Tender For Construction of 821 Multi-Storeyed Houses(600 Two Bed Room & 221 Ews) In Pocket-E At Lok Nayak Puram( Bakkarwala)Sub-Head :Installation Of Piezometer With Digital Water Level Recorder (Dwlr) Along With Telemetry Facility , Providing And Fi
Tender Value
28.47 Lakhs
Estimated cost
Bid Submission
21 Sep 2026
1 days left
EMD
56944
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Delhi → Delhi
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction of 821 Multi-Storeyed Houses(600 Two Bed Room & 221 Ews) In Pocket-E At Lok Nayak Puram( Bakkarwala)Sub-Head :Installation Of Piezometer With Digital Water Level Recorder (Dwlr) Along With Telemetry Facility , Providing And Fixing Ball Valves,Shutter Gates Etc. At Pocket-E Loknayakpuram
BOQ
| Sl. No. | Item Description |
| 1 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (zone-lll) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 2 | Centering and shuttering including strutting, propping etc. and removal of form work for : Foundations, footings, bases for columns. |
| 3 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required,complete as per direction of Engineer-in-charge. (a)In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. |
| 4 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture. |
| 5 | Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submittingstrata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer-in-charge, upto 90metre depth below ground level . All types of soil, 300 mm dia |
| 6 | Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer-in-charge. (a) upto 90 metre depth below ground level Rocky strata including Boulders 300 mm dia |
| 7 | Gravel packing in tubewell construction in accordance with IS: 4097, including providing gravel fine/ medium/ coarse, in required grading & sizes as per actual requirement, all complete as per direction of Engineer-in-charge. |
| 8 | Supplying, assembling, lowering and fixing in vertical position in bore well, ERW (ElectricResistance Welded) FE 410 mild steel screwed and socketed/plain ended casing pipes ofrequired dia, conforming to IS: 4270, of reputed & approved make, including painted withoutside surface with two coats of anticorrosive paint of approved brand and manufacture,including required hire & labour charges, fittings & accessories, all complete, for all depths,as per direction of Engineer-in-charge. (a)150 mm nominal size dia having minimum wall thickness 5.00 mm |
| 9 | Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for borewell of: 150 mm dia |
| 10 | Providing and fixing M.S. clamp of required dia to the top of casing/ housing pipe of tubewellas per IS: 2800 (part I), including necessary bolts & nuts of required size all complete as per direction of Engineer-in-charge. (a)150 mm clamp |
| 11 | Taking out existing CC interlocking paver blocks from footpath/ central verge, including removal of rubbish etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge. |
| 12 | Laying old cement cocrete interlocking paver blocks of any design/ shape laid in required line, level, curvature, colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineerin- charge. (Old CC paver blocks shall be supplied by the department free of cost). |
| 13 | Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge. (a) 80 mm thick C.C. paver block of M-30 grade with approved color design and pattern. |
| 14 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge.Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) |
| 15 | Providing and placing in position 100 mm thick factory made machinebatched & machine mixed Precast RCC Covers on drains offootpath of various sizes, of M-25 grade cement concrete for RCC work,including cost of centering, shuttering, reinforcement of 8 mm dia TMTbars of Fe 500 grade @ maximum 100 mm c/c on both ways, neat cementpunning on finished surface, properly encased on all edges with 1.6 mmthick, 100 mm wide MS sheet duly painted over priming coat, reinforcementto be welded at edges with MS sheet and providing 2 Nos. 12 mm dia barfor hooks etc including cost of cartage, all leads & lift, handling at site etc.all complete as per direction of Engineer-in-Charge. |
| 16 | Providing, supplying, installing, testing and commissioning of battery-operated Telemetric Type Digital Water Level Recorder (DWLR) system for online groundwater level monitoring up to 50 m depth, comprising factory-calibrated imported pressure transducer sensor, continuous data logging, telemetry-based web monitoring, IP-65 enclosure, 16×2 LCD display, real-time clock, minimum 2-year battery life, and all necessary accessories, complete as per specifications and directions of Engineer-in-Charge.The item includes supply and fixing of 2-core × 1.0 sq.mm copper cable (approx. 50 m depth), all terminations, clamps and accessories; providing and fixing 45 mm stainless steel padlock with 3 keys for equipment protection; and all labour, tools, plants, machinery, installation, testing, calibration, commissioning, telemetry setup, online data configuration, web hosting/data monitoring services, and all incidental works required for successful operation of the system, complete in all respects. |
| 17 | Providing and fixing 20 mm nominal bore (NB) full-way brass ball valve, screwed type, with PTFE seats, suitable for PPR water supply system, complete with necessary threaded PPR transition fittings, jointing materials, testing and commissioning, complete in all respects, as required and as directed by the Engineer-in-Charge. |
| 18 | Providing and fixing 10 mm thick polished machine cut granite stone of approved shade, colour and texture in cement mortar 1:4 (1 cement : 4 coarse sand), including rubbing, curing, polishing and making necessary holes, grooves, etc. complete as per direction of Engineer-in-Charge |
| 19 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates efc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). |
| 20 | Providing and fixing FRP dust bin with wheel of 240 litre capacity, complete as per direction of Engineer-in-Charge. |
| 21 | Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia steel pulleys,complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer. |
| 22 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works and as per Enginner in charge. |
| 23 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : Powder coated aluminium (minimum thickness of powder coating 50 micron) |
| 24 | Add GST correction factor @0.973 =2750856.00 |
| 25 | add cost index @ 4.03% except item no.16,17 & 20 Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 16, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 21, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 daySep 22, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender