Tender For Construction Of Shop In Gomoh Road Under Jmada, Dhanbad.
Tender Value
1.20 Crore
Estimated cost
Bid Submission
08 Oct 2026
5 days left
EMD
2.40 Lakhs
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Dhanbad → Jharkhand
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Shop In Gomoh Road Under Jmada, Dhanbad.
BOQ
| Sl. No. | Item Description |
| 1 | Shopping ComplexEarth work in excavation in foundation trenches in hard soil (vide classification of soil item-B) and disposal of excavated earth as obtained to a distance up to 50m including all lifts, leveling, ramming the foundation trenches, removing roots of trees, shrubs all complete as per approved design, building specification and direction of E/I. |
| 2 | Provding coarse clean sand in filling in foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm thick with all lead and lifts including cost of all materials, labours, royalty and taxes all complete as per building specification and direction of E/I.. |
| 3 | providing designation 75B one brick flat soling joints filled with local sand including cost of watering, taxes royalty all complete as per building specification & direction of E/I. |
| 4 | Providing and laying laying in position cement concrete of specific grade excluding the cost of centering, shuttering- All work up to plinth level. 1:2:4(1cement :2 coarse sand (zone-III) :4 graded stone aggregate 20 mm nominal size) |
| 5 | Providing and laying laying in position specific grade of cement concrete of excluding the cost of centering, finishing and reinforcement - All work up to plinth level. 1:1.5:3(1cement :1.5 coarse sand (zone-III) :3 graded stone aggregate 20 mm nominal size) |
| 6 | Reinfoeced cement concrete work in walls( any thickness) including attached pilasters, buttresses, plinth and string cources, fillets , columns, pillars, piers, abutments, posts and struts etc above plinth level up to floor five level, excluding the cost ofcentering,shuttering, finishing and reinforcement with 1:1.5:3 (1cement :1.5 coarse sand (zone-III) :3 graded stone aggregate 20 mm nominal size) |
| 7 | Reinfoeced cement concrete work in beams suspended floors, roofs having slope up to 15 degree , landings, balconies, shelves,chhajja , lintels, bands, plain windows sills, stair cases and spiral stair caces above plith level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1cement :1.5 coarse sand (zone-III) :3 graded stone aggregate 20 mm nominal size) |
| 8 | Providing tor steel reinforcement of 10mm ,12mm,16mm dia bar as per approved design & drawing excluding carriage of M.s. rods (straight or in coils) to work site, cutting, bending & binding with annealed wire with cost of wire, removal of rust, placing the rods in position all complete as per building specification and direction of E/I. (5.5.4) 8 mm Dia 30% |
| 9 | (5.5.5) (a) 10 mm Dia 30% |
| 10 | (5.5.5) (b) 12 mm Dia 40% |
| 11 | Supplying all materials, labour & tools & providing centering & shuttering including striking propping etc and removal of form as per direction of E/IFoundation |
| 12 | Roof & chhajja |
| 13 | Lintel |
| 14 | Column |
| 15 | Providing designation 75 B brick work in C.M (1:6) in foundation and plinth approved quality of clean coarse sand of F.M 2 to 2.5 including providing 10mm thick mortar joints, costs of screening, materials, scaffolding, raking out joints to 15mm depth curing, taxes & royalty all complete as per building specification & direction of E/I. |
| 16 | Providing designation 75B brick work in C.M (1:6) in superstructure with approved quality of clean coarse sand of F.M 2 to 2.5 including providing 10mm thick mortar joints, costs of screening, materials, scaffolding, raking out joints to 15mm depth curing, taxes & royalty all complete as per building specification & direction of E/I. |
| 17 | Providing 12mm thick cement plaster (1:4) for inside &outside surface of quarter with clean coarse sand of F.M. 15 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I |
| 18 | Providing 6mm thick cement plaster (1:4) with clean coarse sand of F.M. 15 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I |
| 19 | Provrcting and laying 25rnm. thick kotah stone slab flooring of approved size, iexture and colour over 19mm. thick base of lime morter (1 1 :1) (lime putty:surkhi:coarse sand) laid over and jolntedwith grey cement slurry mixed with pigment to match the shade of slab including rubbing and pollshrng to granolithic finish with approvedquality of carborandurn stone including cost of curing, taxes and royaliy all complete as per building specificationand direction of E/I. |
| 20 | Provrcting and laying 25rnm. thick kotah stone tiles in skirting of approved size, iexture and colour over 12 mm. thick cement morter (1:3) (lime putty:surkhi:coarse sand) laid over and jolntedwith grey cement slurry mixed with pigment to match the shade of slab including rubbing and pollshrng to granolithic finish with approvedquality of carborandurn stone including cost of curing, taxes and royaliy all complete as per building specificationand direction of E/I. |
| 21 | Providing & laying ceramic glazed floor tiles of size 300 X 300 mm of 1st quality conf. to IS: 15622 of approved make in colours do --- do --- e/i. |
| 22 | Providing & layng 6 mm precast white glazed tiles in walls over 12 mm cement mortar (1:3) jointed with grey cement slurry slush pointed with whte cement including rubbing polishing with cost of curing taxes and royalty all complete as per building specification & direction of E/I. |
| 23 | Providing and fixing fan hooks of 16mm.dia M.S. bar 1meter long ,bent to required size and shape , placed in position and fixed in R.C.C .Salb/ beam at the time of casting all complete as per building specification and direction of E\I. (where materials is not supplied by the deptt.) |
| 24 | Providing 12mm. water proof cement plaster (1:3) with clean coarse sand of F.M. with 5% cico or any other, approved water proofing compound scaffolding, taxes and royalty all complete as per building specification and direction of E/I. |
| 25 | Providing and fixing double glazed hermetically sealed glazing in aluminium windows, ventilators and partitions with 6 mm thick clear flot glass both side, having 12 mm air gap, including providing EPDM gasket, do --- do --- all complete as per architectural drawings and the directions of Engineer-in-charge |
| 26 | Supplying, fitting and fixing collapsible gate of approved size & make properly fabricated with verticaldouble channel 20x10x2 mm at 100 mm centre to centre with MS flat diagonal 20x3mm with top & bottom rail of T iron 40x40x6 mm with 38 mm dia steel pulley complete with bolts & nuts etc all complete and taxes as per building specification and direction of E/I. |
| 27 | Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters |
| 28 | Providing two coats of synthetic enamel paint of approved shade and make over a coat of red lead paint over steel surface including cleaning the surface thoroughly , scaffolding and taxes all complete as per building specification and direction of E/I. |
| 29 | Providing two coats of snowcem of approved shade and make over new surface including washing cleaning and preparing the walls , scaffolding,curing and taxes all completeas per building specification and direction of E/I. |
| 30 | Providing and fixing stainless steel ( Grade 304) railing made of Hollo tubes, channels, plates etc., including welding, grinding, buffing, polishingand making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railingwith necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-incharge, (for payment purpose only weight of stainless steel membersshall be considered excluding fixing accessories such as nuts, bolts, |
| 31 | Making plinth protection 50mm thick of cement concrete (1:3:6) over 75 mm thick bed of brick blast 4mm nominal size, well ramed & consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth. |
| 32 | Providing 250 mm brick drain in C.M (1:6) with avr. 150 mm clear deptjh and 125 mm apron do --- do --- |
| 33 | Supplying all labous tools & equipements & disposal of garbage by tractor accumulated near compound wall including loading unloading & carraige up to 5 Kms lead as per direction of E/I. |
| 34 | Providing all labour tools and equipments and carriage of different materials from different place to work sites and back inlcuding providing mechanicals mean with all lead & lift all complete. Bricks (Lead = 1K + 7 P) 8 Km |
| 35 | Sand (Lead = 1 K + 29 P) 30 Km |
| 36 | Stone chips (Lead = 30 Km) |
| 37 | Cement (lead = 3 Km) |
| 38 | Steel ( Lead -3 Km) |
| 39 | Compound WallEarth work in excavation in foundation trenches in hard soil (vide classification of soil item-B) and disposal of excavated earth as obtained to a distance up to 50m including all lifts, leveling, ramming the foundation trenches, removing roots of trees, shrubs all complete as per approved design, building specification. |
| 40 | Provding coarse clean sand in filling in foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm thick with all lead and lifts including cost of all materials, labours, royalty and taxes all complete as per building specification |
| 41 | Providing designation 75B one brick flat soling joints filled with local sand including cost of watering, taxes royalty all complete as per building specification. |
| 42 | Providing and laying laying in position cement concrete of specific grade excluding the cost of centering, shuttering- All work up to plinth level.1:2:4(1cement :2 coarse sand (zone-III) :4 graded stone aggregate 20 mm nominal size) |
| 43 | Providing and laying laying in position specific grade of Reinfoeced cement concrete workof excluding the cost of centering, finishing and reinforcement -shuttering- All work up to plinth level.1:1.5:.3(1cement :1.5 coarse sand (zone-III) :3 graded stone aggregate 20 mm nominal size) |
| 44 | Reinfoeced cement concrete work in beams suspended floors, roofs having slope up to 15 degree , landings, balconies, shelves,chhajja , lintels, bands, plain windows sills, stair cases and spiral stair caces above plith level up to floor five level, excluding the cost of centering,shuttering, finishing and reinforcement with 1:2:4 (1cement :1.5 coarse sand (zone-III) :3 graded stone aggregate 20 mm nominal size) |
| 45 | Providing tor steel reinforcement of 10mm ,12mm,16mm dia bar as per approved design & drawing excluding carriage of M.s. rods (straight or in coils) to work site, cutting, bending & binding with annealed wire with cost of wire, removal of rust, placing the rods in position all complete as per building specification and direction of E/I. (5.5.4) 8 mm Dia 30% |
| 46 | (5.5.5) (a) 10 mm Dia 30% |
| 47 | (5.5.5) (b) 12 mm Dia 40% |
| 48 | Providing designation 75B brick work in C.M (1:6) in foundation & plinth with approved quality of clean coarse sand of F.M 2 to 2.5 including providing 10mm thick mortar joints, costs of screening, materials, scaffolding, raking out joints to 15mm depth curing, taxes & royalty all complete as per building specification. |
| 49 | Providing designation 75B brick work in C.M (1:6) in super structure with approved quality of clean coarse sand of F.M 2 to 2.5 including providing 10mm thick mortar joints, costs of screening, materials, scaffolding, raking out joints to 15mm depth curing, taxes & royalty all complete as per building specification. |
| 50 | Supplying all materials, labour & tools & providing centering & shuttering including striking propping etc and removal of form as per direction of E/IFoundation |
| 51 | Lintal Bend |
| 52 | Column |
| 53 | Providing 12mm thick cement plaster (1:4) with clean coarse sand of F.M. 15 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I |
| 54 | Providing two coats of snowcem of approved shade and make over new surface including washing cleaning and preparing the walls , scaffolding,curing and taxes all completeas per building specification and direction of E/I. |
| 55 | Earth work in back filling in foundation trenches, plinth & courtyard in layers not exceeding 150mm thick well watered, rammed, fully compacted & fine dressed with earth obtained from excavation of foundation trenches within a lead of 50m & lift of 1.5m all complete as per building specification and direction of E/I. |
| 56 | Providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia 10 metre openable length ( total length 90 m), having 50 nos rounds per 6 metre length, upto 3 m height of wall with existing angle iron 'Y' shaped placed 2.4m or 3.00 m apart and with 9 horizontal R.B.T. reinforced barbed wire, stud tied with G.I. staples and G.I. clips to retain horizontal, including necessary bolts or G.I. barbed wire tied to angle iron, all complete as per direction of Engineer-in-charge, with reinforced barbed tape(R.B.T.) / Spring core (2.5mm thick) wire of high tensile strength of 165 kg/ sq.mmwith tape (0.52 mm thick) and weight 43.478 gm/ metre |
| 57 | Supplying M.S. angle of size 65X65X6mm grade -A of approved make as per specification & direcion of E/I. |
| 58 | Drilling 6mm dia holes in M.S. angle iron for fixing of staples etc as per building specifications and direction of E/I. |
| 59 | Labour for cuting M.S. angle iron post to required length one end splitted as fishtailed in a length of 150 mm complete as per building specifications and direction of E/I. |
| 60 | Providing two coats of synthetic enamel paint of approved shade and make over a coat of red lead paint over steel surface including cleaning the surface thoroughly , scaffolding and taxes all complete as per building specification and direction of E/I. |
| 61 | Providing all labour tools and equipments and carriage of different materials from different place to work sites and back inlcuding providing mechanicals mean with all lead & lift all complete. Briks (Lead = 1 K + 7 P) 8 Km |
| 62 | Sand (Lead = 1 K + 29 P) 30 Km |
| 63 | Stone chips (Lead = 1 K + 29 P) 30 Km |
| 64 | Cement (Lead = 3 Km) |
| 65 | Steel ( Lead -3 Km) |
| 66 | Electrification Of Shopping ComplexPoint wiring in PVC conduite with piano type switch wiring for light, point,fan point,exhaust fan point, call bell point with 1.5 sq mm F.R. PVC insulated copper conductor single core in surface recessed PVC conduite,piano type swich phenolic laminated sheet withsuitable size PVC/MS box etc as required. as per specification.Group A |
| 67 | Point wiring in PVC conduite with piano type switch wiring for light, point,fan point,exhaust fan point, call bell point with 1.5 sq mm F.R. PVC insulated copper conductor single core in surface recessed PVC conduite,piano type swich phenolic laminated sheet withsuitable size PVC/MS box etc as required. as per specification.Group B |
| 68 | Point wiring in PVC conduite with piano type switch wiring for light, point,fan point,exhaust fan point, call bell point with 1.5 sq mm F.R. PVC insulated copper conductor single core in surface recessed PVC conduite,piano type swich phenolic laminated sheet withsuitable size PVC/MS box etc as required. as per specification.Group C |
| 69 | Power plug wiring in PVC conduit (21X4 sq mm)wiring for light power plug with 2X4sq mm FRPVCinsulated copper conductor single core cable in surface / recessed PVC condut, along with 1 noo 4 sq mm FRPVC insulated copper conductor single core cable for loop earthing etc as required. |
| 70 | Wiring for circuite submain wiring along with earth wire with the following sizes of FR PVC insulated copper conductor single core cable in surface recessed PVC conduit as required.2x1.5 Sq mm+1x1.5 sq mm earth wire |
| 71 | 2x2.5 Sq mm+1x2.5 sq mm earth wire |
| 72 | 4x6 Sq mm+1x6.00 sq mm earth wire |
| 73 | Supplying & fixing suitable size GI box with modular plate insulated copper conductor , single core cablein suface / recessed pvc conduite as required. 12 Moudule |
| 74 | Supplying & fixing suitable size GI box with modular plate insulated copper conductor , single core cablein suface / recessed pvc conduite as required. 06 Moudule |
| 75 | Supplying & fixing following modular type switch /socket on the switch box / cover including connection etc as required.5/6 amps one way switch |
| 76 | 3 pin 5/6 amps socket |
| 77 | 3 pin 15/16 amps switch |
| 78 | 3 pin 15/16 amps socket |
| 79 | S/F Stepped type electronic fan regulator |
| 80 | Supplying fitting & fixing 2 pin 5 amp ceiling rose on the existing junction box wooden block including connection etc as required. |
| 81 | Supplying fitting & fixing batten/angle holder including connection etc as required. |
| 82 | Supplying & fixing following way single pole and neutral sheet steel MCB distribution board 240 volts on surface /reces complete with tinned copper bus bar , neutral bus bar, earth bar inteconnection , powred panneled including earthing etc as required 2.8.1 -2 way single door |
| 83 | Supplying & fixing following way single pole and neutral sheet steel MCB distribution board 240 volts on surface /reces complete with tinned copper bus bar , neutral bus bar, earth bar inteconnection , powred panneled including earthing etc as required 2.8.2 -4 way single door |
| 84 | Supplying fitting 6 amp to 32 amps rating, 240 volts,10 KA\\"B\\" curve , miniature circuit beaker for inductive load of following poles in the existing MCB complete with connection ,esting and commissioning etc as required. 2.11.1) 6/32 amps single pole \\"B\\" series |
| 85 | Supplying fitting & fixing 63 amp TPN main switch disconnector fuse unit pannel mounted / cubical type with ISI marked HRC fuses.button single holder as per direction. |
| 86 | Supplying fitting and fixing exhoust fan of size12\\" approved make including providing electric connection as per specification & direction of E/I. |
| 87 | Supplying & fixing following capacity 2pole/4pole on/off -load change over switches with side handle operation in sheet enclosure in existing metal board including drilling holes in metal board , making connection , earthing the body etc as required. 100 amp 4 pole |
| 88 | Supplying installation and commissioning of following size ceiling fan 3 blades confirming to I 374:2019 wiring with down rods of standard length with 1.5FR PVC insulated copper wire suitable for 230 V50Hz single phase supply etc coimplete required.1200mm(48\\") ceiling fan |
| 89 | Supplying & fixing LED mirror light of 10 watt of approved make as per direction of WE/I. |
| 90 | Supplying fitting & installation of following rating surface mounted LED tube light fitting suitable for 230V 50Hz single phase supply etc complete as required.20/22 W LED Tube light |
| 91 | Supplying fitting & installation of following rating LED post top lamp made in die cast alumunium housing with decorative clear / opal acrylic diffuser on existing pipe including connection with 1.5 sq mm copper conductor etc all complete as required.40/45W LED Post top lamp clear |
| 92 | Water Supply & Sanitary Installation Of Shopping ComplexK ) Supplying G.I. pipe ( Tata or equivalent make as per IS-1239 (partr-01) /2004 ISI marked /Medium quality.15mm dia |
| 93 | 20mm dia |
| 94 | 25mm dia |
| 95 | 40mm dia |
| 96 | Supplying labour and tools for fixing G.I. pipes with Red lead and yarn of following nominal bore with screwed and socketted joints on wall, ceiling and floor including supplying and fitting of wall hooks or pipe clamps, wooden plugs, cutting pipes to size and threading ends if required etc. all complete as per specification and direction of Engineer-in-Charge.15mm dia |
| 97 | 20mm dia |
| 98 | 25mm dia |
| 99 | 40mm dia |
| 100 | Laying of G.I. pipes of approved make in trenches with red lead and yarn with socket and screw joints and cutting pipes to sizes and threading ends where necessary etc. all complete as per specification and direction or Engineer-in-Charge.25mm dia |
| 101 | 40mm dia |
| 102 | Supplying polythine water storage tank of ISI mark with cover and suitable locking system in double layer confirming to IS: 12709.1996 with latest revision. |
| 103 | Supplying and fitting and fixing G.I. fittings of approved make ( Conforming to I.S. 1879 ) as per specification and direction of E/I.15 mm dia G.I.Elbow |
| 104 | 20 mm dia G.I.Elbow |
| 105 | 25 mm dia G.I.Elbow |
| 106 | 40 mm dia G.I.Elbow |
| 107 | 15 mm GI Union |
| 108 | 20 mm GI Union |
| 109 | 25 mm GI Union |
| 110 | 40 mm GI Union |
| 111 | 25 mmX20 mm Dia GI Reducing Socket |
| 112 | 20 mmX15 mm Dia GI Reducing Socket |
| 113 | 40 mmX25 mm Dia GI Reducing Socket |
| 114 | 20 mm Dia GI Nipple . |
| 115 | 15 mm Dia GI Nipple . |
| 116 | 40 mm Dia GI Nipple . |
| 117 | Providing and fixing gun metal full way valve of approved quality as per specification and direction of E/I.25 mm dia and weight not less than 500gms |
| 118 | 15 mm dia and weight not less than 300gms |
| 119 | 40mm dia and weight not less than 1 Kgs |
| 120 | Providing and fixing C.P . brass bib cock of approved quality conforming to IS 8931 15 mm dia nominal Bore |
| 121 | Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931 18.52.1 15 mm nominal bore |
| 122 | Supplying, fitting and fixing 40mm high vitreous white glazed earthen E.W.C. with ‘p’ trap of parry hindustan or any other approved I.S.S. make including supplying and fixing 15 litres C.I. mosquito proof low down flushing cistern of approved make with complete fittings with C.I.handle and R.S. or bracket with telescopic flush pipewith brass coupling and plumbers joints spindle stop cock of approved quality weight not less than 450grams 15mm P.V.C. alkathenepipe 45cm. long with brass coupling at both ends and white/black plastic solid state seal and lead of commander/cuckoo or other I.S.S.make with hinges or screws etc. painting pipe and cistern etc. with 2 coats of approved paint over a coat of red oxide priming, all com plete as per specification & direction of E/I. (i) With S' trap(b) 10 lit. low level PVC Cistem |
| 123 | Supplying fitting and fixing vitreous white glazed earthen ware wash hand basin of parry or Hindustan or any other I.S.S. approved make supported on painted C.I. or R.S. brackets 32mm C.I.brass waste, 15 mm dia C.I. body brass spindle stop cock of approved quality of weight not less than 350grams, 32mm P.V.C. waste pipe 750mm long with brass coupling at one end and making plumber joints etc. all complete as per specification & direction of E/I. |
| 124 | Supplying, fitting and fixing vitreous white glazed earthen ware indian squating type 600x350mm urinal plate of parry, Hindustan or any other I.S.S. approved make with internal flushing rim, 100mm white glazed earthen ware channel about 1m. long 5 litre capacity C.I. automatic flushing cistern of reliance or any other approved make with fittings R.S. or C.I. brackets 15mm and 45 cm long PVC / Alkathene pipe standard G.I. flush pipe for backand front with spreader fittings and brass coupling etc. 15 mm C.I. Body 'brass spindle stop cock weight not less than 450 grams. all complete including painting of exposed parts with 2 coats of approved paint over a coat of red oxide primer and cutting the wall and floor and making good the same as per specification & direction of E/I. (a) 600 mm x 350 mm size (large) |
| 125 | Supplying, fitting and fixing the following items complete with all materials as per specification and direction of E/I. a ) Glass selves with C.P. brass rail.600x125 mm Glass selve complete. |
| 126 | (b)Mirrors of 6mm thick plate glass bevelled edge mirror including C.P. brass revolving fittings 3mm ply wood board and C.P. hinges to fix with mirror.ii) 450x300 mm |
| 127 | (c) (i) C.P. brass towel rail 20mm x600mm with bracket container |
| 128 | ii) C.P. brass soap dish container medium quality with screw and hinges etc |
| 129 | Supplying materials and labours for constructing inspection chamber of designation class 75B bricks size 750mm deep, 600x450mm internal dimension having 250mm wall thickness in cement mortar (1:6) including 12mm cement plaster (1:4) with punning on inside and cement plaster (1:6) with 600x475mm G.I. Cover with frame (weight not less than 36kg.) alongwith earth work in excavation and 80 mm thick P.C.C. (1:3:6) in oundation and refilling all complete as per specification & direction of E/I. |
| 130 | Supplying fitting and fixing H.C.I. pipes with ear of approved make confirming to I.S.I. 1729 including supplying nails and bobins short pieces, cutting loose collars,lead and yarn for making lead caulked joints, cutting pipes to size including earth work or scaffoldingwhere necessary etc. all complete as per specification and direction of E/I.100mm Dia |
| 131 | Supplying fitting and fixing H.C.I. pipes with ear of approved make confirming to I.S.I. 1729 including supplying nails and bobins short pieces, cutting loose collars,lead and yarn for making lead caulked joints, cutting pipes to size including earth work or scaffoldingwhere necessary etc. all complete as per specification and direction of E/I.50mm DiaFor Urinal |
| 132 | Supplying and fixing H.C.I. fittings of approved make confirming to I.S.S.1729 including supplying nails and bobines lead and yarn from I.S.S.1729 including supplying nails and bobines lead and yarn from making lead caulked joints including earth work or providing scaffolding as the case may be all complete as per specification and making lead caulked joints including earth work or providing scaffolding as the case may be all complete as per specification and direction of E/I.G) Bend with door and ear100 mm dia ( wt 6.50kgs app) |
| 133 | 50 mm dia ( wt 4.00kgs app) |
| 134 | B) 100 mm heal rest bend ( wt 5.5 kgs app ) |
| 135 | Supplying and fixing H.C.I. fittings of approved make confirming to I.S.S.1729 including supplying nails and bobines lead and yarn from I.S.S.1729 including supplying nails and bobines lead and yarn from making lead caulked joints including earth work or providing scaffolding as the case may be all complete as per specification and making lead caulked joints including earth work or providing scaffolding as the case may be all complete as per specification and direction of E/I.K ) Norton patent HCI Coweli) 100 mm dia ( Wt 3.25Kgs app. |
| 136 | Earth work in excavation for laying of different types and sizes of R.C.C. spun pipes with disposal of excavated earth within initial lead and lift as per specification and direction of E/I. |
| 137 | Supplying NP 2 R.C.C. Hume pipe with collaras per I.S.S. 458-1971 as per specification & direction of E/I. 250mm Dia |
| 138 | Labour for laying, fitting and fixing NP2 R.C.C. spun pipe with collars and joints properly filled to make them leak, proof including providing sight rails, bonning rod, night guard, Red light and barrier etc. all complete as per specification and direction of E/I. 3.3.6.3)250 mm dia R.C.C. spun pipe up to 3.00 mtr depth of invert below G.L. From inspection chamber to Septic Tank. |
| 139 | Earthwork in back filling the trench after laying different types andsizes of R.C.C. spun pipes with earth removed during excavation within initiallead and lift as per specification and direction of E/I. 80% of excavation. |
| 140 | Construction of 9m3 capacity brick masonary septic tank as per design, drawing & specification. ( Details attached) |
| 141 | Laying of Paver In The Campus Of Shopping ComplexEarthwork in excavation in foundation trenches in ordinary soil (vide classification of soil item-A) and disposal of excavated earth as obtained to a distance upto 50 M. including all lifts, levelling, ramming the foudation trenches, removing roots of trees, shrubs all complete as per approved design, building specification and direction of E/l. |
| 142 | Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge. 80 mm thick C.C. paver block of M-30 grade with approved color design and pattern. 60mm thick cement concrete paver block of M-35 grade with approved colour, design & pattern |
| 143 | Providing and laying laying in position cement concrete of specific grade excluding the cost of centering, shuttering- All work up to plinth level.1:2:4(1cement :2 coarse sand (zone-III) :4 graded stone aggregate 20 mm nominal size) |
| 144 | Carriage of materials: Cement -Lead-3 Kms |
| 145 | Carriage of materials: Sand (lead = 1 K + 29 P) 30 Km |
| 146 | Carriage of materials: Stone chips (lead = 1 K + 29 P) 30 Km |
| 147 | Add for Photography & sighn board |
| 148 | Goods & Services Tax (G.S.T.) - 18% |
| 149 | Labour Cess - 1% Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 17, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 08, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysOct 10, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender