Tender For Construction Of Additional Classroom At Na Dibang Higher School, Sadiya.
Tender Value
25 Lakhs
Estimated cost
Bid Submission
07 Oct 2026
9 days left
EMD
50000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Tinsukia → Assam
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Additional Classroom At Na Dibang Higher School, Sadiya.
BOQ
| Sl. No. | Item Description |
| 1 | civil work |
| 2 | 2.8Description of ItemEarth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50m |
| 3 | 2.25 a)Excavating, supplying and filling of local earth (including royalty by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20cm in trenches, plinth, sides of foundation etc. complete. |
| 4 | 4.1Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:4.1.51:3:6 (1 Cement: 3 coarse sand (zone-lI) derived from natural sources: 6 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 5 | 4.10 Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement: 2 coarse sand (zone-Ill) derived from naturall sources: 4 graded stone aggregate 12.5mmnominal size derived from natural sources) |
| 6 | 5.1Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement-All work up to plinth level:5.1.21:1.5:3 (1 cement: 1.5 coarse sand (zone-lI) derived from natural sources: 3 graded stone aggregate 20mm nominal size derived from natural sources) |
| 7 | 5.2Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcemenf5.2.21:1.5:3 (1 cement: 1.5 coarse sand(zone-I)derived from natural sources: 3 graded stone aggregate 20mm nominal size derived from natural sources) |
| 8 | 5.3Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-lIl) derived from natural sources: 3 graded stone aggregate 20mm nomínal size derived from natural sources) |
| 9 | 5.9Centering and shuttering including strutting, propping etc. and removal of form for5.9.1 Foundations, footings, bases of columns, etc. for mass concrete |
| 10 | 5.9.6 Columns, Pillars, Piers, Abutments, Posts and Struts |
| 11 | 5.9.21 Lintels, beams, plinth beams, girders, bressumers and cantilevers with water proof ply 12 mm thick |
| 12 | 11.2Analysis-1: Providing Brick on flat soling in foundation and under floor with bricks of class designation 7.5 including filling the joints with fine sand, with common burnt clay non modular bricks and laid to level and in panel after preparing the subgrade as directed including all labour and materials and if necessary dewatering, complete. |
| 13 | 6.1Brick work with common burnt clay F.P.S. (nonfoundation and plinth in:modular) bricks of class designation 7.5 in6.1.1 Cement mortar 1:4 (1 cement: 4 coarse sand) |
| 14 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V6.13.2 Cement mortar 1:4 (1 cement :4 coarse |
| 15 | 11.41Providing and laying vitrified floor tiles in different sizes (thickness to specified by the manufacturer) with water absorption less than 0.08%and conforming to IS: 15622, of approved make, in all colours and shades,laid on 20mm thick cement mortar 1:4 (1 cement:4 coarse sand),jointing with grey cement slurry @3.3 kg/ sam including grouting thejoints with white cement and matching pigments etc., complete.Size of Tile 600x600 mm |
| 16 | Cement plaster skirting up to 30 cm height, with cement mortar 1:3 (1 cement: 3 coarse sand), finished with a floating coat of neat cement.11.6.1 18 mm thick |
| 17 | 12mm cement plaster of mix:13.4.11:4 (1 cement: 4 coarse sand |
| 18 | 12.50 Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05%) total coated thickness with zinc coating120 grams per sqm as per IS: 277, in 240 mpa |
| 19 | 12.51 Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drillina/self tanninn screws comnlete •12.51.1 Ridges plain (500 - 600mm) |
| 20 | Providing and Fixing 15mm thick densified tegular edged eco friendly light weight calcium silicate false ceiling tiles of approved texture of size 595 x 595mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanised steel sections (galvanising @ 120 grams per sqm including both side consisting of main T' runner suitably spaced at joints to get required length and of size24x38 mm made from 0.33 mm thick (minimum) sheet, spaced1200mm centre to centre, and cross \\"T\\" of size 24x28 mm made out of 0.33 mm (Minimum) sheet, 1200mm long spaced between main'T' at 600mm centre to centre to form a grid of 1200x600 mm and secondary cross |
| 21 | 9.20 Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of 9.20.1 35mm thick including ISI marked Stainless Steel butt hinges |
| 22 | 13.41 Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade:13.41.1 New work (two or more coats) over and |
| 23 | 13.44 Finishing walls with water proofing cement paint of required shade:13.44.1 New work (Two or more coats applied @3.84 kg/10 sam) |
| 24 | Providing and fixing ISI marked aluminium butt hinges anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etc. complete:9.95.3 100x75x4 mm |
| 25 | 9.96 Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868), transparent or dyed to required colour or shade, with nuts and screws etc. comolete:9.96.1 300x16 mm |
| 26 | 9.97 providing n fixing marked, anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete:9.97.2 250x10 mm |
| 27 | 9.10 providing n fixing marked, anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete:9.100.2 100 mm |
| 28 | Analysis -2: Providing, fitting and fixing anodised aluminium windows and ventilators of standard sections of approved brand joints mitred and welded (manufactured to relevant IS specifications) fitted with 6mm x 3.15mm lugs 100mm long embedded in CC blocks 150mm x |
| 29 | 5.22ASteel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level.5.22A.6 Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 30 | 10.2Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.50mm dia MS |
| 31 | 10.15Providing and fixing M.S. Tubular frames for doors, windows, ventilators and cupboard with rectangular/L-Type sections, made of 1.60 mm thick M.S. Sheet, joints mitred, welded and grinded finish, with profiles of required size, including fixing of necessary butt hinges and screws and applying a priming coat of approved10.5.1 Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement: 3 coarse sand : 6 graded stone aggregate 20mm nominal size)[email protected] Kg/M |
| 32 | 9.48 Providing and fixing M.S. grills of required pattern in frames of windowsetc. with M.S. flats, square or round bars etc. including priming coatwith approved steel primer all complete.9.48.2 Fixed to openings /wooden frames with rawl plugs screws etc. |
| 33 | NSORSupply, Fitting and Fixing of 12 Nos LED Bulb, 12Nos Ceiling Fan, including all necessary materials/fittings like wire, switch, socket, MCB, Casing Caping, Gl Earthing etc. as directed by concerned authority. |
| 34 | NSORSupplying, fitting and fixing of customized wooden/steel Desks & Benches at newly constructed classroom as directed by the concerned authority |
| 35 | NSORSupplying, fitting and fixing of Granite Sign Board as directed by the concerned Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 17, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 07, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 9 daysOct 07, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender