Tender For Special Repairs Of Toilets Nos T/S/18 And T/S/19 At Gr R And R Centre(Tenga) And Md Accn P/N/1 And P/J//7 At Chindit Top Of Age B/R And Age E/M Under Ge Tenga
Tender Value
34.50 Lakhs
Estimated cost
Bid Submission
08 Oct 2026
17 days left
EMD
69000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
kameng → Arunachal Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repairs Of Toilets Nos T/S/18 And T/S/19 At Gr R And R Centre(Tenga) And Md Accn P/N/1 And P/J//7 At Chindit Top Of Age B/R And Age E/M Under Ge Tenga
BOQ
| Sl. No. | Item Description |
| 1 | Dismanteling of plain or corrugated MS sheet any gauge, thickness including nainital or similar pattern as in roof covering complete all as specified and directed. |
| 2 | S&F for 0.63mm Galvanised,corrugated mild steel sheeting with two corrugations side lap, fixed with L-type or J-type or cranked hook bolts in lieu of screws and washers, in roofs, walls etc. with grade of zinc coating 275. |
| 3 | S&F for 0.63mm Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 all as specified and directed. |
| 4 | Dismantling structural steel work including doors, gates but excluding framed truss etc.complete all as specified and directed. |
| 5 | S & F in mild steel work conforming to Fe 290 Gde-E-165 in posts, wall & struts angle including cutting top to shape as directed, drilling holes, notching for wire, etc; flat iron fillets ( for securing wire mesh etc) including all necessary drilling, bolting or riveting etc complete all as specified & directed. |
| 6 | M&L for preparation of new steel surfaces / MS sheet of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified and directed. |
| 7 | M&L for preparation of old steel surfaces / MS sheet of any description over 10 cm width or girth and applying two coats of synthetic enameled paint complete all as specified and directed. |
| 8 | Demolition of brick work, built in cement mortar or cement lime mortar including all quions, arches, pillars, etc including demolition of precast rcc articles and disposal of debris out of MoD land complete all as specified and directed. |
| 9 | M&L for Providing precast cement concrete solid building blocks exc 10cm in width of type C1 (1:3:6) (20mm graded stone aggregates) and setting in cement mortar 1:6,complete, in walls, complete all as specified and directed. |
| 10 | Taking down cement plaster on brick walls or stone walls any descrition etc including raking out joints, hacking for key, scrubbing down with water etc all as specified and directed. |
| 11 | M&L for rendering 15mm thick cement plaster on fair faces of brick work or concrete surfaces in cement mortar (1:4) in two layers (5mm finishing layer over 10mm base layer) finished even and smooth without using extra cement complete all as specified and directed |
| 12 | M&L for Preparation of new plastered or unplastered surfaces of wall and applying two coats of cement base paint over a coat of alkali resistance primer complete all as specified and directed. |
| 13 | M&L for Preparation of old plastered or unplastered surfaces of wall and applying two coats of cement base paint after complete removal of existing removal complete all as specified and directed. |
| 14 | M&L Preparation of new plastered surface of wall by applying 2mm thick wall care putty and making the surface smooth and two coats of distemper oil emulsion over a coat of primer of new surfaces complete all as specified and directed |
| 15 | M&L Preparation of old surface complete removal of existing treatment and making the surface smooth and two coats of Oil bound distemper on old surface of wall surface complete all as spd and directed.(old portion) |
| 16 | Roughening surfaces of old concrete floor by picking,sweeping clean and washing down with water to remove dust etc and brusing neat cement slurry with 3.00 kg per sqm all as spd & directed. |
| 17 | M&L Cement concrete type C-1, 1:3:6 (using 40mm graded aggregate) as in plinth protection and paving 75mm thick laid in slope finished even and fair without using extra cement incl making joints at every 2.5 m and at corner filled with bitumen 85/25 grade and sand in ratio 1:2 by weight and complete all as specified |
| 18 | Demolition of cement concrete (un-reinforced) in ground floors and pavings n. exc. 15cm thickness (below or above ground level) all as directed. |
| 19 | M&L for 75 mm thk PCC 1:4:8 type D-2 as in subbase to flooring complete all as specified and as diretcted. |
| 20 | M&L for chequered cement concrete tile 20cm x 20cmx 25mm/30cmX30cmX 20 to 25mm thick set jointed and pointed in neat cement slurry in floor with grey cement and pig ments over 20mm thick screed bed or bedding layer of CM (1:6) complete all as specified and as directed. |
| 21 | Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing) removing serviceable tiles to store and rubbish off the premises and removing the debris outside from defence land complete all as specified and directed . |
| 22 | S&F for non skid coloured Ceramic tiles 07mm to 08mm thick (square/ rectangular) area of each tiles exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:4 complete all as specified and directed. |
| 23 | M&L for coloured Glazed ceramic tiles 450mmX 350mmX 7mm thick in vertical surface of wall set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of the tiles over and including 10mm thick rough cement plaster to receive tiles in CM 1:4 complete all as specified and as directed. |
| 24 | Taking down chowkhats or frames n.exc 1.50 sqm with shutters (without taking off shutters from the frames) all as specified and as directed. |
| 25 | Taking down chowkhats of frames exc 1.50 sqm but n. exc 4.0 sqm with shutters (without taking off shutters from the frames) all as spd. |
| 26 | S & F 2nd class hard wood plain solid straight chowkats and frame of wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and directed. |
| 27 | M&L for Cutting holes in brick wall for inserting holdfast and making good dismantled portion by filling PCC (1:2:4) type B-1 exc. half brick but n.exc one brick incl existing surface finishes complete all as specified and as directed. |
| 28 | S&F for mild steel work, Grade Fe-410-0 or Fe- 310-0, as in flat iron (for holdfast) complete all as specified and as directed. |
| 29 | S&F for 35mm thick, 2nd class hard wood plain framed, panelled (factory made) shutters (two panel only) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces, The size of rail and stile as per IS-1003 (Part-I) (Larger size to be provided) kiln seasoned and chemically pressure treated fitted to chowkats all as specified and directed |
| 30 | S & F for glazed and Skelton shutters 30mm thick of 2nd class hardwood,open rebated and prepared to receive glass, guaze etc (Without Sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc;sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); suppplied and fitted to chowkats. |
| 31 | Supply and fix Solid PVC Door Frame of size 50mm x 47mm made out of 5mm wood grain printed PVC sheet & edges will be painted to match with printed sheet ,reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed. |
| 32 | Supply and fix for factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded wood grain printed PVC sheet PVC ‘C’ channel having a plain colour PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and wood grain printed PVC sheet for top rail,lock rail & bottom rail on either side & as gap insert for top rail & bottom rail;Panelling of wood grain printed PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable & 5mm thick x15mm wide PVC sheet beading used inside stiles and rails and decorative PVC beading of 10mm x 10mm (90 degree ) used instead of exposed portion of PVC sheet beading suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed. |
| 33 | M & L for preparation of new wood or wood based surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer. |
| 34 | M&L 3 mm thick Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane |
| 35 | S&F for mild steel butt hinges of size 100mm long for fixing of pvc door shutter etc complete all as specified and directed. |
| 36 | S&F for aluminium handles, cast type, anodised Size of handle in 100mm complete all as specified and directed. |
| 37 | S&F for aluminium handles, cast type, anodised Size of handle in 150mm complete all as specified and directed. |
| 38 | S&F for aluminium anodized barrel tower bolts 150 mm of extruded section and fixed complete all as specified and directed. |
| 39 | Taking up or down steel water tubing and connections including cleaning for refixing or removal to store for bore of pipe 15mm bore dia all as specified and directed. |
| 40 | Taking up or down steel water tubing and connections including cleaning for refixing or removal to store for bore of pipe 20mm bore dia all as specified and directed. |
| 41 | S&F for 20mm bore Steel water tubing 'medium grade', galvanised with all fittings like elbow, tee, socket, bend etc and fixed to wall, ceiling or laid in floor complete all as specified and directed. |
| 42 | S&F for 15mm bore Steel water tubing 'medium grade', galvanised with all fittings like elbow, tee, socket, bend etc and fixed to wall, ceiling or laid in floor complete all as specified and directed. |
| 43 | S & F in repair 15 mm bore long body CP Bib taps cast copper alloy fancy type with capstan heads (chromium plated),and cup screwed down , high pressure for iron pipe mpete all as spd & directed. |
| 44 | S&F in repair 15 mm bore Stop valves, fancy type, chromium plated cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed. |
| 45 | S&F in repairs Self-closing CP Pillar taps (push type) 15 mm bore, cast copper alloy, with capstan heads screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks & fly-nuts, screwed for iron pipe complete all as specified and directed. |
| 46 | S&F in 5mm thick looking mirror of size 600x450mm of selected quality glass mounted on 6mm thick AC building board or commercial plywood and aluminium angle beading around mirrior fixed on wall PVC plug and screws etc complete all as specified and directed |
| 47 | S&F in repair 15mm dia 600 mm long PVC connection including brass check nut at both ends screwed both end for iron pipes. |
| 48 | S & F in repair 32/40 mm bore PVC waste pipe flexible with minimum length 800mm complete all as specified and directed. |
| 49 | S & F in repairs 75mm PVC floor trap, ISI marked with CP grating with/without waste pipe hole incl jointing to waste pipe fixed with solvent cement complete all as specified and as directed. |
| 50 | S & F in repairs 110mm PVC floor trap, ISI marked with CP grating with/without waste pipe hole incl jointing to waste pipe fixed with solvent cement complete all as specified and as directed. |
| 51 | Demolition and breaking up drain pipes (Salt glazed ware, PVC/AC or Reinforced concrete) set in cement mortar,and taking out of trenches, if required, Internal dia of pipe in 75MM/100mm |
| 52 | Supplied and fixed PVC (SWR) pipes 75mm bore single socketed, in any length with rubber ring joints laid in trenches or in floors all as specified and directed. |
| 53 | Supplied and fixed PVC (SWR) pipes 110mm bore single socketed, in any length with rubber ring joints laid in trenches or in floors all as specified and directed. |
| 54 | Supplied and fixed PVC (SWR) pipes 75mm bore single socketed in any length with rubber ring joints fixed to walls all as specified and directed. |
| 55 | Supplied and fixed PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints fixed to walls all as specified and directed.(ISI MARKED) |
| 56 | Supplied and fixed PVC (SWR) bends any radius 75mm dia all as specified and directed.(ISI MARKED) |
| 57 | Supplied and fixed PVC (SWR) bends any radius 110mm dia all as specified and directed.(ISI MARKED) |
| 58 | Supplied and fixed PVC (SWR) junction single,(Single T) equal or unequal any radius 75mm dia all as specified and directed.(ISI MARKED) |
| 59 | S&F for 10 ltrs capacity PVC valveless, syphonic action type,Dual push flush button flushing cistern, low level, white, with intel, ball valve, float and handle including brackets ,flush pipe of polyethylene of low or high density or PVC 32 mm dia complete all as specfied and as directed. |
| 60 | S&F in repair vitreous China squatting pan, `Orrisa' pattern, size 580 x440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap,and to flushing pipe, anti-syphonage pipe,etc. complete including making good to floor complete all as specified and as directed. |
| 61 | S&F in repair vitreous China wash basin, white, flat back, size 550x400mm excluding taps etc but including brackets,including cutting for and pinning in ends of brackets or erecting stand but including waste coupling min weight (32mm-45gms/40mm-60gms)of fixing of supply and waste pipe complete all as specfied and as directed. |
| 62 | M&L for powder coated anodised aluminium frame for doors, windows, ventilatores with one or more rebated including joining cleat for fixing etc complete all as specified and directed. |
| 63 | S & F Anodised aluminium window and ventilator shutters, fixed type without sash bars aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips,rubber packing,anodised aluminium snap beading,screws etc and power coating of any colour(thickness of powder coating not less than 50 micron.) complete all as specified and directed. |
| 64 | M & L for 4.80 mm Sheet glass, ordinary quality and glazing with aluminium clip and beading in square exc 0.5 sq. m in each pane all as specified and directed. |
| 65 | S & F Galvanised steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18mm etc all as specified all as specified and directed. |
| 66 | S & F Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineerin-charge. |
| 67 | Demolition of Reinforced Cement Concrete of any description and in any position not otherwise specifically provided for all as specified and directed. |
| 68 | M&L for mild steel TMT bars 10 mm dia., and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips all as specified and directed. |
| 69 | M&L for mild steel TMT bars 8 mm dia., and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips all as specified and directed. |
| 70 | Use&Waste of form work to chullah hoods,chajjas,troughs and similar items including edges with fair finish flat surfaces all as specified and directed. |
| 71 | Use&Waste of Formwork to edges of concrete flats, treads, breaks in floors,window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 05cm but n exc 10cm wide with fair finish flat surfaces all as specified and directed. |
| 72 | M&L for reinforced cement concrete ratio(1:1.5:3) (using 20 mm graded stone aggregate) for slabs supported on walls , beams and columns, in floors ,hold fast, roofs, landings and in shelves ,chhajja's and the like complete with all necessary formwork etc all as specified and as directed. |
| 73 | Demolition of precast cement concrete articles and precast concrete block walling built in cement mortar all as specified and directed. |
| 74 | M&L for precast cement concrete 1:3:6 type C1 using 20 mm graded aggregate block solid building blocks or slabs not exc 10cm thick (with plain or interlocking joints as directed ) complete set in CM 1:4 all as specified and directed. |
| 75 | M&L for Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified and directed. |
| 76 | Dismantling wrought iron or mild steel work of any description not otherwise provided for all as specified and directed. |
| 77 | Material & Labour for Rolled sections as in framing for cladding, glazing and the like fixed with angle cleats and connecting plates, etc. (Fe-410-W, Gde-E-250) quality B all as specified and directed. |
| 78 | Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes,channels, plates etc., including welding, grinding,buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, includingn fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement all as specified and directed. |
| 79 | Material & Labour for light Point wiring with 1.5 sq mm (nominal area), PVC insulated unsheathed (FRLSH), 1100 volts grade, multi-stranded copper conductor, in and including PVC casing capping of adequate size with all fittings and accessories including PVC boxes for housing the switches, including PVC insulated and unsheathed (FRLSH)single core multi-stranded copper conductor cable of size 1.5 sq mm green in colour as earth continuity conductor connected to common earth dolly complete all as specified and directed. |
| 80 | As per item No. 79 but one light point controlled by two two-way switch 5/6 Amp complete all as specified and as directed . |
| 81 | As per item No. 79 but one bell/buzzer point controlled by one bell push on the same board with other switches complete all as specified and as directed . |
| 82 | All as per item No. 79 here in before but One 3 pin socket outlet, 5 Amps on the same board with other switches, with cables 1.5sq. mm size all as specified and as directed . |
| 83 | All as per item No. 79 here in before but for one 3 pin socket outlet 5 Amps three pin controlled by one switch on independent board complete all as specified directed. |
| 84 | All as per item No. 79 here in before but for one 5 pin socket outlet 15 Amp and 5 Amp Multipurpose independent using 2.5 Sqmm copper conductor cable (multi-strand) PVC insulated and unsheathed cable and 2.5 sqmm copper (multistrand) PVC insulated and unsheathed earth wire with PVC boxes complete all as specified and directed . |
| 85 | M&L for Point wiring for one socket outlet 15 Amp on independent board with 4 sq mm (nominal area), PVC insulated unsheathed (FRLSH), 1100 volts grade, multi-stranded copper conductor, in and including PVC casing capping of adequate size with all fittings and accessories including PVC boxes for housing the switches ( Make of box Prestoplast,Prestoteak), including PVC insulated and unsheathed (FRLSH)single core multi-stranded copper conductor cable of size 4 sq mm green in colour as earth continuity conductor connected to common earth dolly complete all as specified and directed. `(For Geyser ) |
| 86 | S&F Socket outlet 2 in 1, 3 pin, 5 amp flush type all as specified and as directed . |
| 87 | S&F Socket outlet 2 in 1, 3 pin, 5 and 15 amp flush type all as specified and as directed . |
| 88 | Supply & fixing switch piano flush type (ISI marked), single pole, one way 15 Amp, 240 Volts complete all as specified & directed. |
| 89 | Supply and fixing ceiling rose, surface bakelite, 65mm x 50mm , two to three terminals complete all as specified & directed. |
| 90 | Supply & fixing switch piano flush type (ISI marked), single pole, one way 5 Amp, 240 Volts complete all as specified & directed. |
| 91 | S&F switch piano two way, 5/6 Amp, flush type (ISI marked), single pole, complete all as specified & directed. |
| 92 | S&F bell/buzzer push 5/6 Amp,flush type complete all as specified & as directed. |
| 93 | S&F call bell ding dong electric AC, 240 volt, 50 HZ, surface type complete all as specified & as directed. |
| 94 | Supply and fixing lamp holder, insuleted body with back plate suitable batten fitting on wall duly grouted/fixed in solid block wall or on wooden board complete all as specified and directed. |
| 95 | S&F LED lamp 10 Watt, CDL, B-22 cap, (Pin type), 230W, PF not less tha 0.85 (min). |
| 96 | Supply and fixing LED light fitting 1 x 20 Watt 220 volt AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of size from ceiling rose completeall as specified and as directed . |
| 97 | S&F of new generation energy saving and environmental friendly long life LED building security light made up of innovative die cast aluminium housing high power LED as lighting source with IP - 66 power consumption 35 watt complete input voltage of 150-240 Volt (nominal rated voltage 240 Volt) complete including GI brackets with fixing arrangements & connected items, twisted 3 core copper cable of size 1.5 Sqmm dia for connecting phase, neutral and earth from ceiling rose to light length as required at site all as specified and directed. |
| 98 | S&F LED bulkhead fitting 10 watt (Endura Ruby) with all accessories and including connenting up with twin core twisted with flexible copper conductor cable with suitable size of 230 volts , 50 hz complete all as specified and as directed . |
| 99 | S & F MCCB DB's VTPN type double door in wall / nitch when MCBB's ,to be used Four pole and neutral, 8 way,415 Volt with rated Bus bar ,Suitable for Flush Mounting and Surface Mounting with 160 Amps Copper Bus bar for each phase and 2 Neutral bar, 2 Earth bar, and Cable ties for cable managent,Fully insulated busbar and shrouded Neutral bar ,improved Pan assembly for ease of installation ,Prefitted masking sheet, Reversible Door for IP 43 &IP 54 DB's with provision for DPX3 160 MCCB as incomer, and TPN /SPN/DP/SP out going . complete all as specified and directed. IP :54 Protection |
| 100 | S&F MCCB 4 Pole, 415 V, Adjustable type, 160 Amps with breaking capacity 36 KA all as specified and as directed . |
| 101 | Supply and fix sheet metal enclosures for DBs when MCBs to be used 230 volts 8 way 200 Amp rated busbar single pole double door and neutral fixed on wall duly grouted in solid block wall or on wooden board. |
| 102 | S&F MCB SPN having braking capacity 10KA, 32 Amps, 240 V complete all as specified and directed. |
| 103 | S&F MCB SP having braking capacity 10KA, 6 to 32 Amps, 240 V complete all as specified and directed. |
| 104 | S & F exhaust fan sweep 300 mm voltage 230 V 50 Hz 1200 RPM noiseless steel body light-weight rust proof body self closing louvers and blades complete all as specified and as directed. |
| 105 | Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300mm complete all as specified and as directed. |
| 106 | Supply and fix electric water heater(Geyser), storage type steel body with copper inner tank and heating element up to 2 KW capacity 25 litre, BEE 5 star rated adjustable temprature setting 0-90 degree C complete with accessories such as safety wall, thermostate, NRV indication lamps, inlet outlet connections,air vent connections, connection pieces including all fixing arrangements such as fastners, bilts, nuts washers etc including making good disturbed wall surfaces matching with the existing surface and finishing complete all as specified and directed by Engr in charge |
| 107 | Material & labour for earthing complete with galvanised steel earth plate electrode 600x600x6 mm thick buried directly in ground (earth pit not less than 2.25m deep below the ground level) with top edge of the plate not less than 1.5mtr below the normal ground level connected to galvanised wire 4mm dia by means of bolts, nuts, check nuts and washers of galvanised iron.Earth wire protected by GI pipe 15 mm bore(medium grade) and connected to main switch board or main control board as directed and as specified and shown in electrical plate No. 3 of SSR Part I (2009) including necessary concrete pit in PCC (1:3:6) type C1, pre-cast RCC (1:2:4) type B1 cover slab 40 cm x 40cm x 5cm reinforced with 8mm dia TMT bars @ 15cm C/C with one handle for lifting made out of 8mm dia bar, funnel, wire mesh, 20mm dia GI pipe medium grade for watering, charcoal or coke and salt in alternate layers including necessary excavation and earth work in any type of soil and testing complete all as directed by Engineer-in-Charge. |
| 108 | S&F wire for circuit/sub main wiring with 1100 volts grade double core PVC insulated and unsheathed cable with multistranded copper conductor 6 Sqmm, on surface or recessed or drawn in PVC casing capping along with 4 Sqmm single core copper conductor multi stranded cable as earth continuity conductor complete all as specified and as directed.(Note: One RM PVC casing capping/PVC conduit ,one run of 4 sqmm earth wire and 2 Run of 6 sqmm cable shall be measured as one run.) |
| 109 | S&F in replacement of 2 mm thick MS meter box rectangle type wall mounted including Provision of space for 04 Nos single phase meters, 01 x MCCB 100 Amp as main incoming, 04 Nos aluminum bus bar 150 Amp capacity, and necessary connection complete all as specified and as directed . |
| 110 | Supplying, laying, jointing & testing cable XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) with stranded aluminum conductor, 1100 volts grade, of size 25 sqmm 4 core as per IS 7098 Pt-II laid in trenches / ducts / encased in GI pipe / fixed to pole complete all as directed and specified. |
| 111 | Excavation in trenches in any type of soil not exc 1.5 mtrs wide and not exc 1.5 mtr in depth for laying of pipe/ cables/ poles etc and getting out |
| 112 | Returning filling in any type of soil including spreading leveling watering and well ramming in layers n.exc 25 cm complete all as specified and as directed. |
| 113 | Removing excavated soils to a distance n.exc. 50 mtr and depositing where directed at a level not exc 1.5 m above the starting point complete all as specified and as directed. |
| 114 | M & L for laying of fine, clean sand (river sand) free from sharp materials and stone particals in trenches for cushioning of cable 8 cm thick under cable and 15 cm thick over the cable including gently punning complete all as specified and directed. Note:- The total thickness of sand shall be measured 18 cm after punning. |
| 115 | Supply and laying un-reinforced precast.concrete cable protection cover of class LV, type-1, flat size 250mm x 150mm x 40 mm, factory made of specified make , complete all as specified and directed. |
| 116 | Supply and laying galvanised steel tube light grade ISI marked of size 40 mm dia incl all fittings in trenches/fixed on pole/wall/floor or laid in position complete all as specified and directed. |
| 117 | S & F galvanised steel tube medium grade supplied and laid complete including fittings 25 mm dia all as specified and directed. |
| 118 | S & F galvanised steel tube medium grade, supplied and laid complete including fittings 20 mm dia all as specified and directed. |
| 119 | Supply and fix stop valve/gate valve cast copper alloy, screwed down, high pressure with crutch or butterfly haldle, screwed bothends for 25 mm dia iron pipe complete all as specified and directed. |
| 120 | Supply and fix stop valve/gate valve cast copper alloy, screwed down, high pressure with crutch or butterfly haldle, screwed bothends for 20 mm dia iron pipe complete all as specified and directed. |
| 121 | Taking down point wiring carefully copper/ aluminum (light,fan, socket or power) complete (fittings such as switches ceiling rose, pendents, regulators, sockets etc) all as specified and directed. |
| 122 | Taking down main switches, DBs alongwith existing board and removing the same from the site and making good the disturb surfaces / Portion of the wall etc all specified and directed by EIC. |
| 123 | Taking down sub main wiring of any type and size and discription incl removal from DBs etc and removal of the same from site and making good the disturb surfaces or portion of wall/ceiling etc complete all as specified and directed by EIC. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 17, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 08, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 17 daysOct 15, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 24 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender