Drinking Water Supply and Sanitation Local Bodies Closing in 2 days TDR #57565371

Tender For Maintenance Work Of Community Toilet In Polur Municipality.

Issued by Local Bodies · Tiruvannamalai, Tamil Nadu
Tender Value
2.20 Lakhs
Estimated cost
Bid Submission
06 Oct 2026
2 days left
EMD
4400
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Tiruvannamalai → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender for Maintenance Work Of Community Toilet In Polur Municipality.

BOQ

Name of Work:- Maintenance Work of Community Toilet in Polur Municipality.
Sl. No. Item Description
1Wiringwith2x1.5sq.mm.PVCinsulatedSCunsheathedFRLScopperconductorof1100VgradeinsuitablePVCrigidpipeonwallandceilingwithPVCaccessoriesandwithTWswitchboxand5AFTswitchwithpaintingofsuitablecolourfor open PVC light point / fan point (for electronic regulator) (5 points per coil) SD-18
2Supply and Fixing of PVC Screw Down Tap Heavy Type 20mm dia SOR-M-0510
3Supply and Fixing of 4’ 18W Crystal Glass LED Tube Light Fitting SOR-M-1211
4Supply and Fixing of Wash Basin Bottom 50mm dia PVC Waste Water line
5Manufacturing supplying and fixing of Fully Panelled steel door with the following specification MS angels of size 40x40x6mm are used for the outer frames and M.S. angles of size 35x35x5mm for the shutter frames, stiffeners with 32 x 6mm M.S flat is provided at required intervals in the shutter frame. 18-gauge C.R. sheet laid as panel in the shutter and welded intact. M.S. flat 18x5mm is welded over the 32 x 6mm M.S. flat sandwitching the C.R. sheet in between additional stiffeners with 18x5mm M.S. flat is provided diagonally at the rear side of the shutter. 3nos. of Steel Parliament Hinges of Size 125mm x 150mm in case of single leaf and 6nos. of Steel Parliament Hinges of Size 125mm x 150mm in double leaves shutter to be provided. 6nos. of holdfasts 200 mm in length made of angle section spliced at the ends are welded to the outer frames of the door. Tower bolts 3 nos, one at the top, one at lock rail(Inner) and the other at the bottom are provided 1no. Aldrop is provided at lock rail section in the door 2 Nos of 200mm handle are to be provided. One rotaing locking arrangements for the inner side of the door and additional provision for locking arrangements for lock is provided on the rear side of the door at an appropriate place. Incase of double leaf door M.S.Flat 32 x 3mm at 1.1Kg/m is provided on the one shutter t conceal the gap between the two shutters. at an appropriate place in the door. A tie bar is provided at the bottom of the frame to prevent twisting of frame during transportation and fixing. All members are given a coat of red oxide primer as directed by the departmental officers. The rate includes cost of all materials, labour charges, transportation to site of work, loading, un loading and all other incidental charges etc., complete complying with standard specification and as directed by the departmental officers. -Single leaf of size 1.00m x 2.10m.
6Painting new iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with two coats of best approved first quality and colour of synthetic enamel paint over the existing red oxide priming coat in all floors excluding cost of priming coat etc., complete complying with standard specification and as directed by the departmental officers. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.)
7Painting Work For Wall at Gents and Ladies Picture Including of Materials and Labour charges.
8Supply and Delivery for Sanitory Pad Dust Bin
9Painting and Writing Work for Wall at Scheme Name Board, Toilet Open and Close Time with Awareness Slogan. Including of Materials and Labour charges.
10Supplying and fixing in position white / colour glazed European Water Closet of best quality and approved make with 100 mm “P” or “S” trap connecting with CI pipe of 100mm dia / PVC pipe of 110mm dia, double flapped rigid PVC black seat and seat cover with CP brass hinges including cost of white cement, cement for packing, spun yarn,teak wood plugs, brass screws, etc., including supplying and fixing 10 litres capacity PVC / 12.5 litres capacity porcelin low level flushing tank with a pair of CI brackets, etc., complete with all fittings such as 15mm brass ball valve with polythene float with brass handle, union, coupling connected by means of 40mm white PVC flush hand using Indian adopter joint including all internal fittings such as 15mm brass connections, 15mm GM wheel valve, 15mm brass nipple (2 Nos.), 15mm nylon connection, TW plugs, screws and also giving necessary connection to the PVC pipe including cost of 600mm length of 110mm dia PVC pipe and painting the CI brackets with 2 coats of approved paint over one coat of red oxide primer, dismantling the masonry and re-doing the dismantled masonry to original condition etc. complete complying with standard specifications. (The EWC and flushing tank wiht all accessories should be got approved by the Executive Enginer before use on works)
11Supply and fixing of Urinal Tub Delivery 50mm dia PVC Pipe Line Laying(151.90+23.53) Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 57565371
AUTHORITY Local Bodies
TENDER VALUE 2.20 Lakhs
LAST DATE 06-10-2026
Authority
Authority Name Municipal Adminitration And Water Supply Department
Work Description Tender for Maintenance Work Of Community Toilet In Polur Municipality.
Basic Detail
Tender No 1001/2026/E1
Bidding Type Tender
Location
City Tiruvannamalai
State Tamil Nadu
Key Dates
Publish Date 17 Sep 2026
Submission Date 06 Oct 2026
Open Date 06 Oct 2026
Finance
Tender Value 2.20 Lakhs
Tender Fee Ref. Documents
EMD 4400
Exemption Not Available
Document List
BOQ_848037.xls
d16ac6c6-9ea2-42f1-9838-fce61c50ec9d.html
TenderNotice.pdf
Tendernotice_1 (20).pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Sep 17, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Oct 06, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 2 days
Oct 06, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 2 days

Tender Documents

Download All (ZIP) ↓
xls

BOQ_848037.xls

html

d16ac6c6-9ea2-42f1-9838-fce61c50ec9d.html

pdf

TenderNotice.pdf

pdf

Tendernotice_1 (20).pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders