Tender For maintenance and repair To Barvi Dam...Overhauling, Servicing & Rewinding Of Vt Pump Motors & Allied Electrical Works At Barvi Dam.
Tender Value
32.34 Lakhs
Estimated cost
Bid Submission
01 Oct 2026
13 days left
EMD
32400
Bank guarantee accepted
Document Fee
10030
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Thane → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for maintenance and repair To Barvi Dam...Overhauling, Servicing & Rewinding Of Vt Pump Motors & Allied Electrical Works At Barvi Dam.
BOQ
| Sl. No. | Item Description |
| 1 | Sub Estimate |
| 2 | 1. Dismantling and re-erection of 150 HP VHS Motor Complete. |
| 3 | 2. Rewinding & repairs of squirrel cage induction motor, 440V, 3phase, 50 cycle/sec, 1500 RPM with B class insulation including baking, varnishing, painting etc. (The scrap of winding material shall be retain by rewinder.) |
| 4 | 3. Dismantling & Overhauling of the 150 HP, VT pump set completely and cleaning the each part separately and offering for inspection of the Engineer In Charge with all material tools and tackles column Shaft Spider and bowl assembly and scrapping with wire brush etc complete including all labour and material and transportation to agency‘s workshop for further repairs. |
| 5 | 4. Supply of Line Shaft 1600mm x 50 mm dia. Stainless Steel |
| 6 | 5. Supply of Impeller Shaft 1800 mm x 50 mm Stainless Steel |
| 7 | 6. Supply of Head Shaft (Motor) 1500mm x 50mm Stainless Steel |
| 8 | 7. Supply of Line Shaft Sleeve Stainless Steel |
| 9 | 8. Supply of Line Shaft Coupling Stainless Steel |
| 10 | 9. Supply of Impeller Seal Ring Bronze |
| 11 | 10. Supply of Discharge Case Bush Bronze |
| 12 | 11. Supply of Suction Case Bush Bronze |
| 13 | 12. Supply of Line Shaft Bearing Cutless Rubber |
| 14 | 13. Supply of Top Shaft Sleeve SS 410 |
| 15 | 14. Supply of SS Strainer |
| 16 | 15. Supply of SS Nut Bolt 100mm x 20 mm |
| 17 | 16. Supplying Stuffing Box bush Bronze |
| 18 | 17. Painting pump Assembly |
| 19 | 18. Supplying & fixing of rubber packing and MS Nut Bolt |
| 20 | 19. Balancing and re-machining shaft number etc. complete |
| 21 | 20. Providing at impeller locknut suitable for impeller shaft |
| 22 | 21. Providing and supplying SLUICE VALVE Cast Iron Rising Spindle Sluice Valve Flanged End PN 1.6 As Per IS : 14846 Body, Cover- CI IS:210, Gr. FG260 Door- CI IS:210, Gr. FG260 Body Ring- Bronze IS:318 Gr. LTB2 Door Face- Natural Rubber Hinge Pin- SS ASTM A276 Type 410 Fasteners- CS S:1367, CL-4.6/4.0 Gasket- Natural Rubber Flange Drilling - IS:1538 including transportation, inspection charges, unloading and unloading up to departmental stores etc.21.1. 400 MM Dia |
| 23 | 21.2. 300 MM Dia |
| 24 | 21.3. 150 MM Dia |
| 25 | 22. Providing and supplying NON RETURN VALVE 300 mm dia. C. I. Swing Type Non Return Valve Flanged End PN 1.6 As Per IS : 5312 Body, Cover- CI IS:210, Gr. FG260 Door- CI IS:210, Gr. FG260 Body Ring- Bronze IS:318 Gr. LTB2 Door Face- Natural Rubber Hinge Pin- SS ASTM A276 Type 410 Fasteners- CS IS:1367, CL-4.6/4.0 Gasket- Natural Rubber Flange Drilling - IS:1538 including transportation, inspection charges, unloading and unloading up to departmental stores etc. |
| 26 | 23. LT Cables (Aluminum) (CB-LT/AL)23.1. Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable, 1100 V 4 core 240 sq. mm. aluminium conductor complete erected with glands & lugs on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL |
| 27 | 23.2. Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable, 1100 V 4 core 10 sq. mm. aluminium conductor complete erected with glands & lugs on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL |
| 28 | 23.3. Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable, 1100 V 4 core 16 sq. mm. aluminium conductor complete erected with glands & lugs on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL |
| 29 | 24. Cable Enclosures (CB-CE)24.1. Supplying & laying (including excavation) reinforced cement concrete pipe of NP-2 class of 150 mm diameter in proper line, level and slope including providing and fixing collars in cement mortar 1:2 and curing etc. complete. |
| 30 | 24.2. Supplying and laying (including excavation of suitable width & depth up to 90 cm) 50 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, complete. |
| 31 | 24.3. Supplying and laying (including excavation of suitable width & depth up to 90 cm) 120 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, complete. |
| 32 | 25. Providing and laying Cast in situ/Ready Mixcement concrete in M20 of trap/ granite/quartzite/gneiss metal for steps including steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface, only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.), with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) |
| 33 | 26. HT Cables (CB-HT)26.1. Supplying , erecting & terminating XLPE insulated galvanised steel formed wire armoured (strip) cable 22 kV(E), 3 x 95 sq. mm. aluminium conductor laid in provided trench / pipe as per specification no. CB-HT |
| 34 | 27. Cable Joints & End Termination Kits (HT Cables) (CB-JT/HT)27.1. Providing and erecting Heat shrinkable indoor termination kit for 11 kV (UE)/22 kV ( E ) XLPE HT cable 3x up to 95 sq. mm. with necessary material as per specification no. CB-JT/HT |
| 35 | 27.2. Providing and erecting Heat shrinkable outdoor termination kit for 11 kV (UE)/ 22 kV ( E ) XLPE HT cable 3x up to 95 sq. mm. with necessary material as per specification no. CB-JT/HT |
| 36 | 28. Plate, Pipe type Earthing (EA-EP)28.1. Supply, installing, and testing of maintenance free earthing comprising of electrode of 17.2 mm diameter Low Carbon Steel with 250 micron molecular copper bonded earthing rod of Length 3m along with Carbon based environment friendly back fill ground enhancing compound required to fill up the excavated earth with required quantity (min. 125kg) complete, and recording the results specification no. EA-MF |
| 37 | 29. Highbay LED Fittings (FG-ODF/LED)29.1. Supplying and erecting integrated LED Highbay Fitting 70W IP65 & IK08 class having die cast aluminium housing with polycarbonate diffuser with integrated optics, having system lumens output of Min.10000 Lumens, min. efficacy of 145 lumen/W, CRI>70, CCT upto 6500K, THD<10%, p.f. >0.90, operating range of 140-240V, inbuilt surge protection of 4 kV, Life class of 50,000 Hrs at L50B50, including driver complete with 2 Year warranty as per specification No FG-ODF/LED. |
| 38 | 30. Outdoor Fittings (FG-ODF)30.1 Supplying and erecting integrated LED flood light fitting Max. 100W IP65 & IK07 class having pressure die-cast aluminium housing, having system lumens output of Min. 12000 Lumens, min. efficacy of 120 lumen/W, CRI>70, CCT upto 6500K, THD<10%, p.f. >0.90, operating range of 140-270V, inbuilt surge protection of 4 kV, Life class of 50,000 Hrs at L70B50 including driver with U shaped bracket with minimum 2 Years warranty as per specification No. FG-ODF/FL. |
| 39 | 31. Bunch of Wires (WG-MA/BW)31.1. Supplying & erecting mains with 2x2.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/bus bars or any other places. as per specification no. WG-MA/BW |
| 40 | 32. Fans (FG-FN)32.1. Supplying and erecting exhaust fan heavy duty 230 V A.C. 50 cycles 450 mm. 900 RPM complete erected in position as per specification no. FG-FN/EXF |
| 41 | 33. Rebate for Old worn out dismantled pump spares, Valves, Cables etc complete. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 17, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 01, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 13 daysOct 06, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 18 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender