wall complete all as specified and directed. |
| 94 | Supply only liquid water proofing compound conformimg to relevant IS complete all as specified and directed. |
| 95 | M&L for cement concrete 1:5:10 type D-2 (using 40mm graded crushed stone aggregate as in mass filling in sunken floors of kitchens/toilets, complete all as specified and directed. |
| 96 | Taking down existing roof treatment of any description incl mud phuksha or PCC padding of any description, any No. of layers including removal to debries in low laying area exc 1.00 KM but n exc 2.00 KM complete all as specified and directed. |
| 97 | S&F Wire netting made of stainless steel wire 0.71 mm dia with size of mesh 25mm fixed with tinned tacks of stainless steel wire staples complete all as specified and directed. |
| 98 | M&L for cement concrete 1:1.5:3 type B-0 (using 12.5 mm graded stone aggregate) as in leveling course on existing roof, rounded and chamfered on edges, mixed with & including WPC @200ml/ cement bag of 50 Kg complete all as specified and directed. |
| 99 | M& L preperation of inaccessible roof surface by scrapping and properly cleaning the existing roof treatment in any number of layers upto original RCC roof top surafce. Apply first coat Fiber reinforced Elastomeric liquid water proofing membrane formulated with PU hybrid polymers and reinforcing acrylic fibres with sun reflective index(SRI) of 100-110 , hsving minimum elongation of 350% tensile strength of 2.9 Mpa and shall have cracks bridging ability upto 2.5mm and shall resisit 10 bars of hydrostatic pressure reduce surface temperatureuoto 10 degree celsius with 33% dilution of priming coat. Laying of fiber mesh of 0.3 mm thickness weave in leno pattern having 45 gsm/Sqm and pasting it properly iwith overlap of 50mm and aloow it toodry.Apply second of undiluted coat @4.5 Ltr/Sqm. Apply third and final co for 10mm thick cement rendering in CM 1:E168at undiluted @0.45 ltr/sqm. Aplly third and final coat [email protected]/Sqm as directed by Engr in Charge.(a) M&L for 10mm thick cement rendering in CM1:3 and finishing the surface even and smooth before application of priming coat Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 17, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 07, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysOct 15, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 26 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender