Tender For Repair/Maint And Painting/Polishing Of Steel And Wooden Furniture Including Repair And Conversion Of Charpoy Gi Pipe With Newer To Plywood Top In Respect Of Hasimara And Coochbehar Mil Stn Under Ge (S) Binnaguri
Tender Value
34 Lakhs
Estimated cost
Bid Submission
27 Oct 2026
1 days left
EMD
68000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jalpaiguri → West Bengal
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/Maint And Painting/Polishing Of Steel And Wooden Furniture Including Repair And Conversion Of Charpoy Gi Pipe With Newer To Plywood Top In Respect Of Hasimara And Coochbehar Mil Stn Under Ge (S) Binnaguri
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 01-Oct-2026 | 8937-Date_1 | Date | 15-Oct-2026 |
| 2 | 22-Oct-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 27-Oct-2026 |
| 3 | 15-Oct-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 22-Oct-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Sofa Set 5 Seater Wooden (FD-281/373/258, FD/MAP-II/02) |
| 2 | Replacement of old/UNS Side rail and S&F new side rail made of 1st class teak wood all as specified and shown in drawing. |
| 3 | Replacement of old/UNS broken batten of seat and S&F new batten of seat made of 1st class teak wood all as specified and shown in drawing. |
| 4 | Replacement of old/UNS broken batten of back and S&F new batten of back made of 1st class teak wood all as specified and shown in drawing. |
| 5 | Replacement of old/UNS wooden rail to support back frame and S&F new rail made of 1st class teak wood all as specified and shown in drawing. |
| 6 | Replacement of old/UNS front/rear legs and S&F new legs made of 1st class teak wood all as specified and shown in drawing. |
| 7 | Replacement of old/UNS arms and S&F new arms made of 1st class teak wood all as specified and shown in drawing. |
| 8 | Replacement of old/UNS PVC shoes and S&F new PVC shoes superior quality all as specified and shown in drawing. |
| 9 | Replacement of unserviceable cushion for seat/back with new cushion comprising single piece of seat/back each made of foam 40 density of size 22\\"x21\\"x100mm complete all as specified . Cushion duly covered with tapestry cloth stitched with fine standard thread and providing a chain best quality (at either of 21\\" side) of with two runners at both ends superior quality complete all as specifiedand shown on drg. Note - Rate of tapestry cloth shall not be less than Rs 550/- per RM and colour and texture of Tapestry shall be approved |
| 10 | M&L for applying French polish to wood/ wooden base surface with one or more coat till glossy finish achieved to match with existing surface (wood/woodbase) and remove the all dirt/dust etc from existing/ replaced parts before polish and applying wood filler whenever required complete all as specifed, and shown on drawing. |
| 11 | Sofa Set 4 Seater Wooden (FD-281) |
| 12 | Replacement of old/UNS Side rail and S&F new side rail made of 1st class teak wood all as specified and shown in drawing. |
| 13 | Replacement of old/UNS broken batten of seat and S&F new batten of seat made of 1st class teak wood all as specified and shown in drawing. |
| 14 | Replacement of old/UNS broken batten of back and S&F new batten of back made of 1st class teak wood all as specified and shown in drawing. |
| 15 | Replacement of old/UNS wooden rail to support back frame and S&F new rail made of 1st class teak wood all as specified and shown in drawing. |
| 16 | Replacement of old/UNS front/rear legs and S&F new legs made of 1st class teak wood all as specified and shown in drawing. |
| 17 | Replacement of old/UNS arms and S&F new arms made of 1st class teak wood all as specified and shown in drawing. |
| 18 | Replacement of old/UNS PVC shoes and S&F new PVC shoes superior quality all as specified and shown in drawing. |
| 19 | Replacement of unserviceable cushion for seat/back with new cushion comprising single piece of seat/back each made of foam 40 density of size 22\\"x21\\"x100mm complete all as specified. Foam cushion duly covered with tapestry cloth stitched with fine standard thread and providing a chain best quality (at either of 21\\" side) of with two runners at both ends superior quality complete all as specified and shown on drg. Note - Rate of tapestry cloth shall not be less than Rs 550/- per RM and colour and texture of Tapestry shall be approved |
| 20 | M&L for applying French polish to wood/ wooden base surface with one or more coat till glossy finish achieved to match with existing surface (wood/woodbase) and remove the all dirt/dust etc from existing/ replaced parts before polish and applying wood filler whenever required complete all as specifed, and shown on drawing. |
| 21 | Chair Writing (FD-280) |
| 22 | Taking out old damaged/decayed front leg from its position and S & F new front leg & fixing as per existing size and section in the same position made out of seasoned ‘Teak Wood’ timber including applying French polish high glossy finish over wood filler on all exposed timber surfaces complete all as specified and as shown on drg. |
| 23 | All as per serial item No 3.01 here in before but for rear leg and -ditto-. |
| 24 | Taking out old damaged/decayed side rail left/right from its position and S & F new side rail in the same position as per existing shape and size made out well seasoned ‘Teak Wood’ timber with making holes for canning including applying French polish high glossy finish over wood filler as required on all exposed timber surfaces complete all as specified and as shown on drg. |
| 25 | (d) All as per Serial item No 3.03 here in before but for Front/Rear rail and –ditto-. |
| 26 | Taking out old damaged/decayed bottom stiffener from its position and S & F new bottom stiffener all as existing shape and size in the same position made out well seasoned ‘Teak Wood’ timber including applying French polish high glossy finish over wood filler on all exposed timber surfaces complete all as specified and as shown on drg. |
| 27 | All as per Serial item No 3.05 here in before but for back rest and –ditto-. |
| 28 | All as per Serial item No 3.05 here in before but for hand rest (left/right) and -ditto-. |
| 29 | Taking out and removing old unserviceable worn-out of plastic cane from chair writing and recanning the same with white new plastic cane half round oval type 2mm wide, 0.4mm thick for weaving and 4mm wide for boarding (Godrej Pattern) complete all as specified and as shown on drg. |
| 30 | Taking out of all old unserviceable rubber/PVC shoes and S & F new hard rubber PVC shoes with screws as approved, and shown on drg. |
| 31 | M&L for applying French polish with one or more coat till glossy finish achieved to match with existing surface (wood/woodbase) and remove the all dirt/dust etc from existing/ replaced parts before polish and applying wood filler whenever required complete all as specifed, and shown on drawing. |
| 32 | Chair Dining (FD-228/FD-279) |
| 33 | Taking out old damaged/broken front leg from its position and S&F new front leg on the same position as per existing shape and size made out of well seasoned ‘Teak Wood’ timber with providing hard rubber shoe at bottom of leg complete all as specified, and shown on drawing. |
| 34 | -Ditto- all as per ser No 4.01 above but rear leg and –ditto-. |
| 35 | Taking out old damaged / broken seat rail (front / back) and side rail (left / right) from its position of chair dining and S&F new seat of front / side rail in the same position as per existing shape and size made out of well seasoned ‘Teak Wood’ timber and making holes for canning with slightly rounded on the edges of the holes all as specified, and shown on drawing. |
| 36 | Taking out old damaged / broken leg stiffener from its position and S&F new leg stiffener in the same position as per existing shape and size made out of well seasoned ‘Teak Wood’ timber complete all as specified, and as shown on drawing. |
| 37 | -Ditto- all as per Ser No 4.04 above but of back rest and –ditto-. |
| 38 | Taking out and removing all unserviceable worn out plastic cane from seat of chair dining and re-canning the same with new white plastic cane of 2mm wide, 0.4mm thick half round (oval type) for weaving and 4mm wide for bordering as per Godrej pattern complete all as specified and as shown on drawing. |
| 39 | M&L for applying French polish with one or more coat till glossy finish achieved to match with existing surface (wood/woodbase) and remove the all dirt/dust etc from existing/ replaced parts before polish and applying wood filler whenever required complete all as specifed, and shown on drawing. |
| 40 | Table Wooden 900 x 900 x 760 mm w/o drawer (FD-291) |
| 41 | Taking out old damaged/decayed top from its position and S&F new top in the same position as per existing shape and size made out of 18/19 mm thick pre-laminated particle board exterior grade including providing 4mm thick wall seasoned 1st class teak wood beading all round complete with all four corners fixed with screw wooden design pieces of teak wood, all as specified, and shown on drawing. |
| 42 | Taking out old damaged/decayed long rail from its position and S&F new long rail in the same position as per existing shape and size made out of well seasoned 1st class ‘Teakwood’ timber all as specified, and shown on drawing. |
| 43 | -Ditto- all as per item No 05.02 above but short rail and –ditto-. |
| 44 | -Ditto- all as per item No 05.02 above but leg and –ditto-. |
| 45 | Taking out old unserviceable / damaged shoes and S&F new PVC/hard rubber shoes in leg complete all as specified |
| 46 | M&L for applying French polish with one or more coat till glossy finish achieved to match with existing surface (wood/woodbase) and remove the all dirt/dust etc from existing/ replaced parts before polish and applying wood filler whenever required complete all as specifed, and shown on drawing. |
| 47 | Table 900 x 600 x 760 mm with drawer (FD-41(M)/ FD-283) |
| 48 | Taking out old damaged/decayed top from its position and S & F new top in the same position as per existing shape and size made out of 18/19 mm thick pre laminated particle board exterior grade having one side white balancing and other side Mysore teak colour and providing 4mm thick wall seasoned 1st class teak wood beading all round including applying one coat of French Polish over wood filler complete as specified and as shown on drawing. |
| 49 | Taking out old damaged/decayed long rail from its position and S & F new long rail in the same position as per existing shape and size made out of well seasoned ‘TEAK WOOD’ timber complete including applying one coat of French polish over wood filler wherever required complete as specified and as and as shown on drg. |
| 50 | -Ditto- all as per item Ser No 06.02 above but for short rail and –ditto-. |
| 51 | -Ditto- all as per item Ser No 06.02 above but for leg and –ditto-. |
| 52 | -Ditto- all as per item Ser No 06.02 here-in-before but for stiffener and –ditto-. |
| 53 | Taking out old damaged/decayed drawer from its position and S & F new drawer as per existing shape and size made out well seasoned ‘TEAK WOOD’ timber complete all as specified and as shown on drg. |
| 54 | Taking out old unserviceable knobs from its position and S & F new knob 25 mm round brass CP Knob fixed with new brass screw, nut/belts and washer complete all as specified and as specified. |
| 55 | M & L for applying French polish glossy finish to all exposed wooden surfaces including preparation of surfaces applying wood filler wherever required complete all as per specified |
| 56 | Table 900 x 600 x 760 mm without drawer (FD-55(M)/ FD-231/ FD-284) |
| 57 | Taking out old damaged/decayed top from its position and S & F new top in the same position as per existing shape and size made out of 18/19 mm thick pre-laminated particle board exterior grade having one side white balancing and other side Mysore teak colour and providing 4mm thick wall seasoned 1st class teak wood beading all round including applying one coat of French Polish over wood filler complete as specified and as shown on drawing. |
| 58 | Taking out old damaged/decayed long rail from its position and S & F new long rail in the same position as per existing shape and size made out of well seasoned ‘KALARIRISH’ timber including applying one coat of French polish over wood filler complete as specified and shown on drg. |
| 59 | -Ditto- all as per item Ser No 07.02 here-in-before but short rail and –ditto-. |
| 60 | -Ditto- all as per item Ser No 07.02 above but leg and –ditto-. |
| 61 | -Ditto- all as per item Ser No 07.02 above but stiffener and –ditto-. |
| 62 | M & L for applying French polish glossy finish to all exposed wooden surfaces including preparation of surfaces over wood filler wherever required complete all as specified. |
| 63 | Teapoy (FD-278/382) |
| 64 | Taking out old damaged / decayed top form its position and S&F new top made with 18/19mm thick pre-laminated particle board exterior grade including 4mm thick well seasoned 1st class teak wood beading all round complete all as specified, and shown on drawing. |
| 65 | Taking out old damaged / decayed long rail (front/rear) from its position and supply of fixing new long rail as per existing shape and size made out of well seasoned 1st class ‘Teakwood’ timber including applying one coat of French polish over wood filler in all exposed timber surfaces complete all as specified and shown on drawing. |
| 66 | ‘-Ditto- all as per item No 08.02 above but for short rail (right/ left) and -ditto-. |
| 67 | ‘-Ditto- all as per item No 08.02 above but for leg and -ditto-. |
| 68 | M&L for applying two coat of French polish finish to exposed wooden surface including preparation of surface and applying wood filler to new components complete all as specified |
| 69 | Taking out old unserviceable / damaged shoes and S&F new PVC/hard rubber shoes in leg complete all as specified |
| 70 | Table Peg (FD-25(M)/ FD-277/ FD-384) |
| 71 | Taking out old damaged / decayed top form its position and S&F new top made with 18/19mm thick pre-laminated particle board exterior grade including 4mm thick well seasoned 1st class teak wood beading all round complete all as specified and as shown on drawing. |
| 72 | Taking out old damaged / decayed long rail (front/rear) from its position and supply of fixing new long rail as per existing shape and size made out of well seasoned 1st class ‘Teakwood’ timber all as specified and shown on drawing. |
| 73 | -Ditto- all as per item No 09.02 above but for short rail (right/ left) and -ditto-. |
| 74 | -Ditto- all as pr item No 09.02 above but for leg and -ditto-. |
| 75 | M&L for applying French polish with high glossy finish to exposed wooden surfaces including preparation of surfaces and applying wood filler wherever required complete all as specified |
| 76 | Taking out old unserviceable / damaged shoes and S&F new PVC/hard rubber shoes in leg complete all as specified |
| 77 | Teapoy (FD-29(M)/ FD-235/ FD-274) |
| 78 | Taking out old damaged / decayed top from its position and S&F new top as per existing shape and size in the same position made out of 18/19mm thick pre-laminated particle board exterior grade including 4mm thick 1st class teak wood beading all round complete all as specified and shown on drawing. |
| 79 | Taking out old damaged / decayed leg from its position and S&F new leg in the same position as per existing shape and size made out of well seasoned 1st class ‘Teak Wood’ timber completed all as specified and shown on drawing. |
| 80 | Taking out old damaged / decayed long rail from its position and S&F new long rail in the same position as per existing shape and size made out of well seasoned 1st class teak wood’ timber complete all as specified, and shown on drawing. |
| 81 | (d) -Ditto- all as per items No 10(c) above but short rail and –ditto-. |
| 82 | (e) M&L for applying complete polishing with french polish two coats glossy finish to wooden surfaces including existing/replaced parts preparation of surfaces and applying wood filler whenever required complete all as specified, and shown on drawing. |
| 83 | (f) Taking out old unserviceable / damaged shoes and S&F new PVC /hard rubber shoes with screw in leg complete all as specified |
| 84 | Table Dining Six Persons (FD-30(M)/FD MAP-II- 03) |
| 85 | (a) Taking out old damaged/decayed top from its position and S&F new top as per existing shape and size in the same position made out of 18/19 mm thick plywood BWR grade with 1mm thick decorative laminate type-1 fixed with approved adhesive as per manufacture instruction including providing teak wood beading all round complete as specified and as shown on drawing. |
| 86 | (b) Taking out old damaged / decayed long rail from its position and S&F new long rail in the same position as per existing shape and size made out well seasoned ‘Teakwood’ timber including applying one coat of French polish over wood filler over exposed new timber surfaces compete all as specified and as shown on drawing. |
| 87 | -Ditto- all as per item No 11.02 above but short rail and –ditto-. |
| 88 | -Ditto- all as per item No 11.02 above but leg and –ditto-. |
| 89 | Provn of new HW bracket/corner between leg and side rail all as specified |
| 90 | M&L for applying French polish glossy finish to all exposed wooden surfaces after preparation of surfaces with applying wood filler wherever required complete all as specified and as shown on drawing. |
| 91 | Table Dining four Persons (FD/MAP - II/ 03) |
| 92 | Taking out old damaged/decayed top from its position and S&F new top in the same position as per existing shape and size made out of 18/19 mm thick plywood BWR grade with 1mm thick decorative laminate type-1 including providing teak wood beading all round complete as specified and as shown on drawing. |
| 93 | Taking out old damaged/decayed long rail from its position and S&F new long rail in the same position as per existing shape and size made out well seasoned 'Teakwood' timber including applying one coat of french polish high glossy finish over wood filler over exposed new timber surfacescomplete all as specified and as shown in drawing. |
| 94 | All as per item No 12.02 here in before but short rail complete all as specified. |
| 95 | All as per item No 12.02 here in before but leg complete all as specified. |
| 96 | Provn of new HW bracket/corner between leg and side rail all as specified |
| 97 | M&L for applying French polish glossy finish to all exposed wooden surfaces after preparation of surfaces with applying wood filler wherever requiredcomplete all as specified and as shown in drawing. |
| 98 | Chair Easy (FD-229) |
| 99 | Taking out old damaged/decayed front leg from its position and S & F new front leg in the same position as per existing shape and size made out of well seasoned ‘Teak Wood’ timber including providing hard rubber ring fixed with screws at the bottom of the leg including applying one coat of French polish over wood filler over exposed new timber surfaces complete all as specified and shown on drawing. |
| 100 | -Ditto- all as per item No 13.01 above but for rear leg and –ditto-. |
| 101 | Taking out old damaged/decayed back front top rail from its position and S & F new top rail in the same position as per existing shape and size made out of well seasoned ‘TEAK WOOD’ timber including making holes for re-canning including applying one coat of French polish over wood filler on exposed new timber surfaces complete as specified and shown on drawing. |
| 102 | -Ditto- all as per item Ser No 13.03 above but for side top rail (left/right) and -ditto-. |
| 103 | -Ditto- all as per item Ser No 13.03 here-in-before but for rear top rail –ditto-. |
| 104 | Taking out old damaged/decayed bottom side rail (right/left) from its position and S & F new side rail in the same position as per existing shape and size made out of well seasoned ‘TEAK WOOD’ timber including applying one coat of French polish over wood filler wherever required overexposed new timber surfaces complete as specified |
| 105 | -Ditto- all as per item Ser No 13.06 above but for front bottom rail and -ditto-. |
| 106 | -Ditto- all as per item Ser No 13.06 above but for rear bottom rail and -ditto-. |
| 107 | Taking out and removing all unserviceable worn out plastic cane from seat and back of chair easy and re-canning the same with new white plastic cane 2mm wide, 0.4mm thick oval type in seat and back by weaving and 4 mm wide for bordering complete. |
| 108 | Taking out old damaged/decayed hand rest from its position and S & F new hand rest in the same position as per existing shape and size made out of well seasoned ‘TEAK WOOD’ timber including applying one coat of French polish over wood filler over exposed new timber surfaces complete as specified as shown on drawing. |
| 109 | M & L for applying French polish glossy finish to exposed wooden surfaces including preparation of surfaces applying wood filler wherever required compete as specified |
| 110 | Table Writing (FD-33(M)/FD-249/ FD-275) |
| 111 | Taking out old damaged/decayed short legs from its position and S&F new short leg (right/left) in the same position as per existing shape and size made out well seasoned Teak Wood timber including applying one coat of french polish over wood filler over exposed new timber surfaces complete all as specified and as shown on drawing. |
| 112 | - Ditto - all as per Ser No 14.01 above but for rear leg (left/right) and - ditto -. |
| 113 | Taking out of old damaged/decayed plywood back from its position and S&F new 6mm thick commercial plywood 'B' grade BWR fixed in the same position as per existing shape and size including and applying one coat of French Polish over wood filler over on new plywood surfaces complete all as specified and as shown on drawing. |
| 114 | Taking out old damaged/decayed stiffener bottom (right/left/rear) from its postion and S&F new stiffener in the same postion as per existing shape and size made out of well seasoned 'Teak Wood' timber including applying one coat of French Polish over wood filler on exposed new timber surfaces complete all specified and as shown on drawing. |
| 115 | Taking out old drawer from its position and minor repair of the same which required for as directed and placing the drawer in old position complete all as specified and as on drawing. |
| 116 | Taking out old damaged/decayed front shutter of table writing from its position and S&F new front shutter made out of 18mm thick particle board with one face teak decorative face including 4mm thick teak wood beading all round and fixed with two Nos 50mm brass hinges including applying one coat of French Polish over wood filler on exposed new timber surfaces complete all as specified and as shown on drawing. |
| 117 | Taking out of old damaged sides (left/right) from its position and S&F new sides made out of 18mm thick with teak decorative teak veneered faced one side size 600mm x 560mm including 4mm thick teak wood beading on front side including applying one coat of French polish over wood filler on exposed new timber surfaces complete all as specified and as shown on drawing. |
| 118 | Taking out old damaged/decayed top from its postion and S&F new top as per existing shape and size made out of 18mm thick pre laminated particle board one side teak face and one side white balancing including 4mm thick teak wood beading all around complete all as specified |
| 119 | Taking out old damaged/decayed cupboard shelf from its postion and S&F new cupboard shelf in the same position as per existing shape and size made out of 12mm thick plywood commercial including 4mm thick teak wood beading in front side including applying one coat of French Polish to all exposed timber and plywood surface complete all as specified |
| 120 | Taking out unserviceable knob from its postion and S&F new 25mm dia knob CP in the same position with a new brass screw/nuts/bolts and washer complete all as specified and as shown on drawing. |
| 121 | (M&L for applying French Polish glossy finish to wooden surfcaes except top including preparation of surfaces and applying wood filler wherever required complete all as specified and as shown on drawing. |
| 122 | Table Bed Side (FD-276 & FD/E6/MAP/15(R)) |
| 123 | Taking out old damaged decayed top from its position and S&F new top in the same position as per existing shape and size made out of 18/19mm thick commercial particle board covered with 1mm thick plastic laminated sheet of mysore teak face to top fixed with adhesive as per manufactures instruction including 4mm thick teak wood beading all round complete all as specified and as shown on drawing. |
| 124 | Taking out old damaged decayed side from its position and S&F new side in the same position as per existing shape and size made out of 18/19mm thick particle board grade-I quality interior grade decorative teak veneered face one side including 4mm thick teak wood beading on front side including applying one coat of french polish over wood filler over exposed new timber surface complete all as specified and as shown on drawing. |
| 125 | Taking out old damaged/ decayed shelf from its position and S&F new shelf in the same position as per existing shape and size made out of 18/19mm thick commercial particle board with teak wood beading on front side including applying one coat of french polish over wood filler over exposed new timber surface complete all as specified and as shown on drawing. |
| 126 | Taking out old damaged decayed Plywood back from its position and S&F new 6mm thick commercial plywood grade BWR in the same position as per existing shape and size including applying one coat of french polish over wood filler over one new plywood surfaces complete all as specified and as shown on drawing. |
| 127 | Taking out old damaged/ decayed bottom base from its position and S&F new bottom base in the same position as per existing shape and size made out of 18/19mm thick commercial particle board complete all as specified and as shown on drawing. |
| 128 | Taking out old damaged/decayed pull out tray/top drawer from its position and S&F new pull out tray/top drawer in the same position as per existing shape and size all as specified and as shown on drawing. |
| 129 | -Ditto- as per item Ser No 15.06 above but for bottom drawer and -ditto-. |
| 130 | S&F shoes in repair new hard rubber shoes in leg complete all as specified |
| 131 | Taking out old damaged/decayed handle/knob from pull out tray/top drawer from its position and S&F new square 'D' type 100mm long (4') steel handle as approved by GE in the same place complete all as specified |
| 132 | M & L for applying french polish glossy finish to all exposed wood surface including inner surface of plywood after preparation of surfaces and applying wood filler wherever required complete all as specified and as shown on drawing. |
| 133 | Almirah Mess Utensil (FD-93(M) ) |
| 134 | Taking out old damaged/ decayed legs from its posn and S&F new leg as per existing shape and size in the same position made out of well seasoned `KALASIRIS' timber including applying one coat of french polish over wood filler on all exposed timber surface complete all as specified and as shown on drawing. |
| 135 | -Ditto- as per item Ser No 16.01 above but for long rail. |
| 136 | -Ditto- as per item Ser No 16.01 above but for short rail. |
| 137 | Taking out old unserviceable/ decayed back ply from its posn and S&F new back plywood in the same posn of 8/8mm thick commercial grade BWR type as per the existing shape and size complete all as specified and as shown on drawing. |
| 138 | Taking out old damaged/ decayed door shutter (Right/Left) made out of 18/19mm thick pre-laminated particle board exterior grade both side teak face including S & F well seasoned 4mm thick teak wood beading all round and fixed with brass hinges 50mm long (Type E-II) with brass screw complete including applying one coat of french polish over wood filler on all exposed timber surfaces all complete as specified and as shown on drawing. |
| 139 | Taking out old damaged/broken aluminium `D' handle from its posn and S & F new aluminium anodised 100mm long `D' handle as per existing shape and size with new aluminium screws in the same posn complete all as specified and as shown on drawing. |
| 140 | M & L for applying french polish glossy finish to all exposed timber surfaces after preparation of surfaces over wood filler wherever required complete all as specified and as shown on drawing. |
| 141 | Table Dressing Gents with Mirror (FD/E6/MAP/16) |
| 142 | Taking out old damaged/decayed legs from table dressing gents and S&F new legs in the same position as per existing shape and size made out of well seasoned hard wood teak complete all as specified and as shown on drawing. |
| 143 | All as per item No 17.01 above but mirror frame and -ditto- |
| 144 | Taking out old damaged /decayed back ply wood from its position and S&F new 12mm thick plywood BWR grade as per exsiting shape and size complete all as specified and as shown on drawing. |
| 145 | All as per Ser No 17.03 above but back plywood of mirror frame and -ditto- |
| 146 | Taking out old damaged /decayed frame of table dressing gents (Top, bottom and sides of each frame) from its position and S&F new frame (top, bottom and sides) of same as per existing shape and size made with 18mm thick plywood BWR grade with 0.9mm thick sunmica for outer surface incl 4mm thick wooden beading on all around complete all as specified and as shown on drawing. |
| 147 | S&F in repair glass shelves to existing position with provide glass holder as per existing shape and size complete all as specified and as shown on drawing. |
| 148 | Taking out old broken/decayed mirror from its position and S&F new 5.5mm thick looking mirror of the same as per existing shape and size complete all as specified and as shown on drawing. |
| 149 | Taking out old unsv hinges from its position and S&F new long piano continous type hinges as per existing shape and size complete all as specified |
| 150 | S&F in repair magnetic catcher fixed to inner portion of side frame for holding of door/mirror frame complete all as specified |
| 151 | M&L for applying French polish to wood/ wooden base surface with one or more coat till glossy finish achieved to match with existing surface (wood/woodbase) and remove the all dirt/dust etc from existing/ replaced parts before polish and applying wood filler whenever required complete all as specifed and shown on drawing. |
| 152 | Table Dressing Gents with Mirror (FD 31(M) /230) |
| 153 | Taking out old damaged/decayed top from Table dressing gents and S&F new Top in the same position as per existing shape and size made out of 12 mm thick plywood commercial with 4mm thick teak wood edging on front side covered with 1mm thick plastic laminated sheet teak colour fixed with approved adhesive as per manufactions complate all as specified and as shown on drawing . |
| 154 | Taking out old damaged/decayed back plank from its position S&Fnew plank 12mm thick made of well seasoned KALASIRIS |
| 155 | Taking out old damaged/decayed drawer from its position and S&F new drawer of the same size made of well seasoned KALASIRISH timber and 6mm thick plywood commercial gde -I quality at bottom of drawer complete all as specified and as shown on drawing. |
| 156 | Taking out old damaged/decayed knob and S&F new knob of 25mm round chromium plated best quality as approved fixed in the drawer with new nuts/ screws completeall as specified and as shown on drawing. |
| 157 | Taking out old damaged / decayed bottom planks from its position and S&F new bottom planks of 12mm thick well seasoned KALASIRISH timber as per existing shape and size complete all as specified and as shown on drawing. |
| 158 | --------Ditto--------all as per item No 18.05 abov but for side planks --------do------ |
| 159 | taking out old damaged/decayed back ply from mirror frame and S&F new back ply 6mm thick -gde-I commercial all as per existing shape and size complete all as specified and as shown on drawing. |
| 160 | Taking out old UNSV miroor from its posn and S&F new miroor of size 380x760mmx 5.5mm thick make .golden fish /equivalent fixed in the old position complete all as specifed and as shown on drawing. |
| 161 | (Taking out old damaged Miroor frame its posn and S&F new miroor frame made of well seasoned KALASIRISH timber as per existing shape and size including key plate of F-I 3mm thick and 5mm thick plywood back grde on quality exterior gde complete all as specified and as shown on drawing. |
| 162 | M&L for applying French polish to wood/ wooden base surface with one or more coat till glossy finish achieved to match with existing surface (wood/woodbase) and remove the all dirt/dust etc from existing/ replaced parts before polish and applying wood filler whenever required complete all as specifed, and shown on drawing. |
| 163 | Table Dressing Ladies with Mirror (FD/MAP-II/07) |
| 164 | Taking out old damaged / decayed top from its position and S&F new top as per existing shape and size in the same position made out of 18/19mm thick pre-laminated particle board exterior grade decorative teak glossy finish with wooden beading complete all as specified and as shown on drawing. |
| 165 | All as per item No 19.01 above but sides and -ditto- |
| 166 | All as per item No 19.01 above but front shutter with long steel piano type hinges and -ditto- |
| 167 | All as per item No 19.01 above but sides of stool and -ditto- |
| 168 | Taking out old damaged / decayed bottom from its position and S&F new bottom as per existing shape and size in the same position made out of 12mm thick plywood BWR grade with 0.9mm thick sunmica inner side all as specified and as shown on drawing. |
| 169 | All as per item No 19.05 above but seat ply of stool with one coat of french polish and -ditto- |
| 170 | All as per item No 19.05 above but back ply of table with 18mm thick plywood BWR grade with one coat of french polish and -ditto- |
| 171 | All as per item No 19.05 above but back ply of mirror frame made with 6mm thick plywood BWR grade and -ditto- |
| 172 | Taking out old damaged / decayed / broken mirror frame from its position and S&F new frame as per existing shape and size in the same position made out of well seasoned teak wood complete all as specified and as shown on drawing. |
| 173 | Taking out old damaged / broken mirror from its position and S&F new mirror of size 5mm thick in the same position all as specified and as shown on drawing. |
| 174 | Taking out old damaged / decayed drawer from its position and S&F new drawer complete all as specified and as shown on drawing |
| 175 | Taking out old damaged / decayed handle from drawer/shutter and S&F new square 'D' type 75 mm long steel handle as approved by GE the same place, complete all as specified and as shown on drawing |
| 176 | Taking out old damaged / broken Magnatic Catcher from its position and S&F new Magnatic catcher with stainless of same size and shape complete all as specified and as shown on drawing |
| 177 | Remove old damaged/unsv foam cushion from its position and S&F new 75mm thick foam 40 density cushion covered with leathrite as per shape and size complete all as specified and as shown on drawing |
| 178 | Taking out old damaged / decayed Revolving Nylon double wheel from its position from stool and S&F new Heavy duty revolving nylon double wheel of 50mm dia of same size and shape complete all as specified and as shown on drawing |
| 179 | S&F in repair new long/short stiffner at bottom of table dressing ladies made out of 50mm x 30mm section hard wood teak including applying one coat of French polish glossy finish complete all as specified |
| 180 | M&L for applying French polish to wood/ wooden base surface with one or more coat till glossy finish achieved to match with existing surface (wood/woodbase) and remove the all dirt/dust etc from existing/ replaced parts before polish and applying wood filler whenever required complete all as specifed, shown on drawing. |
| 181 | Chair Dining Officers (FD-357/ FD/MAP-II/04) |
| 182 | Replacement of old/us Rear legs and S&F new Rear legs made of 1st class teak wood all as specified and shown in drg. |
| 183 | Replacement of old/us front legs and S&F new Front legs made of 1st class teak wood all as specified and shown in drg. |
| 184 | Replacement of old/us side rail and S&F new side rail made of 1st class teak wood all as specified and shown in drg. |
| 185 | Replacement of old/us back rail and S&F new back rail made of 1st class teak wood all as specified and shown in drg. |
| 186 | Replacement of old/us Bottom Stiffeners support and S&F new Bottom Stifferners made of 2nd class teak wood all as specified and shown in drg. |
| 187 | Replacement of old/us Back Strip and S&F new Back strip made of 1st class teak wood all as specified and shown in drg. |
| 188 | Replacement of old/us Bracket/corner and S&F new wooden bracket/corner to provide support to legs. |
| 189 | Replacement of old/us PVC shoe and S&F new PVC shoe superior quality all as specified and shown in drg. |
| 190 | Replacement of old/us seat and S&F new seat made of foam 40 density duly covered with tapestry cloth with fixed over 12mm Plywood of BWR Grade ISI Marked confirming to IS-303 complete all as specified and shown in drg complete all as specified . Note : Rate of tapestry cloth shall not be less than Rs 550/-RM and colour and texture of tapestry shall be approved |
| 191 | M & L for applying two or more coats of French polish glossy finish to all wooden surfaces of chair dining both old and new surfaces after necessary preparation of surfaces including wood filler to complete all as specified and as shown in drawing. |
| 192 | Chair Dining JCO/OR (FD/MAP-II/ 05) |
| 193 | Taking out old damaged/decayed front leg from its position and S & F new front leg as per existing shape and size in the same position made out of well seasoned ‘TEAK WOOD’ timber including Hard rubber ring complete all as specified and as shown on drawing. |
| 194 | All as per item Ser No 21.01 here-in-before but for rear leg complete all as specified. |
| 195 | Taking out old damaged/decayed seat rail (Front, back and sides) (left/right) from its position and S & F new seat rail in the same position as per existing shape & size made out of well seasoned ‘TEAK WOOD’ timber complete all as specified and as shown in drawing. |
| 196 | Taking out old damaged/decayed leg stiffener from its position and S & F new leg stiffener as per existing shape and size in the same position made out of well seasoned ‘TEAK WOOD’ timber complete all as specified and as shown in drawing. |
| 197 | All as per item Ser No 21(d) here-in-before but for back rest complete all as specified. |
| 198 | Taking out and removing all unserviceable worn out PVC seat frame of Chair Dining JCOs/OR and S&F new PVC seat frame complete all as specified and as shown in drawing with additional support to PVC seat of a wooden stiffener in centre under seat. |
| 199 | Replacement of old/us PVC shoe and S&F new PVC shoe superior quality all as specified and shown in drg. |
| 200 | M & L for applying French polish glossy finish to all wooden surfaces both old and new surfaces after necessary preparation of surfaces including wood filler to complete all as specified and as shown in drawing. |
| 201 | Almirah Large Steel (FD-67(M)/FD-1033) |
| 202 | M & L for taking out loose leg (right/left) and re-fixing the same in existing position with necessary run welding of Almirah large complete all as specified .(Note :- Thickness of metal to be welded shall not exceed 2 mm). |
| 203 | Taking out and removing the old damaged bottom leg (right/left) and S & F new bottom leg made out of 20 gauge plain mild steel sheet (MS Sheet), made existing shape and fixed in the same position by run welding including painting with one coat OG synthetic enamel paint (1st grade quality) over a coat of red oxide primer by spray machine complete all as specified |
| 204 | Taking out loose shelf from Almirah large steel and re-fixing the same rigidly after minor repairs by providing new chips, nut & bolts of existing size as required complete all as specified |
| 205 | M & L for run welding in repairs to broken/damaged sides (left/right), back & top of almirah steel large complete all as specified (Note :- Thickness of materials to be welded not exceeding 2 mm in thickness and length of each welding exceeding 9 mm but not exceeding 20 mm in length.) |
| 206 | Repair of existing loose hinges by spot welding and make it functional by providing new steel pin including greasing etc required for smooth function complete all as specified |
| 207 | Taking out and removing existing unserviceable damaged lock from almirah (Large steel) and S & F new 6 lever steel lock as per existing shape and size with Keys in duplicate complete all as specified |
| 208 | Taking out old and removing old unserviceable handle from Almirah steel large and S & F steel chromium plated handle 125mm long of existing shape and size complete all as specified and shown on drg. |
| 209 | Taking out and removing of old broken/damaged steel door shutter with necessary cutting in square/rectangle in shape and S & F the same shutter as per existing size and shape not exceeding 100 sq cm each made out of 20 Gauge plain mild sheet (MS Sheet) fixed by run welding of required length including applying applying one coat of synthetic enamel paint (1st grade quality) over a coat of red oxide primer by spray machine all complete as specified |
| 210 | Taking out old unserviceable/damaged bottom shelf from its position and S & F new bottom shelf as per existing shape and size made out of 20 Gauge Plain mild sheet (MS Sheet) and fixed in the same position with shelf clips, nut and bolts etc including painting with one coat of OG synthetic enamel paint (1st grade quality) over a coat of red oxide primer by spray machine before fixing complete all as specified and shown on drawing. |
| 211 | Taking out old unserviceable/damaged intermediate shelf from its position and S & F new intermediate shelf as per existing shape and size made out of 20 Gauge Plain mild steel sheet (MS Sheet)by providing new hinges and make it smooth functional including applying painting with one coat of OG synthetic enamel paint (1st grade quality) over a coat of red oxide primer by spray machine before fixing complete all as specified and shown on drawing. |
| 212 | Taking out and removing of old broken/damaged steel of door shutter (left/right) from almirah large steel and S&F new door shutters as per shape and size made out of 20 Gauge plain mild sheet (MS Sheet)by providing new hinges and make it smooth functional including applying one coat of synthetic enamel paint (1st grade quality) over a coat of red oxide primer by spray machine all complete as specified and as shown on drawing. |
| 213 | M & L for painting to Almirah Steel large by spraying on both side (outer/inner surface) including legs, door shutter and shelves with applying two coats of OG synthetic enamel paint (1st grade quality) by spray machine including preparation of old painted surfaces including applying ready made putty wherever required for making good cavities complete all as specified |
| 214 | Almirah Medium Steel (FD-67(M)/FD-1032) |
| 215 | M & L for taking out loose leg (right/left) from its position and re-fixing the same in existing position with necessary run welding of Almirah medium steel complete all as specified.(Note :- Thickness of metal to be welded shall not exceed 2 mm). |
| 216 | Taking out and removing the old damaged bottom leg (right/left) from its position and S & F new bottom leg made out of 20 gauge plain mild steel sheet (MS Sheet), made existing shape and fixed in the same position by run welding including painting with one coat OG synthetic enamel paint (1st grade quality) over a coat of red oxide primer complete all as specified |
| 217 | Taking out loose shelf from Almirah medium steel and re-fixing the same rigidly after minor repairs by providing new chips, nut & bolts of existing size as required complete all as specified |
| 218 | M & L for run welding in repairs to broken/damaged sides (left/right), back & top of almirah medium steel complete all as specified (Note :- Thickness of materials to be welded not exceeding 2 mm in thickness and length of each welding exceeding 9 mm but not exceeding 20 mm in length.) |
| 219 | Repairing of existing loose hinges by spot welding and make it functional by providing new steel pin including greasing etc required for smooth function complete all as specified |
| 220 | Taking out and removing existing unserviceable damaged lock from almirah medium steel and S & F new 6 lever steel lock as per existing shape and size with Keys in duplicate complete all as specified |
| 221 | Taking out and removing old unserviceable handle from Almirah medium steel and S & F steel chromium plated handle 125mm long of existing shape and size as approved complete all as specified and shown on drawing. |
| 222 | Taking out and removing of old broken/damaged steel of door shutter with necessary cutting in square/rectangle in shape and S & F the same as per existing size and shape not exceeding 100 sq cm each made out of 20 Gauge plain mild steel sheet (MS Sheet) fixed by run welding of required length including applying one coat of synthetic enamel paint (1st grade quality) over a coat of red oxide primer by spray machine all complete as specified |
| 223 | Taking out old unserviceable/damaged bottom shelf from its position and S & F new bottom shelf as per existing shape and size made out of 20 Gauge Plain mild steel sheet (MS Sheet) and fixed in the same position with shelf clips, nut and bolts etc including painting with one coat of OG synthetic enamel paint (1st grade quality) over a coat of red oxide primer by spray machine before fixing complete all as specified and shown on drawing. |
| 224 | Taking out old unserviceable/damaged intermediate shelf from its position and S & F new intermediate shelf as per existing shape and size made out of 20 Guage Plain mild steel sheet (MS Sheet) and fixed in the same position with shelf clips, nut and bolts etc including painting with applying one coat of OG synthetic enamel paint (1st grade quality) over a coat of red oxide primer by spray machine before fixing complete all as specified and shown on drawing. |
| 225 | Taking out and removing of old broken/damaged steel of door shutter (left/right) from almirah medium steel and S&F new door shutters as per shape and size made out of 20 Gauge plain mild sheet (MS Sheet)by providing new hinges and make it smooth functional including applying one coat of synthetic enamel paint (1st grade quality) over a coat of red oxide primer by spraying all complete as specified and as shown on drawing. |
| 226 | M & L for painting to Almirah Medium Steel by spray machine on both side (outer/inner surface) including legs, door shutter and shelves with two coats of OG synthetic enamel paint (1st grade quality) including preparation of old painted surfaces including applying ready made putty wherever required for making good cavities complete all as specified |
| 227 | Chair CB Steel with Arm (FD-75(M)) |
| 228 | M & L for spot welding to damaged/broken steel frame of chair CB steel including arms complete all as specified and as shown on drawing. (Note :- Length of each spot welding 4cm in length and not exc. 2mm in thickness.) |
| 229 | Taking out old rusted/damaged/broken flat iron support of chair CB steel with arms and S&F new mild steel flat iron of size 20 x 5mm, 75mm long to bottom of steel frame in support of wooden seat frame duly welded with making hole for fixing screw complete all as specified and as shown on drawing. |
| 230 | Taking out old damaged/broken arm rest and S & F new arm rest in the same position as per existing shape and size made out of well seasoned first class hard wood ‘TEAK WOOD’ timber including applying two coat of black paint over wood filler on all exposed new wooden surfaces after preparation of new wooden surfaces complete all as specified and as shown on drawing. |
| 231 | Taking out old damaged/broken seat frame and S & F new seat frame in the same position as per existing shape ande size made out of well seasoned first class hard wood ‘TEAK WOOD’ timber with making holes of weaving slightly rounded on the edges and applying two coat of black paint over wood filler on all exposed new wooden surfaces of seat and back shall be painted with high glossy paint after preparation of new wooden surface including recanning with plastic cane to seat of chair cane bottom steel with arm with white colour half round (Godrej pattern with oval type 2mm wide 0.4mm thick for weaving and 4mm wide for bordering and 0.4mm thick gola type weighing not less than 6 gms per 10 running meters complete all as specified and as shown on drawing. |
| 232 | All as per ser item No 24.04 here in before but back frame complete all as specified. |
| 233 | Taking out old unserviceable top cap and S&F new plastic cap of best quality in the same position complete all as specified. |
| 234 | M & L for applying painting to steel frame of chair CB steel with arms with two coats of OG synthetic enamel paint (1st grade quality) after necessary preparation of old painted surfaces by spray machine over one coat of redoxide primer complete all as specified and as shown on drg. |
| 235 | Taking out old unserviceable shoe & S&F hard rubber shoe with screw as approved make complete all as specified and as shown on drawing. |
| 236 | Chair Writing (FD/E6/MAP/12) |
| 237 | Taking out old damaged / decayed tapestray cloth from seat and back of chair and replace it with new tapestray cloth as per existing shape after approval of tapestray cloth, including pvc lapping border complete all as specified and shown on drg. (Note : The cost of tapestray cloth should be min of Rs. 290/- per mtr). |
| 238 | Taking out old damaged/decayed seat/back of chair and S&F new seat/back, shall be of 12 mm thick hot pressed plywood up hoistered with febric and moulded polyurethane foam (shall be 50 mm thick and moulded with density 50.55 kg per cubic mtr) with pvc lappeing all around as per existing shape after approval of tapestary cloth complete all as specified. (Note : The cost of tapestray cloth should be min of Rs. 290/- per mtr). |
| 239 | Taking out old damaged/decayed steel frame (pipe) of chair and replace it with new MS pipe 25mm dia 2mm thick as per existing shape and size incl provide MS Flat with making holes for fixing handles complete all as specified and shown on drg. |
| 240 | Taking out old damaged/decayed handle from chair and sypply and fixing of arms made out of black integral skin polyurethane with 75-85 shore 'A' hard ness and reinforced with MS insert along with nut & bolt where reqd to chair writing all as shown on drg. |
| 241 | M&L for spot welding to damaged/broken steel frame of chair writing complete all as specified and as shown on drawing. ( Length of each spot welding 4cm in length and exc. 2mm in thickness.) |
| 242 | Taking out old unserviceable hard PVC Shoes & S&F new hard PVC shoes as approved complete all as specified and as shown on drawing. |
| 243 | Taking out old damaged / decayed flat iron and replace it with new flat iron to chair writing duly run welding at bottom of steel frame for support of seat frame, the flat iron shall be 25mm width x 5mm thick and 500 mm long with making holes for fixing screw and applying one coat of red oxide primer complete all as specified and as shown on drawing. |
| 244 | M&L for preparation of old painted steel surfaces of chair writing and applying two coats of black enamel paint (1st grade quality) on all exposed steel surfaces complete all as specified. |
| 245 | Chair Verandah (FD/MAP-II/ 06, FD/MAP-II/ 15) |
| 246 | M&L for spot welding in repairs not exc 2.50cm in length of broken steel frame complete all as specified and as shown in drawing.(Note : Material to be weled not to exceed 2.00mm in thickness) |
| 247 | M&L for applying two coats of white synthetic enamel paint (Ist grade quality) on all exposed steel surface of chair verandah including preparation of old painted surface complete all as specified and as shown in drawing. |
| 248 | Taking out old existing damaged / broken seat frame of chair verandah and Supply & fix the same with new seat frame complete all as specified and as shown in drawing. |
| 249 | Taking out old existing damaged / broken back frame of chair verandah and Supply & fix the same with new back frame complete all as specified and as shown in drawing. |
| 250 | Table Office Clerk Steel (FD-84(M)/ FD-1004) |
| 251 | M & L for spot welding of broken steel frame and drawer of table office clerk steel complete all as specified.(Note :- Each spot shall not exc. 5cm in length and not exc. 2mm in thickness.) |
| 252 | Taking out old unserviceable lock from drawer and S & F new 6 lever steel lock with keys in duplicate and and fixed in same position with smooth functioning complete all as specified. |
| 253 | Taking out old damaged/broken top from table office clerk steel and S & F new table Top in the same position as per existing shape and size made out of 18/19 mm thick plywood BWR grade pasted with 1mm thick decorative laminate type-1 fixed with new screws including providing 4mm 1st class well seasoned teak wood beading all round complete all as specified and as shown on drawing. |
| 254 | S & F new rubber shoes, best quality at the bottom of leg after taking out old damaged/unserviceable shoes from its existing position complete all as specified and as shown on drawing. |
| 255 | M & L for preparation of old painted steel surfaces of table office clerk and applying two coats of olive green synthetic enamel paint (1st grade quality) on all exposed steel surfaces including drawer by spray machine after preparation of old painted steel surfaces complete all as specified and as shown on drawing. |
| 256 | Table Office Officer Steel (FD-84(M)/ FD-1003) |
| 257 | M & L in repair to broken steel frame and drawer of table office offrs steel by spot welding complete all as specified .(Note :- Each spot shall not exc. 5cm in length and not exc. 2mm in thickness.) |
| 258 | Taking out old unserviceable drawer locks from existing position and S & F new steel lock 6 liver with keys in duplicate and making the drawer functional complete all as specified. |
| 259 | Taking out old unserviceable/damaged top from table office offrs steel and S & F new top of required shape and size made out of 18/19 mm thick plywood BWR grade pasted with 1mm thick decorative laminate type-1 fixed with new screws including providing 4mm 1st class well seasoned teak wood beading all round complete all as specified and as shown on drawing. |
| 260 | Taking out old unserviceable rubber shoes from the bottom of leg and S & F new rubber shoes of approved best quality in the existing position complete all as specified as shown on drawing. |
| 261 | M & L for preparation of old painted steel surfaces of table office offrs and applying two coats of OG synthetic enamel paint (1st grade quality) on all exposed steel surfaces including drawerby spray machine complete all as specified and as shown on drawing. |
| 262 | Locker Bed Side Steel (FD-1029) |
| 263 | M & L in repair to broken/damaged bottom leg of locker bed side steel by spot welding complete as specified . (Note : Thickness of metal to be welded shall not exceed 2mm.) |
| 264 | Removing the old damaged bottom leg (Right/Left) and S & F new bottom leg made out of 20 gauge plain mild steel sheet (MS sheet) fixed in the same position by spot welding including painting with applying one coat of olive green synthetic enamel paint (1st grade) over a coat of red oxide primer by spray machine complete after preparation of new steel surfaces all as specified and as shown in drg. |
| 265 | Taking out loose shelf from of locker Bed Side Steel and refixing the same position rigidly after minor repairs by providing new clips, nut and bolts as required complete all as specified. |
| 266 | Taking out existing unserviceable hasp and stapple and S & F new hasp and staple of 100mm long chromium mild steel to front shutter of approved make and design complete all as specified and as shown on drg. |
| 267 | Repairing of existing unserviceable hinges by spot welding and make it functional by providing pin/greasing etc. complete all as specified. (Note :- Each spot welding shall not be more than 2.5cm in length and materials to be welded not exceeding 3mm in thickness). |
| 268 | Removing of old handles from the front of shutter and S & F new 115mm long chrome plated handle of approved make and design complete all specified and as shown on drawing. |
| 269 | Taking out of old unserviceable broken curtain rod and S & F new curtain rod of aluminium 19/20mm dia with steel brackets both sides in the same position by spot welding including painting with applying one coat of OG synthetic enamel paint (1st grade) over a coat of red oxide primer by spray machine over steel brackets after preparation of new steel surfaces complete all as specified and as shown on drawing. |
| 270 | Taking out old unserviceable/damaged bottom shelf and S & F new bottom shelf as per existing shape and size made out of 20 gauge plain mild steel sheet (MS sheet) and fixed in the same position with shelf clips, nuts & bolts etc including applying painting with one coat of Olive green synthetic enamel paint (1st grade) over a coat of red oxide primer by spray machine before fixing and after preparation of new steel surfaces complete all as specified and shown on drawing. |
| 271 | Taking out old unserviceable/damaged intermediate shelf and S&F new intermediate shelf as per existing size and shape made out of 20 gauge plain mild steel sheet ( MS Sheet) and fixed in the same position with shelf clips, nuts and bolts etc including painting with one coat of olive green synthetic enamel paint (1st grade) over a coat of red oxide primer by spray machine before fixing after preparation of new steel surfaces complete all as specified and as shown in drawing. |
| 272 | Taking out old unserviceable/damaged inside partition of locker bed side steel and S&F new partition made out of 20 gauge plain mild steel sheet (MS sheet) fixed in the same position as per existing shape and size by spot welding including painting with one coat of olive green synthetic enamel paint over a coat of red oxide primer by spraying after preparation of new steel surfaces complete all as specified and as shown in drawing. |
| 273 | Taking out old unserviceable/damaged door shutter (Left/Right) from its position and S & F new door shutter as per existing shape and size made out of 20 gauge plain mild steel sheet (MS sheet) by providing new hinges and make it smooth functional including painting with one coat of OG synthetic enamel paint over a coat of red oxide primer by spraying after preparation of new steel surfaces complete all as specified and shown on drawing. |
| 274 | M & L for applying painting to locker bed side steel by spray machine on both side (outer and inner surfaces) including legs, door shutters, partition and shelves with two coats of OG synthetic enamel paint (1st grade quality) including preparation of old painted surfaces including applying ready made putty wherever required to fill up the cavities complete all as specified and shown on drawing. |
| 275 | Charpoy IP with Hard Top (FD/MAP-II/ 01) |
| 276 | Taking out old damaged / broken plywood from its position and refixing the same with new 12mm thick BWR grade, ISI marked, conforming to IS: 303-1989 (size 1950 mm x 900 mm) shall be fixed through screw with MS cleat & stiffener with cup and washer all as specified |
| 277 | Taking out old damaged / broken stiffener from its position and refixing the same with new stiffener of size 25mm x 25mm x 16 guage MS tube shall be fixed through spot welding all as specified (Note : Thickness of metal to be welded shall not exceed 2mm.) |
| 278 | S&F new rubber shoes of best quality to the bottom of leg after taking out old damaged / unserviceable shoe from its existing position complete all as specified and as shown on drawing. |
| 279 | M&L for two coats of Black synthetic enamel paint (1st grade quality) on all exposed steel surface of Charpoy hard top complete all as specified |
| 280 | Bed hard MAP (FD/E6/MAP/08R) |
| 281 | Taking out old damaged/broken plywood from its position and refixing the same with new 12mm thick plywood (BWR grade) 07 layer shall fixed with counter sunk nut, bolts and washer as per existing shape and size all as specified and shown on drawing. |
| 282 | Taking out old damaged/ broken stifferner from its position and refixing the same with new stiffener of size 25mmx 25mm x16 guage MS tube shall be fixed through spot welding and making holes for fixing ply with nut and bolts all as specified and shown on drawing. (Note :- Thickness of metal to be welded shall not exceed 2 mm). |
| 283 | All as per item ser No 31.02 above but long rail of size 65mm x25mm x 16 guage MS Tube and -ditto-. |
| 284 | All as per item ser No 31.02 above but short rail of size 65mm x25mm x 16 guage MS Tube and -ditto-. |
| 285 | All as per item ser No 31.02 above but leg of size 32mm x 32mm x 16 guage MS Tube and -ditto-. |
| 286 | S&F in repair new hard rubber/PVC shoes of best quality to the bottom leg complete all as specified and as shown on drg. |
| 287 | Taking out old damaged/broken Head Board / Foot Board from its position and S&F new head board / foot board made with 18 mm thick pre laminated particle board decorative with natural teak finish both side with 1 mm thick laminated beading complete all as specifed |
| 288 | M&L in repairs to broken steel frame by spot welding not exc 2.5 cm in length complete all as specified as shown on drawing. (Note :- Thickness of metal to be welded shall not exceed 2 mm). |
| 289 | M&L for painting to Bed hard steel by spray machine on complete surface with two coats of Black synthetic enamel paint (1st grade quality) including preparation of old painted surfaces including applying ready made putty and red oxide primer wherever required complete all as specified |
| 290 | Chair school with hand board (FD/E6/MAP/05) |
| 291 | Taking out old damaged/decayed top from its position and S&F new Top made out of 18mm thick plywood BWR grade with 0.9 mm thick sunmica decorative natural teak glossy finish including wooden beading all around fixed with MS wood screw complete all as specified and as shown on drawign. |
| 292 | Taking out old damaged/decayed PVC back and seat in one piece from its position and S&F new PVC back and seat in one piece fixed with screw (make - blow plast or equivalent as approved by GE) complere all as specified and as shown on drawing. |
| 293 | Taking out old damaged/decayed hollow steel pipe with hinges from its position and S&F (RHS) Hollow steel pipe 25mm dia with hinges, inserted to frame and fixed to frame for slide on rod for adjustment of openable table top, complete all as specified and as shown on drawing. |
| 294 | M&L for repair of chair school with spot welding or minor repair and make it serviceable condition complete all as specified as shown on drawing. (Note :- Thickness of metal to be welded shall not exceed 2 mm). |
| 295 | S&F in repair new hard rubber/PVC shoes of best quality to the bottom leg complete all as specified and as shown on drg. |
| 296 | M&L for painting of steel frame of chair school by spray machine on complete surface with two coats of Black synthetic enamel paint (1st grade quality) including preparation of old painted surfaces including applying ready made putty and red oxide primer wherever required complete all as specified |
| 297 | Charpoy GI Pipe Ply Top (FD-220) |
| 298 | Taking out old damaged / broken plywood from its position and refixing the same with new 12mm thick BWR, ISI marked, conforming to IS: 303-1989 (size 1950 mm x 900 mm) shall be fixed through screw with MS cleat & S&F stiffners made out of flat iron 40 X 5mm x 900 mm long (each) shall be fixed with GI nuts, bolts, washers of appropriate size as directed between the long rails all as specified |
| 299 | S & F in repairs 32mm dia ISI medium grade of approved make, long rail for GI Charpoy pipe including removing unserviceable long rail, rest all as shown on drg |
| 300 | Making short rail for GI Charpoy obtained from item No. 18(a) above here-in-before cut in to length and threading including removing of existing unserviceable short rails all as specified |
| 301 | Making leg for GI charpoy from short rail obtained from item No. 18(b) above here-in-before end threading other end provided with plate welded at bottom and fixed in repairs as required as per drg. |
| 302 | Removing existing old unserviceable elbow and check nut each from charpoy GI pipe and supply & fix new GI elbow and chuck nut each to charpoy GI pipe complete all as specified Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 22, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Oct 15, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Completed
Oct 27, 2026
18:00 IST
Corrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 1 day
Oct 22, 2026
18:00 IST
Corrigendum-3 Issued
Clarifications on tender conditions and amendments issued.
CompletedOct 27, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 dayOct 31, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender