Tender For repair maintenance Various E&M Services At 72 Nos. Delhi Govt. Officers Flat Gk-1, New Delhi. (Sh:- Supply, Installation, Testing and Commissioning Of Chimney,Geyser & Miscellaneous Electrical Work In Various Flats At Gk-1 New Delhi.)
Tender Value
5.93 Lakhs
Estimated cost
Bid Submission
24 Sep 2026
6 days left
EMD
11867
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Delhi → Delhi
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for repair maintenance Various E&M Services At 72 Nos. Delhi Govt. Officers Flat Gk-1, New Delhi. (Sh:- Supply, Installation, Testing and Commissioning Of Chimney,Geyser & Miscellaneous Electrical Work In Various Flats At Gk-1 New Delhi.)
BOQ
| Sl. No. | Item Description |
| 1 | SITC of wall/celling mounted type kitchen chimeny of 600mm, nominal width, air flow 1400 m3 /hr. at rated speed having curve glass, three speed control, thermal auto clean & filter less technology, touch control with motion sensors and metal oil collector cup features etc. aluminium flexible pipe of 150 mm dia upto 4 mtr. alongwith all accessories etc. complete as reqd. i/c OEM shall give warrantee of 2 years for product and 10 years for motor. |
| 2 | Supply, Installation, Testing and Commissioning of 25 litre Water Storage Heater/Gyser BEE 5 star rated ISI Marked, Rated power input 2000 W, Energy saving PUF insulation, powerful heating element rust proof suitable with 230V 50 Hz AC supply, temprature control feature minimum 2 Years warranty, power cord with 3 pin plug, 1 mannual, Wall Mounting accessory & 2 flexi pipe and with all other accessories i/c connection etc. as required. |
| 3 | Wiring for light point/ fan point/ exhaust fan point/ callbell point with 1.5 sq.mm FRLS/HFFR PVC insulated copper conductor single core cable in surface/ recessed steel conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS/HFFR PVC insulated copper conductor single core cable etc. as required.required. |
| 4 | Group B |
| 5 | Rewiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable and 1.5 sq.mm FRLS PVC insulated copper conductor single core cable as earth wire in existing surface/ recessed steel/PVC conduit including dismantling as required. |
| 6 | Group 'B' |
| 7 | Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. |
| 8 | 3 x 1.5 sq. mm |
| 9 | 3 x 4 sq. mm |
| 10 | 3 x 6 sq. mm |
| 11 | Supplying and fixing of following sizes of steel conduit along with accessories in surface/recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required. |
| 12 | 20 mm |
| 13 | 25 mm |
| 14 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. |
| 15 | 5/6 amps switch |
| 16 | 15/16 amp switch |
| 17 | 3 pin 5/6 A socket outlet |
| 18 | 6 pin 15/16 amp socket outlet |
| 19 | Bell Push |
| 20 | Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required |
| 21 | Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required. |
| 22 | 1 or 2 module (75mm x 75mm) |
| 23 | 3 Module (100 mmX75 mm) |
| 24 | 6 module (200mm x 75mm) |
| 25 | 8 Module (125 mmX125 mm) |
| 26 | 12 Module (200m x 150mm) |
| 27 | Supplying & fixing suitable size GI box wih modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, \\"C\\" curve including connections, painting etc. as required. |
| 28 | Supplying, installation, testing and commissioning of 1200 mm sweep ceiling fan having copper wound motor and suitable for operation on 230 volt 50 Hz AC Supply including wiring the down rods of standard length (upto 30 cm) with 1.5 sq.mm FRLS PVC insulated, copper conductor, single core cable complete etc. as required. |
| 29 | Supplying ,installation & testing & commissioning of 10W 2ft. LED Mirror Light (6500K) luminarie having integrated LED Driver with high transitivity opal diffuser for direct lighting i/c wiring and making connections with 1.5sq.mm. PVC insulated FRLS, copper conductor single core cable including loop earthing suitable for operation on 230 volt 50 Hz AC supply complete with all accessories/attachments etc. as reqd. |
| 30 | Supplying, installation, Testing & Commissioning of LED Recessed /surface Downlighter (Round / square/ Rectangular) SMD type of following body material with PMMA and prismatic diffuser and construction as per IS :10322 with driver as per the requirement with Driver efficiency >85%, Operating voltage AC 140-270 Volt, freq 50/60 hz, Operating temp range -15 deg to 40 deg centigrade, internal surge protection of 2.5 KV with Short & Open circuit protection ,THD < 10% , P. F.≥0.95, IP20, CRI >80 , UGR (Unified Glare Rating) < 19, Flicker free (flicker should be below 5 %), life time (LED,Driver & electrical circuitry), life time of minimum 50000 Burning Hours with , 70% of initial Lumen maintained till life ends , CCT 3000°K / 4000°K / 5700°K /6000°K/6500°K (As per ANSI Bin), SDCM(Standard Deviation Color Matching) <3, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard and trade mark certificate ( T.C.). Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. OEM must have its own in house NABL lab setup for all testing facilities for LED fixtures. \\"complete in all respect i/c connections with 1.5 sq mm FRLS, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥120 <135 lm/Watt output . LM79 & LM80 Test report from NABL lab for all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminum housing such that LED junction temperature shall not rise above 90°C). |
| 31 | 18 watt |
| 32 | Supplying, installation & testing & commissioning of decorative wall mounting fixture with Opal Glass diffuser suitable for 9W-20W LED Lamp i/c wiring and making connections with 1.5sq.mm. PVC insulated FRLS, copper conductor single core cable including loop earthing complete etc. as required, suitable for 230 volt 50 Hz AC supply complete with all accessories/attachments etc. as reqd. |
| 33 | Supplying, installation & testing & commissioning of decorative LED mirror light suitable for wall mounting above mirror or painting, complete with all accessories, wiring and connections, comprising integrated 12 Watt LED light source operating on 220-240V AC, 50 Hz supply with metal body and synthetic components in bronze/ antique finish, having colour rendering index (CRI) >80,designed for uniform illumination of mirror/painting surfaces, suitable for indoor applications, including all fixing hardware, mounting arrangements, testing and commissioning as required, complete in all respects as per site requirements and directions of Engineer-in-charge. |
| 34 | Supplying and fixing 40 W LED post top lantern having IP66 rating on the existing pole of 65mm diameter suitable for single phase 230V, 50Hz electric supply complete with testing and commissioning etc as required. |
| 35 | Credit for dismantle materials |
| 36 | Assorted Ceiling Fans |
| 37 | Assorted Switch /sockets/Regulators/Sheet |
| 38 | Assorted all type indoor fittings |
| 39 | Assorted wire with insulation copper |
| 40 | Assorted Post Top Lamp Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 17, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 24, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysSep 24, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender