Tender For Special Repair For Conversion Of Lt Oh Line To Lt Ug Cable At Dacca Colony And 444 Coy Asc (Sup) Area At Masimpur Mil Stn
Tender Value
44.70 Lakhs
Estimated cost
Bid Submission
09 Oct 2026
20 days left
EMD
89400
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Cachar → Assam
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repair For Conversion Of Lt Oh Line To Lt Ug Cable At Dacca Colony And 444 Coy Asc (Sup) Area At Masimpur Mil Stn
BOQ
| Sl. No. | Item Description |
| 1 | E & M Division Items |
| 2 | Dismantling of old unserviceable/damaged ACSR or AAC conductors of any size , jumper from overhead line & stacking serviceable & non serviceable material separately complete all as specified and directed. |
| 3 | Dismantling of old unserviceable/damaged stay assembly embedded in concrete including demolition of PCC and removing unserviceable meterials from site of work complete all as specified and directed. |
| 4 | Dismantling of cross-arms of MS channel or angle of any sections complete all as specified and directed. |
| 5 | Dismantling of insulators of any size/type complete all as specified and directed. |
| 6 | Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth for laying of cable/poles and getting out in soft/loose soil complete all as specified and directed. |
| 7 | Returning, filling in trenches with soil obtained from excavation including spreading, leveling, watering and well ramming in layers not exceeding 25 cm thick complete all as specified and directed. |
| 8 | Removing excavated materials to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 metre above the starting point all all as specified and as directed. |
| 9 | Supply and spread dry fine sand in trenches as sand cushioning to under ground cable for protection with fine river sand and provide reqd cover after punning down complete all as specified and directed. Note: Thickness of sand cushioning after punning down will be measured and paid separately. |
| 10 | Supply and laying burnt bricks of sub-class 'B' of size 230mmX115mmX75mm laid in trenches for cable protection complete all as specified and as directed |
| 11 | M&L for cutting existing road/PCC drain for taking out / laying of underground cable and including necessary earth work and making good to match with the existing surface filling with PCC 1:3:6 type C-1 using 20mm graded stone aggregates for road cutting repair work size 0.45m wide and 150mm depth etc complete all as specified and directed. |
| 12 | Supply, fixing, commissioning & testing of LT XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, Electric power cable (heavy duty) with aluminium conductors, cross sectional area 10 sqmm 4 core 1100 volts grade laid in trenches/fixed to wall/under road/pipe etc with copper cable glands & copper thimbles complete all as specified and directed. Note: Necessary earth work will be measured and paid separately under respective items |
| 13 | Supply, fixing, commissioning & testing of LT XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, Electric power cable (heavy duty) with aluminium conductors, cross sectional area 16 sqmm 4 core 1100 volts grade laid in trenches/fixed to wall/under road/pipe etc with copper cable glands & copper thimbles complete all as specified and directed. Note: Necessary earth work will be measured and paid separately under respective items |
| 14 | Supply, fixing, commissioning & testing of LT XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, Electric power cable (heavy duty) with aluminium conductors, cross sectional area 35 sqmm 3.5 core 1100 volts grade laid in trenches/fixed to wall/under road/pipe etc with copper cable glands & copper thimbles complete all as specified and directed. Note: Necessary earth work will be measured and paid separately under respective items |
| 15 | Supply, fixing, commissioning & testing of LT XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, Electric power cable (heavy duty) with aluminium conductors, cross sectional area 50 sqmm 3.5 core 1100 volts grade laid in trenches/fixed to wall/under road/pipe etc with copper cable glands & copper thimbles complete all as specified and directed. Note: Necessary earth work will be measured and paid separately under respective items |
| 16 | Supply, fixing, commissioning & testing of LT XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, Electric power cable (heavy duty) with aluminium conductors, cross sectional area 70 sqmm 3.5 core 1100 volts grade laid in trenches/fixed to wall/under road/pipe etc with copper cable glands & copper thimbles complete all as specified and directed. Note: Necessary earth work will be measured and paid separately under respective items |
| 17 | Supply, fixing, commissioning & testing of LT XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, Electric power cable (heavy duty) with aluminium conductors, cross sectional area 95 sqmm 3.5 core 1100 volts grade laid in trenches/fixed to wall/under road/pipe etc with copper cable glands & copper thimbles complete all as specified and directed. Note: Necessary earth work will be measured and paid separately under respective items |
| 18 | Supply, fixing, commissioning & testing of LT XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, Electric power cable (heavy duty) with aluminium conductors, cross sectional area 120 sqmm 3.5 core 1100 volts grade laid in trenches/fixed to wall/under road/pipe etc with copper cable glands & copper thimbles complete all as specified and directed. Note: Necessary earth work will be measured and paid separately under respective items |
| 19 | Supply, fixing, commissioning & testing of LT XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, Electric power cable (heavy duty) with aluminium conductors, cross sectional area 240 sqmm 3.5 core 1100 volts grade laid in trenches/fixed to wall/under road/pipe etc with copper cable glands & copper thimbles complete all as specified and directed. Note: Necessary earth work will be measured and paid separately under respective items |
| 20 | Supply and laid 40mm bore GI Pipe medium grade for cable protection complete including taking down old unserviceable pipe all as specified and directed by Engineer-in-Charge. |
| 21 | Supply and laid 50mm bore GI Pipe medium grade for cable protection complete including taking down old unserviceable pipe all as specified and directed by Engineer-in-Charge. |
| 22 | Supply and laid 80mm bore GI Pipe medium grade for cable protection complete including taking down old unserviceable pipe all as specified and directed by Engineer-in-Charge. |
| 23 | Supply and fix HOT moulded (FRP) jucntion box for street light pole with locking arrangementt with IP -65 protection of size 205mm X 210mmX112mm with heavy duty terminal block 60 Amp 4 way with MCB SP 10 Amps with two steel bracket to fix with pole complete all as specified and directed by Engr - in - charge. |
| 24 | S&F GI bracket suitable for street light fitting made out of 40mm dia GI tubing of light grade bent to shape of 1.5m length complete including taking out old one complete all as specified and directed by Engineer-in-Charge. |
| 25 | S&F PVC non-metallic conduit pipe 20mm bore complete all as specified and directed. |
| 26 | S&F PVC insulated and sheathed cable with stranded copper conductor of size 1.5 sqmm 3 core , 1100 volt grade complete all as specified and directed. |
| 27 | Supply, install ,test & commissioning LT panel Outdoor, Floor mounted/pedestal type,cubical,self supported,CPRI approved make,front and rear openable, double door hinged type with locking arrangement and suitable ventilations on both sides IP 52 protection with dust and vermin proof etc,fabricated out of 3.15 mm CRCA sheet duly powder coated, mounted /fixed on and including MS angle iron stand of 1 Mtr height (50 Cm above FFL and 50 Cm below FFL), fabricated out of 50 X50 X6 mm thick MS angles duly painted with two coats of Black enamel synhetic paint over one coat of red oxide primer duly grouted in PCC 1:3:6 foundation,control wiring copper stranded PVC insulated FRLS cables & interconnections od suitable size/ capacity of copper Strips for swirch gear connections from main bus bar,earth bus strip of 25 x 3 mm size for entire length of panel, Suitable size of MS gland with gland plate and aluminium lugs/thumbles for all incoming and outgoing cables etc. complete all as specified and directed by the enginner -in - charge including and accommodating the followings: (a) MCCB TPN 320 Amps 25ka - 1 No (01 No Incomer) (b) MCCB TPN 200 Amps 25ka -1 No (outgoing) (c) MCCB TPN 100 Amps 25ka -3 No (outgoing) (d) MCCB TPN 63 Amps 25ka -1 No ( No outgoing ) (e) LED type three Phase indicator with controlling fuses for RYB -01 set (f) 3 phase multifunction energy meter (voltage 0-500V amper 1-125 A and energy consumption in KWH or units consumption including CT's and PT's ) (g) Electrolyte Aluminium busbars PVC colour sleeved 500 Amps capacity TP and 250 Amps for neutral mounted on hygroscopic insulator duly colour coded RYB & Green sleeves (F) Astronomical timer with contactor and TPN-01 No. |
| 28 | Supply, install ,test & commissioning LT panel Outdoor, Floor mounted/pedestal type,cubical,self supported,CPRI approved make,front and rear openable, double door hinged type with locking arrangement and suitable ventilations on both sides IP 52 protection with dust and vermin proof etc,fabricated out of 3.15 mm CRCA sheet duly powder coated, mounted /fixed on and including MS angle iron stand of 1 Mtr height (50 Cm above FFL and 50 Cm below FFL), fabricated out of 50 X50 X6 mm thick MS angles duly painted with two coats of Black enamel synhetic paint over one coat of red oxide primer duly grouted in PCC 1:3:6 foundation,control wiring copper stranded PVC insulated FRLS cables & interconnections od suitable size/ capacity of copper Strips for swirch gear connections from main bus bar,earth bus strip of 25 x 3 mm size for entire length of panel, Suitable size of MS gland with gland plate and aluminium lugs/thumbles for all incoming and outgoing cables etc. complete all as specified and directed by the enginner -in - charge including and accommodating the followings: (a) MCCB TPN 200 Amps 25ka - 1 No (01 No Incomer) (b) MCCB TPN 63Amps 16ka - 6 No (01 No Incomer) (c) LED type three Phase indicator with controlling fuses for RYB -01 set (d) 3 phase multifunction energy meter (voltage 0-500V amper 1-125 A and energy consumption in KWH or units consumption including CT's and PT's ) (e) Electrolyte Aluminium busbars PVC colour sleeved TP 400 Amps and neutral 200 Amps mounted on hygroscopic insulator duly colour coded RYB & black sleeves |
| 29 | Supply, fabricated, install, test, and commissioning LT outdoor panel weather proof, dust/vermin proof, made out of 3.15mm thick CRCA sheet double openable door with angle iron frame and locking arrangement , including bus bar suitable for 3 phase 4 wire system, 415v, 50Hz, AC supply wth bus bar aluminium 400 Amps capacity including with PVC sleeves / taps RYB colours for phases indication, confirming to IP-54, and fixed on raised PCC platform with PCC 1:2:4, type B1 (20 mm graded aggregate) raised base with control wiring and compressing cable gland brass, copper/brass lugs etc confirming to CPRI approved manufacture , complete all as specified and directed by the Engineer-in-charge including and accommodating the followings:Note; All MCCBs are of thermal megnetic release with adjustable type overload protection, shortcircuit protection.(a) MCCB 4 pole 160 Amps 50Hz, 415 V,36 KA -01 no (for incoming) (b) TPN Bus bar Aluminium 300 Amp-01 (outgoing), mounted on hygroscopic insulator duly colour coded RYB & Green sleeves (c) LED type three Phase indicator with controlling fuses for RYB -01 set (d) 3 Phase Digital panel meter for Amp,Volt,KWH, power factor and other parameter flush mounting of size 96 x96 mm,Current Transformer of suitable rating - Set of three (e) LED type three Phase indicator with controlling fuses for RYB -01 set |
| 30 | M&L for Steel Tubular Swaged Poles Type 410-SP-31(09 Metre long) including cast iron base plate, finial taper plug, cap, mild steel bolts, screws, etc. including applying two coats of black bituminous paint internally and externally upto planting depth and applying two coats of aluminium paint over a coat of aluminium primer (externally from top of RCC copping) including painting of black & white alternate strip of 30cm each externally from ground level upto 1.2m and writing MES Pole No. with synthetic enamel paint (first grade quality) complete all as specified directed by Engr-in-Charge. Note: 1. All Earth work will be measured and paid seperatly in respective items.2. Rate of All PCC work shall be inclusive of qouted rate of this item. Detail work of foundation as Excavation of fdnSize:- 0.9x0.9x1.8 mtr, foundation filling (0.6*0.6*1.8) by cement concrete type C2 1:3:6 (40mm graded crushed stone aggregates), PCC 1:3:6, type C-1, using 20mm graded stone aggregate add in coping (0.3x0.3x0.3) of poles, |
| 31 | M & L for new earthing with galvanised steel earth plate electrode 600mm X 600mm X 6mm thick buried directly in ground (earth pit Each set not less than 2.25 mitr below ground level) with top edge of the plate not less than 1.5 mtr below ground level and connected to 32X6 mm thick Gl strip protected by 40 mm bore light grade galvanised iron pipe and other end connected to sest point as directed including funnel with wire mesh and watering pipe 20 mm bore medium grade galvanised iron pipe with charcoal and common salt in alternater layers of 15 cm thickness all around the Gi plate electrode with concrete pit in PCC 1:3:6 type C-1 with cast iron frame including cast iron cover 10mm thick hinged to CI frame and 6mm MS rod for handie, necessary excavation and earth wok in hard/dense soil and disposal of soil to a distance not exceeding 50 m and necessary testing complete all as shown in electrical plate No 3 of SSR part-I all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 17, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 09, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 20 daysOct 12, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 23 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender