Tender For Repair Maintenance Of All Type Of Trade Pattern Furniture, Repair, Re-Canning, Polishing Of Various Wooden Furniture And Upholstering Of Chair Dining Officers, Chair Writing Officers, Chair Computer And Sofa Sets Under Bso Ge (I) (Cg) Goa
Tender Value
9.90 Lakhs
Estimated cost
Bid Submission
08 Oct 2026
13 days left
EMD
19800
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
goa → Goa
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair Maintenance Of All Type Of Trade Pattern Furniture, Repair, Re-Canning, Polishing Of Various Wooden Furniture And Upholstering Of Chair Dining Officers, Chair Writing Officers, Chair Computer And Sofa Sets Under Bso Ge (I) (Cg) Goa
BOQ
| Sl. No. | Item Description |
| 1 | REPAIRS TO HAT STAND WITH MIRROR FD-361 |
| 2 | Removing existing unserviceable veneer ply from hat stand and supply and fix new veneer ply of teak shade of size 1000x700mm of BWP grade complete all as specified and as directed. |
| 3 | Removing existing unserviceable mirror and supply and fix new mirror of size 440x300mm conforming to IS 2553 (Part 1) 2018 complete all as specified and as directed. |
| 4 | Removing existing unserviceable pegs and supply and fix new pegs made of brass for hanging hat complete all as specified and as directed. |
| 5 | Removing existing unserviceable beading and supply and fix new beading all around the Hat as shown in drawing complete all as specified and as directed. |
| 6 | Material and labour for smoothening surfaces with sand paper of hat stand and polishing the old polished surface with two coats of French polish complete all as specified and directed. |
| 7 | REPAIR TO PEG TABLE (FD-384) |
| 8 | Removing the existing unserviceable peg table top and supply and fix new top made out of 18 mm thick pre laminated MDF board Exterior Grade I & type II (PLMDF-12 designation) conforming to 14587:1998 (Re-affirmed 2003) the colour of the Prelaminated MDF board shall be of shade BEIGE/Chocolate/Mehogany/Wall nut chest shade with edges covered with Teak wood beading including French polishing to wooden surface to match the existing surfaces of repaired peg table apply one coat French polish on new surfaces and one coat on old surfaces to match uniform shade complete all as specified and as directed. |
| 9 | REPAIRS TO SOFA SET 1/3/4/5 SEATER SEAT (FD-281) |
| 10 | Replacement of existing foam cushion of sofa including existing tapestry cloth of sofa set 4/5 seater and supply and fix new PU moulded foam of density 50-55 kg per cubic meter of size 560 x 535 x 100 mm thick duly stitched with tapestry cloth and closed with Velcro of suitable size complete all as specified and as directed. Note: The cost of tapestry cloth shall not be less than Rs.350.00 Per RM. |
| 11 | Replacement of cover of tapestry cloth of cushion of sofa and supply and fix new cover of tapestry cloth on existing foam cushion with velcro on one edge of best quality. The cost of tapestry cloth shall not be less than Rs 350/- per meter. Shade and texture to be Jute pattern and colour to be got approved before bulk stitching complete all as specified and as directed. |
| 12 | Removing existing unserviceable long rail of seat or back side of three seater sofa set and supply and fix new long rail made out of first class hard wood teak of size 1590x100x35mm duly French polished complete all as specified and as directed. |
| 13 | Removing existing unserviceable short rail of any side of sofa set 4/5 seater and supply and fix new short rail made out of first class hard wood teak of size 525x100x35mm duly French polished complete all as specified and as directed. |
| 14 | Removing existing unserviceable wooden bearer of any side of sofa set 4/5 seater and supply and fix new wooden bearer made out of first class hard wood teak of size 525x40x40mm duly French polished complete all as specified and as directed. |
| 15 | Removing existing unserviceable wooden arm of any side of sofa set 4/5 seater and supply and fix new wooden arm made out of first class hard wood teak of size 525x40x40mm duly French polished complete all as specified and as directed |
| 16 | Material and labour for smoothening surface with sand paper of sofa set five seater for repolishing the old polished surface or unpolished surface including bottom of sofa with one coat of French polish both above and below the sofa complete all as specified and as directed. |
| 17 | Material and labour for smoothening surface with sand paper of Sofa set four seater for repolishing the old polished surface including bottom with one coat of French polish complete all as specified and as directed. |
| 18 | REPAIR TO TABLE CENTRE (FD-274) |
| 19 | Removing the existing unserviceable table centre top and supply and fix new top of size 900 x 450mm made out of 18 mm thick pre laminated MDF board Exterior Grade I and type II (PLMDF-12 designation) conforming to 14587:1998 (Re-affirmed 2003) the colour of the Prelaminated MDF board shall be of shade BEIGE/Chocolate/Mehogany/Wall nut chest shade with edges covered with teak wood beading including French polishing to wooden surface to match the existing surfaces of repaired table centre apply one coat French polish on new surfaces and one coat on old surfaces to match uniform shade complete all as specified and as directed. |
| 20 | REPAIR TO TABLE 900x600x760 MM WITH DRAWER (FD-283) |
| 21 | Removal of existing unserviceable leg and supply and fix new leg made of 1st class hard wood teak for table of size complete all as specified and as directed. |
| 22 | Removal of existing unserviceable top long rail and supply and fix new front top long rail made out of 1st class hard wood teak for table of size complete all as specified and as directed. |
| 23 | Removal of existing unserviceable top short rail and supply and fix new front top short rail made out of 1st class hard wood teak for table of size complete all as specified and as directed. |
| 24 | Removal of existing unserviceable long stiffener under the top and supply and fix new long stiffener made out of 1st class hard wood teak for table of size complete all as specified and as directed. |
| 25 | Removal of existing unserviceable short stiffener and supply and fix new short stiffener made out of 1st class hard wood for table size complete all as specified and as directed. |
| 26 | Removal of existing unserviceable drawer and supply and fix new drawer at the bottom of drawer with aluminium anodised knob of approved quality and one set of powder coated telescopic channels to move the drawers complete all as specified and as directed. |
| 27 | Removal of existing unserviceable top and supply and fix new top made out of18 mm thick pre laminated MDF board exterior grade I and type II (PLMDF-12 designation) conforming to 14587:1998 (Re-affirmed 2003)the colour of the Prelaminated MDF board shall be of shade BEIGE/Chocolate/Mehogany/Wall nut chest shade. Edges of the MDF board to be fixed with teak wood beading all around with matching colour complete all as specified and as directed. |
| 28 | Material and labour for French polishing of complete table exposed to view except laminated portion complete all as specified and as directed. |
| 29 | REPAIR TO BOOK CASE (FD-237) |
| 30 | Removing the existing unserviceable/ broken shutter and broken sides of book case and supply and fix new shutter and sides size as per drg made of 18 mm thick pre laminated MDF board Exterior Grade I & type II (PLMDF-12 designation) conforming to 14587:1998 (Re-affirmed 2003) the colour of the prelaminated MDF board shall be of shade BEIGE/Chocolate/Mehogany/Wall nut chest/Naina teak fixed with 40 mm wide chromium plated continuous piano hinges including CP handle 100 mm long 01 Nos knob and magnetic catcher to stick the doors. Edges of the shutters to be covered with teak wood beading complete all as specified and as directed. NOTE: Each leaf to be measured separately. |
| 31 | Removing the existing unserviceable broken back ply of book case and supply and fixing new 6 mm thick BWP grade plywood conforming to IS: 710 complete all as specified and as directed. |
| 32 | Preparation of surface and French polishing to book case complete all as specified and as directed. |
| 33 | REPAIR TO BIN LINEN MULTI PURPOSE (FD/E6/MAP/09) |
| 34 | Removing the existing unserviceable/ broken shutter and all sides of bin linen multipurpose supply and fix new shutter and all sides made of 18 mm thick pre laminated MDF board Exterior Grade I and type II (PLMDF-12 designation) conforming to 14587:1998 (Re-affirmed 2003)the colour of the prelaminated MDF board shall be of shade BEIGE/Chocolate/Mehogany/Wall nut chest/Naina teak fixed with 40 mm wide chromium plated continuous piano hinges including CP handle 100 mm long 01 Nos knob and magnetic catcher to stick the doors. Edges of the shutters to be covered with teak wood beading complete all as specified and as directed.(NOTE: Each leaf to be measured separately). |
| 35 | Removing the existing unserviceable broken back ply of bin linen multipurpose and supply and fixing new 6 mm thick BWP grade plywood conforming to IS: 710 complete all as specified and as directed. |
| 36 | Removing the existing unserviceable/ broken drawers of bin linen multipurpose and supply and fixing new drawers all the sides bottom etc to be made out of 12mm thick PLMDF board exterior grade also fixing of 40 mm knob of matching colour as per shade of board alongwith one set of telescopic channel complete all as specified and as directed. |
| 37 | Preparation of surface and French polishing to side board inner and outer except prelaminated portion complete all as specified and as directed. |
| 38 | REPAIR TO CHAIR DINNING (FD- 279) |
| 39 | Removing the existing unserviceable/broken rear leg and supply and fix 1st class hard wood teak rear leg complete all as specified and as directed. (Note : Each leg shall be measured separately) |
| 40 | Removing the existing unserviceable/ broken front leg and supply and fix 1st class hard wood teak front leg complete all as specified and as directed. (Note : Each leg shall be measured separately). |
| 41 | Removal of existing unserviceable back rest batten and supply and fix new back rest batten made out of 1st class hard wood teak of size complete all as specified and as directed. |
| 42 | Removing the existing unserviceable/ broken plastic cane and supply and canning with new plastic cream colour cane 2 mm wide and 0.5mm thick, 4 mm thick for borders for canning of chair complete all as specified and as directed. |
| 43 | Supply and fix stiffeners for chairs made out of 25 x 20 mm 1st class hard wood teak after removing the existing unserviceable stiffeners complete all as specified and as directed. |
| 44 | French polishing to wooden surfaces of repaired chairs (old and new surfaces) complete all as specified and as directed. |
| 45 | REPAIR TO CHAIR DINNING WITH PVC SEAT (FD/MAP-II/05) |
| 46 | Removing the existing unserviceable/broken rear leg and supply and fix 1st class hard teak wood rear leg complete all as specified and as directed. (Note : Each leg shall be measured separately) |
| 47 | Removing the existing unserviceable/ broken front leg and supply and fix 1st class hard wood teak front leg complete all as specified and as directed. Note : Each leg shall be measured separately. |
| 48 | Removing the existing unserviceable/ broken PVC seat of chair dining and supply and fix new PVC Seat complete all as specified and as directed. |
| 49 | Removal of existing unserviceable back rest batten and supply and fix new back rest batten made out of 1st class hard wood teak of size complete all as specified and as directed. |
| 50 | Supply and fix stiffeners for chairs made out of 20 X 25 mm 1st class hard wood teak under the seat irrespective of what shown on drawings complete all as specified and as directed. |
| 51 | Supply and fix stiffeners for chairs made out of 20 X 25 mm 1st class hard wood teak after removing the existing unserviceable stiffeners complete all as specified and as directed. |
| 52 | French polishing to wooden surfaces of repaired chairs (old and new surfaces) complete all as specified and as directed. |
| 53 | REPAIR TO CHAIR DINNING CUSHIONED/LONG BACK (FD/MAP-II/04) |
| 54 | Removing the existing worn out seat cushion and supply and fix new PU foam seat foam of size 450X450X75mm thick density 50-55 Kg/cum with 12 mm thick plywood BWP grade phenol bonded covered with tapestry cloth of not less than 350/- per RM for chair dining cushioned complete all as specified and as directed. |
| 55 | Removing the existing unserviceable/broken rear leg and supply and fix 1st class hard teak wood rear leg complete all as specified and as directed. Note : Each leg shall be measured separately |
| 56 | Removing the existing unserviceable/ broken front leg and supplying and fixing 1st class hard wood teak front leg complete all as specified and as directed. Note : Each leg shall be measured separately |
| 57 | Preparation of surfaces and French polishing to wooden surfaces for repaired chairs and applying two or more coat French polish on new surfaces and one coat on old surfaces to match uniform shade complete all as specified and as directed. |
| 58 | REPAIR TO CHAIR WRITING (FD- 280) |
| 59 | Removing the existing unserviceable/ broken rear leg and supply and fix 1st class hard wood teak rear leg complete all as specified and as directed. Note : Each leg shall be measured separately |
| 60 | Removing the existing unserviceable/ broken front leg and supplying and fixing 1st class hard wood teak front leg complete all as specified and as directed. Note : Each leg shall be measured separately |
| 61 | Removing the existing unserviceable/broken arm rest and supplying and fixing 1st class hard wood teak arm rest complete all as specified and as directed. (Note : Each arm rest shall be measured separately). |
| 62 | Removing the existing unserviceable/ broken plastic cane and supplying and canning with new plastic cream colour cane 2 mm wide and 0.5mm thick 4 mm thick for borders for canning of chair complete all as specified and as directed. |
| 63 | Supply and fix stiffeners for chairs made out of 25 X 20 mm 1st class hard wood teak after removing the existing unserviceable stiffeners complete all as specified and as directed. |
| 64 | French polishing to wooden surfaces of repaired chairs (old and new surfaces) complete all as specified and as directed. |
| 65 | REPAIR TO SIDE BOARD (FD-1112) |
| 66 | Removing the existing unserviceable/ broken shutter and broken sides of side board and supply and fix new shutter made of 18 mm thick pre laminated MDF board exterior Grade I and type II (PLMDF-12 designation) conforming to 14587:1998 (Re-affirmed 2003)the colour of the prelaminated MDF board shall be of shade BEIGE/Chocolate/Mehogany/Wall nut chest/Naina teak shutter should be fixed with 40 mm wide chromium plated continuous piano hinges including CP handle, 100 mm long,01 Nos knob and magnetic catcher to stick the doors. Edges of the Shutters to be covered with teak wood beading complete all as specified and as directed. NOTE: Each leaf to be measured separately. |
| 67 | Removing the unserviceable broken back ply of side board and supply and fixing new 6 mm thick BWP grade plywood conforming to IS: 710 complete all as specified and as directed. |
| 68 | Removing the unserviceable/ broken drawers of side board and supply and fixing new drawers made of front 18 mm thick prelaminated MDF board exterior grade as per existing shade both one side laminated and other side white balancing paper rest all the sides bottom etc to be made out of 12mm thick PLMDF Board exterior grade also fixing of 40 mm knob of matching colour as per shade of board alongwith one set of telescopic channel complete all as specified and as directed. |
| 69 | Preparation of surface and French polishing to side board inner and outer except prelaminated portion complete all as specified and as directed. |
| 70 | REPAIR TO TABLE DINING 4/6 PERSON (FD/MAP-II/03) |
| 71 | Removing the existing unserviceable/ broken top of table dining 4 person and supply and fix new top of 1200x900mmx18 mm thick pre-laminated MDF board exterior grade I and type II (PLMDF-12 designation) conforming to 14587:1998 (Re-affirmed 2003)the colour of the Prelaminated MDF board shall be of shade BEIGE/Chocolate/Mehogany/Wall nut chest shade with edges covered with teak wood beading complete all as specified and as directed. |
| 72 | Removing the existing unserviceable/ broken top of table dining 6 person and supply and fix new top of 1500x900mmx18 mm thick pre laminated MDF board exterior Grade I and type II (PLMDF-12 designation) conforming to 14587:1998 (Re-affirmed 2003)the colour of the Prelaminated MDF board shall be of shade BEIGE/Chocolate/Mehogany/Wall nut chest shade with edges covered with teak wood beading complete all as specified and as directed. |
| 73 | Removing the existing unserviceable/ broken top long rail of table dining 4 person and supply and fix new long rail made of 1st class hard wood teak of size complete all as specified and as directed. |
| 74 | Removing the existing unserviceable/broken top short rail of table dining 4 person and supply and fix new short rail made of 1st class hard wood teak of size complete all as specified and as directed. |
| 75 | Removing the existing unserviceable/ broken leg of Table dining 4 person and supply and fix new leg made of 1st class hard wood teak complete all as specified and as directed. |
| 76 | Preparation of wooden surface and applying French polishing to table dining 4/6 persons except laminated portion complete all as specified and as directed. |
| 77 | REPAIR TO TABLE DRESSING LADIES (FD/MAP-II/07) |
| 78 | Removing the existing unserviceable/ broken drawers of table dressing ladies and supply and fix new drawers front made of 18 mm thick prelaminated MDF board and bottom of drawer with 6 mm thick BWP grade plywood confirming to IS: 710 duly fixed with aluminium anodised knobs 40 mm complete all as specified and as directed. |
| 79 | Removing the existing unserviceable/ broken mirror with 6mm thick back plywood of table dressing ladies and supply and fix new mirror minimum 5 mm thick suitable for the existing frame alongwith 6mm thick BWP grade plywood back complete all as specified and as directed. |
| 80 | Removing the existing unserviceable/broken sides of table dressing ladies and supply and fix in repair new sides made out of 18 mm thick pre laminated MDF board exterior grade I and type II (PLMDF-12 designation) conforming to 14587:1998 (Re-affirmed 2003)the colour of the Prelaminated MDF board shall be of shade BEIGE/Chocolate/Mehogany/Wall nut chest shade with edges covered with teak wood beading complete all as specified and as directed. |
| 81 | Replacement of existing foam cushion of stool dressing cushion seat including existing tapestry cloth of Stool dressing cushion seat and supply and fix new PU Moulded foam 50-55 kg per cubic meter density of size 400 x 330 x 80mm thick duly stitched with tapestry cloth and closed with Velcro of suitable size complete all as specified and as directed. Note: Tapestry cloth shall not be less than Rs. 350.00 Per RM. |
| 82 | Preparation of old surface and French polishing to Table dressing ladies except laminated portion complete all as specified and as directed. |
| 83 | REPAIRS TO DRESSING MIRROR GENTS (FD/E6/MAP/16) |
| 84 | Removing of existing unserviceable 12 mm plywood from dressing mirror gents and supply and fix new ply of size 1200x600mm of BWP Grade confirming to IS:710 complete all as specified and as directed. |
| 85 | Removing of existing unserviceable prelaminated particle board and supply and fix of 18 mm thick pre laminated MDF board exterior grade I and type II (PLMDF-12 designation) conforming to 14587:1998 (Re-affirmed 2003) the colour of the prelaminated MDF board shall be of shade BEIGE/Chocolate/Mehogany/Wall nut chest shade with edges covered with teak wood beading complete all as specified and as directed. |
| 86 | Removing of existing unserviceable magnets and supply and fix new magnets complete all as specified and as directed. |
| 87 | REPAIR TO TABLE WRITING (FD-275) |
| 88 | Removal of existing unserviceable leg and supply and fix new leg made out of 1st class hard teak wood complete all as specified and as directed. |
| 89 | Removal of existing unserviceable knob/handle of drawer from front shutter of cabinet and supply and fix new aluminium anodised knob/ handle heavy duty of quality complete all as specified and as directed. |
| 90 | Removal of existing unserviceable side of cabinet of table and supply and fix new side of cabinet including shutter and lock made out of 18 mm thick pre laminated MDF board exterior grade I and type II (PLMDF-12 designation) conforming to 14587:1998 (Re-affirmed 2003)the colour of the prelaminated MDF board shall be of shade BEIGE/Chocolate/Mehogany/Wall nut chest shade with edges covered with teak wood beading complete all as specified and as directed. |
| 91 | Removal of unserviceable top and supply and fix new top of size 1145mm x 600mm made out of 18 mm thick pre laminated MDF board exterior grade I and type II (PLMDF-12 designation) conforming to 14587:1998 (Re-affirmed 2003) the colour of the Prelaminated MDF board shall be of shade BEIGE/Chocolate/Mehogany/Wall nut chest shade complete all as specified and as directed. |
| 92 | Material and labour for French polishing of complete table exposed to view except laminated portion complete all as specified and as directed. |
| 93 | REPAIR TO TEAPOY (FD-382) |
| 94 | Removing the existing unserviceable teapoy Top and supply and fix new top of size 450x600mm made out of 18 mm thick pre laminated MDF board exterior grade I and type II (PLMDF-12 designation) conforming to 14587:1998 (Re-affirmed 2003)the colour of the Prelaminated MDF board shall be of shade BEIGE/Chocolate/Mehogany/Wall nut chest shade with edges covered with teak wood beading including french polishing to wooden surface to match the existing surfaces of repaired table centre apply one coat French polish on new surfaces and one coat on old surfaces to match uniform shade complete all as specified and as directed. |
| 95 | REPAIR TO CHAIR EASY (FD 229) |
| 96 | Removing the existing unserviceable/broken rear leg and supply and fix 1st class hard wood teak rear leg complete all as specified and as directed. Note : Each leg shall be measured separately. |
| 97 | Removing the existing unserviceable/ broken front leg and supplying and fixing 1st class hard wood teak front leg complete all as specified and as directed. Note : Each leg shall be measured separately. |
| 98 | Removing the existing unserviceable/ broken arm rest and supplying and fixing 1st class hard wood teak arm rest complete all as specified and as directed. Note : Each arm rest shall be measured separately. |
| 99 | Removing the existing unserviceable/ broken plastic cane and supplying and canning with new plastic cream colour cane complete all as specified and as directed. |
| 100 | Supply and fix stiffeners for chairs made out of 25 x 20 mm 1st class hard wood teak after removing the existing unserviceable stiffeners complete all as specified and as directed. |
| 101 | French polishing to wooden surfaces of repaired chairs (old and new surfaces) complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 17, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 08, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 13 daysOct 15, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 20 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender