Tender For Construction Of Kalairangam At Achankulam Village In Salwarpatti Panchayat.
Tender Value
10 Lakhs
Estimated cost
Bid Submission
05 Oct 2026
4 days left
EMD
10000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Virudhunagar → Tamil Nadu
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Kalairangam At Achankulam Village In Salwarpatti Panchayat.
BOQ
| Sl. No. | Item Description |
| 1 | Construction of Kalairangam at Achankulam village in Salwarpatti Panchayat. |
| 2 | Earth work excavating and deposition on bank with intial lead and lift all clauses of soil such as hard stiff clay soil , as per SS 20 B for foundation etc., |
| 3 | Collection and supply of Well gravel from appd quarry including cost and conveyance of all materials to site including all labour charges for filling etc.complete, |
| 4 | Cement concrete in 1:4:8 mix using 40mm ISS HBG metal including all Cost and conveyance of labour charges etc.,Complete., |
| 5 | Brick work in CM 1:5 mix using country bricks including all cost and conveyance of labour charges etc., |
| 6 | Supplying and fabrication of steel for RCC works including all cost and covneyacne of labour charges etc |
| 7 | RCC 1:1/2:3 mix using 20 mm metal including all cost and conveyacne of labour charges etc., |
| 8 | Cetering charges for RCC works including all cost and conveyance of labour charges etc., |
| 9 | Supplying and applying of two coats of putty of 3mm thick over the exposed RCC surface of ceiling including finishing the joints smoothy with grinding machine and the surface shall be thoroughly cleaned out of dust and scrubbing. The Surface shall then be allowed to dry for atleast 48 hours. It shall then be sand papered (waterproof abrasive sheet) to give a smooth and even surface. Any unevenness shall be made good by applying 1st coat of putty mixed with water on the entire surface including filling up the undulations and applying 2nd coat of putty after 6 hours of 1st coat of putty and then sand papering (waterproof abrasive sheet) the same after it is dry and finishing the surface smoothly, etc., complete complying with standard specifications and as directed by the Departmental Officers. [ The rates are inclusive of hire charges for grinding machine with wheel, cost of sand paper (waterproof abrasive sheet), cost of putty blade, labour charges for grinding the joints and sand papering, two coat of putty, scrapping the putty area to level the surface smooth, etc., complete]. The Putty shoule be got approved by the Executive Engineer before use on work. |
| 10 | Plastering with CM 1:5 mix 12 mm thick including all cost and conveyance of labour charges etc., |
| 11 | Brick jelly lime concrete using 20mm brick jelly with slacked lime in the ratio of 32:12.5 including cost and conveyance of all materials to site and all labour charges for mixing , laying ,and finishing etc complete |
| 12 | Finishing the top of roof with one course of PRESSED TILES of size 20 cm X 20 cm X 2 cm laid in cement mortar 1:3 (One cement and three sand) 12mm thick mixed with water proofing compound conforming to I.S. at 2% by we |
| 13 | Distembering two coats with best approved distember including cost and conveyance of all materials to site and all labour charges etc complete |
| 14 | White washing two coats using shell lime including cost and conveyance of all materials to site and all labour charges etc comoplete |
| 15 | Exterior Emulsion painting two coats with best approved quality and colour paint over one coat of Base coat including cost and convyance of all materials to work site and labour charges etc., complete. |
| 16 | Providing granolethic floor finish in cement concrete 1:2:4 mix using 10-12mm ISS metal to 25mm thick including cost and conveyance of all materials to site and all labour charges for mixing, laying, curing etc complete |
| 17 | Providing Steel door arrangements ( 1 m x 2.00m ) |
| 18 | Providing Electricals arrangements |
| 19 | Light point |
| 20 | Supplying & Fixing of Tube Light |
| 21 | Fan Point |
| 22 | Supplying & Fixing of Fan |
| 23 | Plug Point (3x3) |
| 24 | GST Amount for providing Service to the above Government Contract Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column \\"BB\\" for all works in this package} Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 17, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 05, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysOct 05, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender