Tender For Providing Name Board, Die Cast Letter And Marking Arrangements For Pre-Fabricated Workshop Building For Centres Of Excellence In Government Polytechnic College At Nagapadi In Thiruvannamalai District.
Tender Value
4 Lakhs
Estimated cost
Bid Submission
05 Oct 2026
17 days left
EMD
4000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Tiruvannamalai → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Providing Name Board, Die Cast Letter And Marking Arrangements For Pre-Fabricated Workshop Building For Centres Of Excellence In Government Polytechnic College At Nagapadi In Thiruvannamalai District.
BOQ
| Sl. No. | Item Description |
| 1 | Supplying and Fixing of Aluminium Die Cast Letters of following size of approved colour. The colour treatment process is achieved with MRF colour coat and then the processed coloured layer is set into the kiln for the heat treatment process for the following sizes. The rate is inclusive of all charges such as conveyance of letters, fixing the letters to the wall tiles (or) granite etc., and with necessary scaffolding charges and redoing the wall to the original condition etc, complete as directed by the departmental officers. |
| 2 | Aluminium Die Cast Letters of size 12\\" |
| 3 | Aluminium Die Cast Letters of size 9\\" |
| 4 | Aluminium Die Cast Letters of size 10\\" |
| 5 | Emblem - 24\\" |
| 6 | MS LOGO |
| 7 | Providing two legged scaffolding using 15cm diameter blue-gum posts or casuarina posts of best quality bamboo posts of 4m over all length (3m+0.5m projection+0.5m into the ground) the distance between the two rows being 1.25m and the spacing of posts being 2m in both the rows with two horizontal posts with 0.5m overlap on either side and braces at 2m c/c including longitudinal and transverse middle braces to step up and providing a platform with country wood planks of 40mm thick and 1m width etc., in a complete form using coir and nails 1m run. |
| 8 | Supplying and fixing of Name board for the building using 3mm thick foam sheet over which blue colour over which acrylic sticker has to be pasted. The details of the name board such as texts, font shapes, styles and sizes as provided by the departmental officers. The rate inclusive of material charges, labour charges, conveyance, adhersives and other charges etc., |
| 9 | Supplying and fixing of Aluminium ladder of 7m height with necessary fittings etc., complete as directed by the departmental officers. |
| 10 | Fabricating, Supplying and fixing in position of Aluminium anodised natural colour matt finish 1/3rd fixed glazing 2/3rd prelaminated board of Aluminium partition of size 2.70m x 2.10m. The outer frames Outer frame:63.50 x 38 x 3mm @ 1.72 kg/m, Centre mullions:63.50 x 38 x 3mm@ 1.55 kg/m, Alu.Clips:17.27 x 17.15 x 1.50mm @ 0.175kg/mg/m for intermediate vertical mullion 90cm c/c. Horizontal mullion at 1.00m 2.10m covered with 4 mm thick plain glass with neccessary aluminium clips of size 17.27 x 17.15 x 1.50mm @ 0.176kg/m and with required rubber beading etc., including necessary dismantling holes in RCC Column, masonry wherever in necessary with power drills to the extent required and made good the damaged portion in good condition after fixing as directed by the departmental officers. All the aluminium sections should be anodised not less than 15 microns as ISI specification1868/1962 / and should be gotapproved by Executive Engineer before use. |
| 11 | SUB TOTAL |
| 12 | GST @ 18 % Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 17, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 05, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 17 daysOct 05, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 17 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender