Tender For Construction Of Centralized Pipe Storage Yard With Reinforced Cement Concrete Support Pedestals And Concrete Pavement At Gspl Delivery Station, Betkuchi, Guwahati For Systematic Storage, Handling And Preservation Of Line Pipes
Tender Value
12.11 Lakhs
Estimated cost
Bid Submission
01 Oct 2026
4 days left
EMD
Ref. Documents
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kamrup Metro → Assam
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Centralized Pipe Storage Yard With Reinforced Cement Concrete Support Pedestals And Concrete Pavement At Gspl Delivery Station, Betkuchi, Guwahati For Systematic Storage, Handling And Preservation Of Line Pipes
BOQ
| Sl. No. | Item Description |
| 1 | GST % for the tender Please select the rate of GST in cell AY13. Rate selected shall be applicable for the entire BoQ. |
| 2 | Pipe Stackyard at Betkutchi 35mX16m |
| 3 | Clearing grass and removal of the rubbish up to a distance of 50 m outside the periphery of the areacleared. |
| 4 | Earth work in excavation by mechanical means (Hydraulic excavator) /manual means over areasincluding trimming of sides of the trenches, dressing, ramming and levelling the bottom of the trenchescorrect to level, grade etc. including filling in sides of foundation trenches, plinth etc. with theexcavated earth available and/or depositing the excess earth within station area limits, in layers notexceeding 20 cms. thick, consolidating each deposited layer by ramming, watering, dressing to level andgrade, complete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as perdrawings, specifications and direction of Site Engineer. In all kinds of soil |
| 5 | Supplying and filling selected earth/moorum (excluding black cotton soil) from Contractor's ownborrow areas including royalty, with all leads and lifts in low laying area sand filling to required gradeand level including watering, compacting at optimum moisture content to90% of Proctor's density,consolidation and rolling with 8 to10 tonne power roller in layers not exceeding 20cm thickness,complete in all respects inclusive of cost of all labour, materials, tools, tacklesetc. as per drawings, specifications and directions of the Engineer-in-Charge. |
| 6 | Providing and laying in position cement concrete of specified grade at all depths including ramming & shuttering etc. complete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per drawings, specifications and direction of Site Engineer: 1:4:8 [1 cement : 4 coarse sand (Zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources] |
| 7 | Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland / Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, the cost of centering, shuttering, finishing, curing, carriage for all leads, as per direction of the engineer-in-charge, for the following grades of concrete.: Note: Extra cement upto 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either redesign the mix or bear the cost of extra cement. Payment for Reinforcement shall be made as per relevant item of SOR. All works upto plinth level. Concrete of M25 grade with minimum cement content of 330 kg/cum |
| 8 | Steel reinforcement for R.C.C. work including initial straightening of coiled/uncoiled bars, removal of loose rust, cutting, bending to correct size & shape, binding with 18 gauge G.I. wire at each intersection and placing at any position, at any height and depth complete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per drawings, specifications and direction of Site Engineer.: Thermo-Mechanically Treated bars of grade Fe-500 D or more |
| 9 | Add for using extra cement in the items of design mix over and above the specified cement contentthere in. [Note: Unit \\"QN\\" shall mean \\"QUINTAL\\"] Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 17, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 01, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysOct 02, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender