Tender For Improvement To Swimming Pool & Provn Of Concrete R For Loading /Off-Loading Of Mt Vehicle At Afs Bidar
Tender Value
19.29 Lakhs
Estimated cost
Bid Submission
08 Oct 2026
20 days left
EMD
38596
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bidar → Karnataka
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Improvement To Swimming Pool & Provn Of Concrete R For Loading /Off-Loading Of Mt Vehicle At Afs Bidar
BOQ
| Sl. No. | Item Description |
| 1 | SCHEDULE OF WORKS |
| 2 | Taking down cement plaster on brick or stone walls etc. including racking out joints, hacking for key, scrubbing down with water etc. complete all as specified and directed. |
| 3 | Demolition of un-reinforced cement concrete of any description and in any position not otherwise specifically provided for sub base for floor tiles ,roof /chajja padding , including removing debris outside MD land complete all as specified and as directed. |
| 4 | Demolition of Brick work or PCC solid block masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars etc. but excluding ashlar facings dressed stone work and pre-cast concrete articles, including removing debris outside MD land complete all as specified and as directed. |
| 5 | Material and labour, for Pre-cast cement concrete block masonry with grade ‘C’ solid blocks exceeding 10 cm in width, having minimum compressive strength of 40 Kg / Sq cm as per IS 2185 (Part- I) 2005 and set in CM 1:6 complete all as specified and as directed. |
| 6 | Material and labour for Plain cement concrete 100 mm thick 1:3:6 type C2 (40mm graded stone aggregate) as in plinth protection, complete all as specified and directed. |
| 7 | Preparation of new steel surfaces of any description not exc 10cm width or girth not otherwise described and applying two coat of synthetic enamel paint over a coat of red oxide primer, first quality complete all as specified and as directed. |
| 8 | Material and Labour for Preparing of New plastered surface of Wall, Chajja, Roof Projection and Roof Fascia surface and applying acrylic smooth exterior paint of approved shade by mechanical sprayer (2 or more coats applying @ 1.67 litre / 10 sq m over and including priming two coats of Acrylic Smooth exterior paint of required shade over a coat of exterior primer applied @ 2.2 Kg / 10 Sq m complete all as per manufacturer instructions and as directed by Engineer-in-Charge. |
| 9 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing the debris out of the premises complete all as specified and as directed. |
| 10 | Material and labour for providing and fixing stainless steel (grade 304) railing made of hollow tubes ,rectangular/square pipes , channels , plates etc. Including welding ,grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete , including fixing the railing with necessary accessories & stainless steel dash fasterners, stainless steel bolts etc. of required size, on the top of floor or the side of waist slab with suitable arrangement, complter all as specified and as directed. |
| 11 | Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in hard / dense soil complete all as specified and as directed by Engineer-in-Charge. |
| 12 | Material & Labour Hardcore of Broken stone or boulders gauge not exc.63 mm , deposited, spread and levelled in layer not exc. 15 cm thick, watered and rammed to a true surface complete all as specified and as directed. |
| 13 | Material & Labour plain cement concrete Type D-2, 1:4:8 (40 mm graded stone aggregate) in foundation ,filling and mass concrete, complete all as specified and as directed. |
| 14 | Material & Labour plain cement concrete Type B1, 1:2:4 (20 mm graded stone aggregate) as in coping ,benching including weathering, slightly rounded or chamfered angles and including necessary formwork,complete all as specified and as directed. |
| 15 | Material and labour for rendering 15mm thick on fair faces of brick work/concrete surfaces in cement mortar 1:4, and finishing surfaces even and smooth without using extra cement complete all as specified and as directed. |
| 16 | Material & Labour for Preparing of new plastered surface of concrete wall and applying two coats of cement based paint over a coat of chalk whitening, complete all as specified and as directed. |
| 17 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and getting out Hard / Dense soil, complete all as specified and as directed. |
| 18 | Ditto but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders , complete all as specified and as directed.M&L Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and as directed. |
| 19 | Use and waste Formwork to sides of pillars, posts, struts, piers, columns etc for fair finished surfaces of concrete, complete all as specified and as directed. |
| 20 | M&L for RCC of type B1 1:2:4 using 20mm graded aggregate as in Foundations, beam, plinth beams, base of columns etc basement slabs, complete all as specified and as directed. |
| 21 | Material and labour for Plain cement concrete 25 mm thick 1:2:4 type B0 (12.5 mm graded stone aggregate) as in sub base for laying tiles, complete all as specified and directed. |
| 22 | M&L for RCC of type B1 1:2:4 using 20mm graded aggregate as in columns, pillars, piers, post and struts etc, complete all as specified and as directed. |
| 23 | Material and labour anti skid coloured ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc. set with spacer, joints of more than 3mm are grouted with epoxy grout and pointed in white or coloured cement to match the tiles including 15 mm thick screed bed in CM 1:6, complete all as specified and directed. |
| 24 | Supply and fixing of Glazed ceramic coloured tiles in vertical surface 450x 300x 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the tiles as in skirting/dado including matching PVC corner beading over and including provision of backing coat of 10 mm thick in CM 1:4.etc, complete all as specified and directed. |
| 25 | Material and labour for, 18- 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms including edge moulding, machine polish to edge as required and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite all as specified and as directed. |
| 26 | M&L for RCC of type B1 1:2:4 using 20mm graded aggregate as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, complete all as specified and as directed. |
| 27 | M&L for moorurm/stone dust filling in floors or pavings laid in layer n.exc 15cm thick, spread levelled and rammed including watering, complete all as specified and as directed. |
| 28 | M&L 100mm thick for cement concrete type D-2, 1:4:8 20 mm graded aggregate as in sub base of floor and path, complete all as specified and as directed. |
| 29 | Returning, filling in, including spreading, levelling, watering and well ramming in layers n. exc 25cm, complete all as specified and as directed.tc. complete all as specified and as directed. |
| 30 | Removing excavated material n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point, complete all as specified and as directed. |
| 31 | Supply and Fixing of Soap dispenser with pump action complete all as specified and as directed.Make: Parryware CAT No. T6513A1 or Techno commercial equivalent of approved makes specified here-in-after |
| 32 | Supply and fix in repairs brass chromium plated shower rose 150mm size with or without swivel joints any size including fixing to steel pipe of 15mm bore complete all as specified and as directed. (Make: Parryware CAT No. T5135A1 or Techno commercial equivalent of approved makes specified here-in-after) |
| 33 | Supply and Fixing of 5mm thick glass corner glass self of 300mm radius with CP brass railing fixed with brass Brackets complete all as specified and directed.(Make: Parryware CAT No. T6010A1 or Techno commercial equivalent of approved makes specified here-in-after) |
| 34 | Supply and Fixing of Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 500cm long and 125cm wide with chromium plated bracket guard and railing complete all as specified and as directed.Make: Parryware CAT No. T6009A1 or Techno commercial equivalent of approved makes specified here-in-after |
| 35 | Supply and fix in repairs brass peg set of six with screws complete all as specified and direct.(Make: Parryware or Techno commercial equivalent of approved makes specified here-in-after) |
| 36 | Supply and fix in repairs Wash basin oval shape counter top of size 555x450x205mm in any coloured including 32mm bore CP Waste coupling and PVC connection pipe of 15mm x 450mm long complete all as specified and as directed. (Make : Parryware CAT No C0407 or Techno commercial equivalent of approved makes specified here-in-after) |
| 37 | Supply & Fixing in PVC waste pipe 32mm bore for WHB/Sink/Urinal, complete all as specified and as directed. |
| 38 | Supply and fixing in beveled edge mirror 600x450mm of selected quality glass mounted on 6mm commercial plywood and fixed to wooden plug with chromium plated screws and caps all as specified and directed |
| 39 | Supply and fix in repairs vitreous China wash down water closet Vitreous China, semi-pedestal pattern (Anglo-Indian Type) white (excluding flushing cistern and flush pipe) including PVC seat cover white closed pattern with recessed bottom and connection to drain or out going pipe and flushing pipe, complete all as specified and as directed.(Make: Parryware CAT No. C0126CS or Techno commercial equivalent of approved makes specified here-in-after) |
| 40 | Supply and fix in repairs 10 litre capacity PVC Low level flushing cistern including 32mm dia PVC flush pipe, fixing in position with PVC connection pipe of 15mm x 450mm long etc., complete all as specified and as directed. (Make: Parryware CAT No. E8333 or Techno commercial equivalent of approved makes specified here-in-after) |
| 41 | Supply and fix in repairs 15mm bore chromium plated cast copper alloy bib taps fancy type with crutch or butterfly handle screwed down screwed for iron pipe or for brass ferrule all as directed.(Make: Parryware CAT No. G0204A1 or Techno commercial equivalent of approved makes specified here-in-after) |
| 42 | Supply and fix in repairs 15mm bore stop valves/angle cock, chromium plated fancy type, screwed down high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions all as directed. (Make: Parryware CAT No. G0253A1 or Techno commercial equivalent of approved makes specified here-in-after) |
| 43 | Supply and fix in repairs 15mm bore CP 2- Way bib cock double handle with wall flanges, glossy finish complete all as specified and as directed. (Make : Parryware CAT No G021ZA1 or Techno commercial equivalent of approved makes specified here-in-after) |
| 44 | Supply and Fixing of 15mm bore Brass CP mixer(3 in 1) with wall flange ( provision for over head shower and hand shower) for mixing hot & Cold water screwed down for iron pipe complete all as directed. (Make : Parryware CAT No G022FA1 or Techno commercial equivalent of approved makes specified here-in-after.) |
| 45 | Supply and Fixing of 15mm bore ABS hand shower Mult flow 100mm with 1.5M SS tube & ABS Hook complete all as specified and as directed. Make : Parryware CAT No G022FA1 or Techno commercial equivalent of approved makes specified here-in-after. |
| 46 | Supply and fix in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. |
| 47 | Supply and fix in repairs 15mm bore chromium plated cast copper alloy wall mounted sink cock screwed for iron pipe or for brass ferrule complete all as specified and as directed. (Make: Parryware CAT No. G4721A1 or Techno commercial equivalent of approved makes specified here-in-after) |
| 48 | Supply and fix in repairs Tubular towel rail 20mm dia D type 60cm long between flanges chromium plated all as specified and directed. (Make: Parryware CAT No. T5901A1 or Techno commercial equivalent of approved makes specified here-in-after) |
| 49 | Supply and fix in repairs Brass Towel ring Complete all as specified and directed. (Make: Parryware CAT No. T5902A1 or Techno commercial equivalent of approved makes specified here-in-after) |
| 50 | Supply and fix in repairs SS grating 100mm dia complete all as specified and as directed. (Make: Parryware or Techno commercial equivalent of approved makes specified here-in-after) |
| 51 | Supply and fix in repairs Toilet paper Holder with Cover of chromium plated complete all as specified and as directed. (Make: Parryware CAT No. T5914A1 or Techno commercial equivalent of approved makes specified here-in-after). |
| 52 | Supply and fix in repairs PVC (SWR) floor trap 75mm dia plain with grating including jointing with solvent cement etc, complete all as specified and as directed. |
| 53 | Supply and fix in repairs 110mm dia PVC (SWR) pipes, type 'B', single socketed in any length with rubber joints fixed to walls etc., complete all as specified and as directed. |
| 54 | Supply and fix in repairs 75mm dia PVC (SWR) pipes, type 'B' single socketed in any length with rubber joints fixed to walls etc., complete all as specified and as directed. |
| 55 | Supply and fix in repairs PVC (SWR) bends 110mm dia any radius with access door, complete all as specified and as directed. |
| 56 | Supply and fix in repairs PVC (SWR) bends 75 mm dia any radius with access door, complete all as specified and as directed. |
| 57 | Supply and fix in repairs PVC (SWR) junction single,(Single T) 75mm dia equal or unequal with access door, complete all as specified and as directed. |
| 58 | Material & Labour for Rendering 10 mm thick plaster on internal wall surfaces in CM (1:6) finishing the surface even and smooth without using extra cement all as specified and directed . |
| 59 | Material and labour for Preparation of New plastered surface of wall and applying two coats of oil bound distemper over one coat of alkali resistant primer, complete all as specified and as directed. |
| 60 | Material & Labour for Applying 2mm thick wall care putty on wall at any height etc., complete all as specified and as directed. |
| 61 | Complete removal of existing treatment of ceilings and providing Material and labour for applying two coats of oil bound distemper over one coat of alkali resistant priming paint, complete all as specified and as directed. |
| 62 | Material & Labour for Rendering 5mm thick on fair faces of concrete surface of ceiling in CM 1:3, surface finished even and smooth surface without using extra cement complete all as specified and as directed. |
| 63 | Material and labour for Preparation of new plastered surface on ceiling in height and any description and applying two coat of oil bound distemper over a alkali resistant priming coat, complete all as specified and as directed. |
| 64 | Use and waste of formwork to sides of concrete foundations,footings, bases of columns,raft and raft beams, sides and soffits (if any) of foundations, and plinth beams; and similar work; vertical or batter for fair finished surfaces of concrete complete all as specified as directed. |
| 65 | Material and labour for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking bending spirally for hooping for column, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips, as in cover slabs, complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 17, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 08, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 20 daysOct 15, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 27 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender