Tender For Repair/Maint To Joineries Flooring Roof Treatment And Other Allied Works At Sanjog Chhetri Vihar Age B/R-Ii Under Ge (East) Lucknow
Tender Value
35 Lakhs
Estimated cost
Bid Submission
07 Oct 2026
18 days left
EMD
70000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Lucknow → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/Maint To Joineries Flooring Roof Treatment And Other Allied Works At Sanjog Chhetri Vihar Age B/R-Ii Under Ge (East) Lucknow
BOQ
| Sl. No. | Item Description |
| 1 | Note for all items :-(i) The buildings in this area are multi-storied (Triple storied), and materials labour & scaffoldings (if required) shall be shifted and provided by contractor at his own cost. No extra payment shall be maid / considered on this account. (ii) Unit rates shall be also deemed inclusive quoted unit rate for providing of safety gears, ladders, ropes, harness etc. |
| 2 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) area n.exc 1.50 sqm each, and removing from site, all as specified and directed. |
| 3 | Taking down chowkats or frames with shutters (without taking off shutters from the frame) area exc 1.5 Sqm but not exc 4 Sqm each and removing from site all as specified and directed. |
| 4 | Taking down shutters of any description exc 1.00 sqm but not exc 2.00 Sqm each all as specified and directed |
| 5 | S&F mild steel framed work as in doors or gates of angle or other section drilled for fixing of steel sheeting or other covering doors etc to be prepared for hanging or sliding with and including either hooks and stainless steel hings, Fe-410W (Gde-E-250) quality-A, complete all as specified and directed. |
| 6 | S&F 1 mm thick Mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required |
| 7 | Taking down existing MS gate shutters and rexing in the same opening after necessary weldings, repairs to bush, holdfast etc and making the shutter functional, area of each shutter n.exc 4 sqm each complete all as specified and as directed. |
| 8 | S&F pressed steel frame for door with one or more rebates of size 125x60mm including necessary fixing lugs,Hinge lock striking plates,hold fasts etc. , size /profile of frame as per IS and including plain cement concrete cast in situ Type B1 1:2:4 (20 mm graded aggregate) as in copings, hold fast, back filling of pressed steel frame complete all as specified & directed. |
| 9 | S&F pressed steel frame for door with one or more rebates size 105x60mm including necessary fixing lugs,hinge, lock striking plates ,hold fast ,etc. complete size /profile of frame as per IS complete all as specified and directed. |
| 10 | S&F 30mm thick factory made flush shutters solid core construction with block board core and ply wood face panels, commercial type on both sides, complete all as specified and directed. |
| 11 | S&F 35 mm thick 2nd class hardwood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats all as specified and directed. |
| 12 | S&F factory made solid PVC door frames of size 50mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube all as specified and directed. |
| 13 | S&F factory made solid panel pvc door shutter 30 mm thick (style) consisting of frame made out of M. S. tubes for top & bottom rails. M. S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M. S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, in the frame all as specified and directed. |
| 14 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge.Notes:-(a) Irrespective of whatever specified elsewhere in tender documents, the work shall be got executed through authorized executor of approved manufacturer’s only. The tri-party agreement between contractor, approved manufacturer and their authorized Applicator on Non Judicial Stamp paper of Rs 100/- (format of MoU is enclosed with Appx A to NIT. (b) Authorised Applicator shall have valid authorization letter from the manufacturers. (c) The MoU shall be submitted by bidders in cover-I (technical bid) along with other requisite documents as per NIT. |
| 15 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65x100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge.Notes:-(a) Irrespective of whatever specified elsewhere in tender documents, the work shall be got executed through authorized executor of approved manufacturer’s only. The tri-party agreement between contractor, approved manufacturer and their authorized Applicator on Non Judicial Stamp paper of Rs 100/- (format of MoU is enclosed with Appx A to NIT. (b) Authorised Applicator shall have valid authorization letter from the manufacturers. (c) The MoU shall be submitted by bidders in cover-I (technical bid) along with other requisite documents as per NIT. |
| 16 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm thickness comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. Notes:-(a) Irrespective of whatever specified elsewhere in tender documents, the work shall be got executed through authorized executor of approved manufacturer’s only. The tri-party agreement between contractor, approved manufacturer and their authorized Applicator on Non Judicial Stamp paper of Rs 100/- (format of MoU is enclosed with Appx A to NIT. (b) Authorised Applicator shall have valid authorization letter from the manufacturers. (c) The MoU shall be submitted by bidders in cover-I (technical bid) along with other requisite documents as per NIT. |
| 17 | S&F powder coated (min thickness of powder coating 50 micron) anodised aluminum window shutter three track sliding type, section having frame size bottom with outer 92x45.5x1.5mm (section code 20617) , top and side 92x31.75x1.5 (section code 20831) & aluminum section of shutter top and bottom size 40 x 18 x 1.5 ( section code 20736) , interlock size 40 x 18x 1.45 (section code 20737), side/ middle size 40 x18 x1.55, (section code 20738) including necessary,wiremesh , glass, joining cleats, glazing clips rubber backing, anodised aluminum snap beading screw, anodised aluminum fitting complete all as specified and directed by Engineer-In-Charge. NOTE- 1. Glazed shutter glass thickness not less than 5mm and SS wiremess shutter with ss wiremesh as approved by GE is also included. no payment will be made separately.2. No extra payment will be made for section profilesprovided of higher sizes. 3. No extra payment will be made for wiremesh and window glass. |
| 18 | S&F steel ventilator with top hung shutter including box type hinges, peg stay and glazing bars complete with dove tailed or welded, complete all as specified & directed. |
| 19 | M&L 18-19 mm thick plywood, grade 2 quality, interior grade, commercial type, fixed with screws to timber frame-work, complete all as specified and directed |
| 20 | M&L for 0.90mm thick decorative PVC laminates 'Mica type 1 of surface finished,colour and pattern as approved, fixed with adhesive as per manufacturer's instructions complete all as specified and directed. |
| 21 | M & L for 6mm thick external teak wood lipping for block board or veneered particle board , fixed with nails, complete all as specified and directed. |
| 22 | S&F continuous (piano) hinges, mild steel, bright finish or electro galvanized width of flaps 30mm (when open) fixed with CP steel screws, complete all as specified and directed. |
| 23 | S&F 40mm dia, cupboard knobs fixed with nut, screw & washer of mild steel, bright finished complete all as specified and directed. |
| 24 | S&F 100 mm long, fancy type, stainless steel handles SS 304 grade, complete all as specified and directed. |
| 25 | S&F magnet catcher heavy duty for cup board shutter complete all as specified and directed. |
| 26 | M&L 2nd class hard wood, wooden beading, plain fillets, square or rectangular or tringular in section clean sawn sectional area exc 3 sqcm but not exc 6 Sqcm fixed with nail complete, all as specified and directed. |
| 27 | S&F 100 mm size butt hinges, stainless steel,SS 304 heavy duty and fixed with stainless steel screws all as specified and directed. |
| 28 | S&F in repair butt hinges, 100 mm extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specified and directed. |
| 29 | S&F 150mm long aluminium handles cast type, anodised, complete all as specified and directed. |
| 30 | S&F in repair 150mm long aluminium handles cast type, anodised, complete all as specified and directed. |
| 31 | S&F, 200 mm long aluminum anodised barrel tower bolts of extruded section all as specified and directed. |
| 32 | S&F in repair 200 mm long aluminum anodised barrel tower bolts of extruded section all as specified and directed. |
| 33 | S&F aluminium alloy, anodized, sliding door bolt, 300mm long, with hasp, staple (bolt type) & fixing clips of sheet, cast or extruded section & fixing blots & sliding bolts of extruded section or cast aluminium alloy & fixed |
| 34 | S&F in repairs aluminium alloy, anodized, sliding door bolt, 300mm long, with hasp, staple (bolt type) & fixing clips of sheet, cast or extruded section & fixing blots & sliding bolts of extruded section or cast aluminium alloy & fixed |
| 35 | S&F 300mm long mild steel ordinary rat tail rod pattern springs, ISI marked including roller & roller plate, fixing by welding or screws as required complete all as specified & directed. |
| 36 | S&F in repairs 300mm long mild steel ordinary rat tail rod pattern springs, ISI marked including roller & roller plate complete all as specified & directed (Fixed as in Existing iron /wooden frame in own arrangement). |
| 37 | S&F, 125 mm size hasp and staple, safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed. |
| 38 | S&F in repair 125 mm size hasp and staple, safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed. |
| 39 | Hacking out old broken glass (any thickness, size, quality or description ) from wooden or stone, concrete or brick surrounds, glazed with putty or fixed with beads, complete all as specified and directed. |
| 40 | S&F of 3.00 mm thick sheet glass ordinary quality and glazing with oil putty in squares not exc 0.5 sqm in each pane complete all as specified and directed. |
| 41 | S&F of 4.00 mm thick figured glass, pin head type and glazing with oil putty in squares not exc 0.5 sqm in each pane, all as specified and directed. |
| 42 | S&F stainless steel wire cloth, 0.36mm nominal dia of wire & average width of aperture 1.40mm & fixed with alluminium wire staples, complete all as specified and directed. |
| 43 | S&F in repair stainless steel wire cloth, 0.36mm nominal dia of wire & average width of aperture 1.40mm & fixed with alluminium wire staples including taking down from any section and refixing with new wire mesh with tinned tack/by welding/bolting/beading in steel/wooden door/window/ ventilator and making good the disturbed portion during execution, complete all as specified and directed. |
| 44 | S&F 140mm long floor door stopper of aluminum alloy body & tongue, anodized, with hard drawn steel spring, fixed in floor complete all as specified and directed. |
| 45 | M&L for prepration of new wooden surfaces and applying two coats of synthetic enamel paint over a coat of pink primer on new wooden surfaces of any description over 10cm width or girth complete all as specified and directed. |
| 46 | M&L for preparation of newly steel surface and applying two coats of synthetic enamel paint over a coat of red oxide primer on surfaces of any description over 10 cm width or girth, not oterwise described, complete all as specified and directed. |
| 47 | Demolition of brick work built in cement mortar including all of quoins, arches, pillers etc.but excluding ashlar facings and precast concrete articles. |
| 48 | M & L for brick work using old size fly ash brick conforming to IS-12894:2002, Non Modular, class designation 7.5, straight or curved on plan, exc 6.0 m mean radius, built in CM (1:6) , complete, all as specified and directed. |
| 49 | Ditto all as per item No 47 above but except bricks. (old bricks retrived from demoltion shall be used) |
| 50 | Taking down cement plaster on brick or stone walls etc including ranking out joints, hacking for key, scrubbing down with water etc all as specified and directed. |
| 51 | M&L for 15mm thick rendering on fair faces of brick work or concrete surface in CM 1:4, finished surface even and fair with out using extra cement, complete all as specified and directed. |
| 52 | M&L rendering 10mm thick on fair faces of brick work in CM (1:6) surface finished even and smooth without using extra cement, complete all as specified and directed. |
| 53 | M&L rendering 5mm thick in CM 1:3 as in ceiling ,soffits of slab and finish the surface even and smooth without using extra cement complete all as specified and as directed. |
| 54 | Dismantling floor, hearth or wall tiling including cement mortar bedding but not backing,(except PCC flooring) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 55 | M&L for non skid ceramic coloured tiles 7 to 8 mm thick premium first quality (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc, laid over 15mm thick screed bed in CM 1:6, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. |
| 56 | M&L for glazed ceramic coloured tiles (joint free) premium first quality of size 300x600x 8mm to 10mm thick over 10mm thick plaster in CM 1:4 on vertical surfaces such as skirting, dados and risers to steps etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and drected. |
| 57 | M&L for non skid ceramic tiles (coloured) premium first quality 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm as in floors,skriting ,dadojoints free, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 15mm thick screed bed in cement & sand mortar 1:6 and dismantling of existing tiles, complete all as specified and as directed. |
| 58 | Demolition of cement Concrete in ground floors and pavings n'exe 15 cm thickness (below or above ground level) complete all as specified and directed. |
| 59 | M & L for 40mm thick cement concrete 1:2:4 type B-1using 20mm crushed stone graded aggregate as in floors, surface finished even & smooth using extra cement complete all as specified and directed. |
| 60 | M & L for 25mm thick cement concrete 1:2:4 type B-0 using 12.5mm crushed stone graded aggregate as in floors, surface finished even & smooth using extra cement complete all as specified and directed. |
| 61 | Cleaning and removing all scale and dirt etc from tank and from mouth of circulating pipe etc of capacity exc 250 n exc 500 ltrs complete all as specified and directed. |
| 62 | S&F 500 Ltr capacity rotational moulded polyethylene water storage tanks triple layered (cylindrical vertical with closed top) hoisted and fixed in position incl 20 mm dia float valves with epoxy coated aluminum rod & high density plastic ball and including dismantling of existing tank, complete all as specified and directed. |
| 63 | S&F, in repair 20mm dia float valve high pressure of PTMT with epoxy coated aluminum rod & high density plastic ball screwed for iron pipe with fly nuts complete all as specified and directed. |
| 64 | S&F in repair gunmetal globe or gate valve with iron wheel head, screwed both ends for iron pipe of 15 mm bore complete all as specified and directed. |
| 65 | S&F steel water GI tubing 15mm dia medium grade, with all fittings complete to walls and ceilings or laid in floors including taking down of existing GI/CPVC pipe including bend,jointer ,Tee and others accessories complete all as specified and directed. |
| 66 | S&F steel water GI tubing 20mm dia medium grade, with all fittings complete to walls and ceilings or laid in floors including taking down of existing GI/CPVC pipe including bend,jointer ,Tee and others accessories complete all as specified and directed. |
| 67 | S&F steel water GI tubing 25mm dia medium grade, with all fittings complete to walls and ceilings or laid in floors including taking down of existing GI/CPVC pipe including bend,jointer ,Tee and others accessories complete all as specified and directed. |
| 68 | Cutting chases pining in brick, concrete walls built in cement mortar or cement lime mortar making good to facings where required and pointing in cement mortor 1:3 to ends or edges of shelves lintels etc and cutting chases for concealed water tubing cutting not exc 10 cm girth all as spcefied and directed. |
| 69 | S&F in repair viterous china Wash Hand Basin white flat black type of size 550x400mm including cutting for and pinning in ends of brackets and fixing in walls including 32mm dia chromium plated waste fittings/coupling, PVC waste pipe MS brackets complete all as specified and directed. |
| 70 | S & F in repair CP pillar tap, cast copper alloy, with capstan heads, chromium plated, screwed down, high pressure fancy type with long shanks and fly nuts, screwed for iron pipe 15mm bore complete all as specified and directed. |
| 71 | S&F in repair of 15mm CP bib tap long body pattern with flange/cap cast copper alloy chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipes complete all as specified. |
| 72 | S & F in repair stop cock /angle cock cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipes 15mm bore complete all as specified and directed. |
| 73 | S&F in repair 15mm dia spindle for bib taps,angle valve and pillar taps as required as per sample given by Engr-in-Charge, complete all as specified and directed.(Including taking down existing spindle carefully and fixed the same in position) complete all as specified and directed. |
| 74 | S&F in repair stop valves, 15mm dia, cast copper alloy, CP fancy type with long shank and cup (concealed type) screwd down, high pressure with crutch or butter fly handle,screwed both ends for iron pipes or for unions complete all as specified and directed. |
| 75 | S&F, in repair, 10 Ltrs capacity, PVC valveless, syphonic action type, ISI Marked, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, complete all as specified and directed. |
| 76 | S&F in repair kitchen sink with drainage board made of stainless steel 1.00 mm thick with plug washer and waste including bedding in cement mortar including fixing cantilever bracket and connecting union to pipe overall size 915 X 460 mm bowl size 410 X 330 X 160 mm complete all as specified and directed. |
| 77 | S&F in repair stainless steel kitchen plate rack made of 0.80mm thick sheet of size 750x600x250mm and fixed to wall, complete, all as specified and directed. |
| 78 | S&F in repair viterous china wash down water closed pan (Pedestal pattern) with 'P' or 'S' trap white including connection to trap and cistern, flush pipe, PVC seat cover and making good disturbed surface of floor complete all as specified and directed. |
| 79 | S&F in repairs vitreous china squatting pan \\"Orissa\\" pattern size 580mmx440mm white with integral foot rests including connection to trap, and to flushing pipe, anti syphonage pipe, etc complete making good to floors and complete all as specified and as directed. |
| 80 | S&F in repair plastic water closet seat cover black/white, closed pattern with flat bottmom & cover and aluminum anodised hinging device complete all as specified and directed. |
| 81 | S&F, in repair 32 mm bore Low density PVC flexible pipe for Wash hand basin/sink etc complete all as specified and directed. |
| 82 | Supply and fixing 32mm bore Brass chromium plated bottle trap for wash basin with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed complete all as specified. |
| 83 | S&F in repair CP Shower rose with arms 15mm bore ans size 125 mm complete all as specified and directed. |
| 84 | S&F in repair PVC connections 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed. |
| 85 | S&F, in repair Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed 32mm bore, all as specified and directed. |
| 86 | S&F, in repair 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers all as specified and directed. |
| 87 | S&F in repair, PVC (SWR) floor trap, plain with grat-ing including joint-ing with solvent cement (Diameter of outlet 75mm) all as specified and directed. |
| 88 | S&F in repair, CP grating with or without waste pipe hole 100 mm dia, complete all as specified and directed. |
| 89 | S&F in repair sheet glass shelf assemble consisting of 5.5 thick sheet glass shelf 12cm wide with CP bracket gaurd & railing 60cm long all as specified and directed. |
| 90 | S&F, in repair brass chromium plated, tubular towel rail, 20mm dia, D type, 60cm long between flanges all as specified and directed. |
| 91 | S&F in repair 28 mm dia stainless steel curtain rod, superior quality (weight not less than 300gm/RM) with end brackets and end knobs and fixed to wall with wooden plug/ PVC gully with CP screws and cup washers complete all as specified and directed. |
| 92 | S&F in repairs 110 mm Bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls all as specified and directed. |
| 93 | S&F in repairs 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls all as specified and directed. |
| 94 | M&L for PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors of 110 mm bore of pipe etc complete all as specified and directed. |
| 95 | All as per above item 93 but 75 mm bore of pipe etc. |
| 96 | S&F 110 mm bore PVC (SWR) junction single, (Single T) equal or unequal complete |
| 97 | S&F 75 mm bore PVC (SWR) junction single, (Single T) equal or unequal complete |
| 98 | S&F in repair PVC(SWR) P trap 110mm, setting and jointing with solvent cement |
| 99 | S&F in repair PVC(SWR) Nahani trap 75mm, setting and jointing with solvent cement |
| 100 | S & F in repair PVC (SWR) bends any radius (110mm Bore) complete all as specified. |
| 101 | S & F in repair PVC (SWR) bends any radius (75 mm Bore) complete all as specified. |
| 102 | S & F in repair PVC (SWR) branch piece, Single (single y) equal or unequal (75 mm Bore) complete all as specified. |
| 103 | S&F of universal ductile iron/rubber flexible coupler suitable for joining CI PIPE of 100mm diameter to PVC of 110 diameter pipe of matching OD,EPDM Gasket,Mechanical locking band corrosion resistance finish conforming to PN/16-EN545 including cleaning & preparation of Old and New pipe ends and leak proof installation complete all as specified and directed as as per Engineer-in-charge. |
| 104 | S&F of universal ductile iron/rubber flexible coupler suitable for joining CI PIPE of 100mm diameter to PVC of 75mm diameter pipe of matching OD,EPDM Gasket,Mechanical locking band corrosion resistance finish conforming to PN/16-EN545 including cleaning & preparation of Old and New pipe ends and leak proof installation complete all as specified and directed as as per Engineer-in-charge. |
| 105 | S&F, in repair, 15mm dia two way bib taps, cast copper alloy chromium plated fancy type handle screwed down, screwed for iron pipe or for brass ferrule all as specified and directed. |
| 106 | S&F in repair CP brass health faucet not exc 1.25 m long flexible tube including wall hook complete all as specified and directed . |
| 107 | Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and directed. |
| 108 | S&F in repair 'E' board 600x600x4mm thick white prelaminated sett embosed reinforced designer ceiling board tiles of approved texture at all height laid on hot dipped galvanised iron imposed grid with 24mm wide T-section exposed flanges which shall be poweder coated white. The frame work shall comprise of main runner made from 0.33 mm thick GS sheet and of size 24x32x300mm abd soaced at 1200mm centers securely fixed to be structural soffts by approved hangers at 1200 mm maximum centrers. Hangers of GI wire 4mm dia to be fixed by approved rawl plug level and justers and screws etc. The last hanger at the end of each main runner shall not be grater than 450mm from adjacent wall, Flush fitting of 1200mm long cross tee (with double stiching) to be interlocked between main runners at 600mm center to from 1200x600mm modules cross tee longer than 600mm to be supported independtly. 600x600mm dodules to be formed by fitting 600mm long cross tee centrally between the 1200mm cross tee. Tee, perimeter wall angle shall be of 0.45mm thick GS sheet of size 19x19mm and 300mm long of white colour all as per manufacture insturction. |
| 109 | Repair to leakage/sepage from toilets and bathroom by taking down and refixing of joints of CI/GI pipes with solvent/ M- seal of including taking down and refixing existing false ceiling and making good the disturbed surface complete all as specified and directed. |
| 110 | S&F in repair vitreous china wash down water closet pan pedestal pattern, including P or S trap and connection to drain (or outgoing pipe) and pvc seat cover excluding flushing cistern and flush pipe complete all as specified and directed |
| 111 | S&F in repair 20mm outer dia 3-layer PP-R poly propylene random copolymer concealed pipes SDR 7.4 (PN-16) UV stabilized and antimicrobial fusion welded having thermal stability for hot and cold water supply including all PP-R plain and brass threaded polypropylene random fittings fixed complete to wall,ceilings or in floors all as specified and directed . |
| 112 | S&F in repairs 3-layer PP-R poly propylene random copolymer, brass threaded 12x16 mm adapter incl taking down and refixing of taps/valves etc and making good the dismantled surface with white cement complete all as specified and as directed. |
| 113 | S&F in repairs 3-layer PP-R poly propylene random copolymer, brass threaded 12x16 mm elbow incl taking down and refixing of taps/valves etc and making good the dismantled surface with white cement complete all as specified and as directed. |
| 114 | S&F in repairs 3-layer PP-R poly propylene random copolymer, brass threaded 12x16 mm TEE incl taking down and refixing of taps/valves etc and making good the dismantled surface with white cement complete all as specified and as directed. |
| 115 | S&F in repairs 3-layer PP-R poly propylene random copolymer, brass threaded 12-16x20-25x25-32 mm tank TEE complete all as specified and as directed. Please Enable Macros to View BoQ information |
| 116 | S&F in repairs 3-layer PP-R poly propylene random copolymer, brass threaded 12-16x20-25x25-32 mm tank TEE complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 17, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 07, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysOct 10, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 21 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender