Tender For Estimate For Reconstruction Of Head Regulator Of Peori Disty Off Taking From Rd 25518-R Of Raika Feeder
Tender Value
15.30 Lakhs
Estimated cost
Bid Submission
28 Sep 2026
9 days left
EMD
30610
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Sri Muktsar Sahib → Punjab
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Estimate For Reconstruction Of Head Regulator Of Peori Disty Off Taking From Rd 25518-R Of Raika Feeder
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling brick work, tile masonry or tile lining in lime concrete / cement concrete |
| 2 | Dismantling brick work, tile masonry or tile lining in cement mortar |
| 3 | Earth work in excavation of foundation of structures as per drawing and technical specifications, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with excavated surplus soil in ordinary soil by mechanical means, depth 3.0 m to 6.0 m |
| 4 | Plain cement concrete 1:3:6 nominal mix in foundation with crushed stone aggregate 40 mm nominal size mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days |
| 5 | Plain/Reinforced Cement Concrete in sub-structure complete as per drawing and Technical Specifications – RCC Grade M20 including centering and shuttering, height up to 5 m |
| 6 | Plain/Reinforced Cement Concrete in sub-structure complete as per drawing and Technical Specifications – RCC Grade M25 with Batching Plant, Transit Mixer and Concrete Pump including centering and shuttering, height up to 5 m |
| 7 | Supplying, fitting and placing HYSD bar reinforcement in sub-structure complete as per drawing and Technical Specifications |
| 8 | Preparing, watering and ramming surface for laying concrete – Head Works – Horizontal |
| 9 | Cement concrete 1:4:8 with brick ballast 40 mm gauge, mixing by mechanical means using concrete mixer volumetric type |
| 10 | Dressing side slopes and preparation of sub-grade for lining |
| 11 | Putting 1:3 (Cement : Water) cement slurry with cement @ 2.25 kg per sq.m on prepared bed and side slopes before laying concrete on bed and side slopes |
| 12 | Earth work for lip cutting for lining of irrigation channels inclusive of all allowances, lead and dressing – 0 to 1.5 m depth |
| 13 | Earth work for lip cutting for lining of irrigation channels inclusive of all allowances, lead and dressing – depth exceeding 1.5 m but up to 3.0 m |
| 14 | Cement concrete lining 75 mm thick or less laid manually for irrigation channels using cement concrete M-15 with cement content 325 kg/cum mixed in an automatic computerized batching & mixing plant and transported to site in transit mixers with an average lead of 1 km (For trapezoidal section and cup section of all radii) |
| 15 | Polythene films/sheet of 100, 125, 150, 200 & 250 micron |
| 16 | Making dewatering arrangement by pumping set 4\\" × 4\\" (Tractor Driven) |
| 17 | Filling Shingles in Jharries |
| 18 | Providing Graded Filter Material |
| 19 | Providing & fixing in position of flat/wedge seal including preparation of surface complete in all respects (75 mm dia × 10 mm thick) |
| 20 | Providing of hollow bulb seal & fixing in position including preparation of surface complete in all respects (57/22 × 8 mm) |
| 21 | Supply, providing and fixing of galvanized bolts & nuts (for seals of all types) with washers |
| 22 | Supply, providing and fixing of CSK screw (for seals of all types) with washers |
| 23 | CI housing cover with worm & worm wheel assembly, shaft, handle, gun metal bush with triple start threading, 0.75 Ton capacity |
| 24 | MS spindle with double/triple start threading 1/3/4\\" dia complete up to 1.5 Ton capacity |
| 25 | Supply and fixing of spindle cover |
| 26 | Fixing and holding the gate with the help of 35 Ton capacity crane |
| 27 | Commissioning & testing of gates at site complete in all respects and to entire satisfaction of Engineer In charge |
| 28 | Providing & fixing clamp plate complete in all respects |
| 29 | Painting of gate leaf with primer coat and two coatswith Anti corrosive Bitumastic paint to give an even shade with special quality paint. |
| 30 | Painting two coats with ready mix synthetic enamel paint over one coat metal primer |
| 31 | Providing and fixing skin plate |
| 32 | Providing and fixing ISMC 75 × 40 mm |
| 33 | Providing and fixing ISA 30 × 30 × 5 mm |
| 34 | Providing and fixing MS square bar 16 × 16 mm |
| 35 | Providing and fixing stainless steel flat |
| 36 | Providing and fixing ISMB 100 × 50 mm |
| 37 | Providing and fixing anchor |
| 38 | Threading of J-bolt complete in all respects (up to 75 mm) |
| 39 | Providing and fixing ISMC 150 × 75 mm |
| 40 | Providing and fixing SHS |
| 41 | Fillet welding with high strength steel rods complete in all respects (6 mm) |
| 42 | Drilling/Boring hole including rimming complete in all respects and to entire satisfaction of engineer in charge |
| 43 | Supply of multi-purpose synthetic grease |
| 44 | Supply of Mobil oil |
| 45 | Machining of anchor bolt to give shape complete in all respects |
| 46 | Providing & fixing pin in position complete in all respects |
| 47 | Providing & fixing chequered plate 6 mm |
| 48 | Providing and fixing ISA 40 × 40 × 4 mm |
| 49 | Providing and fixing ISA 65 × 65 × 6 mm |
| 50 | Providing and fixing GI Pipe 50 NB |
| 51 | Providing and fixing plates Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 17, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 28, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 9 daysSep 28, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender