Tender For Work Related To Pipe Line Maintenance And Reservour Cleaning & Maintenance Work Under Sub Division-Kherwara
Tender Value
10 Lakhs
Estimated cost
Bid Submission
28 Sep 2026
3 days left
EMD
20000
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Udaipur → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Work Related To Pipe Line Maintenance And Reservour Cleaning & Maintenance Work Under Sub Division-Kherwara
BOQ
| Sl. No. | Item Description |
| 1 | Repairing of leakage in existing Distribution/Rising Main/Transmission Main AC/PVC/HDPE pipe line up to 1.5 mtr depth of sizes as given below by digging out suitable size of pit at site of work including dewatering and providing adequate safety arrangement at site. This will also include cutting of pipe ends, fixing of pipe piece with jointing material to make repair leak proof and then refilling of excavated trench/pit/road shall be done properly i.e. after a layer of 20cm with propoer watering and ramming in layers. For entire job contractor will use his own T&P & labour and will arrange transportation of material required from store. (Required material such as pipe piece, CID Joints shall be provided by Department free of cost) |
| 2 | In all type Soil AC/PVC/HDPE pipe |
| 3 | 50/63/75mm |
| 4 | 80/90mm |
| 5 | 100/110mm |
| 6 | 125/140mm |
| 7 | 150/160/180mm |
| 8 | 200/225mm |
| 9 | 250/280mm |
| 10 | 300/315mm |
| 11 | 350mm |
| 12 | 400mm |
| 13 | Add 5 % on above item no. 1.1 for B.T. Road |
| 14 | Add 15% on above item no. 1.1 for C.C. Road . Pit in CC Road shall be cut in optimum size through CC cutter machine only. |
| 15 | Add 20% on above no. 1.1 item if depth of pipeline is above 1.5 mtr and up to 3.0 mtr. |
| 16 | Add 30% on above no. 1.1 item if depth of pipeline is above 3.0 mtr. |
| 17 | Repairing of leakage in existing Distribution/Rising Main/Transmission Main CI/MS/DI pipe line up to 1.5 mtr depth of sizes as given below by digging out suitable size of pit at site of work including dewatering and providing adequate safety arrangement at site. This will also include cutting of pipe ends, fixing of pipe piece with jointing material to make repair leak proof and then refill the pit from excavated sand by ramming it at sides of pipe & upto ground level for entire job contractor will use his own T&P & labour and will arrange transportation of required material from store. (Required material such as pipe piece CID Joints shall be provided by Department free of cost) |
| 18 | In all type Soil |
| 19 | 100mm |
| 20 | 125mm |
| 21 | 150mm |
| 22 | 200mm |
| 23 | 250mm |
| 24 | 300mm |
| 25 | 350mm |
| 26 | 400mm |
| 27 | Add 5% on above item no. 1.2 for B.T. Road |
| 28 | Add 15% on above item no. 1.2 for C.C. Road . Pit in CC Road shall be cut in optimum size through CC cutter machine only. |
| 29 | Add 20% on above no. 1.2 item if depth of pipeline is above 1.5 mtr and up to 3.0 mtr. |
| 30 | Add 30% on above no. 1.2 item if depth of pipeline is above 3.0 mtr. |
| 31 | Minor repair of leakages such as lead caulking, plugging, clamping and ring fixing in existing Distribution/Rising Main/Transmission Main AC/PVC/HDPE/CI/MS/DI pipe line up to 1.5 mtr depth of sizes as given below by digging out suitable size of pit at site of work including dewatering and providing adequate safety arrangement at site to make repair leak proof and then refill the pit from excavated sand by ramming it at sides of pipe & upto ground level for entire job contractor will use his own T&P & labour and will arrange transportation of required material from store. (Required material such as lead wool, white hump, plugs, clamps etc. shall be provided by Department free of cost) |
| 32 | In all type Soil |
| 33 | 50/63/75mm |
| 34 | 80/90mm |
| 35 | 100/110mm |
| 36 | 125/140mm |
| 37 | 150/160/180mm |
| 38 | 200/225mm |
| 39 | 250/280mm |
| 40 | 300/315mm |
| 41 | 350mm |
| 42 | 400mm |
| 43 | Add 5% on above item no. 1.3 for B.T. Road |
| 44 | Add 15% on above item no. 1.3 for C.C. Road . Pit in CC Road shall be cut in optimum size through CC cutter machine only. |
| 45 | Add 20% on above no. 1.3 item if depth of pipeline is above 1.5 mtr and up to 3.0 mtr. |
| 46 | Add 30% on above no. 1.3 item if depth of pipeline is above 3.0 mtr. |
| 47 | Replacement of CI/ DI Double flange sluice valves, non return valves, butter fly valves etc. in existing Distribution/Rising Main/Transmission Main pipe line up to 1.5 mtr depth of sizes as given below by digging out suitable size of pit at site of work including providing and fixing MS Nut and Bolt and rubber gasket, dewatering and providing adequate safety arrangement at site and then refill the pit from excavated sand by ramming it at sides of pipe & upto ground level for entire job contractor will use his own T&P & labour and will arrange transportation of required material from store. (Required material such as Valve, Tail piece, CID Joints etc. shall be provided by Department free of cost) |
| 48 | In all type Soil |
| 49 | 80 mm |
| 50 | 100 mm |
| 51 | 125 mm |
| 52 | 150 mm |
| 53 | 200 mm |
| 54 | 250 mm |
| 55 | 300 mm |
| 56 | 350 mm |
| 57 | 400 mm |
| 58 | Add 5% on above item no. 1.4 for B.T. Road |
| 59 | Add 15% on above item no. 1.4 for C.C. Road . Pit in CC Road shall be cut in optimum size through CC cutter machine only. |
| 60 | Add 20% on above item no. 1.4 if depth of pipe line is above 1.5 mtr to 3.0 mtr |
| 61 | Deduct 20% on above item no. 1.4 if valve is fixed at plinth level / platform i.e. no excavation is required |
| 62 | Removal of Choking from pipe line, including tree roots, malba, sand and other by manually or other means, cleaning of line and testing in existing Distribution/Rising Main/Transmission Main AC/PVC/HDPE/uPVC pipe line up to 1.5 mtr depth of sizes as given below by digging out suitable size of pit at site of work including dewatering and providing adequate safety arrangement at site. This will also include cutting of pipe ends, fixing of pipe piece with jointing material and then refill the pit from excavated sand by ramming it at sides of pipe & upto ground level for entire job contractor will use his own T&P & labour and will arrange transportation of required material from store. (Required material such as pipe piece CID Joints shall be provided by Department free of cost)as per satisfaction of EIC. Rates for per pit. |
| 63 | In all type Soil |
| 64 | 75 mm |
| 65 | 90/80 mm |
| 66 | 110/100 mm |
| 67 | 140/125 mm |
| 68 | 180/160/150 mm |
| 69 | 225/200 mm |
| 70 | 250 mm |
| 71 | 300 mm |
| 72 | Add 5% on above item no. 1.5 for B.T. Road |
| 73 | Add 15% on above item no. 1.5 for C.C. Road . Pit in CC Road shall be cut in optimum size through CC cutter machine only. |
| 74 | Add 20% on above item no. 1.5 if depth of pipe line is above 1.5 mtr and up to 3.0 mtr. |
| 75 | Add 30% on above item no. 1.5 if depth of pipe line is above 3.0 mtr. |
| 76 | Removal of Choking from pipe line, including tree roots, malba, sand and other by manually or other means, cleaning of line and testing in existing Distribution/Rising Main/Transmission Main CI/MS/DI pipe line up to 1.5 mtr depth of sizes as given below by digging out suitable size of pit at site of work including dewatering and providing adequate safety arrangement at site. This will also include cutting of pipe ends, fixing of pipe piece with jointing material and then refill the pit from excavated sand by ramming it at sides of pipe & upto ground level for entire job contractor will use his own T&P & labour and will arrange transportation of required material from store. (Required material such as pipe piece CID Joints shall be provided by Department free of cost)as per satisfaction of EIC. Rates for per pit. |
| 77 | In all type Soil |
| 78 | 80 mm |
| 79 | 100 mm |
| 80 | 125 mm |
| 81 | 150 mm |
| 82 | 225/200 mm |
| 83 | 250 mm |
| 84 | 300 mm |
| 85 | Add 5% on above item no. 1.6 for B.T. Road |
| 86 | Add 15% on above item no. 1.6 for C.C. Road . Pit in CC Road shall be cut in optimum size through CC cutter machine only. |
| 87 | Add 20% on above item no. 1.6 if depth of pipe line is above 1.5 mtr up to 3.0 mtr. |
| 88 | Add 30% on above item no. 1.6 if depth of pipe line is above 3.0 mtr |
| 89 | Disconnection of water connection from existing pipe line in all type of soils up to 1.5 mtr depth by digging out suitable size of pit at site of work, with cutting of service line and refixing of clamp revolving it 180 degree refill the pit from excavated sand by ramming it & upto ground level for entire job contractor will use his own T&P & labour. |
| 90 | Add 5% on above item no. 1.7 for B.T. Road |
| 91 | Add 15% on above item no. 1.7 for C.C. Road . Pit in CC Road shall be cut in optimum size through CC cutter machine only. |
| 92 | Add 20% on above item no. 1.7 if depth of pipe line is above 1.5 mtr and up to 3.0 mtr |
| 93 | Removal of sluice valve in existing pipe line up to 1.5 mtr depth by digging out suitable size of pit at site of work including dewatering and providing adequate safety arrangement at site. This will also include cutting of pipe ends, fixing of pipe piece with jointing material to make repair leak proof and then refill the pit from excavated sand by ramming it at sides of pipe & upto ground level for entire job contractor will use his own T&P & labour and will arrange transportation of required material from store. (Required material such as pipe piece CID Joints shall be provided by Department free of cost) |
| 94 | In all type Soil |
| 95 | 80 mm dia pipe to 100mm |
| 96 | 125 mm dia pipe to 150mm |
| 97 | 200 mm dia pipe to 250mm |
| 98 | 300 mm dia pipe to 350mm |
| 99 | 400mm |
| 100 | Add 5% on above item no. 1.8 for B.T. Road |
| 101 | Add 15% on above item no.1. 8 for C.C. Road . Pit in CC Road shall be cut in optimum size through CC cutter machine only. |
| 102 | Add 20% on above item no. 1.8 if depth of pipe line is above 1.5 mtr and up to 3.0 mtr |
| 103 | Work of Inter Connection in AC/PVC/HDPE pipe line up to 1.5 mtr depth by digging out suitable size of pit at site of work including dewatering and providing adequate safety arrangement at site, cutting of existing pipeline, jointing of Tee (complete) and other specials to make inter connection repair leak proof and then refill the pit from excavated sand by ramming it at sides of pipe & upto ground level for entire job contractor will use his own T&P & labour and will arrange transportation of material required from store. (Material such as Tee/ Tee Clamp/rubber sheet/ CID joints required for inter connection shall be provided by the department free of cost). |
| 104 | In all type Soil |
| 105 | 80 mm to 110 mm |
| 106 | 125 mm to 165 mm |
| 107 | 200 mm to 300 mm |
| 108 | Add 5% on above item no. 1.9 for B.T. Road |
| 109 | Add 15% on above item no. 1.9 for C.C. Road . Pit in CC Road shall be cut in optimum size through CC cutter machine only. |
| 110 | Add 20% on above item no. 1.9 if depth of pipe line is above 1.5 mtr and up to 3.0 mtr |
| 111 | Work of Inter Connection in CI/DI/MS pipe line up to 1.5 mtr depth by digging out suitable size of pit at site of work including dewatering and providing adequate safety arrangement at site, cutting of existing pipeline, jointing of Tee (complete) and other specials to make inter connection repair leak proof and then refill the pit from excavated sand by ramming it at sides of pipe & upto ground level for entire job contractor will use his own T&P & labour and will arrange transportation of material required from store. (Material such as Tee/ Tee Clamp/rubber sheet/ CID joints required for inter connection shall be provided by the department free of cost). |
| 112 | In all type Soil |
| 113 | 80 mm to 100 mm |
| 114 | 125 mm to 150 mm |
| 115 | 200 mm to 300 mm |
| 116 | 350 mm to 450 mm |
| 117 | 500 mm to 600 mm |
| 118 | Add 5% on above item no. 1.10 for B.T. Road |
| 119 | Add 15% on above item no. 1.10for C.C. Road . Pit in CC Road shall be cut in optimum size through CC cutter machine only. |
| 120 | Add 20% on above item no. 1.10 if depth of pipe line is above 1.5 mtr and up to 3.0 mtr |
| 121 | Labour charges for removal of complaint of polluted water supply to the consumers |
| 122 | Survey of the locality of polluted water supply for preliminary assessment of source of pollution during supply hours |
| 123 | Labour charges for digging of pit of suitable size for removal of water pollution on existing distribution AC/PVC/uPVC/HDPE pipe lines up to 1.5 mtr depth including cutting of pipe and assessment of direction of flow of polluted water during non supply hours, identifying the source of pollution and repairing of fault in pipe line by fixing of pipe piece with jointing material (pipe and jointing material shall be supplied by department) to make it leak proof and then refilling the pit from excavated sand by ramming it at site of pipe upto ground level. The rate includes all labour charges to complete the work for pipe size |
| 124 | In all type Soil |
| 125 | 50 to 75 mm |
| 126 | 80-110 mm |
| 127 | 125 to 165 mm |
| 128 | 200 to 300 mm |
| 129 | 350 to 400 mm |
| 130 | Add 5% on above item no.1.12 for B.T. Road |
| 131 | Add 15% on above item no. 1.12 for C.C. Road . Pit in CC Road shall be cut in optimum size through CC cutter machine only. |
| 132 | Add 20% on above item no. 1.12 if depth of pipe line is above 1.5 mtr and up to 3.0 mtr. |
| 133 | Labour charges for digging of pit of suitable size for removal of water pollution on existing distribution CI/DI/MS pipe lines up to 1.5 mtr depth including cutting of pipe and assessment of direction of flow of polluted water during non supply hours, identifying the source of pollution and repairing of fault pipe line by fixing of pipe piece with jointing material (pipe and jointing material shall be supplied by department) to make it leak proof and then refilling the pit from excavated sand by ramming it at site of pipe upto ground level. The rate includes all labour charges to complete the work for pipe size |
| 134 | In all type Soil |
| 135 | 80-100 mm |
| 136 | 125 to 150 mm |
| 137 | 200 to 300 mm |
| 138 | 350 to 400 mm |
| 139 | Add 5% on above item 1.13 for B.T. Road |
| 140 | Add 15% on above item no. 1.13 for C.C. Road . Pit in CC Road shall be cut in optimum size through CC cutter machine only. |
| 141 | Add 20% on above item no.1.13 if depth of pipe line is above 1.5 mtr and up to 3.0 mtr. |
| 142 | Restoration of bitumen road by patch work of WBM using crushed / broken aggregate as per the standard specification and consolidation with hand rammer spreading and consolidation of binding material , cleaning of surface of WBM and providing of seal & tack coat as per site condition by using ready cold mix up to the satisfaction of engineer in charge. The rate includes the making of pit in regular shape, all labour, material and T&P charge complete job. |
| 143 | Restoration of cement concrete road including making of pit in regular shape, ramming and consolidation of surface, laying, positioning and compacting cement concrete ( M-20 ) minimum thickness 200 mm upto the satisfaction of engineer incharge. The rate includes the making of pit in regular shape, all labour, material and T&P charge complete job. |
| 144 | Cleaning of Ground water reservoir ( GLR's) of below mentioned capacity including removal of all silt from reservoir, scrapping of wall, disinfection of reservoir after cleaning and disposal of silt up to 1.00 Km lead and painting the date of cleaning on the reservoir. |
| 145 | up to 10 Kl |
| 146 | 11 to 15 KL |
| 147 | 16 to 20 KL |
| 148 | 21 to 25 KL |
| 149 | 26 to 30 KL |
| 150 | 31 to 50 KL |
| 151 | 51 to 100 KL |
| 152 | 101 to 200 KL |
| 153 | 201 to 300 KL |
| 154 | Cleaning of Clear water reservoirs ( CWR's) of below mentioned capacity including removal of all silt from reservoir, scrapping of walls, disinfection of reservoir after cleaning and disposal of silt up to 1.00 Km lead and painting the date of cleaning on the reservoir. |
| 155 | up to 10 Kl |
| 156 | 11 to 15 KL |
| 157 | 16 to 20 KL |
| 158 | 21 to 25 KL |
| 159 | 26 to 30 KL |
| 160 | 31 to 50 KL |
| 161 | 51 to 100 KL |
| 162 | 101 to 200 KL |
| 163 | 201 to 300 KL |
| 164 | 301 to 400 KL |
| 165 | 401 to 500 KL |
| 166 | Cleaning of Over Head Service Reservoir ( OHSR ) of below mentioned capacity including removal of all silt from reservoir, scrapping of walls, disinfection of reservoir after cleaning and disposal of silt up to 1.00 Km lead and painting the date of cleaning on the reservoir. |
| 167 | 50 to 100 KL |
| 168 | 101 to 200 KL |
| 169 | 201 to 300 KL |
| 170 | 301 to 400 KL |
| 171 | 401 to 500 KL |
| 172 | 501 to 600 KL |
| 173 | Replacement of existing wire mesh on ventilators of GLRs, OHSRs, CWRs etc. with 16 mm dia MS vertical bars placed at 10 cms wherever required, having 16-gauge wire mesh with a inner base of expanded jali welded around with vertical bars |
| 174 | Taking out with care the M.S. iron ladder fixed at OHSR , repairing, welding etc and fixing back at reservoirs including all labour and material. |
| 175 | Replacement of existing copper float dia 300 mm and iron counter weight for water level indicator |
| 176 | Cleaning of PHED Campus (Includes Removal of garbage, Cleaning of light jungle and maintaining the area and disposal of all garbage outside Approved disposal place of Concern local bodies. |
| 177 | Providing, fabrication and fixing mainhole cover 600X600 size made of angles 50X50X6 mm frame,40X40X5 mm frame of cover, 6 mm thick MS sheet with holdfast and fittings complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide With lock (minimum weight 50 Kg) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 17, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 28, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysSep 29, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender