Tender For Construction Of Underground Storage Tank Of 50000 Liters Capacity District Kangra (H.P.) (Sh: Construction Of Reinforcement Cement Concrete Storage Tank Of 50000 Litres Capacity At Civil Hospital Kangra. (Deposit Work). Estimated Cost- 478
Tender Value
4.78 Lakhs
Estimated cost
Bid Submission
26 Sep 2026
3 days left
EMD
9570
Bank guarantee accepted
Document Fee
350
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kangra → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Underground Storage Tank Of 50000 Liters Capacity District Kangra (H.P.) (Sh: Construction Of Reinforcement Cement Concrete Storage Tank Of 50000 Litres Capacity At Civil Hospital Kangra. (Deposit Work). Estimated Cost- 478329/- Earnest Money- 9570/- Time Limit- Three Months
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in foundation trenches etc.in earth work in all kinds of soil such as pick work,jumper work,blasting in soft and hard rock and chiselling work including saturated soil slushy soil and under floor upto all depth and stacking the excavated soil not more than 3 metre clear from the edge of excavation and then returning the stacked soil in 15 centimetre (Fifteen centimetre)layer when required into plinth sides of foundation etc.consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated earth as directed by the Engineer-in-charge. |
| 2 | Providing and laying cement concrete 1:3:6 (One cement is to three sand is to six graded stone aggregate 40 milimetre nominal size) and curing complete excluding the cost of form work in foundation and plinth within all leads and lifts as per the direction of Engineer-in-charge. |
| 3 | Providing and laying cement concrete 1:1½ :3 (One cement is to one and half sand is to three graded stone aggregate 20 milimetre nominal size) and curing complete excluding the cost of form work andd reinforcement for reinforced concrete work in:- |
| 4 | Foundation,footings bases of column and the like mass concrete within all leads and lifts as per the direction of Engineer-in-charge. |
| 5 | Walls (any thickness) butt not less then 0.10 metre thickness) attached pillasters, buttresses, plinth and string courses etc. from top of foundation up to floor two level with in all leads and lifts as per the direction of Engineer-in-charge. |
| 6 | Suspended floors,roofs landing shelves and their supports balconies beams,girders and cantilevers upto floor two level within all leads and lifts as per the direction of Engineer-in-charge. |
| 7 | Arches exceeding six metre span within all leads and lifts as per the direction Engineer-in-charge. |
| 8 | Providing form work with steel plates 3.15 milimetre thick welded with angle iron in frame 30x30x5 milimetre so as to give a fair finish including centring,shuttering,strutting and propping etc.with wooden battens ballies,height of propping and centring below supporting floor two ceiling not exceeding 4 metre and removal of the same for in-situ-reinforced concrete and plain concrete work in:- |
| 9 | Vertical surfaces such as walls(any thickness)partitions walls and the like including attached pillasters,buttreses plinth string courses and the like within all leads and lifts as per the direction of Engineer-in-charge. |
| 10 | Providing form work of ordinary timber planking so as to give a rough finish including centering,shuttering,strutting and propping etc.height of propping and centering below supporting floor to ceiling not exceeding 4 metrre and removal of the same for in-situ-reinforced concrete and plain concrete work in:- |
| 11 | Arches exceeding six metre span within all leads and lifts as per the direction Engineer-in-charge. |
| 12 | Providing in reinforcement cement concrete work smooth finishing of the exposed surface with cement mortar 1:3 (1 cement 3 sand) within all leads and lifts as per the direction of Engineer-in-charge. |
| 13 | Providing and laying mild steel/tor steel reinforcement for reinforced cement concrete work including bending binding and placing in position complete upto floor two level within all leads and lifts as per the direction of Engineer-in-charge. |
| 14 | Steel work welded in built up sections,trusses and framed work including cutting,hoisting and fixing in position and applying a priming coat of red lead paint in gratings,framed guard bars,ladders,railing,brackets and similar type of work within all leads and lifts as per the direction of Engineer-in-charge. |
| 15 | Laying, jointing and testing in trenches galvanised iron pipe of following dia for outlets pipe scour pipe and over flow pipes etc. within all leads and lifts as per the direction of Engineer-in-charge. |
| 16 | 100 milimetre dia. |
| 17 | Providing and fixing of cast iron sluice valve of Kirloskar/Kartar/leader/Bir make of following diameter with hand wheel as per IS:14846-2000 (Class PN-1.0) including brass spindal as per 2906-1984 complete with nuts bolts and rubber insertion etc.complete in all respect with in all lead and lifts as per satisfaction of Engineer-in-charge. |
| 18 | 100 milimetre dia. |
| 19 | Construction of chamber for sluice valve with C.I.surfaces bex 100 milimetre top dia 160 milimetre bottom diametre and 180 milimetre deep with chained lid and reinforcement cement concrete top slab 1:2:4 (One cement is to two sand is to four graded stone aggregate 20 milimetre nominal size) 120 milimetre thick foundation bes concrete 1:5:10 (One cement is to five sand is to ten graded stone aggregate 40 milimetre nominal size) and in side cement plastering 1:3 (One cement is to three sand) finished with a floating coat of neat cement including curing complete with 300 milimetre thick wall of squared rubble masonry with hard stone of approved quality in cement mortar 1:6 (One cement is to six sand) as per the direction of Engineer-in-charge. within all leads and lifts size 600x600x750 with 150 milimetre thick wall of reinforcement cement concrete 1:2:4. |
| 20 | Providing and fixing SFRC man hole cover, 560 milimetre dia with frame. The weight of cover and frame should not less than 100 Killogramme within all leads and lifts as per the direction of Engineer-in-charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 16, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 26, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysSep 26, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender