Tender For Construction Of New Borewell @ Ward.No.35 Pasumpon Nagar And Colony Street In Aruppukottai Municipality. Estimate Amount Rs.6.00 Lakhs.
Tender Value
6 Lakhs
Estimated cost
Bid Submission
12 Oct 2026
25 days left
EMD
6000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Virudhunagar → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of New Borewell @ Ward.No.35 Pasumpon Nagar And Colony Street In Aruppukottai Municipality. Estimate Amount Rs.6.00 Lakhs.
BOQ
| Sl. No. | Item Description |
| 1 | Earth work excavation for foundation in Hard stiff clay, stiff black cotton, hard red earth, shales murram, gravel,stoney earth and earth mixed with small size boulders SS.20B and Sand, silt or other loose soil, wet sand,or silt not under water, light black cotton soil, sandy loam ordinary soil and to full depth as may be directed except in hardrock requiring blasting inclusive of shoring shuttering and baling out water and cleaning and levelling the site etc.,complete 10 cum |
| 2 | Plain Cement Concrete 1:4:8 (one cement four fine aggregates and eight coarse aggregates) using 40mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges and all incidential charges such as water providing etc., complete as per standard specification |
| 3 | Centering for soffits of RCC slabs of plane surface like lintels, beams ,etc.,including strutting 3m high using mild steel sheets of size 90cm X 60cm X and B.G 10 stiffened with M.S angles of size 25mm X 25mm X 3mm laid over silver Oak (C.W) joists of size 10cm X 6.5cm (spaced at about 90cm c/c )and supported dy casurina props of 10cm to 13cm dia (spaced of 75cm C/C) complying with standard specification and directed - 10 m 2 |
| 4 | Suppling and fabricating and placing in position MS (or) R.T.S. bar for reinforcement to all RCC works as per the design given including cost of steel and binding wire also in all floors. |
| 5 | Providing and laying in position Standardised Concrete Mix M-20 Grade in accordance with IS 456 - 2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement contenet of 325Kg/ cum and maximum water cement ratio of 0.55 including admixture (Plasticiser / super plasticiser) in recommended proportions as per IS 9103 to accelerate, related setting of concrete, improve workability without imparing strength and durability with about (5.0cum), 7730Kg of 20mm machine crushed stone jelly and with about (3.3 cum), 5156kg of 10 - 12mm machine crushed stone jelly and with about (4.79cum) 7670 kg of Crushed Stone Sand (M- Sand), but excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary without claiming extra cost etc., complete complying with standard specification and as directed by the departmental officers - Ground floor |
| 6 | Brick work in CM 1:5 (one cement & five sand) using III class ground moulded bricks of size 83/4\\"X41/4\\"X 2 3/4\\" including finishing, curing, etc., complete complying with standard specification - 100CFT Foundation & basement |
| 7 | Supplying and filling in foundation and basement with Well Gravel in layers of not more than 50cm thick well rammed watered and compacted etc., complete complying with standard specification. |
| 8 | Plastering with cement mortar (1:5) 12mm ,thick in all floors including cost and conveyance of all materilas to site and labour charges etc,complete as per standard specifications |
| 9 | Plastering with cement mortar (1:3) 10mm ,thick in all floors including cost and conveyance of all materilas to site and labour charges etc,complete as per standard specifications |
| 10 | Dadooing walls with Glazed tiles of sizes 305mm X200mm X 6mm size of approved make and quality and colour l Set in cement mortar 1:2 (one cement ,two sand) over 10 mm base layer plastering and pointing with white cement neatly as directed. |
| 11 | Supply and fixing of M.S Grills with Doors and Windows with one coat of Red oxide with Primer including all costs such as welding,grinding and fabrication charges, cost and conveyance of all materials to site etc,complete as per standard specification. |
| 12 | White washing two coats with freshly burnt shell lime white in colour in all floors including cost of lime and other materials brushes scaffolding charges etc.complete complying with standard specification and as directed. -100sq.m |
| 13 | Painting two coats with Ready Mixed Enamel Paint over the new iron works of approved quality and colour without priming coat including the cost all materials etc.,complete, in all floors. |
| 14 | Supply and fixing of TNEB meter board suitable for 32A single phase service connection with 32A fuse unit (500V) 32A neutral link and earth link (1\\" x 1/8\\" copper flat) on TW plank of size 375mm x 300mm x 19mm with supporting TW reepers of 1\\" thick an either side with painting with suitable bolt and nuts for fixing the TW plank on wall with earth connection and inter connection with 7/20 PVC insulated copper wire from EB meter to fuse unit etc., complete |
| 15 | Supply & Delivery of 32 Amps arial fuse unit including all cost etc., complete. |
| 16 | Supply & Delivery of main switch including all charges etc., complete as per standard specifications. |
| 17 | Supply and run of 2 of 4 sq.mm. (56 / 0.3) PVC insulated single core unsheathed copper conductor of 1100V on 7 / 20 GI bearer wire for service connection mains Supply and run of 4 of 6 sq.mm. (84 / 0.3) PVC insulated single core unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection by 14 SWG TC wire and making good of the concealed portion with suitable colour OVER HEAD MAINS |
| 18 | Supply and run of 2 of 4 sq.mm. (56 / 0.3) PVC insulated single core unsheathed copper conductor of 1100V grade in 25mm dia GI pipe (Class 'B') suitably bent at both ends with necessary angle iron upright and end supports for mains |
| 19 | Investigation charges for Geological survey report |
| 20 | Drilling the 150mm dia deep borewell in hard rock area including transportation charges etc., complete as per standard specification |
| 21 | Supplying and Delivery and erection of 160mm PVC casing pipe including all cost of labour charges etc., complete as per standard specifications |
| 22 | Supply and Delivery of the following HDPE pipes and specials with ISI standared specifcation |
| 23 | 1\\" HDPE Hose pipe |
| 24 | 3/4\\" HDPE Hose pipe |
| 25 | 1\\" Hose Coller |
| 26 | 3/4\\" Hose Coller |
| 27 | 1\\" Hose Clip |
| 28 | 3/4\\" Hose Clip |
| 29 | MOTOR TO BORE- 15mm GI pipe |
| 30 | 15mm GI Elbow |
| 31 | 15mm GI Coupling |
| 32 | 15mm GI Union |
| 33 | 15mm air cock |
| 34 | Supply and Delivery of the following CPVC pipes and GI pipes specials with ISI standared specifcation |
| 35 | 25mm CPVC MTA |
| 36 | 25mm GI pipe |
| 37 | 25mm CPVC Union |
| 38 | 25mm CPVC Elbow |
| 39 | 25mm CPVC pipe |
| 40 | TANK TO DELIVERY - 25mm CPVC Tank Nipple |
| 41 | 25mm CPVC FTA |
| 42 | 25mm CPVC TEE |
| 43 | 25mm CPVC Ball Valve |
| 44 | 15 mm ss Tap |
| 45 | 15 mm H Nipple |
| 46 | 25 x 15 mm Brass Elbow |
| 47 | 25 x 15 mm Brass Tee |
| 48 | Supply&delivery of HDPE 1000 liter capacity as per IS 12701 / 1996 including loading, unloading, transportation and labour charges etc., (TWAD SoR 21-22,Page 85,sl no.17.01 ) charges for fixing of the GI pipes and specials for pipe connection works including cutting, threading and fixing charges etc., |
| 49 | Supply & Delivery of DOL Starter with ISI mark including cost and conveyance of all charges etc., complete as per standard specifications |
| 50 | Supply and Delivery of 2.00HP Compressior motor |
| 51 | Labour charges for errection of 2.0HP compressor motor including all charges etc., |
| 52 | Labour charges for plumbing including all charges etc., |
| 53 | GST 18% Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 17, 2026
11:30 IST
Tender Published
Tender notice published.
TodayOct 12, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 25 daysOct 12, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 25 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender