Tender For E8 Tender Id-2026_Mes_Name Of Work: Repair Replacement Of Floor / Wall Tiles, Sanitary Fitting, Plumbing Etc In Certain Quarters Of Ora At Ina Ezhimala
Tender Value
30 Lakhs
Estimated cost
Bid Submission
08 Oct 2026
5 days left
EMD
60000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kannur → Kerala
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for E8 Tender Id-2026_Mes_Name Of Work: Repair Replacement Of Floor / Wall Tiles, Sanitary Fitting, Plumbing Etc In Certain Quarters Of Ora At Ina Ezhimala
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises including disposal of debris to a location earmarked within the INA complete all as specified and as directed. |
| 2 | Demolition of cement concrete (unreinforced) in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) including disposal of debris to a location earmarked within the INA complex complete all as specified and as directed. |
| 3 | Demolition of cement concrete of any description and in any position not otherwise specifically provided for including disposal of debris to a location earmarked within the INA complex complete all as specified and as directed. |
| 4 | Material & labour for cement concrete (1:5:10) Type E2 using 40 mm graded stone aggregate as in foundation, filling in sunken floors, mass concrete etc. all as specified and as directed. |
| 5 | Material & labour for rendering 15 mm thick in cement and sand mortar (1:4) on fair faces of brick or concrete surfaces in sunken floors mixed water proofing compound as per manufacturer's instructions, surface finished even and smooth without using extra cement all as specified and as directed. Note: WPC will be measured and paid separately |
| 6 | Material & labour for preparation of new plastered surface and applying two coats of Acrylic cementitious two component water proof coating with Dr. Fixit Pidifin 2K or equivalent approved by the Garrison Engineer in sunken floors as per manufacturer's instructions complete all as specified and as directed. |
| 7 | Material & labour for plain cement concrete (1:2:4) Type B-0, using 12.5 mm size graded stone aggregate as in levelling course for flooring etc. all as specified and as directed. |
| 8 | Material & labour for 75 mm thick plain cement concrete (1:4:8), Type D-2 using 40mm graded aggregate as in sub base complete all as specified and as directed. |
| 9 | Material & labour for 75 mm thick plain cement concrete (1:2:4), Type B-1, using 20mm graded aggregate as in hard standing / plinth protection, pavings etc. surface finished even and fair without using extra cement including use of necessary form work, screed strips to divide area in to panels complete all as specified and as directed. |
| 10 | Material & labour for Vitrified tiles non skid / matt finish / glossy any type and shade 9 to 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors set and jointed with using 3-4 mm wide spacers and joints filled with epoxy tile grout of matching colour laid over and including 15 mm thick screed bed in cement mortar (1:4) complete all as specified and as directed. |
| 11 | Material & labour for Vitrified tiles any type and shade 9 to 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in skirtings/ dado set and jointed with using 3-4 mm wide spacers and joints filled with epoxy tile grout of matching colour laid over and including 10 mm thick rendering / backing coat in cement mortar (1:4) complete all as specified and as directed. |
| 12 | Material & labour for non-skid coloured ceramic tiles 7-8 mm thick (square/ rectangular), area of each tiles exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15 mm thick screed bed in cement mortar (1:4)complete all as specified and as directed. |
| 13 | Material and labour for Glazed coloured ceramic tiles on vertical surface 600x300X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match laid over and including 10 mm thick rendering in cement mortar (1:4) complete all as specified and as directed. |
| 14 | Material & labour 18 to 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite and moulding of edges to round wherever required complete all as specified and as directed. |
| 15 | Taking down chowkats or frames exceeding 1.5 Sqm but not exceeding 4 Sqm each with shutters without taking off shutters from the frames including making good jambs / holdfast etc with cement mortar or PCC, after removal complete all as specified and as directed. |
| 16 | Material & labour solid PVC door frame of sizes 50mm x 47mm made out of 5mm thick wood grain printed PVC sheet reinforced with MS square tube, edges will be painted to match with printed sheet as per specification and drawings complete all as specified and as directed. |
| 17 | Supply & fix Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded wood grain printed colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with 5 mm thick x 15 mm wide PVC sheet beading used inside stiles and rails and decorative PVC beading of 10 mm x 10mm (90 degree) used , and joined together with solvent cement, supply & fixing in the frame at site as per specification & drawing,all as specified and as directed. |
| 18 | Supply & fix Butt hinges 100 mm, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, Type B-21 complete all as specified and as directed. |
| 19 | Supply & fix 150 mm Aluminium anodised barrel tower bolts of extruded sectionall as specified and as directed. |
| 20 | Supply & fix 250 mm aluminium alloy anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy all as specified and as directed. |
| 21 | Supply & fix in repairs Vitreous China wash down water closet pan (pedestal pattern), along with Plastic water closet seat closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed. |
| 22 | Supply & fix in repairs Vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) completeall as specified and as directed. |
| 23 | Supply & fix in repairs vitreous China wash basin, white coloured, flat back 550x400mm including CP waste coupling, PVC waste pipe, fixing brackets, cutting for and pinning in ends of brackets etc. complete all as specified and as directed. |
| 24 | Supply & fix in repairs PVC valve less syphonic action type flushing cistern low level with inlet ball valve float and handle including brackets 10 ltrs capacity complete all as specified and as directed. |
| 25 | Supply & fix in repairs of PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and as directed. |
| 26 | Supply & fix of 15 mm fancy type wash basin Pillar taps mixer for mixing hot & cold water, Chromium plated cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for pipe and fixed complete all as specified and as directed. |
| 27 | Supply & fix in repairs 15 mm Chromium Plated fancy type Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed all as specified and as directed. |
| 28 | Supply & fix in repairs 15 mm bore dia fancy type chromium plated stop valve / angle valve complete all as specified and as directed. |
| 29 | Supply & fix in repairs Brass Chromium plated wall mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and as directed. |
| 30 | Supply & fix in repairs Brass chromium plated Tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and as directed. |
| 31 | Supply & fix in repairs Towel Ring of chromium plated brass fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90gms) complete all as specified and directed. |
| 32 | Supply & fix in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and as directed. |
| 33 | Supply & fix in repairs Brass chromium plated shower rose 125mm size with swivel joints, including fixing to steel pipe or union complete all as specified and as directed. |
| 34 | Supply & fix in repairs 400x500 mm size standard single door wall mounted storage cabinet mirror of approved makes all as specified and as directed. |
| 35 | Supply & fix in repairs 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and as directed. |
| 36 | Taking up or down steel tubing and connections, 15mm dia complete all as specified and as directed. |
| 37 | Taking up or down steel tubing and connections, 20mm dia complete all as specified and as directed. |
| 38 | Taking up or down steel tubing and connections, 25 or 32 mm dia complete all as specified and as directed. |
| 39 | Supply and laying of 20 mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls / ceiling or laying in floors including necessary cutting, chasing, and making good wherever required complete all as specified and as directed. |
| 40 | Supply and laying of 25 mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including necessary cutting, chasing, and making good wherever required complete all as specified and as directed. |
| 41 | Supply and laying of 32 mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including necessary cutting, chasing, and making good wherever required complete all as specified and as directed. |
| 42 | Supply & fix brass threaded special fittings Elbow for CPVC pipes outer dia 20mm all as specified and as directed. |
| 43 | Supply & fix brass threaded special fittings Female Adaptor (FTA/ FBTA) for CPVC pipes outer dia 20mm all as specified and as directed. |
| 44 | Supply & fix brass threaded special fittings Male adaptor (MTA/ MBTA for CPVC pipes outer dia 20mm all as specified and as directed. |
| 45 | Supply & fix in repairs PVC (SWR) pipes of 110mm dia single socketed in any length with rubber ring joints fixed to walls/laid in floors including taking down of old pipes of any description complete all as specified and as directed. |
| 46 | Supply & fix in repairs PVC (SWR) pipes of 75 mm dia single socketed in any length with rubber ring joints fixed to walls including taking down of old pipes of any description complete all as specified and as directed. |
| 47 | Supply & fix in repairs PVC (SWR) bend of 75 mm dia fitted with access door complete all as specified and as directed. |
| 48 | Supply & fix in repairs 110mm bore PVC SWR bend complete all as specified and directed. |
| 49 | Supply & fix in repairs 110mm bore PVC SWR bend fitted with access door complete all as specified and as directed. |
| 50 | Supply & fix in repairs 110 mm bore PVC (SWR) junction single, (Single T) equal or unequal fitted with access door complete all as specified and as directed. |
| 51 | Supply & fix in repairs 110mm bore PVC SWR branch piece single 'Y' equal or unequal fitted with access door complete all as specified and as directed. |
| 52 | Supply & fix in repairs 110 mm bore PVC (SWR) vent cowl all as specified and as directed. |
| 53 | Supply & fix in repairs of 75 mm dia of outlet PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and as directed. |
| 54 | Supply & fix in repair of PVC (SWR) gully trap 125/110 mm setting and jointing with solvent cement complete all as specified and directed. |
| 55 | Supply & fix in repairs Toilet paper holder with flat recessed type stainless steel Completeall as specified and as directed. |
| 56 | Supply & fix in repairs health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and as directed. |
| 57 | Taking down of cement plaster of any description or thickness/chipping of cement concrete in any situation from brick or concrete surface including raking out of joints, hacking for key scrubbing down with water to received new plaster (Work in foul condition and in shaft) complete all as specified and as directed. |
| 58 | Material & labour for Rendering 10mm thick on fair faces of brick work or concrete surfaces in CM (1:6) finished fair and even without using extra cement all as specified and as directed. |
| 59 | Material & labour preparation of newly plastered surfaces of walls and applying two or more coats of Distemper with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, over a coat of primer of approved manufacturer, of required shade and colour complete, all as specified and as directed. |
| 60 | Supply only of Liquid water proofing compound of approved make,all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 16, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 08, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysOct 14, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 11 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender