Tender For Repair And Maintenance To Sofa And Miscellaneous Furniture, Re-Canning, Painting And Polishing Of Wooden And Steel Furniture Under Ge Satwari
Tender Value
90 Lakhs
Estimated cost
Bid Submission
14 Oct 2026
19 days left
EMD
1.60 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jammu → Jammu and Kashmir
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair And Maintenance To Sofa And Miscellaneous Furniture, Re-Canning, Painting And Polishing Of Wooden And Steel Furniture Under Ge Satwari
BOQ
| Sl. No. | Item Description |
| 1 | Wooden Furniture |
| 2 | Note:- Removal of following existing unserviceable wooden components of various MES furniture items or similar items carefully without disturbing the adjoining parts and S&F new components in lieu of dismantled components including tightening the joints, pinning, screwing nailing,wedging, glueing, providing hinges,applying putty to level the surface, placing every part in-tact and painting the disturbed portion & Scratching the entire wooden pallets ,filling putty to the bore holes making surface smooth by scratching it with sand emery paper, the Wooden furniture shall be French polished with high gloss finish in light Walnut shade, after properly cleaned and smoothened the surface. All kind of work will be executed where the furniture exist in different User Units of GE Satwari including BSO's Furniture Yard, and office hours only as directed by Engineer-in-Charge. Sizes of S&F components will be as per drawing mentioned. |
| 3 | Bed hard FD-246:- |
| 4 | Top shall be 12 mm thick BWR grade plywood existing as per drg. |
| 5 | Head Rest complete existing as per drg. |
| 6 | Foot Rest complete existing as per drg. |
| 7 | Long Rail as per drg. |
| 8 | Stiffner as per drg. |
| 9 | Back, front ply thick 6mm with teak wood beading of head rest and foot rest existing as per drg |
| 10 | L-shape corner of flat iron size 50x5mm thick 5\\" x 5\\" between legs and rail to be fixed with screw. |
| 11 | Polishing. |
| 12 | Chair dining FD-279,1105:- |
| 13 | Back rest complete existing as per drg. |
| 14 | Legs stiffners existing as per drg. |
| 15 | Front legs existing as per drg. |
| 16 | Rear legs existing as per drg. |
| 17 | Rails front, rear and side existing as specified and directed. |
| 18 | Hard PVC shoes as per sample. |
| 19 | Removing the existing unserviceable cane plastic from the chair and Recanning the chair by true Godrej pattern with plastic cane 2mm to 2.5mm wide, white colour, as specified and directed. |
| 20 | Removing the existing unserviceable PVC seat from the chair and S&F PVC seat and one stiffner bottom side provided shall be fixed with proper size screws and good workmanship .Due care shall be taken while fixing the PVC seat, the gaps if appears be filed with putty mixed with adhesive so as to make surface smooth and tightly as specified and directed. |
| 21 | Polishing. |
| 22 | Chair dining Officers FD-357, FD/MAP-II/04:- |
| 23 | Back rest complete existing as per drg. |
| 24 | Vertical stiffner existing as per drg. |
| 25 | Front Legs existing as per drg. |
| 26 | Rear legs existing as per drg. |
| 27 | Leg stiffners existing as per drg. |
| 28 | Rails front, rear and side existing as specified and directed. |
| 29 | Seat made of 12mm thick BWR grade plywood over which polyurethane 40 density foam 75mm thick of shall be provided duly covered with best quality tapestry cloth for cover should be of minimum Rs 200/- per meter all as approved by GE. |
| 30 | Hard PVC shoes as per sample. |
| 31 | Polishing. |
| 32 | Table 3'x2' without drawer FD-231,284 :- |
| 33 | Top shall be 18 mm thick exterior grade pre-laminated particle board one side laminated in light Wallnut shade or as approved by GE, duly covered with 4 mm thick teak wood beading in matching shade as per existing. |
| 34 | Legs existing as per drg. |
| 35 | Long Rails existing as per drg. |
| 36 | Short Rails existing as per drg. |
| 37 | Leg Stiffners side and middle existing as per drg. |
| 38 | Hard PVC shoes as per sample. |
| 39 | Polishing. |
| 40 | Teapoy FD-278,382:- |
| 41 | Top shall be 18 mm thick exterior grade pre-laminated particle board duly covered with 4 mm thick teak wood beading in matching shade as per existing. |
| 42 | Legs existing as per drg. |
| 43 | Long Rails existing as per drg. |
| 44 | Short Rails additional as per directed by Engr-In-Charge. |
| 45 | Long and Short Stiffener existing as per drg. |
| 46 | Hard PVC shoes as per sample. |
| 47 | Polishing. |
| 48 | Table centre FD-29,235, 274 & 375:- |
| 49 | Top shall be 18 mm thick exterior grade pre-laminated particle board one side laminated in light Wallnut shade or as approved by GE, duly covered with 4 mm thick teak wood beading as per existing. |
| 50 | Legs existing as per drg. |
| 51 | Long Rails existing as per drg. |
| 52 | Short Rails additional as per directed by Engr-In-Charge. |
| 53 | Long and Short Stiffener existing as per drg. |
| 54 | Hard PVC shoes as per sample. |
| 55 | Polishing. |
| 56 | Table dining 6 person:-FD-239 & 273,FD/E6/MAP-II/03 :- |
| 57 | Top shall be 18 mm thick pre-laminated MDF board one side laminated in light Wallnut shade duly covered with 4 mm thick teak wood beading as per existing/directed. |
| 58 | Legs existing as per drg. |
| 59 | Long rails existing as per drg. |
| 60 | Short rails existing as per drg |
| 61 | L-shape corner of flat iron 5mm thick 4\\" x 4\\" between legs and rail to be fixed with screw and each table eight piece. |
| 62 | Stiffners existing as per drg. |
| 63 | Hard PVC shoes as per sample. |
| 64 | Polishing. |
| 65 | Table writing:-FD-249 & 275:- |
| 66 | Top shall be 18 mm thick pre-laminated MDF board duly covered with 4 mm thick teak wood beading in matching shade as per existing complete and specified directed. |
| 67 | Locks as per existing. |
| 68 | Front of drawer and shutter made out of 18mm thick pre-laminated MDF board duly covered with 4 mm thick teak wood beading shall be provided all-round the front of drawer and shutter to be fixed with piano type hinges as per drg complete and specified directed.Drawer shall be provided with telescopic channels for smooth movement as deirected by GE. |
| 69 | Teak wood bearers at drawer bottom side as per existing. |
| 70 | Existing sides of the box. All the four sides of the box shall be 18 mm thick MDF BD existing as per drg complete and specified directed. |
| 71 | Plywood 6mm thick back side of box existing as specified and directed. |
| 72 | Short rails and stiffeners as per drg. |
| 73 | Long rails and stiffeners as per drg. |
| 74 | Legs existing as per specified and directed. |
| 75 | Knobs 25mm dia with machine screw and washer as per sample, complete as specified and directed. |
| 76 | Hard PVC shoes as per sample. |
| 77 | Polishing. |
| 78 | Table Dressing Ladies with mirror FD/MAP-II/07 :- |
| 79 | S & F Complete 5mm thick mirror as existing as per drg and as specified |
| 80 | S&F new frame teak wood molding arround mirror to be fixed as per drg complete and specified directed. |
| 81 | S&F new drawers made of pre-laminated MDF board 18mm thick front side and back of drawer shall be 12mm thick plywood, 6mm thick plywood to be fixed bottom of drawer as per existing specified and directed. . |
| 82 | S&F new 75mm Long 'D' shaped SS handle as per drg (Each Set 03 Nos). |
| 83 | S&F new telescopic channel existing as per drg. (Each drawer 2 Nos). |
| 84 | S&F new seat shall be made out of 75mm thick poly urethane foam 40 density covered with tapesrty cloth of minimum Rs 350/- per meter all as approved by GE |
| 85 | S&F new castor wheels 50mm dia heavy duty existing as per drg. (Each stool 4 nos) |
| 86 | Polishing. |
| 87 | Chair Easy HFD-2034 : |
| 88 | S&F Made out of moulded teak wood 38mm semi circular legs existing as per drg/directed. |
| 89 | S&F new rails existing as per drg. |
| 90 | S&F new Stiffners existing as per drg. |
| 91 | S&F back support existing as per drg. |
| 92 | S&F new seat and back rest of 75mm thick U foam and covered with minimum rate of Rs.200/ per meter best quality tapesrty cloth as approved by GE irrespective of what is shown on drg. |
| 93 | Replacement of old torn unserviceable cover of the chair with new tapestry cloth of minimum Rs 500/- per meter as approved by GE all specified directed by E-in-charge. |
| 94 | Spirit polish. |
| 95 | Table Executive HFD 2049 :- |
| 96 | S &F The Top 12mm thick clear/coloured beveled glass top as shown on drg and directed by GE/Engr -in - charge.. |
| 97 | Peg Table : FD-277, 236, 384:- |
| 98 | Top shall be 18 mm thick exterior grade pre-laminated particle board duly covered with 4 mm thick teak wood beading in matching shade as per existing. |
| 99 | S&F new Legs as per drg. |
| 100 | S&F new Long Rails as per drg. |
| 101 | S&F new Short Rails additional as per directed by Engr-In-Charge. |
| 102 | S&F new Long and Short Stiffeners as per drg. |
| 103 | Hard PVC shoes as per sample. |
| 104 | Polishing. |
| 105 | Table dining 4’x3’ (1200x900 mm) FD-273, (FD/E6/MAP-II/03):- |
| 106 | S&F new Top shall be 18 mm thick pre-laminated MDF board one side laminated in light Wallnut shade duly covered with 4 mm thick teak wood beading in matching shade as per existing/directed. |
| 107 | S&F new Legs as per drg. |
| 108 | S&F new Long Rails as per drg. |
| 109 | S&F new Short Rails as per drg. |
| 110 | S&F new stiffners as per drg. |
| 111 | L-shape corner of flat iron 5mm thick 4\\" x 4\\" between legs and rail to be fixed with screw and each table eight piece. |
| 112 | Hard PVC shoes as per sample. |
| 113 | Polishing. |
| 114 | Side Board FD-241/1112 :- |
| 115 | S&F new Back ply thick 6mm as per complete specified and directed. |
| 116 | S&F new Door Shutter shall be side hung with piano type hinges as per existing. |
| 117 | S&F new Drawer as per existing. |
| 118 | S&F new Knobes of drawer as per sample aproved by Engr-in-charge each set of six. |
| 119 | S&F new SS D shaped handle 100mm long as per existing each set of six. |
| 120 | S&F new Top and bottom & sides of the table of 18/19 mm thick prelaminated particle board existing as per drg approved by GE make and colour as per drg. |
| 121 | S&F new legs complete teak wood existing as per drg. |
| 122 | S&F new telescopic channel existing as per drg. (Each drawer 2 Nos). |
| 123 | Polishing. |
| 124 | Table dressing ladies FD-32,FD-251:- |
| 125 | S&F new Back shall be 12mm thick BWR grade plywood existing as per drg. |
| 126 | Top shall be 18 mm thick pre-laminated particle board both side laminated in existing duly covered with 4 mm thick teak wood beading in matching shade specified and directed. |
| 127 | S&F new glass plain 5mm thick sliding shutters existing as per drg. (2 Nos) |
| 128 | Bottom shall be 18 mm thick exterior grade pre-laminated MDF board both side laminated as approved by GE, duly covered with 4 mm thick teak wood beading in matching shade. |
| 129 | S&F new Drawers existing as specified and directed. |
| 130 | S&F new knob existing as per drg. (Each set 2 Nos) |
| 131 | S&F new Legs complete frame teak wood existing as per drg. |
| 132 | S&F Looking mirror of size existing as per drg Make - Saint gobain, Modi Float, Triveni Float Glass. |
| 133 | S&F new molding frame existing as per drg complete specified and directed. |
| 134 | Polishing. |
| 135 | Chair Easy Cushioned FD-358 :- |
| 136 | S&F new Back Rest frame size existing as per drg. |
| 137 | S&F new Front Legs existing as per drg. |
| 138 | S&F new Rear legs existing as per drg. |
| 139 | S&F new Front and rear rails existing as per drg. |
| 140 | S&F new Arm rest existing as per drg. |
| 141 | Seat made of 12mm thick ply BWR plywood over which 40 density cool foam 75mm thick shall be provided duly covered with tapestry cloth minimum rate of Rs-500 per meter best quality as shown on drg and fixed on top of bottom rails by screw/directed. |
| 142 | Seat back made of 12mm thick ply BWR plywood over which 40 density cool foam 75mm thick shall be provided duly covered with tapestry cloth minimum rate of Rs-200 per meter best quality as shown on drg and fixed on top of back rails by screw/directed. |
| 143 | Hard rubber PVC shoes. |
| 144 | Polishing. |
| 145 | Table Dressing Gents FD-31 & 230 :- |
| 146 | S&F New Plywood 12 mm thick to the back of the table fitted with 2 nos key plate for hanging of the table. |
| 147 | S&F Prelaminated particle board 18 mm thick to the side and middle of the table as per drg. |
| 148 | S&F Prelaminated particle board 18 mm thick to the top and bottom of the table as per drg. |
| 149 | S&F new drawers made of prelaminated particle board 18mm thick as per drg. |
| 150 | S&F new frame teak wood molding arround mirror to be fixed as per drg. |
| 151 | S&F new knob existing as per drg. (Each set 2 Nos) |
| 152 | Chair Easy FD-201,229:- |
| 153 | S&F new Rear legs existing as per drg. |
| 154 | S&F new Front Legs existing as per drg. |
| 155 | S&F new bottom seat Rails existing as per drg. |
| 156 | S&F new Stiffner existing as per drg. |
| 157 | S&F new back Rest existing as per drg. |
| 158 | S&F new Arms existing as per drg. |
| 159 | Removing the existing unserviceable cane plastic from the chair and Recanning the chair by true Godrej pattern with plastic cane 2 mm to 2.5 mm wide , white color, as specified and directed. |
| 160 | Hard PVC shoes as per sample. |
| 161 | Polishing. |
| 162 | Chair Writing, FD-261,280,250,1107 :- |
| 163 | S&F new Back Rest existing as per drg/directed. |
| 164 | S&F new Legs Stiffners existing as per drg. |
| 165 | S&F new Front Legs existing as per drg. |
| 166 | S&F new Rear legs existing as per drg. |
| 167 | S&F new Rails front, rear and sides existing as per drg. |
| 168 | S&F new Arms as per drg |
| 169 | Removing the existing unserviceable cane plastic from the chair and Recanning the chair by true Godrej pattern with plastic cane 2 mm to 2.5 mm wide , white color, quality as approved by GE all as specified and as shown on drgs. |
| 170 | Hard rubber PVC shoes as per sample. |
| 171 | Polishing. |
| 172 | Table 900x900x760mm FD-291 :- |
| 173 | Top shall be 18 mm thick exterior grade pre-laminated particle board one side laminated in light Wallnut shade or as approved by GE, duly covered with 4 mm thick teak wood beading in matching shade as per existing. |
| 174 | S&F new legs existing as per drg. |
| 175 | S&F new rail existing as per drg. |
| 176 | S&F new Stiffner existing as per drg. |
| 177 | Hard PVC shoes as per sample. |
| 178 | Polishing. |
| 179 | Table Bed Side FD-248, FD-276:- |
| 180 | Side and top 18mm thick pre-laminated MDF board fixed front side 4mm thick teak wood edging existing as per drg. |
| 181 | Back side 6mm thick teak plywood as per drg. |
| 182 | Shelf 18mm thick pre-laminated MDF board front side 4mm thick teak wood edging as per drg. |
| 183 | S&F new legs complete teak wood existing as per drg. |
| 184 | Polishing. |
| 185 | Stool Dressing CB FD-252,27(M):- |
| 186 | Legs shall be of 45x45mm in section at top and 25x25mm in section at bottom made to shape as shown on drg. |
| 187 | S&F new rails front and rear made to shape as shown on drg. |
| 188 | S&F new rails side made to shape as shown on drg. |
| 189 | S&F new side and middle stiffners made to shape as shown on drg. |
| 190 | Removing the existing unserviceable cane plastic from the stool and Recanning the stool by true Godrej pattern with plastic cane 2 mm to 2.5 mm wide , white color, as specified and directed. |
| 191 | Hard PVC shoes as per sample. |
| 192 | Polishing. |
| 193 | Bin Soiled Linen FD-244:- |
| 194 | S&F Front & Rear teak plywood 6mm as per drg. |
| 195 | The canning on sides shall be done with 2mm wide 0.4mm thick shall be done in godrej pattern as specified and directed. |
| 196 | S&F Side rails as per drg. |
| 197 | The Top shall be 18mm plywood duly covered with 4mm thick teak wood beading overall size as per drg. |
| 198 | S&F new Legs existing as per drg/directed. |
| 199 | Polishing. |
| 200 | Stool Dressing FD/E6/MAP/14 :- |
| 201 | S&F new Legs shall be of 50x30mm existing as shown on drg. |
| 202 | S&F new top rail existing as per drg. |
| 203 | S&F new stiffners existing as per drg. |
| 204 | S&F new seat shall be made out of 12mm thick plywood with 75mm thick poly urethane foam 40 density covered with tapesrty cloth of minimum Rs 500/- per meter all as approved by GE |
| 205 | Hard PVC shoes as per sample. |
| 206 | Polishing. |
| 207 | Hat Stand FD-233 :- |
| 208 | Teak wood frame shall be provided Top and bottom & sides as per drg. |
| 209 | S&F Front of frame 4mm thick teak plywood existing as per drg. |
| 210 | S&F back of frame 4mm thick plywood and 2 nos key plate for hanging existing as per drg . |
| 211 | Looking mirror 5.5mm thick of size 300x450mm shall be provided with teak wood beading made to shape existing as per drg. |
| 212 | pegs of size 120x75mm (overall) shall be fixed with screw as directed by Engr-in-charge. (Each set 4 Nos) |
| 213 | Polishing. |
| 214 | Table dining 8 person FD-273,FD/E6/MAP-II/03 :- |
| 215 | Top shall be 18 mm thick pre-laminated MDF board one side laminated in light Wallnut shade or as approved by GE, duly covered with 4 mm thick teak wood beading as per existing. |
| 216 | S&F new Legs as per drg. |
| 217 | S&F new Long rails as per drg. |
| 218 | S&F new Short rails as per drg |
| 219 | L-shape corner of flat iron 5mm thick 4\\" x 4\\" between legs and rail to be fixed with screw and each table eight piece. |
| 220 | S&F new stiffners as per drg. |
| 221 | Hard PVC shoes as per sample. |
| 222 | Polishing. |
| 223 | BED PLY TOP (FD-1102) :- |
| 224 | Both side prelaminated Particle board 25mm thick teak vaneer foot board as per drg complete as specified and as directed. |
| 225 | Both side prelaminated Particle board 25mm thick teak vaneer head board as per drg complete as specified and as directed. |
| 226 | S&F new Top shall be 12 mm thick BWR grade plywood existing as per drg/directed. |
| 227 | Teak wood stiffners existing as per drg. |
| 228 | Teak wood long rail existing as per drg complete as specified and directed. |
| 229 | Teak wood short rail existing as per drg complete as specified and directed. |
| 230 | Teak wood legs existing as per drg complete as specified and directed. |
| 231 | New teak wood beading 40x40 made to shape fixed on headrest and footrest as per drg as specified and directed. |
| 232 | Polishing. |
| 233 | Rack For Record 6'x2'x6' (FD-125 M) :- |
| 234 | New planks of teak wood as per drg complete as specified and directed. |
| 235 | S&F New long rail as per drg complete as specified and directed. |
| 236 | S&F New short rail of teek wood as per drg complete as specified and directed. |
| 237 | S&F New stiffner as per drg complete as specified and directed. |
| 238 | S&F New legs as per drg complete as specified and directed. |
| 239 | Polishing. |
| 240 | TABLE OFFICE CLK WOODEN (WDF-31) |
| 241 | Top shall be 18 mm thick exterior grade pre-laminated particle board one side laminated in light Wallnut shade or as approved by GE, duly covered with 6 mm thick teak wood beading as per existing. |
| 242 | Legs complete as specified and directed. |
| 243 | Long rail/ stiffeners as specified and directed. |
| 244 | Short rail /stiffeners bottom complete as specified and directed. |
| 245 | Teak wood Drawer complete as specified and directed. |
| 246 | Knobs 25mm dia with machine screw and washer as per sample, complete as specified and directed. |
| 247 | lock 50mm 4 lever with duplicate keys. |
| 248 | TABLE OFFICE OFFICER WOODEN (WDF-32) |
| 249 | Top shall be 18 mm thick exterior grade pre-laminated particle board one side laminated in light Wallnut shade or as approved by GE, duly covered with 6 mm thick teak wood beading and bottom side fix with 20x40mm teak wood as per existing. |
| 250 | S&F new teak wood box complete as specified and directed. |
| 251 | S&F teak wood door existing complete as per drg. |
| 252 | Teak wood Drawer complete as specified and directed. |
| 253 | Knobs 25mm dia with machine screw and washer as per sample, complete as specified and directed. |
| 254 | Lock 50mm 4 lever with duplicate keys. |
| 255 | Chair dining Type I HFD-2030: |
| 256 | Back rest complete existing as per drg. |
| 257 | Vertical stiffner existing as per drg. |
| 258 | Front Legs existing as per drg. |
| 259 | Rear legs existing as per drg. |
| 260 | Leg stiffners existing as per drg. |
| 261 | Rails front, rear and side existing as specified and directed. |
| 262 | Seat made of 12mm thick BWR grade plywood over which polyurethane 40 density foam 75mm thick of shall be provided duly covered with best quality tapestry cloth for cover should be of minimum Rs 200/- per meter all as approved by GE. |
| 263 | Hard PVC shoes as per sample. |
| 264 | Polishing. |
| 265 | Trestle Store Room FD-86M, FD-141: |
| 266 | Front legs as per drg |
| 267 | Rear legs existing as per drg. |
| 268 | Rails front, rear and side existing as specified and directed. |
| 269 | Bin soiled lined multipurpose FD/E6/MAP/09 : |
| 270 | S&F new Back ply thick 6mm as per complete specified and directed. |
| 271 | S&F new Door Shutter shall be side hung with hydraulic type hinges as per existing. |
| 272 | S&F new Drawer as per existing. |
| 273 | S&F new SS D shaped handle 100mm long as per existing each set of six. |
| 274 | S&F new Top and bottom & sides of the table of 18/19 mm thick prelaminated particle board existing as per drg approved by GE make and colour as per drg. |
| 275 | S&F new legs complete teak wood existing as per drg. |
| 276 | S&F new telescopic channel existing as per drg. (Each drawer 2 Nos). |
| 277 | Polishing. |
| 278 | Rack Side 4 Spaces : |
| 279 | Top shall be provided as per directed by Engr-in-charge |
| 280 | Front legs existing as per drg. |
| 281 | Rear legs existing as per drg. |
| 282 | Rails side to side existing as specified and directed. |
| 283 | Sofa Set 5 seater ( 2 Single Seater and one 3 Seater) FD-281,1113, FD/MAP-II/02:- |
| 284 | Legs front and rear of teak wood of size 70x35mm in section made to shape as shown on drg. |
| 285 | Arms of teak wood of size 70x35mm in section Made to shape as shown on drg. |
| 286 | Front rails of teak wood of size 35x100mm in section made to shape as shown on drg. |
| 287 | Side rails of teak wood of size 35x100mm in section made to shape as shown on drg. |
| 288 | Back rails of teak wood of size 35x70mm in section made to shape as shown on drg. |
| 289 | Batten of teak wood of size 50x20mm shall be fixed as shown on drg. |
| 290 | Teak wood bearer of size 40x40mm as shown on drg. |
| 291 | All teak wood surfaces shall be given high gloss French polish with lacquer finish. |
| 292 | Hard PVC shoes as per sample. |
| 293 | Sofa Set 4 seater FD-281,1113, FD/MAP-II/02 :- |
| 294 | Legs front and rear of teak wood of size 70x35mm in section made to shape as shown on drg. |
| 295 | Arm of teak wood of size 35x70mm in section Made to shape as shown on drg. |
| 296 | Front rails of teak wood of size 35x100mm in section made to shape as shown on drg. |
| 297 | Side rails of teak wood of size 35x100mm in section made to shape as shown on drg. |
| 298 | Back rails of teak wood of size 35x70mm in section made to shape as shown on drg. |
| 299 | Batten of teak wood of size 50x20mm shall be fixed as shown on drg. |
| 300 | Teak wooden bearer of size 40mmx40mm as shown on drg. |
| 301 | All teak wood surfaces shall be given high gloss French polish with lacquer finish. |
| 302 | Hard PVC shoes as per sample. |
| 303 | Taking out old pressed /torn old cushions and Supply 40 density thick foam cushion of size 21''x22”x4” duly covered with the Tapestry cloth as approved by GE.Cushion cover shall be provided with best quality zip stitched on one edge of cushion cover with standard fitting. Tapesrty cloth for cover should be of minimum Rs 200/- per meter all as approved by GE. |
| 304 | Taking out old torn faded cushion cover from old cushions and S&F new cushion cover to the existing cushion cover. Cushion cover shall be provided with best quality zip stitched on one edge of cushion cover with standard fitting. Tapesrtry cloth for cover should be of minimum Rs 200/- per meter all as approved by GE. |
| 305 | (Steel Furniture) |
| 306 | Note:- Removal of following existing unserviceable Steel components of various MES furniture items or similar items carefully without disturbing the adjoining parts and S&F new components in lieu of dismantled components including tightening the joints, pinning, screwing nailing,wedging, glueing, providing hinges,applying putty to level the surface, placing every part in-tact and painting the disturbed portion & Scratching the entire wooden pallets ,filling putty to the bore holes making surface smooth by scratching it with sand emery paper, the Steel furniture shall be Steel Painted with exist colour, after properly cleaned and smoothened the surface. All kind of work will be executed where the furniture exist in different User Units of GE Satwari including BSO's Furniture Yard, and office hours only as directed by Engineer-in-Charge. Sizes of S&F components will be as per drawing mentioned. |
| 307 | Almirah small steel with shelves :-FD-67(M)/1032:- |
| 308 | S&F 3-Way locking system as per drg. |
| 309 | Lock as per existing pattern and shape. |
| 310 | SS Handle as approved by GE irrespective of what is shown on drg. |
| 311 | S&F new Legs existing as per drg. |
| 312 | Repairs to dented door by removing the door from hinges, making smooth and straight by removing dent applying putty and refixing including replacing UNSV hinges. |
| 313 | Repairs to existing shelf by opening the clips/rivets of shelf, making smooth and straight by removig dent applying putty and refixing including replacing UNSV clips/rivets. |
| 314 | S&F new shelf by opening the clips/rivets and fixing including replacing UNSV shelf as per drg. |
| 315 | S&F new door by removing the UNSV door from hinges, and fixing including replacing UNSV hinges. |
| 316 | Almirah large steel :FD-67(M)/1031:- |
| 317 | 3-Way locking system for almirah large as per drg. |
| 318 | Lock as per existing pattern and shape. |
| 319 | SS Handle as approved by GE irrespective of what is shown on drg. |
| 320 | S&F new Legs existing as per drg. |
| 321 | Repairs to dented door by removing the door from hinges, making smooth and straight by removing dent applying putty and refixing including replacing UNSV hinges. |
| 322 | Repairs to existing shelf by opening the clips/rivets of shelf, making smooth and straight by removig dent applying putty and refixing including replacing UNSV clips/rivets. |
| 323 | S&F new shelf by opening the clips/rivets and fixing including replacing UNSV shelf as per drg. |
| 324 | S&F new door by removing the UNSV door from hinges, and fixing including replacing UNSV hinges. |
| 325 | Bed hard FD/E6/MAP/08(R):- |
| 326 | Taking out existing broken plywood from the bed hard by loosening the nut bolts with washers. S&F new12 mm thick BWR grade plywood fixed to bed hard frame with new GI Nut, bolts as specified in drg. |
| 327 | S&F new Stiffner 25mm, 16 guage square MS pipe and welded properly at joints as per drg. |
| 328 | Head rest & Foot rest MS pipe welded properly at broken joints as per drg. |
| 329 | Taking out existing broken head board from bed hard and fixing new head board with 18 mm thick exterior grade pre laminated particle board both side laminated shade as approved by GE with 4mm thick teak wood beading in matching shade with new screws. |
| 330 | Taking out existing broken foot board from bed hard and fixing new foot board with 18 mm thick exterior grade pre laminated particle board both side laminated in light walnut shade or shade as approved by GE with 4mm thick teak wood beading in matching shade with new screws. |
| 331 | Hard rubber shoes as per drg. |
| 332 | Chair writing officer's FD/E6/MAP/12:- |
| 333 | S&F new seat made of 12mm thick BWR grade plywood over which 50 mm thick 50-55 kg/cum density foam cushion shall be fixed with pvc lipping all round. The foam and plywood shall also be covered with minimum rate of Rs-500/ mtr best quality Tapesrty Cloth/fabric as approved by BSO and GE irrespective of what is shown on drg. |
| 334 | S&F new back made of 12mm thick BWR grade plywood over which 50 mm thick 50-55 kg/cum density foam cushion shall be fixed with pvc lipping all round. The foam and plywood shall also be covered with minimum rate of Rs-500/ mtr best quality Tapesrty Cloth/fabric as approved by GE irrespective of what is shown on drg. |
| 335 | Replacement of new arms with polyurethane reinforced with MS insert arms as shown on drgs /existing in chair. |
| 336 | Rubber stoper as per drg. |
| 337 | Table office clerk steel FD-1004:- |
| 338 | Top shall be 18 mm thick exterior grade pre-laminated particle board one side laminated in light Wallnut shade or as approved by GE, duly covered with 4 mm thick teak wood beading in matching shade with synthetic adhesive. |
| 339 | Replacement of Legs 25 mm 16 gauge square MS pipe. |
| 340 | Replacement of lock of drawer as per sample kept with GE Office. |
| 341 | Repairs to Drawer include tempering/denting, painting, welding, etc. |
| 342 | Stiffner of 25 mm 16 gauge square MS pipe. |
| 343 | Rubber shoes as per drg. |
| 344 | Table office officer steel FD-1003, HFD-2051:- |
| 345 | Top shall be 18 mm thick exterior grade pre-laminated MDF board one side laminated in light Wallnut shade or as approved by GE, duly covered with 4 mm thick teak wood beading in matching shade with synthetic adhesive. |
| 346 | Replacement of Legs 25 mm 16 gauge square MS pipe. |
| 347 | Replacement of lock of drawer as per sample kept with GE office. |
| 348 | Repairs to Drawer include tinkering/denting, painting, welding, etc. |
| 349 | Stiffner of 25 mm 16 gauge square MS pipe. |
| 350 | Rubber shoes as per drg. |
| 351 | Table 900x600x760 mm w/o drawer FD-1007:- |
| 352 | Top shall be 18 mm thick exterior grade pre-laminated Particle Board one side laminated in light Wallnut shade or as approved by GE, duly covered with 4 mm thick teak wood beading in matching shade with synthetic adhesive. |
| 353 | Replacement of rails short and long 25mm 16 gauge squire MS pipe as per drg. |
| 354 | Replacement of Legs 25 mm 16 gauge square MS pipe. |
| 355 | S&F new stiffners of size 25 mm 16 gauge square MS pipe. |
| 356 | Rubber Shoes as per drg. |
| 357 | Table 900x600x760 mm with drawer FD-83/1008:- |
| 358 | Top shall be 18 mm thick exterior grade pre-laminated particle board one side laminated in light Wallnut shade or as approved by GE, duly covered with 4 mm thick teak wood beading in matching shade with synthetic adhesive. |
| 359 | Replacement of rails short and long 25mm 16 gauge squire MS pipe as per drg. |
| 360 | Replacement of Legs 25 mm 16 gauge square MS pipe. |
| 361 | Replacement of lock of drawer as per sample kept with GE office. |
| 362 | S&F new stiffners of size 25 mm 16 gauge square MS pipe. |
| 363 | S&F New Drawer include tinkering/denting, painting, welding, etc. |
| 364 | Rubber Shoes as per drg. |
| 365 | Ladder Aluminium FD-1025 :- |
| 366 | S&F new Aluminium fluted conduit pipe rung as per drg. |
| 367 | Hard rubber shoes as per drg. |
| 368 | Table bed side FD/E6/MAP/15(R) :- |
| 369 | S&F of new top of 18 mm thick exterior grade pre-laminated particle board of existing shade covered with 4 mm teak wood beading in matching shade as per drg. |
| 370 | S&F new side bd of 18mm thick pre-lamited particle bd existing as per drg. |
| 371 | S&F new upper drawer front side pre-laminated particle bd and 12mm thick BWR commercial ply used in drawers existing as per drg. |
| 372 | S&F new lower drawer front side pre-laminated particle bd and 12mm thick BWR commercial ply used in drawers existing as per drg. |
| 373 | S&F new SS Handle for cupboard existing as per drg. |
| 374 | S&F Legs of MS square pipe of 18mm, 18 gauge thick as per drg. |
| 375 | S&F new stiffner of square pipe 18mm, 18gauge 2 Nos each to be welded in between front legs and rear legs of the frame as per direction in Engr-in-charge. |
| 376 | Replace old UNSV/rusted telescopic channel for smooth functioning. |
| 377 | S&F new back side BWR plywood 6mm thick existing as per drg. |
| 378 | Hard rubber shoes as per drg. |
| 379 | Rack Shoe Steel FD/E6/MAP/02(R) :- |
| 380 | 3mm dia MS rod welded to frame as per drg. |
| 381 | Chair Easy Steel FD-121 (M) : |
| 382 | Removing the existing UNSV seat the chair. S&F seat 12mm thick BWR grade plywood over which 32-40 density foam cushion, 50mm thick, cushion shall be fixed with plywood. The foam and plywood shall also be covered with minimum rate of Rs-500 per meter best quality Tapesrty Cloth as approved by BSO and GE irrespective of what is shown on drg. |
| 383 | Removing the existing UNSV back the chair. S&F back 12mm thick BWR grade plywood over which 32-40 density foam cushion, 50mm thick, cushion shall be fixed with plywood. The foam and plywood shall also be covered with minimum rate of Rs-500 per meter best quality Tapesrty Cloth as approved by BSO and GE irrespective of what is shown on drg. |
| 384 | PVC rubber sheos as per drg. |
| 385 | Desk FD-1021 :- |
| 386 | Desk shall be made of wood planks as specified in drg as box with front side open and top sloping with 4mm thick teak wood beading on front side. |
| 387 | PVC sheos as per drg. |
| 388 | Table Centre Two Tire HFD-2040 :- |
| 389 | The Top 10mm thick clear/coloured beveled glass top should be fitted with pvc vaccume pads for mounting as gripping the glass top as per drg. |
| 390 | Rubber shoes 35x15mm for CPR. |
| 391 | Ladder For Loft FD-238 :- |
| 392 | S&F new 25mm conduit MS pipe rung welded to stringers as per drg. |
| 393 | Hard rubber shoe as per drg. |
| 394 | Teapoy Verandah FD/E6/MAP/17 :- |
| 395 | Top shall be 18 mm thick prelaminated particle board one side laminated in light Wallnut shade or as approved by GE, duly covered with 4 mm thick teak wood beading in matching shade with synthetic adhesive. |
| 396 | Rubber shoes as per drg. |
| 397 | S&F new long rail, short rail existing as per drg MS squire pipe and welded properly joints as per drg. |
| 398 | 5mm dia MS bar base tray 12x10 nos at equal distance welded properly joints as per drg. |
| 399 | Teapoy Verandah FD-253 :- |
| 400 | Top shall be 18 mm thick prelaminated particle board one side laminated in light white shade or as approved by GE, duly covered with 4 mm thick teak wood beading in matching shade with synthetic adhesive. |
| 401 | Rubber Shoes as per drg. |
| 402 | S&F new long rail, short rail existing as per drg MS flat iron and welded properly joints as per drg. |
| 403 | S&F new legs of coduit pipe existing as per drg. |
| 404 | S&F new stiffner short and long existing as per drg. |
| 405 | Chair verandah FD-255 & 259 : |
| 406 | Spot arc welding to broken parts/joints of chairs. |
| 407 | Removing the existing UNSV cane plastic from the chair and Recanning the chair with plastic cane 4mm wide, white colour, (MAT Pattern),quality as approved by GE/Engr-in-Charge. |
| 408 | Removing the existing unserviceable cane plastic from the chair. S&F PVC seat and back 4mm thick to the chair after providing one extra support in between seat and back of chair.The support shall be of 5mm dia MS flat iron patti welded horizontally seat and back as directed by BSO. The PVC seat shall be got approved from BSO/GE before supply. |
| 409 | Removing the existing UNSV PVC seat and back from the chair. S&F PVC seat and back 4mm thick to the chair. The support shall be of 5mm dia MS flat iron patti welded horizontally seat and back as directed by BSO. The PVC seat shall be got approved from GE before supply. |
| 410 | Spray painting all steel surface with existing shade & colour or as approved by GE after application of sand paper & grinder to make the surface smooth & even and applicable of red-oxide primer. |
| 411 | S&F best quality new PVC shoes to the legs of chair. |
| 412 | Chair revolving cushioned with arm all type:- |
| 413 | Replacement of pedestal assembly of chairs revolving same as shown on existing in chair. |
| 414 | Replacement of hydroulic hight adjustment base assembly of chairs revolving same as shown on existing in chair. |
| 415 | Replacement of new arms with polyurethane reinforced with MS insert arms as shown on existing in chair. |
| 416 | Removing the old torn/damaged tapestry cloth/rexine from the seat of the chair and providing the same with tapestry/rexine over a layer of foam (75mm thick,40 density) as shown on drgs /existing in chair. Colour & shade of cloth/Rexine as approved by GE. |
| 417 | Removing the old torn/damaged tapestry cloth/rexine from the back of the chair and providing the same with tapestry/rexine over a layer of foam(75mm thick,40 density) as shown on drgs /existing in chair. Colour & shade of cloth/Rexine as approved by GE. |
| 418 | Stool steel with back rest type-II HFD-2007 :- |
| 419 | Seat made of 12mm thick BWR grade plywood over which 50 mm thick 32 density foam cushion shall be fixed .The foam and plywood shall also be covered with best quality fabric/rexine as approved by GE irrespective of what is shown on drg. |
| 420 | Back rest made of 12mm thick BWR grade plywood over which 50 mm thick 32 density foam cushion shall be fixed .The foam and plywood shall also be covered with best quality fabric/rexine as approved by GE irrespective of what is shown on drg. |
| 421 | Spray painting all steel surface with existing shade & colour or as approved by GE after application of sand paper & grinder to make the surface smooth & even and applicable of red-oxide primer. |
| 422 | PVC sheos as per drg. |
| 423 | Chair CB with arms Steel FD-75 :- |
| 424 | S&F Handle of teak wood fixed with arms as per drg. |
| 425 | S&F new seat of teak wood as per drg. |
| 426 | S&F new back of teak wood as per drg. |
| 427 | Spray painting all steel surface with existing shade & colour or as approved by GE after application of sand paper & grinder to make the surface smooth & even and applicable of red-oxide primer. |
| 428 | Table Steel 900x900x760 mm FD 1009 :- |
| 429 | Top shall be 18mm thick exterior grade pre-laminated particle board one side laminated in light wallnut shade or as approved by GE, duly covered with 4mm thick teakwood beading in matching shade with synthetic adhesive. |
| 430 | S&F new Legs of MS Square pipe of size 25mm 16 gauge as per drg. |
| 431 | S&F new long rail and short rail of MS square pipe of size 25mm 16 gauge as per drg. |
| 432 | S&F new long and middle stiffners of MS square pipe of size 25mm 16 gauge as per direction Engr-in-charge. |
| 433 | Rubber shoes as per drg |
| 434 | Locker bed side steel FD-1029 :- |
| 435 | SS Handle as approved by GE irrespective of what is shown on drg. |
| 436 | S&F new tubler pipe 20mm dia 1.00mm thick as per drg. |
| 437 | S&F new Legs existing as per drg. |
| 438 | Repairs to dented door by removing the door from hinges, making smooth and straight by removing dent applying putty and refixing including replacing UNSV hinges. |
| 439 | Repairs to existing shelf by opening the clips/rivets of shelf, making smooth and straight by removing dent applying putty and refixing including replacing UNSV clips/rivets. |
| 440 | S&F new shelf size 1.2mm thick by opening the welded and refixing by replacing UNSV shelf. |
| 441 | S&F new door size 1.2mm thick by removing the UNSV door from hinges, and fixing by replacing UNSV hinges |
| 442 | Charpoy IP Hard Top Steel MAP FD/MAP-II/01 :- |
| 443 | Taking out existing broken plywood from the charpoy IP by loosening the nut bolts with washers. S&F new12 mm thick BWR grade plywood fixed to charpy IP frame with new GI Nut, bolts. |
| 444 | S&F new Stiffner 25mm, 16 guage square MS pipe and welded properly at joints as per drg. |
| 445 | S&F new Legs 32mm, 16 guage square MS pipe and welded properly at joints as per drg. |
| 446 | S&F new long rail and short rail of size 65mmx25mm 16 gauge rectangular MS pipe and welded properly joints as per drg. |
| 447 | Hard rubber shoes as per drg. |
| 448 | Rack Adjustable 3 tier FD-1037 :- |
| 449 | Repairs to existing shelf by opening the clips/rivets of shelf, making smooth and straight by denting applying putty and refixing by replacing unserviceable clips/rivets and shelf. |
| 450 | Rack Adjustable 6 tier FD-1038 :- |
| 451 | Repairs to existing shelf by opening the clips/rivets of shelf,making smooth and straight by denting applying putty and refixing by replacing unserviceable clips/rivets and shelf. |
| 452 | Chair School With Hand Board FD/E6/MAP/05 :- |
| 453 | Removing the existing UNSV PVC seat & back from the chair. S&F PVC seat & back 4mm thick with screw. The PVC seat shall be got approved from GE before supply. |
| 454 | S&F new Top prelaminated particle bd 18mm thick openable with PVC edging screwed to 25mm hollow steel pipe inserted in 20mm MS rod welded to frame as per drg. |
| 455 | Spot arc welding to broken parts/joints of chairs. |
| 456 | PVC rubber sheos as per drg. |
| 457 | Table Computer FD/E6/MAP/03 :- |
| 458 | Removing the existing UNSV Top S&F new 18mm prelaminated particle board table top with PVC edging as existing. |
| 459 | Removing the existing UNSV pull out tray with telescopic channels S&F new 18mm prelaminated particle board pull out tray and telescopic channel with with PVC edging as existing. |
| 460 | Removing the existing UNSV drawer with telescopic channels S&F new 18mm prelaminated particle board drawer and telescopic channel with with PVC edging as existing. |
| 461 | Removing the existing UNSV key bd tray with telescopic channels S&F new 18mm prelaminated particle board key bd tray and telescopic channel with with PVC edging as existing. |
| 462 | S&F new 18mm thick pre laminated particle board Vericle with PVC edging as existing. |
| 463 | S&F new 18mm thick pre laminated particle board bottom shelf with PVC edging as existing. |
| 464 | Book case steel FD-1028 :- |
| 465 | Removing the existing UNSV lock S&F new set of locks operateable with single key as per drg (One Set = 4 Nos Lock). |
| 466 | S&F new SS handle existing as per drg. |
| 467 | S&F new pane glass existing as per drg. |
| 468 | S&F new shelves existing as per drg. |
| 469 | Repair sliding shutter existing as per drg. |
| 470 | S&F 1.5mm MS sheet welded with bottom side as per drg. |
| 471 | Cabinet Filling 4 Drawer steel FD-397 :- |
| 472 | Removing the existing UNSV lock S&F new set of locks operateable with single key as per drg (One Set = 4 Nos Lock). |
| 473 | UNSV bottom welded 1.5mm ms sheet shall be done in accordance with the standerd workmanship as per drg. |
| 474 | Step Two Tier Steel HFD-2009 :- |
| 475 | S&F new Tubular Mild steel legs, Stiffnes existing as per drg. |
| 476 | Rubber shoes as per drg. |
| 477 | Charpoy GI Pipe FD-220 :- |
| 478 | Taking out existing broken plywood from the charpoy GI pipe by loosening the nut bolts, tighten the each part of charpoy. Supply and fixing 12mm thick BWR grade plywood and 02 Nos flat Iron of size 35mm x 6mm duly painted in black colour of length equal to width of plywood/GI charpoy of appropriate size (As per Drg) to GI pipe frame with new GI Nut, bolts 6mm dia 62 to 65mm long. |
| 479 | Removing old unserviceable three-way elbow from the GI pipe and S&F new three-way elbow 32 mm dia ISI marked, complete all as specified/shown on drg and directed by Engr-in-Charge. |
| 480 | Removing old unserviceable GI check nuts from the GI charpoy frame & S&F new GI check nuts 32mm bore/dia & 10 mm wide as specified/shown on drawing and as directed. |
| 481 | Removing old broken and long rail from charpoy and S&F new long rails of GI pipe ISI marked, 32mm dia medium grade duly treaded up to 22 mm on both ends to be fitted to the frame complete all as specified & shown on drg or as directed by Engr-in-charge. |
| 482 | Removing old broken ends short rails from charpoy and replacing with new short rails of GI pipe made out of long rails retrived vide serila items 03.03 here-in-before duly threaded at both ends up to 22 mm long at both ends to be fitted to the frame complete all as shown on drg or as ditected by Engr-in-charge. |
| 483 | Removing old broken ends and legs from charpoy GI and replacing with new legs of GI pipe made out of short rails retrived vide serial item 03.04 here-in-before, duly threaded at one end to be fitted to the frame. The lower ends of the leg shall be provided 3mm thick MS plate of 40mm dia shall be provided duly continous welding with and including provision of FMN set as directed by Engineer-in-charge irrespective of what is shown on drg. Rest all as shown on drg and as directed. |
| 484 | Almirah large steel with shelves FD 67 (m), 1031:- Painting. |
| 485 | Almirah small steel with shelves FD-67(M)/1032:- Painting. |
| 486 | Bed Plytop MAP Steel FD/E6/MAP/08R:- Painting. |
| 487 | Chair writing officer's FD/E6/MAP/12:- Painting. |
| 488 | Table office clerk steel FD-1004:- Painting. |
| 489 | Table office officer steel 1003:- Painting. |
| 490 | Table 900x600x760 mm w/o drawer FD-1007: Painting. |
| 491 | Table 900x600x760 mm with drawer FD-83/1008: Painting. |
| 492 | Teapoy Varandah FD-253, :- Painting. |
| 493 | Table Steel 900x900x760 mm FD 1009 : Painting. |
| 494 | Table Dining OR's Steel FD-165 :- Painting. |
| 495 | Locker bed side steel FD-1029 : Painting. |
| 496 | Charpoy IP Hard Top Steel MAP FD/MAP-II/01 : Painting. |
| 497 | Rack Adjustable 3 tier FD-1037 :- Painting. |
| 498 | Rack Adjustable 6 tier FD-1038 :- Painting. |
| 499 | Chair School With Hand Board FD/E6/MAP/05 :- Painting. |
| 500 | Table Computer FD/E6/MAP/03 :- Painting. |
| 501 | Book case steel FD-1028 :- Painting. |
| 502 | Cabinet Filling 4 Drawer steel FD-397 :- Painting. |
| 503 | Charpoy IP folding Hard top FD-388(R) :- Painting. |
| 504 | Rack Shoe Steel FD/E6/MAP/02(R) :- Painting. |
| 505 | Chair Easy Steel FD-121 (M) :- Painting. |
| 506 | Desk FD-1021 :- Painting. |
| 507 | Table Office Clerk type I HFD-2051 :- Painting. |
| 508 | Teapoy Verandah FD/E6/MAP/17 :- Painting. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 16, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 14, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysOct 16, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 21 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender