Public Administrative Department Local Bodies Closing in 4 days TDR #57565311

Tender For Construction Of Baghnath River Front Area, Site Development, Municipal Council, Bageshwar.

Issued by Local Bodies · Bageshwar, Uttarakhand
Tender Value
Ref. Documents
Estimated cost
Bid Submission
29 Sep 2026
4 days left
EMD
1.73 Lakhs
Bank guarantee accepted
Document Fee
5500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Bageshwar → Uttarakhand
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender For Construction Of Baghnath River Front Area, Site Development, Municipal Council, Bageshwar.

BOQ

Name of Work:- CONSTRUCTION OF BAGHNATH RIVER FRONT AREA, SITE DEVELOPMENT, Municipal Council, BAGESHWAR.
Sl. No. Item Description
1Earth Work
2Demolishing work manually/ by mechanical means, including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per the direction of the Engineer-in-Charge.
3Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil.
4Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.
5Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete.
6Surface dressing of the ground including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m.
7CONCRETE WORK (PCC)
8Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size)
9Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size)
10Providing and fixing at or near ground level precast cement concrete in kerbs, edgings etc. as per approved pattern and setting in position with cement mortar 1:3 (1 Cement : 3 coarse sand), including the cost of required centering, shuttering complete.1:1½:3 (1 Cement: 1½ coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size). Kerb Stone
11Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III): 4 graded stone aggregate 12.5mm nominal size) (DPC)
12RENFORCED CEMENT CONCRETE WORK (RCC)Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge. (Note :- Cement content considered in this item is @ 330 kg/cum. Excess/ less cement used as per design mix is payable/recoverable separately).
13All works upto plinth level
14All works above plinth level upto floor V level
15Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more.
16Centering and shuttering including strutting, propping etc. and removal of form for : Columns, Pillars, Piers, Abutments, Posts and Struts
17Centering and shuttering including strutting, propping etc. and removal of form for : Lintels, beams, plinth beams, girders, bressumers and cantilevers
18MASONARY AND PLASTER WORK
19Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand)
20Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand)
2112 mm cement plaster of mix : 1:6 (1 cement: 6 fine sand)
22Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding
23FINISHING & PAINTING WORK
24Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : New work (two or more coats) over and including water thinnable priming coat with cement primer
25Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)
26Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture
27Chequered terrazo tiles 22 mm thick with graded marble chips of size up to 6 mm in floors, jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing and polishing complete, on 20 mm thick bed of cement mortar 1 : 4 (1 cement :4 coarse sand):
28FINISHING & PAINTING WORK
29Construction of Water Bound Macadam using locally available material (Table 400.13) Providing, laying spreading and compacting local material in block or large discrete particles, such as kankar, Laterite, Dhandla etc. as per Table 400.13 to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with three wheel 80-100 kN static roller in stages to proper grade and camber, applying and brooming requisite type of screening /binding materials to fill-up the interstices of laid material watering and compacting to the required density as per Clause 405.3 and Technical Specification Cluase 408.
30WBM Grading 3Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 3 as per Technical Specification Clause 405. By Mechanical Means
31Providinng and laying of factory made Coloured Rubber molded antiskid shot Blast Concrete Block of. M-10 Gtrade having thkness 80 mm over 30mm thick sand bed in footpath, Parks, lawns, drive ways parking etc. of required Strength, thickness & Size shape, as per drawing & apporned by Engines in charge, complet in all Respect.
32Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge.
33Sand filling in plinth including supply of necessary quantity of Sand from a distance not exceeding 8km from the site of work & including Watering dressing etc. Rate to include cost of all materials, labour and T & P etc. required for proper completion of the work.
34Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 grad size) upto plinth level with :ed stone aggregate 20 mm nominal size) upto plinth level with :Cement mortar 1:6 (1 cement : 6 coarse sand)
35Painting of new iron and wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.80 ltr/10 sqm of approved brand and manufacture.
36Mild steel or iron in plain work in heavy size such as trusses, built up gates record racks , roof works gates etc.wrought to requre from including drilling holes riveting or wending whewre necessary and their fixing required for proper completion of work.
37Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, i/c making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall :
3815 mm dia nominal bore
3920 mm dia nominal bore
40Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc.
4125 mm dia nominal bore
42Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : 15 mm nominal bore
43Providing and fixing C.P. brass long body bib cock ofapproved quality conforming to IS standards and weighing not less than 690 gms. - 15 mm nominal bore
44Providing and fixing C.P. brass angle valve for basinmixer and geyser points of approved quality conforming to IS:8931- 15mm nominal bore
45Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Flexible pipe - 32 mm dia
46Providing and fixing uplasticised PVC connection pipewith brass unions : 45 cm length - 15 mm nominal bore
47Providing and fixing ball valve (brass) of approvedquality, High or low pressure, with plastic floats complete : 20 mm nominal bore
48Providing and fixing brass stop cock of approvedquality : 20 mm nominal bore
4925 mm nominal bore
50Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid
51Providing and fixing toilet paper holder : C.P. brass
52Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests
53Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps
54Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.
55Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Rectangular shape 453x357 mm
56Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
57Providing and fixing M.S. holder-bat clamps of approved design to Sand Cast iron/cast iron (spun) pipe embedded in and including cement concrete blocks 10x10x10 cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including cost of cutting holes and making good the walls etc. : For 100 mm dia pipe
58Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms.
59Providing and fixing PTMT soap Dish Holder havinglength of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms.
60Providing and fixing PTMT extension nipple for water tank pipe, fittings of approved quality and colour. 20 mm nominal bore, weighing not less than 40 gms
61Providing and fixing PTMT grating of approved quality and colour. Circular type
62100 mm nominal dia
63125 mm nominal dia with 25 mm waste hole
64P&F - Trap 75 mm bend
65P&F -Trap 110 mm bend
66P&F - Coupler 75 mm bend
67P&F -Coupler 110 mm bend
68P&F - Shoe (Plain) 75 mm bend
69P&F -Shoe (Plain) 110 mm bend
70P&F- Trap 75 mm bend
71P&F -Trap 110 mm bend
72P&F Single tee with door - 75x75x75 mm
73P&F Single tee with door - 110x110x110 mm
74Providing and fixing on wall face unplasticised Rigid PVC rain water - 75 mm diameter
75Providing and fixing on wall face unplasticised Rigid PVC rain water - 110 mm diameter
76Providing and fixing on wall face unplasticised Rigid PVC rain water - 110 mm diameter + 150 mm diameter S.W. pipe (305.05+999.15 = 1304.20)
77ELECTRICAL WORK
78Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.
79Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and re-filling etc. as required.
80Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.
81Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/submain wiring/ cable as required.
82Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.
83Upto 35 sq. mm
84Above 35 sq. mm and upto 95 sq. mm
85Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 3½ X 70 sq. mm (38mm)
86Providing, laying and fixing following dia G.I. pipe (medium class) in ground complete with G.I. fittings including trenching (75 cm deep)and re-filling etc as required 50 mm dia
87Supply, Installation, Testing and Commissioning of LED RGB/RGB W flood lighting luminaire for facade lighting with Die-cast aluminium housing,powder-coated finish.
88LANDSCAPE WORK
89Preparation of beds for hedging and shrubbery by excavating 60 cm deep and trenching the excavated base to a further depth of 30 cm, refilling the excavated earth after breaking clods and mixing with sludge or manure in the ratio of 8:1 (8 parts of stacked volume of earth after reduction by 20% one part of stacked volume of sludge or manure after reduction by 8%), flooding with water, filling with earth if necessary, watering and finally fine dressing, leveling etc. including stacking and disposal of materials declared unserviceable and surplus earth by spreading and leveling as directed, within a lead of 50 m, lift up to 1.5 m complete (cost of sludge, manure or extra earth to be paid for separately)
90Digging holes in ordinary soil and refilling the same with the excavated earth mixed with manure or sludge in the ratio of 2:1 by volume (2 parts of stacked volume of earth after reduction by 20% : 1 part of stacked volume of manure after reduction by 8%) flooding with water, dressing including removal of rubbish and surplus earth, if any, with all leads and lifts (cost of manure, sludge or extra good earth if needed to be paid for separately) Holes 90 cm dia, and 90 cm deep Details of cost for 1 hole
91Providing and Displaying Fishtail palm well developed with fresh & healthy foliage leaves of ht 210 to 240cm Specimen plant in 35 cm Cement Pot as per direction of the officer-in-charge.
92Providing and stacking of Tecoma stans of height 90- 105 cm. bushy in big size HDPE bag as per direction of the officer-in-charge.
93Providing and stacking of Thuja compacta of height 75- 90 cm., conical shaped, well formed with healthy foliage in earthen pots of size 30 cm as per direction of the officer-in-charge.
94Anti termite treatment of lawn area through premise 30.50% I P. one liter premise diluted in 499 liters water and applying solution @ 1.00 litre solution per sqm lawn or bed area.(two application) i/c cost of chemical)and as per direction of officer-in-charge.and as per direction of officer-in-charge.
95Supplying and spreading of Jamuna sand/ River sand in Lawn area, including watering, mixing and dressing complete.
96Maintenance of lawn and plants after completion of work by providing Gardener including watering etc for 01 years (365 days ) with semi skilled mali
97BOUGAINVILLEA PLANT 9\\"
98LOTA BAMBOO TREE 5'-0\\"
99DELONIX REGIO 5'-0\\"
100TABEBUIA ARGENTEA 5'-0\\"
101marrigold 9\\"
102FAX TAIL PALM 5'-0\\"
1036 Feet Juniper Tree 5'-0\\"
104daisy hybrid 5'-0\\"
105Canopy/GaziboHexagonal canopy Madse up of M.S Pipes with a seating capacity of 8 Person. Raised on a platform of 600mm high.
106GARDEN BENCHES
107Unbranded Cast Iron Powder Coating Garden Bench, Capacity 3 SeaterUnbranded Cast Iron Powder Coating Garden Bench, Capacity 3 Seater
108Rcc Garden Bench Garden Bench, Capacity 3 Seater
109Open Gym
110SURF Board
111LEG PRESS [DOUBLE]
112HORSE RIDER
113TIA CHI WHEEL
114BENCH PRESS
115AIR WALKER
116SHOULDER CHEST PRESS CHAIN
117ROWER
118ARM WHEEL DOUBLE
119MERRY GO ROUND
120ELLIPTICAL TRAINER
121CRESS WALKER
122ARCHIE OUTDOOR PALYGROUND EQUIPMENT
1233D MURALS
124Sitting Dog SG-AM12 30\\"
125Peacock SG-AM16 6Fit
126Girraffe SG-AM25 84x60
127FRP tree Dustbin SG-DB01 3.5FTX80L
128FRP RABBIT DUSTBIN SG-DB05 3.5X80L
129Benches#1 SG-DB01 3.5FTX80L
130Benches#2 SG-DB05 3.5X80L Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 57565311
AUTHORITY Local Bodies
TENDER VALUE Ref. Documents
LAST DATE 29-09-2026
Authority
Authority Name nagar palika parishad
Work Description Tender For Construction Of Baghnath River Front Area, Site Development, Municipal Council, Bageshwar.
Basic Detail
Tender No 727/Nirman work/2026-27, Dt. 14.09.2026
Bidding Type Tender
Location
City Bageshwar
State Uttarakhand
Key Dates
Publish Date 17 Sep 2026
Submission Date 29 Sep 2026
Open Date 30 Sep 2026
Finance
Tender Value Ref. Documents
Tender Fee 5500
EMD 1.73 Lakhs
Exemption Available
Document List
8c90a55b-62c0-42b0-9e39-a2b34f4e7374.html
Bid.pdf
BOQ_118173.xls
Tendernotice_1 (33).pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Sep 17, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Sep 29, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 4 days
Sep 30, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 5 days

Tender Documents

Download All (ZIP) ↓
html

8c90a55b-62c0-42b0-9e39-a2b34f4e7374.html

pdf

Bid.pdf

xls

BOQ_118173.xls

pdf

Tendernotice_1 (33).pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders