Tender For Construction Of Community Sanitary Complex At Near Periyakandiyammal Kovil In Srinivasanallur Panchayat
Tender Value
Ref. Documents
Estimated cost
Bid Submission
06 Oct 2026
2 days left
EMD
6000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Tiruchirappalli → Tamil Nadu
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Construction Of Community Sanitary Complex At Near Periyakandiyammal Kovil In Srinivasanallur Panchayat
BOQ
| Sl. No. | Item Description |
| 1 | Earth work excavation and depositing on bank with intial lead and lift in all clasuses of soil such as Hard Gravely soil, Gravely soil except Hard Rock requiring Blasting etc complete as per SS20B for narrow foundation |
| 2 | Supplying and Filling in Basement Filling with M Sand in layers not more than 15 cm thick , well ramed and consolidated complying with standard specification |
| 3 | Cement Concrete 1:4:8 mix using 40mm ISS HBG stone jelly and M.Sand for Foundation and flooring including cost,conveveyance of all materials and labour charges to laid in layers not more than 15cm thick, well rammed etc, complete with standard specification |
| 4 | Supplying and Erection centering for sides and soffiots including necessaary supports and strutting as directed by the departmental officers. Rate for 10m2 for the following items (RCC floor slab, roff slab, Rectangular / Square, Tee/ Ell beams, Lintels, StairCase Waist Slablanding slab landing beam Canopy etc in all floors with all cross Bracings using mild steel sheets of size 90cm x 60cm and 10BG stiffened withmild steel angles of size 25mmx3mm for boarding laid over country wood joists of size 10cmx6.50cm spaced at about 90cm centre to centre and supported by Casurina props of 10cm to 13cm dia spaced at 75cm centre etc, complete and as directed. |
| 5 | Above GL |
| 6 | Supplying, Fabricatung and placin g in position of RTS or MS rod for all reinforced cement concrete works as per design given including cost of steel and binding wire in all floors etc,complete complying with standard specification |
| 7 | Reinforced cement concrete in 1 : 1.5 : 3 , mix using 20mm iss HBG stone jelly and M.Sand for all reinforced cement concrete works excluding cost of centering and stell but including laying,vibrating, curing and finishing ,fixing fan clamps in the RCC floor and roof slab works wherevver necessery and bearing surface of the wall at the sides and bottom of the slab, beam shall be finished smooth with cement mortor 1:3 and craft paper without claiming extra cost., complete compying with standard specification and as directed by the departmental officers |
| 8 | Brick work in Cement mortor 1:5 (one cement, and five sand) using Country Bricks of size 23cm x 11cm x 7cm and M.Sand for the following including curing etc., complete complying with standard specifications cost conveyance of all materials and labour charges etc complete. |
| 9 | Plastering with Cement Mortor 1:5,12mm thick with M.Sand including cost and conveyance of all materials and labour charges including curing etc., complete complying with standard specification as directed by the departmental officers |
| 10 | Supplying and applying of two coats of putty of 3mm thick over the exposed RCC surface of ceiling including finishing the joints smoothy with grinding machine and the surface shall be thoroughly cleaned out of dust and scrubbing. The Surface shall then be allowed to dry for atleast 48 hours. It shall then be sand papered (waterproof abrasive sheet) to give a smooth and even surface. Any unevenness shall be made good by applying 1st coat of putty mixed with water on the entire surface including filling up the undulations and applying 2nd coat of putty after 6 hours of 1st coat of putty and then sand papering (waterproof abrasive sheet) the same after it is dry and finishing the surface smoothly, etc., complete complying with standard specifications |
| 11 | Flooring with following ceramic tiles of size 200 x 200 x 6 mm laid over 20 mm thick cement mortar 1:3 (One Cement and Three M.Sand) base mortar over the existing slab / floor including cutting the tiles to the required size with special cutter wherever necessary, laying in position and pointing with white cement mixed with colouring pigment at the rate of 0.3 Kg. / sq.m. etc., complete complying with standard specification. (The make and brand of the tiles should be got approved by Executive Engineer before use on works) |
| 12 | Dadooing of walls with glazed tiles of size 15 cm x15cmx6mm laid in CM 1:2, 10mm thick & pointing with white cement using 0.4kg/cm2 -10Sqm |
| 13 | Weathering course in brick jelly lime concrete using broken brick jelly of size 20mm uniform gauge in pure slaked lime (no crushed stone M.Sand to be used) to the proportion of brick jelly to lime being 32:12.5 by volume and laid over the RCC roof slab in a single layer of required slope and finished by beating the concrete with wooden beaters of approved pattern, keeping the surface constantly wet by sprinkling lime jaggery water, etc., complete as per standard specification and as directed by the deparmental officers. |
| 14 | Finishing the top of roof with one course of machine pressed tiles of size 230mm x 230mm x 20mm of approved quality set in Cement Mortar 1:3 (One Cement and Three Crushed stone M.Sand) 12mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete complying with standard specification and as directed by the departmental officers |
| 15 | Supplying and fixing in position best quality and approved make Indian made white / colour glazed earthernware wash hand basin of size 550 x 400mm (with pedestal / without pedestal) with a pair of cast iron brackets, including cost 15mm dia brass CP pillar tap, 32mm dia \\"B\\" class GI waste pipe with rubber plug and chain, 15mm dia GM wheel valve, 15mm brass nipple, 15mm dia nylone connection, 32mm dia CP brass waste coupling including fixing of wash basin using CI brackets on to the wall in position with TW plugs and screws, rubber washers, white lead and giving necessary water supply connection and painting the brackets with two coat of painting over a priming coat of anti-corrosive paint including testing for leakages etc., complete complying with standard specification and as directed by the departmental officers. (The wash hand basin and specials should be got approved by the Executive Engineer before use on works). |
| 16 | Supply of Steel Door of size 0.75 m x 2.10 m etc |
| 17 | Supply of WPC Door of size 1.20 m x 2.10 m etc |
| 18 | Supply of Jolly of size 0.60 m x 0.45 m etc |
| 19 | Supply and Fixing of IWC |
| 20 | Supply and Fixing of EWC |
| 21 | Supply and Fixing og RCC Ring 1.50 dia |
| 22 | Cover Slab |
| 23 | 2000 lit HDPE tank |
| 24 | Saniotory arrangements 110mm dia pvc pipe |
| 25 | 110mm dia pvc Door Elbow |
| 26 | 110mm dia pvc TEE |
| 27 | 110mm dia pvc Bend |
| 28 | 32mm dia pvc pipe |
| 29 | 32mm dia pvc bend |
| 30 | 32mm dia pvc Elboe |
| 31 | 32mm dia pvc Tee |
| 32 | 32mm dia pvc balvalue |
| 33 | 32mm dia Gi Tap |
| 34 | Cost and Supplying and fixing in precast RCC ring labour charges,etc., |
| 35 | Brick jelly 20mm size for filling soak pit inner etc., complete complying with standard specifiction. |
| 36 | Granolithic floor finish of 25 mm thick in PCC 1:2:4 using 10-12 mmHBGS Jelly inculding curing etc |
| 37 | Distembering Two Coats with best approved Oil Bound Distember including cost of Painting with Primer Coat over new plastered surface and conveyance of all materils to site and all labour charges etc complete |
| 38 | Painting Two Coats with approved Exterior Emulsion over one coat of Primer Coat over plastered wall surface , ceiling and other new surface including cleaning , preparing the surface,curing,scaffolding charges etc, complete. |
| 39 | GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column \\"BB\\" for all works in this package} Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 17, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 06, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysOct 06, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender