Tender For Supply, Installation, Testing And Commissioning Of Fire Protection System And Annual Maintenance Contract For A Period Of 3 Years To The Primary Health Centre At Betki
Tender Value
26.33 Lakhs
Estimated cost
Bid Submission
29 Sep 2026
7 days left
EMD
52667
Bank guarantee accepted
Document Fee
6000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
goa → Goa
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Supply, Installation, Testing And Commissioning Of Fire Protection System And Annual Maintenance Contract For A Period Of 3 Years To The Primary Health Centre At Betki
BOQ
| Sl. No. | Item Description |
| 1 | Supplying and installing, testing, perfect aligning and proper levelling and commissioning of fire service main pump, of 2850 LPM (Litres/min.) at 40 m head centrifugal type single stage pump, 50 HP, (37 kW). Rates including RCC foundation and the foundation size should be as per IS standard, bolting etc complete as per IS Specification & Engineers Instructions. ( Make - KBL/Crompton/Grundfos/Mather) |
| 2 | Supplying and installing, testing, perfect aligning and proper levelling and commissioning of Diesel operated fire service stand by pump, of 2850 LPM, at 40m head centrifugal type single stage pump, 50HP including all accessories like 200 lit fuel tank, 12 Volts 21Ah battery, exhaust pipe of 3M length with silencer, with suitable foundation, bolting etc complete as per IS Specification & Engineers Instruction.Incase of failure in elect pump the diesel engine pump shall operate automatically with standard facility switch gear suitable for operating pumps: made of CRCA sheet to be used for fabrication of boxes panel boards etc. Including Pumps Termination to the Panel. ( Make-L&T/Schneider/ Siemens). Rates including RCC foundation and the foundation size should be as per IS standard, bolting etc complete as per IS Specification & Engineers Instruction. |
| 3 | Supplying installing, testing, commissioning of Jockey Pump of 180 LPM at 50 m head, 3 ph. 440 A.C. 10 HP, (11 Kw).Rates including RCC foundation and the foundation size should be as per standard.( Make - KBL/Crompton/Grundfos/Mather) |
| 4 | Supply, fabrication, erection, testing, and commissioning of 150 mm dia size of GI ERW C class pipe (conforming to IS-1239) erection on above ground (including proper iron supports and anchor fasteners) with all fittings (Standard MS fittings with welded joint shall be used on the pipes) including Tees, elbows, reducers, unions, flanges, rubber gaskets, GI nuts/bolts/washers/tie-bolt supports, and applying 2 Red oxide primer, 2 coat of synthetic enamel paint as per specification no. FF-PP. |
| 5 | Supply, fabrication, erection, testing, and commissioning of 100 mm dia size of GI ERW C class pipe (conforming to IS-1239) erection on above ground (including proper iron supports and anchor fasteners) with all fittings (Standard MS fittings with welded joint shall be used on the pipes) including Tees, elbows, reducers, unions, flanges, rubber gaskets, GI nuts/bolts/washers/tie-bolt supports, and applying 2 Red oxide primer, 2 coat of synthetic enamel paint as per specification no. FF-PP. |
| 6 | Supply, fabrication, erection, testing, and commissioning of 100 mm dia size of GI ERW C class pipe (conforming to IS-1239) laying on under gound (including pipe trench excavation and refilling) with all fittings (Standard MS fittings with welded joint shall be used on the pipes) including Tees, elbows, reducers, unions, flanges, rubber gaskets, GI nuts/bolts/washers/tie-bolt supports, and clamps with coating of bitumen paint and 4 mm thick wrapping as per specification no. FF-PP. |
| 7 | Supply, fabrication, erection, testing, and commissioning of 75/80 mm dia size of GI ERW C class pipe (conforming to IS-1239) erection on above ground (including proper iron supports and anchor fasteners) with all fittings (Standard MS fittings with welded joint shall be used on the pipes) including Tees, elbows, reducers, unions, flanges, rubber gaskets, GI nuts/bolts/washers/tie-bolt supports, and applying 2 Red oxide primer, 2 coat of synthetic enamel paint as per specification no. FF-PP. |
| 8 | Supply, Fabrication, Erection, Testing, and commissioning of the following sizes of G.I. ERW C class pipes (conforming to IS -1239), Erection Above Ground (including proper iron supports and anchor fastners), and Laying on Underground with all fittings (standard MS fitting with welded joint shall be used on the pipes) including tees, elbows, reducers, union, flanges, rubber gaskets, GI nuts bolts. Washer, tie bolt supports and clamps, etc., with one coat of red oxide primer and one coat of synthetic enamel paint.50 mm |
| 9 | Supplying and Erecting MS/CRCA cabinet for housing Floor Hydrant valve, hose pipe, hose reel and branch pipe (size 800mm x 600mm x 250mm.) made from 16 SWG sheet and angle iron 25 mm. x 25 mm. x 4 mm. having front doors with viewing glass (8\\" x 6\\") and locking arrangement with necessary fixing material such as rubber bidding etc. duly painted in post box red colour. ( Make-Newage/Safex/Safeguard) |
| 10 | Supplying , Installing, Testing and Commissiong of fire fighting R.R.L. Hose pipe, 63mm dia, 15 m in length, fitted with necessary accessories such as male and female couplings. ISI mark. ( Make-Newage/Safex/Safeguard ) |
| 11 | Supplying , Installing, Testing and Commissiong of SS single outlet hydrant valve fitted with necessary accessories such as blank cap attached with G.I chain etc. ISI mark. (Make- Newage/Safex/Safeguard ) |
| 12 | Supplying , Installing, Testing and Commissiong of wall mounting swinging Hose reel drum fitted with 19 mm dia. 30 meter long high pressure polypropylene (Polyhose) long fitted with necessary accessories. ISI mark. |
| 13 | Supplying , Installing, Testing and Commissiong of cast iron double flange butterfly valve of size 150 mm dia. Complete. ISI mark. With P.N 1.6.( Make-Zoloto/Audco/Kbl/Leader ) |
| 14 | Supplying , Installing, Testing and Commissiong of cast iron double flange butterfly valve of size 100 mm dia. Complete. ISI mark. With P.N 1.6.( Make-Zoloto/Audco/Kbl/Leader ) |
| 15 | Supplying , Installing, Testing and Commissiong of cast iron double flange butterfly valve of size 80 mm dia. Complete . ISI mark. With P.N 1.6.( Make-Zoloto/Audco/Kbl/Leader ) |
| 16 | Supplying , Installing, Testing and Commissiong of cast iron double flange NRV of size 100 mm dia. Complete. ISI mark. With P.N 1.6. ( Make-Zoloto/Audco/Kbl/Leader ) |
| 17 | Supplying , Installing, Testing and Commissiong of cast iron double flange NRV of size 80 mm dia. Complete. ISI mark. With P.N 1.6. ( Make-Zoloto/Audco/Kbl/Leader ) |
| 18 | Supplying , Installing, Testing and Commissiong of cast iron double flange NRV of size 50 mm dia. Complete. ISI mark. With P.N 1.6. ( Make-Zoloto/Audco/Kbl/Leader ) |
| 19 | Supply, Installation, Testing, and Commissioning of C.I foot valve flanged end including rubber gasket, nuts bolts, and washers.100 mm |
| 20 | Supply, installation, programming & commissioning of Single Loop Analog addressable (expandable) type fire Alarm panel 230V AC, standby battery & battery charger with LCD display voice evacuation system facility to integrated control module ,monitor module, detectors like photo electric detectors & standard facilities with inbuilt Battery Backup of a minimum 24 hours in normal condition and 30 min in alarm condition, suitable provision for network connectivity, interfacing with third party equipment via a MODBUS/ OPC/ L-ON interface etc. conforming to IS 15908:2021, ,IS 2189: 2008, EN 54 & VDS / FM/ UL 864 (10th edition) with 3 years replacement warranty FF-AFAS/CP. |
| 21 | SITC of wall mounting type or floor mounting type electrical control panel for fire fighting pumps with suitable conductors, suitable switch gear, indicating lamps fuses, volt meter Ammeter, selector switches, single phase preventer interlocking arrangement between electric motor driven pump & diesel Engine driven Pump, so that only one pump can operate at one time. Incase of power failure ,Diesel pump will start automatically. CRCA sheet to be used for fabrication of boxes panel boards etc. including cutting, bending, drilling, welding, riveting etc. and painting with one coat of red lead paint and 2 coats of enamel paint., and testing. Following pumps : a. Main Fire Pump 50HP - 01 Nos b. Diesel Pump 50HP - 01 Nos, c. Jockey Pump 10 HP -01 Nos. Complete work as per enclosed Annexure - I. |
| 22 | Supplying & Installing One piece moulded HDP / Fibre water tank, for ~ve suction only, having capacity 1000 Itrs.fitted with necessary accessories complete. |
| 23 | Supplying , Installing, Testing and Commissiong of fire brigade header (siamese connection) of 150mm Ø for supplying water to wet riser system . ISI mark. ( Make-Newage/Safex/Safeguard ) |
| 24 | Supplying , Installing, Testing and Commissiong of Air Vessel of 300 mm Ø 1.5 m. in height M.S. tank installed inside pump house along with all the accessories such as gauge, Isolation valve etc.. (including safety valve).( Make-Jindal/Tata/Zenith) |
| 25 | Supplying , Installing, Testing and Commissiong of pressure gauge of 100mm, 300 psi or 0-21kg per cm square fitted wih 12/15mm Ø pad cock valve and G.I. pipe elbow etc as per requirement in an approved manner. ( Make-H-Guru/Fiebig/Danfoss) |
| 26 | Supplying , Installing, Testing and Commissiong of pressure switch with 12/15mmØ isolation valve, G.I nipple elbow etc in an approved manner along with all the accessories.( Make-Danfoss/Switzer/Honeywell) |
| 27 | Supplying , Installing, Testing & Commissioning of Addressable Manual Call Point (Pill box) with break glass push button in metal enclosure .( Make-System Sensor/Ravel/Agni ) |
| 28 | Supplying , Installing, Testing & Commissioning of Addressable type Sounder 90DB level with CRCA enclosure complete. ( Make-System Sensor/Ravel/Agni ) |
| 29 | Supply of 2 core armoured PVC/XLPE insulated PVC sheathed copper conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) IS:7098(Part I) with latest amendments of following size.;2 Core 1.5 sq.mm |
| 30 | Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size not exceeding 25 sq.mm on surface etc. complete as required |
| 31 | Supply of 3 core armoured PVC/XLPE insulated PVC sheathed aluminium conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) IS:7098(Part I) with latest amendments of following size.;3 Core 70 sq.mm |
| 32 | Supply of 3 core armoured PVC/XLPE insulated PVC sheathed aluminium conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) IS:7098(Part I) with latest amendments of following size.;3 Core 16 sq.mm |
| 33 | Supply of 3 1/2 core armoured PVC/XLPE insulated PVC sheathed aluminium conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) IS:7098(Part I) with latest amendments of following size.;3 1/2 Core 150 sq.mm |
| 34 | Supply of 12 core x 1.5 sqmm Copper cable for Diesel Engine Pump. |
| 35 | Supplying and making cable end terminations with brass compression gland and copper lugs for folowing sizes of 3 Core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade complete as required.;(9) 3 x 70 Sq. mm. |
| 36 | Supplying and making cable end terminations with brass compression gland and copper lugs for folowing sizes of 3 Core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade complete as required.;(5) 3 x 16 Sq. mm. |
| 37 | Supplying and making cable end terminations with brass compression gland and copper lugs for folowing sizes of 3 Core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade complete as required.;(12) 3 x 150 Sq. mm. |
| 38 | Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size exceeding 25 sq.mm but not exceeding 120 sq.mm in the existing masonry open duct etc. complete as required |
| 39 | Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size exceeding 120 sq.mm but not exceeding 400 sq.mm on surface etc. complete as required |
| 40 | Core Cutting |
| 41 | Filling core cut gap with Concrete sealant. |
| 42 | Refilling and reinstallation of ABC 4 kg type fire extinguishers at site - 1st Year. |
| 43 | Refilling and reinstallation of ABC 4 kg type fire extinguishers at site - 2nd Year. |
| 44 | Refilling and reinstallation of ABC 4 kg type fire extinguishers at site - 3rd Year. |
| 45 | Refilling and reinstallation of CO2 type 4.5 kgs fire extinguishers at site - 1st Year. |
| 46 | Refilling and reinstallation of CO2 type 4.5 kgs fire extinguishers at site - 2nd Year. |
| 47 | Refilling and reinstallation of CO2 type 4.5 kgs fire extinguishers at site - 3rd Year. |
| 48 | Replacement of Spares for Fire Extinguisher if required during AMC period. Discharge hose pipe for ABC 4kg. |
| 49 | Replacement of Spares for Fire Extinguisher if required during AMC period. CO2 Band horn 4.5kg. |
| 50 | Replacement of Spares for Fire Extinguisher if required during AMC period. Syphon for ABC 4kg. |
| 51 | Replacement of Fire Alarm Panel Batteries (12V Sealed Lead Acid) at the end of 3rd Year or if required during the AMC Period |
| 52 | Annual Comprehensive Maintenance for Fire Alarm system as follows:1) Quarterly preventive maintenance of manual call points and Hooters. 2) Six Monthly preventive maintenance of Fire Alarm Panel including cleaning of the panel, tightening of the wires, and checking the battery voltage (Must also provide a copy of the history log). 2nd year. |
| 53 | Annual Comprehensive Maintenance for Fire Alarm system as follows:1) Quarterly preventive maintenance of manual call points and Hooters. 2) Six Monthly preventive maintenance of Fire Alarm Panel including cleaning of the panel, tightening of the wires, and checking the battery voltage (Must also provide a copy of the history log). 3rd year. |
| 54 | Earthing with GI earth plate 600 mm x 600 mm x 6 mm thick including accessories and providing masonry enclosure with CI/RCC cover having locking/Lifting arrangement and watering pipe etc. (but without charcoal or coke and salt) as required as per the Earthing Drawing provided by the Engineer-Incharge.The scope of work includes the following: a) Excavation of pit of size 1.0x1.0x 3.0 mtrs(min) and disposal of excavated soil. c)Watering GI pipe 20mm Class B with funnel as per specs. d) Charcoal/salt as per specs ( paid seperately). e) Refilling the pit of size 1.0x1.0x 3.0 mtrs(min) with soft black agriculture soil of minimum resistivity i/c transportation. e)Masonary chamber with proper foundation cover plate and locking arrangement. f) Testing of earth value with earth megger and certifications of its value. Aluminium tag with embossed earthing value to be attached to the pipe.g)watering arrangement(plumbing will be paid seperately).;(a) In soily strata |
| 55 | Extra for using salt and charcoal for GI or copper plate earth electrode as required( 96 Kgs of Charcoal and 5 Kgs of Salt) |
| 56 | Supplying and laying 25 mm x 5 mm GI strip at 0.5 m below ground as strip earth electrode including soldering etc. as required |
| 57 | Brick work using common burnt building bricks in cement mortar 1:4 (1 cement : 4 coarse sand) with bricks of class designation 75 kgs/ cm2 (wire cut bricks);In foundation and plinth. |
| 58 | Providing, fixing, testing, and commissioning of 25 mm dia size of GI ERW C class pipe (conforming to IS-1239) for overhead sprinkler system including cutting, screwing, welding etc. and provided all fittings like Tees, elbows, reducers, unions, bends, flanges, rubber gaskets, hangers etc. with painting of one coat of primer and 2 or more coats of synthetic enamel paint of approved make / shade complete as per specification. |
| 59 | Supplying , Installing, Testing and Commissiong of S.S. branch pipe of 63 mm Ø fitted with 20 mm Ø detachable hexagonal nozzle. ISI mark. (MakeNewage/Safex/Safeguard ) |
| 60 | Supplying , Installing, Testing & Commissioning of addressable type multi sensor Smoke / Heat detector with base.( Make-System Sensor/Ravel/Agni ) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 16, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 29, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 7 daysSep 30, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender