Tender For special Repair To Building Number P-30 And P-31 At Number One Inf Bn Brichgunj Mil Stn, Sri Vijaya Puram.
Tender Value
43.19 Lakhs
Estimated cost
Bid Submission
07 Oct 2026
5 days left
EMD
86500
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
South Andamans → Andaman And Nicobar Islands
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special Repair To Building Number P-30 And P-31 At Number One Inf Bn Brichgunj Mil Stn, Sri Vijaya Puram.
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of Reinforced cement concrete roofs, floors (other than ground floors), beams, staircases,landing, chajjas and similar suspended work in any description and in any position complete all as specified and as directed. |
| 2 | M&L for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. Fe-410-W(Gde-E-250) quality-B complete all as specified and as directed. |
| 3 | M&L for Mild steel flat iron 40 x 6mm as in wind tie including all necessary drilling, bolting or riveting etc., confirming to Fe 290 complete all as specified and as directed. |
| 4 | M&L for Preparation of new steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed. |
| 5 | S&F Mild steel bolts exc 12mm abd n.exc 20mm dia , purpose made, with hexagonal or square head one end and screwed the other, or screw both ends; each screwed end to be fitted with washers and one hexagonal or square nut, exc 30cm long complete all as specified and as directed. |
| 6 | S&F PVC (SWR ) pipes , 110 mm bore, single socketed in any length with rubber ring joints fixed to walls for rain water pipe complete all as specified and as directed |
| 7 | S&F Pre-painted galvalume aluminium zinc coating GI based (corrugated/semi corrugated) sheet 0.50mm thick as per approved profile, coloured, having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed. |
| 8 | S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed. |
| 9 | M & L for Water proofing treatment with the following specifications including taking down existing roof treatment of any description and cleaning with water and scrubbing and disposing off the rubbish outside the premises, complete all as specified and as per manufacturers instructions:- (i) Rendering 10mm thick in CM 1:4 on concrete surfaces mixed with water proofing compouund @ 3% by weight of cement as in leveling course.(ii) Apply a coat of hot blown bitumen 85/25 @ 1.20 kg/sqm over a coat of bituminous primer @ 0.3 ltr per sqm. (iii) Laying APP membrane (STP Aquashield or equivalent) weighing not less than 3.5 Kg/sqm, reinforced with polyster non woven fabric (weighing not less than 150 gms/sqm) with 100mm over laps both longitudinally and transversally and overlaps shall be sealed by torch, membrane shall be taken to the parapet through fillet and shall be tucked in inside after a height of 300 mm. (iv) Apply one coat of hot blown bitumen 85/25 @ 1.2 kg/sqm over the membrane.Note :- Water proofing compound shall be measured and paid separately. |
| 10 | S&F Aluminium anodised snap grid frame work (size of grid 605x605mm) with 35x25x1.5mm main tee and 25x25x1.4mm, cross tee and wall angle for false ceiling and suspended with 6mm dia GI wire, hooked to roof with needful adjustement up to 1200mm long by means of ceiling cleats made out of GI Flat 40 X 3mm 60mm long and expansion hold fasteners 12.5mm dia 40mm long, including dismantling celing board of any description and any type fixed to the aluminium frame work with screws or nails etc complete all as specified and as directed. |
| 11 | S&F Eco board 600 X 600 X 4mm thick decorative type fixed to the aluminium frame work with screws or nails etc including applying two coats of oil bound distemper over a coat of primer complete all as specified and as directed. |
| 12 | Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed. |
| 13 | M&L for Coloured joint free Non skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exc 0.18 sqm n.exc 0.38 sqm, in floors etc set and jointed in neat cement slurry and pointed with coloured cement to match the colour of tiles over and including screed bed or bedding layer of mortar 15 mm thick in CM 1:4 for laying floor finishes complete all as specified and as directed. |
| 14 | Taking down cement plaster of any description from wall/ceiling including raking out joints hacking for key, scrubbing down with water etc, complete all as specified and as directed. |
| 15 | M&L for Rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 and finishing the surface even and smooth without using extra cement, complete all as specificed and as directed. |
| 16 | M&L for 15mm thick rendering in two layers of 10mm thick backing coat inCM 1:6 and 5mm thick floating coat in CM 1:4 mixed with water proofing compound on all external wall surfaces/ RCC roof surface all as specified and as directed. (Note : Water proofing compound shall be measured and paid seperately) |
| 17 | Supply only water proofing compound (Powder) conforming to IS-2645 1975 complete all as specified and as directed. |
| 18 | M&L for Rendering 5 mm thick in CM 1:3 finished even and smooth without using extra cement on ceiling including cement slurry 3 kg/sqm complete all as specified and as directed. |
| 19 | M&L for Preparation of new plastered surface or unplastered surfaces of walls and cornices and applying two coats of oil bound distemper over a coat of primer complete all as specified and as directed. |
| 20 | M& L for Preparation of new plastered surface or unplastered surfaces of walls and applying two or more coatsof 100% Premium acrylic emulsion paint havingVOC less than 50 gm/litre and UV resistance as per IS 15489:2004 of weather coat(Exterior) all guard emulsion, any colour/tined over a coat of primer complete all as specified and as directed. |
| 21 | M & L for Preparation of new plastered surface or unplastered surfaces slab/ceiling etc and applying two coats of Oil bound distemper over a coat of primer complete all as specified and as directed. |
| 22 | M & L for Complete removal of old treated surface of ceiling/slab etc and applying two coats of Oil bound distemper over a coat of primer complete all as specified and as directed. |
| 23 | M & L for Preparation of old plastered surface or unplastered surfaces of walls and cornices and applying two coats of oil bound distemper over a coat of primer complete all as specified and as directed. |
| 24 | M&L for complete removal of old treated wall surfaces and applying two coats of weather coat (Exterior) walls with Acrylic Smooth exterior paint of required shade : (single or more coat applied @ 1.67 ltr/10 sqm over andincluding priming coat of exterior primerapplied @ 2.20 kg/10 sqm) all guard emulsion, any colour/tined over a coat of primer complete all as specified and as directed. |
| 25 | M&L for Preparation of old steel surface of any description over 10cm width or girth and applying one coats of synthetic enamel paint complete all as specified and as directed. |
| 26 | Taking down chowkats or frames with shutters area n.exc 1.5 Sqm each(without taking off shutters from the frame) complete all as specified and as directed. |
| 27 | Taking down chowkats or frames with shutters area exc 1.5 Sqm but n.exc 4.00 Sqm (without taking off shutters from the frame) complete all as specified and as directed. |
| 28 | Taking down shutters of any description n.exc 1.00 Sqm each complete all as specified and as directed. |
| 29 | Taking down shutters of any description exc 1.00 Sqm but n.exc 2 Sqm each complete all as specified and as directed. |
| 30 | Taking down shutters of any description n exc 1 Sqm each and refixing in same opening including taking down, easing and adjusting and also refixing builders hardware as required including renewal of unserviceable screws, etc. complete all as specified and as directed. |
| 31 | Taking down shutters of any description exc 1 Sqm and n exc 2 sqm each and refixing in same opening including taking down, easing and adjusting and also refixing builders hardware as required including renewal of unserviceable screws, etc. complete all as specified and as directed. |
| 32 | S & F Aluminium anodised (minimum anodisation is 15 microns) Door / window / Ventilator/partition frames and shutters (02 Nos glazed & gauzed), side hung type, without sash bars, standard aluminium grills, necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, handles, locking arrangement etc,including taking down aluminium door/window/Ventilator/partition frames and shutters all as specified and as directed by Engineer-in-charge.(Aluminium section shall be of make Jindal/Hindalco/ Indalco).(Note:- Weight of various Aluminium sections shall only be considered for measurement for payment. However cost of rubber packing given in the item shall be deemed to be included in the rate quoted. Glass panels,prelaminated particle boards, aluminium wire cloth as applicable will be measured and paid separately as supplied only & Item Such as hinges shall be considered under supply and fix items). |
| 33 | Supply only sheet glass, 4mm thick, ordinary quality and glazing with rubber packing around the glass, in square n.exc 0.5 Sqm in each pane complete all as specified and as directed. |
| 34 | Supply only Aluminium alloy wire mesh 0.45mm nominal dia of wire and average width of apeture 1.4mm fixed with aluminium wire staples etc.complete all as specified and as directed. |
| 35 | Supply only Prelaminatd particle board, 12 mm thick, exterior grade, prelaminated exterior grade on both sides with decorative choice lamination and fixed to aluminium frames complete all as specified and as directed. |
| 36 | S&F Sheet glass, 4mm thick, ordinary quality in squares n. exc 0.5 Sqm in each pane complete all as specified and as directed. |
| 37 | S&F Aluminium alloy wire mesh 0.45mm nominal dia of wire and average width of apeture 1.4mm fixed with aluminium wire staples etc.complete all as specified and as directed. |
| 38 | S&F Butt hinges, 75mm length extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed type C-21, complete all as specified and directed. |
| 39 | S&F Butt hinges, 100mm length extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed type B-21, complete all as specified and directed. |
| 40 | S&F Aluminium anodised barrel tower bolt of extruded section of size 150mm long complete all as specified and as directed. |
| 41 | S&F Aluminium anodised barrel tower bolt of extruded section of size 100mm long complete all as specified and as directed. |
| 42 | S&F Aluminium alloy, anodised, sliding door bolt 300mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed. |
| 43 | S&F Aluminium alloy anodised handles of size 150mm long extruded section fabricated type, complete all as specified and as directed. |
| 44 | S&F Aluminium alloy anodised handles of size 100mm long extruded section fabricated type, complete all as specified and as directed. |
| 45 | Demolition of unreinforced cement concrete in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) complete all as specified and as directed. |
| 46 | M&L for Plain cement concrete 1:3:6, type C2, (Using 40 mm graded stone aggregate), 75 mm thick as in plinth protection/Sub base flooring, finishing surface fair and even, in panels & filling joints with mortar, etc., complete all as specified and directed. |
| 47 | M&L for Plain cement concrete 1:3:6, type C2, 100mm thick (using 20mm graded stone aggreagte) as in Sub base flooring, finishing surface fair and even, in panels & filling joints with mortar, etc., complete all as specified and directed. |
| 48 | M & L for Coloured chequered cement concrete tiles 30 cm x 30cm x 25 mm thick, set and jointed neat cement slurry and pointed with with mixture of white & grey cement in equal proportions & no pigment, over and including 20 mm thick screed bed or bedding layer in cement mortar 1:4, etc. complete all as specified and as directed. |
| 49 | M&L for Removing loose and broken concrete by chiselling /picking etc upto a depth of 10 to 30 mm from floor/roof slab/chajjas and similar structural members cleaning the dismantled portion with wire brushes etc to remove dust, dirt and other foreign particles including necessary scaffolding etc and removal of debris to a distance not exceeding 50m, complete all as specified and as directed. |
| 50 | M&L for Application of high build polymer modified cement mortar 1:2.5, mixed with 3 kg SBR per bag of cement in ceiling surfaces 10 to 30mm thick in two layers surfaces over a coat of bonding agent Nito Bond SBR (1 Ltr SBR + 1 Ltr) water + 3 kg cement), complete all as specified and as directed. |
| 51 | Demolition of Precast concrete block walling, built in cement mortar including all quoins, arches, pillars, etc complete all as specified and as directed. |
| 52 | M&L for Precast cement concrete block masonry with PCC solid blocks in 1:2:4, type B-1 (using 20mm graded stone aggregates), exc. 10cm in width and set in cement mortar 1:6 complete all as specified and as directed. |
| 53 | M&L for Providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc, incl welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, incl fixing the railing with necessary accessories & stainless steel dash fasterners, stainless steel bolts etc, of required size, on the top of floor or the side of waist stab with suitable arrangement including dismantling of existing railing, complete all as specified and as directed |
| 54 | Taking down carefully aluminium/copper point wiring (light, fan, socket or power) DBs, light fittings complete offering credit, making good disturbed surfaces of walls, floors, etc, complete all as specified and as directed. |
| 55 | M&L for Point wiring complete with 1.5 sqmm single core FRLS PVC insulated and unsheathed cable 1100 volts grade with multistranded copper conductor drawn through and including PVC casing and caping and all accessories fixed to walls / roofs / floors / ceiling etc. and including provision of 1.5 sqmm copper cable green in colour as earth continuity conductor and connected to common earth dolly, including fabricated steel terminal box made out of 1.60mm thick MS sheet concealed in walls, with 3mm thick laminated sheet top cover for housing the switches, socket outlets, etc., complete all as specified and as directed for one light/ exhaust fan point controlled by one one way switch. |
| 56 | All as per Item Ser No.55.00 here - in - before but for one fan point controlled by one 5 Amps switch with 1.5 sq mm copper conductor cable. |
| 57 | All as per Item Ser No.55.00 here - in - before but for 3 pin switch socket outlet point 5 amps on independent board. |
| 58 | All as per Item Ser No.55.00 here-in-before but for 3 pin 15 Amps switch socket combination on independent board with 4 sq mm copper cable and provision of 4 sq mm FRLS PVC insulated stranded copper conductor cable for earth continuity conductor connected to common earth dolly connecting upto fittings complete all as specified and as directed. |
| 59 | S&F Switch piano flush button single pole oneway 5 amp complete all as specified and as directed. |
| 60 | S&F Switch socket combination 3 & 2 pin (multi pin) 5 amp flush type complete all as specified and as directed. |
| 61 | S&F Switch socket outlet multipurpose 3 pin 15 and 5 amp controlled by one switch, flush type complete all as specified and as directed. |
| 62 | S&F Ceiling rose surface bakelite 65x50mm 3 terminal complete all as specified and as directed. |
| 63 | S&F Fan speed regulator, electronic suitable socket type for single phase AC, 240 volts, 50 Hz,100 watts, complete all as specified and as directed. |
| 64 | S&F Aluminium housing LED batten 20/22 watt fitting 4ft in length nano diffuser technology to ensure minimum loss in light transmitted, long life of over 30000 hours including lamp and connecting with twin core shethed cable from fitting to ceiling rose complete all as specified and as directed. |
| 65 | S&F 36 W New generation energy saving & envoirmental friendly long life versatile pressure dia cast aluminium IP65 road way luminaire with high power LEDs as light and electronic driver complete with necessary brackets (made out of 25 mm bore GI light grade pipe approx. 0.6 M long) nuts, bolts etc to be fixed as on walls complete all as specified and as directed. |
| 66 | Taking down serviceable ceiling fan 1200 mm sweep by disconnecting the electric power supply, unscrewing the bolts and nuts, removing the blades including scrapping of old paint and applying two coats of synthetic enamelled white paint over a coat of red oxide primer complete and refixing back at site with new clamps, nuts, washers, safety wire of size not less than 1.00mm & bolts including cotter pin for complete all as specified and as directed. |
| 67 | S&F Exhaust fan suitable for on working of AC 230 V, 50 HZ 300 mm sweep 1200 RPM , with steel body , incl louvers complete all as specified and as directed. |
| 68 | S&F in Repair metal enclosure distribution board SPN, 8 way 240 volts, with 200 amps rated bus bar, with IP 42 protection and double door, suitable for mounting MCBs, including taking down old MCB/DB complete all as specified and as directed. |
| 69 | S&F in Repair MCB single pole 240 volts, 6 to 32 amps \\"B\\" series complete all as specified and as directed. |
| 70 | S&F Single pole and netural 240 Volts 40 amps complete all as specified and as directed. |
| 71 | M&L for Earthing complete with galvanised steel earth plate electrode 60cm x 60 cm x 6 mm thick buried directly in ground (earth pit not less than 2.25 M deep below ground level) with top edge of the plate not less thab 1.5 Meter below normal ground level connected to GI wire 4 mm dia by means of bolts, nuts , check nuts and washers of GI and GI tubing 20 mm bore light grade for earth lead protection up to main earth test point and including concrete foundation with PCC 1:3:6, type C1, Pre cast RCC 1:2:4, type B1, cover slab 54 x 54 x 5 cm with one handle for lifting made out of 8 mm dia MS bar, wire mesh, 20 mm bore GI tubing (LG) for watering, charcoal or coal and salt in alternate layers including earth work excavation complete all as specified and directed electrical plate No. 3 of SSR part - I |
| 72 | Supply, lay, test and commissioning under ground XLPE insulated and PVC sheathed, armoured heavy duty under ground cable, suitable for earthed system, laying in trenches/duct sleeving through pipe in duct, ISI marked with aluminium stranded conductor 1100 volt grade of cross section area 2 core 10 sq mm complete all as specified and as directed. |
| 73 | Excavation in trenches not exceeding 1.50m wide and n.exc 1.5m depth for foundation, laying of UG cables / pipeline etc or for shafts, wells, cesspits, manholes, pier holes etc not excluding 10 Sqm on plan in any type of soil and getting out , complete all as specified and as directed. |
| 74 | Returning, filling in, including spreading, leveling, watering and well ramming in layers n.exc. 25cm in any type of soil complete all as specified and as directed. |
| 75 | Removing surplus soil to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and as directed. |
| 76 | Supply & laying cable protection pipe of HDPE double wall corrugated (DWC) incl couplers,bends etc of size 50 mm OD and ID 38mm confirming to IS 14930 -II and ISI Marked complete all specified and as directed. |
| 77 | S&F Galvanised iron tube light grade (GI) with all fittings laid in trenches for the size of 50 mm bore complete all as specified and as directed. |
| 78 | M&L for cutting bituminous road at a width not more than 30cm and a depth not exceeding 60 cm for laying of pipes on road crossing for cable protection and making good with cement concrete 1:2:4, type, B-2 to match the existing surfaces of the road complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 16, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 07, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysOct 09, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender