Tender For Special Repair To Toilet Blocks And Bathroom Near Bldg No T-30, P-17 And P-18 Of 36 Arty Bde C Ans Bldg No P-299 Of 9 Dogra Under Ge Gwalior.
Tender Value
37.81 Lakhs
Estimated cost
Bid Submission
06 Oct 2026
2 days left
EMD
75638
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Gwalior → Madhya Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repair To Toilet Blocks And Bathroom Near Bldg No T-30, P-17 And P-18 Of 36 Arty Bde C Ans Bldg No P-299 Of 9 Dogra Under Ge Gwalior.
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of concrete of any description in any position complete all as specified and directed. |
| 2 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed. |
| 3 | M&L for 25mm thick Plain Cement Concrete 1:2:4 type B-1(using 20mm graded stone aggregate) complete all as specified and directed. |
| 4 | M&L coloured non skid tile 7 to 8mm thick (square/ rectangular) area of Each tiles exc. 0.06 sqm n exc., 0.18 sqm in floor etc. set and jointed with neat cement slurry and pointed in colour cement to matchover and including 15 mm thick screed bed in cm 1:6 complete all as specified and directed. |
| 5 | M&L glazed ceramic tiles of size 450x350x/6/7 /350x250x7/ 300x200x7mm thick coloured tiles on walls such as skirting and dado and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick rendering in CM (1:4) finished fair and rough as backing coat complete all as specified and directed. |
| 6 | M&L for brick work with sub class 'B' bricks (old size) straight or curved on plan, exc. 6m mean radius built, in cement mortar 1:6 as in manholes, septic tanks, soakage pits, drain etc in any position complete all as specified and directed. |
| 7 | Taking down cement plaster, terrazzo dado in any thickness from brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc including removal of rubbish, vegetation etc outside complex (MoD land) complete all as specified and directed. |
| 8 | M&L for 10 mm thick rendering in cement mortar (1:6) on fair faces or brick work of concrete surfaces of walls, finished even and smooth (without using extra cement) complete all as specified and directed. |
| 9 | M&L for 5 mm thick rendering in cement (1:3) on fair faces of concrete as in ceiling, finished even and smooth without using extra cement complete all as specified and directed. |
| 10 | M&L for 15 mm thick rendering in cement mortar on fair faces of brick work or concrete surfaces , applied in two layers ie. Ist layer of 10 mm thick rendering in cement mortar (1:6) and 2nd (top) layer of 5 mm thick rendering in cement mortar (1:4) and top layer mixed with water proofing compound as per manufacturer's instruction & finished even and smooth without using extra cement complete all as specified and directed. |
| 11 | Supply only Integral waterproofing compound complete all as specified and directed. |
| 12 | M & L for Washed stone grit plaster on exterior walls in two layers, (i) under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand ) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, (ii) top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern and colour including scrubbing and washing, the top layer with brushes and water to expose the stone chippings complete all as specified (Payment for providing grooves shall be made separately) complete as per specifications and direction. |
| 13 | M & L for forming groove of uniform size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove complete as per specifications and direction. |
| 14 | M/L for three coats of white wash on New surfaces (wall) including all prereration complete all as specified & directed |
| 15 | M/L for three coats of white wash on New surfaces Ceiling including all prereration complete all as specified & directed |
| 16 | Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed. |
| 17 | M&L for 20 mm thick screed bed or bedding layer of mortar in cement mortar 1:6 for laying floor finishes complete all as specified and directed |
| 18 | M&L for chequered cement concrete tiles 250mm x 250mmx 20 to 22mm thick (ISI marked) of approved colour, set jointed and pointed in cement slurry in floors with grey cement and pigments complete all as specified and directed. |
| 19 | M&L 75 mm thick PCC 1:3:6 Type C2 (using 40 mm graded stone aggregate) as in plinth protection, PCC will be laid with 12 mm gap & the gap will be filled up with bituminous joint filler type A, complete all as specified and as directed. |
| 20 | M&L for brickwork with old size fly ash bricks half brick thick wall, straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and directed. |
| 21 | Taking down eaves gutters and rain water pipes (any size 75mm to 110mm of any pattern) ,of any description and in any position, including all fittings , heads, shoes, bends, swan necks, etc., (measured overall as fixed along the centre line over fittings and accessories)complete all as specified and directed. |
| 22 | S&F 110 mm PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed. |
| 23 | ditto but fixed in wall 110 mm complete all as specified and directed. |
| 24 | S&F 75 mm PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed. |
| 25 | -ditto- but fixed in wall 75 mm |
| 26 | S& F PVC SWR bends any radius 75mm dia with access door or without access door complete all as specified and directed. |
| 27 | S& F PVC SWR bends any radius 110 mm dia with access door or without access door complete all as specified and directed. |
| 28 | S& F PVC (SWR) junction single, (Single T) equal or unequal 75mm dia with access door or without access door complete all as specified and directed. |
| 29 | S& F PVC (SWR) junction single, (Single T) equal or unequal 110 mm dia with access door or without access door complete all as specified and directed. |
| 30 | S&F PVC SWR vent cowl 110 mmn dia complete all as specified and directed. |
| 31 | S&F for 110 mm bore pipes stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall etc; complete all as specified and directed. |
| 32 | S&F for 75 mm bore pipes stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall etc; complete all as specified and directed. |
| 33 | S&F 75 mm PVC (SWR) couplers complete all as specified and directed. |
| 34 | S&F 110 mm PVC (SWR) couplers complete all as specified and directed. |
| 35 | S&F 110 mm PVC (SWR) junction double, (double T), equal or unequal complete all as specified and directed. |
| 36 | S&F 110mm PVC pipe 'P' or 'S' trap, complete all as specified and directed. |
| 37 | Taking down 15mm bore steel water tubing and connections etc, including cleaning for refixing or removal from site complete all as specified and directed. |
| 38 | Taking down 20mm bore steel water tubing and connections etc, including cleaning for refixing or removal from site complete all as specified and directed. |
| 39 | Supplying and laying of 20 mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches and fixed/concealed complete to walls and ceiling or laid in floor etc complete all as specified and directed. |
| 40 | Supplying and laying of 25 mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches and fixed/concealed complete to walls and ceiling or laid in floor etc complete all as specified and directed. |
| 41 | S&F in repair W.C vitreous china, squatting pan orissa patern size 580x440mm white with intergral foot rest & P - or S trap, flush pipie complete excluding cistern complete all as specified and directed. |
| 42 | S&F in repair PVC valveless, syphonic action type flushing cistern low level white with inlet ball valve, float and handle incl brackets and connections to pipes of capacity 10 lts complete all as spepciified and directed. |
| 43 | S&F in repair stop cock/angle valve 15 mm nominal bore brass chromium plated fancy type screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed complete all as specified and directed |
| 44 | S&F in repair Brass chromium plated shower rose 125mm dial size with15 mm shower arm complete all as specified and directed |
| 45 | M&L 75 mm dia PVC (SWR) floor trap with grating including jointing with solvent cement joint complete all as specified and directed. |
| 46 | S&F PVC connections 15mm size with PTMT nuts of length 450 mm complete all as specified and directed. |
| 47 | S&F in repair CP fancy type bib tap cast copper alloy with crutch or butter fly handle (Long Body), screwed down screwed for iron pipe 15 mm bore of tubing complete all as specified and directed |
| 48 | S&F in repair Vitreous China wash basin oval type white size 580 x 450mm excluding taps waste, chain and plug, but fixed waste pipe complete all as specified and directed. |
| 49 | S&F in repair 15 mm Fancy type pillar tap cast copper alloy with capstan head chromumum plated screwed down high pressure with lettered hot or cold with long screwed shank and fly nut screwed for iron pipe fixed complete all as specified and directed. |
| 50 | S&F for 32mm PVC waste pipe for flushing cistern complete all as specified and directed. |
| 51 | S&F in repairs bevelled edge mirror of selected quality glass, 6mm thick fixed with chromium plated brass screws and cup washers all as specified and as directed. |
| 52 | S&F 25 mm bore Ball brass valves, high pressure, with polyethylene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed with all necessary fitting and fixer reducer elbow etc complete all as specified and directed |
| 53 | S&F in repair 15 mm bore cast copper alloy stop valve, fancy type chromimum plated with long shank and cup (concealed type) screwed down, high pressure, with crutch or butter fly screwed both ends for iron pipe or union and fixed complete all as specified and directed. |
| 54 | S&F in repair Vitreous China half stall urinal flat back of size 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe vitreous china urinal bowl type white fixing plugs bedding urinal against wall in cement mortar 1:2 securing to plug with and including 60 mm long brass screws urinal spreader of PTMT any color fixing with 15 mm dia pipe PVC pointing aroung urinal back in cement complete all as specified and directed |
| 55 | S&F for Towel Ring of CP fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90gms) complete all as specified and directed. |
| 56 | S&F in repair Tubular towel rail, 20mm dia, D type, 60cm long between flanges including brackets complete all as specified and directed. |
| 57 | S&F in repair Stainless steel cromium plated Soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed. |
| 58 | S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and as directed. |
| 59 | S&F in repair 500 ltr capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including 25mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe all as specified in SSR Part-I complete all as specified and directed. |
| 60 | Taking down old U/S wooden /steel chowkhat with shutter size n.exc 1.50 sqm Each and removing from site complete all as specified and directed. |
| 61 | All as per item No 60 above but exc 1.5 and nexc 4 Sqm |
| 62 | Taking down shutter from the frame of any discription size n exe 2 sqm each and refixing in same opening in same openinig and necessary repair complete all as specified and directed. |
| 63 | S&F Box type steel windows with side hung shutters (double shutters for glass and guaze) jointed together with an including grills using 10mm square bars @10 cm C/C as per TD No CEBZ/TD/14/2011 including box type hinges with steel handle and steel peg stay complete with glazing bars devetailed and welded making a good complete all as specified and as directed. Note : Glass/guage shall be measured and paid separately under respective item. |
| 64 | M&L for Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specification of drawing complete all as specified and directed. |
| 65 | M&L for Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel heaving a PVC sheet strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification of drawing complete all as specified and directed |
| 66 | S&F 75 mm Butt hinges, medium weight, cold rolled mild steel, and fixed complete all as specified and as directed. |
| 67 | S&F 75 mm long Mild steel barrel tower bolts, stove enamelled black, with bright bolt and fixed all as specified and as directed. |
| 68 | S&F 4.8 mm thick sheet or frosted glass of selected quality in square size not exceeding 0.5 sqm in Each pane, fixed to aluminum frame with and including suitable rubber beading complete all as specified and directed |
| 69 | M&L Preparing New steel surface of any description over 10 cm width girth not otherwise describe and applying two coats of synthethic enamel paint over a coat of red oxide complete all as specified and directed. |
| 70 | Cutting holes in brick walls (exc half brick but n. exc one brick) in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 (using 20mm graded stone aggregate) as required complete all as specified and directed. Please Enable Macros to View BoQ information |
| 71 | Cutting holes in brick walls (exc half brick but n. exc one brick) in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 (using 20mm graded stone aggregate) as required complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 17, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 06, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysOct 08, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender