Tender For Upgradation Of Dental Hygienist Surgery Room At Afids At Chaf Banglaore
Tender Value
Ref. Documents
Estimated cost
Bid Submission
19 Oct 2026
2 days left
EMD
9870
Bank guarantee accepted
Document Fee
300
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bengaluru Urban → Karnataka
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Upgradation Of Dental Hygienist Surgery Room At Afids At Chaf Banglaore
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 07-Oct-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 14-Oct-2026 |
| 2 | 14-Oct-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 19-Oct-2026 |
| 3 | 10-Oct-2026 | Tender Corrigendum | Other | 19-Oct-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Taking down of chowkats or frames exc 1.5 sqm but not exc 4 sqm each (without taking off shutters from the frames) and set aside or removing from site complete all as specified and as directed by Engr-in-charge. |
| 2 | Taking down chowkats or frames not exc 1.5 sqm each (without taking off shutters from the frames) and stacking at site where directed complete all as specified and as directed by Engr-in-charge. |
| 3 | Demolition of cement concrete (unreinforced) in ground floor and pavings not exc 15cm thickness below or above ground level and removing material from site of work complete all as specified and as directed by Engr-in-charge. |
| 4 | Demolition of brickwork or stone /boulder masanory, laid dry below or above ground level and removing material from site complete all as specified and as directed by Engr-in-charge. |
| 5 | Material and labour for precast cement concrete block masonry with solid blocks type C1, 1:3:6 (Using 20mm graded stone aggregate) exc 10 cm in width and setting in cement mortar 1:6 complete all as specified and as directed by Engr-in-charge. |
| 6 | Material and labour for providing pre-cast cement concrete solid building blocks or slabs 10cm thick (with plain or interlocking joints as directed) type C1, 1:3:6 (Using 20mm graded stone aggregate) and setting in cement mortar 1:4 in walls complete all as specified and as directed by Engr-in-charge. |
| 7 | Taking down cement plaster on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc., complete all as specified and as directed by Engr-in-charge. |
| 8 | Material and labour for 100mm thick cement concrete type D2, 1:4:8 (Using 40mm graded stone aggregate) in sub base of flooring or pavings etc., complete all as specified and as directed by Engr-in-charge. |
| 9 | Material and labour for 25mm thick PCC 1:2:4 type B-1 (Using 20mm graded stone aggregate) including finishing the surface even and fair complete all as specified and as directed by Engr-in-charge. |
| 10 | Material and labour for vitrified ceramic tiles light shade double charged 10mm thick (square/ rectangular) polished, area of each tiles exc 0.42 sqm but not exc 1.00 sqm, in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match, in in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match, including screed bed 15mm thick in CM 1:6 complete all as specified and as directed by Engr-in-charge. |
| 11 | Material and labour for glazed ceramic coloured tiles in vertical surfaces 450x300x7mm/ 600x300x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match, including 10mm thick rendering /backing coat in CM 1:4 complete all as specified and as directed by Engr-in-charge. |
| 12 | Use and waste of formwork to soffits of suspended slabs such as roof slabs, floorslabs, landings,chajjas and similar work; not exc 200mm thick (horizontal or sloping) in chajjas; flat rough finished surfaces of concrete complete all as specified and as directed by Engr-in-charge. |
| 13 | Material and labour for reinforced cement concrete type A1, 1:1.5:3 (Using 20mm graded stone aggregate) in beams, cantilevers, lintels over 1.5m span complete all as specified and as directed by Engr-in-charge. |
| 14 | Material and labour for reinforced cement concrete type A1, 1:1.5:3 (Using 20mm graded stone aggregate) in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed by Engr-in-charge. |
| 15 | Supply and fix for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia complete all as specified and as directed by Engr-in-charge. |
| 16 | Supply and fix for TMT bars 5mm dia and over upto and including 10mm dia in stirrups, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed by Engr-in-charge. |
| 17 | Material and labour for granite (of any type) stone tiles 18-20mm thick [table rubbed and polished] machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone in as in flooring and landings of stair case, treads including cutting and polishing of tiles and 20mm thick screed bed of cement mortar 1:6 complete all as specified and as directed by Engr-in-charge. |
| 18 | Providing and fixing powder coated aluminium (minimum thickness of powder coating 50 micron) frame work for doors, windows, ventilators and partitions (fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc., aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws complete all as specified and as directed by Engr-in-charge. |
| 19 | Providing and fixing powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows and ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc., aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing/ panelling, C.P. brass/ stainless steel screws complete all as specified and as directed by Engr-in-charge. |
| 20 | Supply only 4.80mm sheet glass, ordinary quality and glazing with glazing clips, rubber packing in square exc 0.5 sqm in each pane complete all as specified and as directed by Engr-in-charge. |
| 21 | Supply only 6mm thick veneered decorative ply wood, grade I (with BWR resin) decorative veneers on both faces complete all as specified and as directed by Engr-in-charge. |
| 22 | Supply and fix for mortice lock, brass 4 lever vertical type, size 100mm complete all as specified and as directed by Engr-in-charge. |
| 23 | Supply and fix for 200mm aluminium anodised barrel tower bolts of stove enameled black, with bright bolt and fixed complete all as specified and as directed by Engr-in-charge. |
| 24 | Supply and fix for 150mm brass handles, cast type, polished bright etc., complete all as specified and as directed by Engr-in-charge. |
| 25 | Supply and fix for aluminium (extruded section) body door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 kg and fixed complete all as specified and as directed by Engr-in-charge. |
| 26 | Material and labour for rendering 10mm thick in CM 1:3 in ceiling on concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed by Engr-in-charge. |
| 27 | Material and labour for rendering 15mm thick on brick work or concrete surface in cement mortar 1:6 and finished even and smooth without using extra cement complete all as specified and as directed by Engr-in-charge. |
| 28 | Material and labour for 15mm thick in CM 1:4 rendering on brick or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed by Engr-in-charge. |
| 29 | Material and labour for preparing new plastered surfaces and applying three coat of white wash on surfaces of ceiling complete all as specified and as directed by Engr-in-charge. |
| 30 | Material and labour for preparation of newly plastered surfaces of walls and applying through mechnical means two coats of oil bound distember (white or tined) over a coat of approved primer to obtain uniform surfaces including making good the surface complete all as specified and as directed by Engr-in-charge. |
| 31 | Material and labour for preparation of new or previously untreated plastered surfaces of walls etc., and applying two coats of cement base paint, a coat of chalk whiting primer white or tinted complete all as specified and as directed by Engr-in-charge. |
| 32 | Material and labour for framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walkways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed by Engr-in-charge. |
| 33 | Material and labour for preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and as directed by Engr-in-charge. |
| 34 | Providing and fixing false ceiling at all heights with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of Size 595x595mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC 0.50 to 0.75 as per IS 8225:1987, Non combustible as per BS 476 (part 4)-1970 and light reflectance of 476 (part 4)-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on interlocking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main-T runners of size 15x32mm of length 3000mm,cross-T of size 15x32mm of length 1200mm and secondary intermediate cross-T of size 15x32mm of length 600mm to form grid module of size 600x600mm, suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1m length and L shape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x24x0.40mm of length 3000mm to be fixed on periphery wall partition with the help of plastic rawl plugs at 450mm center to center and 40mm long dry wall wood screws. with semi perforated 12mm thick micro tegular edged GRG false ceiling tiles complete all as specified and as directed by Engr-in-charge. |
| 35 | Supply and fix for 18mm thick veneered decorative plywood, grade 1 (with BWR resin), with decorative face veneers on both faces incl sutiable hedge tape fixed with screws to timber frame work for built in cupboards, shelves, almirahs, etc., complete all as specified and as directed by Engr-in-charge. |
| 36 | Supply and fix for brass mortice lock, vertical type, size 100mm 4 levers include for escutcheon plates and two keys complete all as specified and as directed by Engr-in-charge. |
| 37 | Supply and fix for stainless steel clip on auto closing panel concealed hinges thickness 15-22mm for full overlay door 0 degree crank for cupboard door complete all as specified and as directed by Engr-in-charge. |
| 38 | Supply and fix for 100mm long extruded brass handles, fabricated type polished complete all as specified and as directed by Engr-in-charge. |
| 39 | Suppy and fix for 5mm thick frameless bevelled edge full length rectangular decorative wall dressing mirror of selected quality, mounted on walls fixed to plugs with chromium plated brass screws and cup washers complete all as specified and as directed by Engr-in-charge. |
| 40 | Supply and fix for towel rail 20mm dia chromium plated including 600mm long including brackets, screws and wooden /plastic cleats complete all as specified and as directed by Engr-in-charge. |
| 41 | Supply and fix for tubes, ‘medium grade’ galvanised, with all fittings and fixed complete to walls and ceilings or laid in floors of 20mm bore pipe line, including cutting holes or grooves in brick wall/ RCC and making good with cement mortar 1:3 complete all as specified and as directed by Engr-in-charge. |
| 42 | Supply and fix for tubes, ‘medium grade’ galvanised, with all fittings and fixed complete to walls and ceilings or laid in floors of 15mm bore pipe line, including cutting holes or grooves in brick wall/ RCC and making good with cement mortar 1:3 complete all as specified and as directed by Engr-in-charge. |
| 43 | Supply and fix for table top wash hand basin vitreous china, light colour /white of size 565x420x140mm including brass chromium plated waste coupling, chain, plug, porcelain rubber stopper, brackets, 32mm bore PVC waste pipe of appropriate length including making necessary connections complete all as specified and as directed by Engr-in-charge. |
| 44 | Supply and fix for stop valve /angle cock 15mm bore fancy type chromium plated screwed down high pressure, screwed both ends for iron pipe or for unions complete all as specified and as directed by Engr-in-charge. |
| 45 | Supply and fix for single lever wash basin mixer fancy type with capasten head chromium plated screwed down high pressure with without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts screwed for iron pipe complete all as specified and as directed by Engr-in-charge. |
| 46 | Supply and fix for 15mm bore PVC connection pipe 400mm long with PTMT nuts at both ends complete all as specified and as directed by Engr-in-charge. |
| 47 | Removing building materials etc., (other than spoil like bricks, stone, aggregate, stone slabs etc.,) to a distance of upto and incl 2000m, including loading, unloading and stacking at the destination complete all as specified and as directed by Engr-in-charge. |
| 48 | Material and labour for point wiring concealed type with 1.5 sqmm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed FRLSH copper conductor cable including continuous earth wire of size 1.5 sqmm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed, FRLSH copper conductor cable connected to common earth and earth dolly with suitable copper lugs drawing into and including rigid non-metallic PVC concealed conduit of 20mm dia or higher, medium grade complete with all PVC conduit accessories, including metal flush box of 1.60mm thick suitable for modular switches/ sockets/ fan regulators including modular white cover plate and modular metal flush box with frame of required modules at site, blanking plates, brass screws, cup washers etc., including all cutting /chasses etc., in stone/ brick masonary/ walls, pinning in stone walls /brick walls and pointing in cement mortar 1:3 to ends or edges of landing etc., for concealed conduit wiring using heavy duty stone drilling/ cutter machine and making good to the disturbed surfaces to match the existing surface of wall /ceiling using putty etc., as required complete all as specified and as directed by Engr-in-charge for the followings:- |
| 49 | One light point controlled by one, one way switch 06 Amps. |
| 50 | One ceiling fan point controlled by one, one way switch 06 Amps. |
| 51 | One 3/ 5 pin, 06 Amps socket outlet point on independent board controlled by one, one way 06 Amps switch. |
| 52 | One 3/ 5 pin, 06 Amps socket outlet point on same board controlled by one, one way 06 Amps switch. |
| 53 | All as per item No.48 here-in-before but point wiring with 2.5 sqmm single core FRLSH cables and earth continuity wire of 2.5 sqmm single core FRLSH cable for one 3 /6 pin 16 Amps socket outlet point controlled by one, one way switch on independent board complete all as specified and as directed by Engr-in-charge. |
| 54 | All as per item No.49 here-in-before but for one 3/6 pin, 16 Amps socket outlet point on same board controlled by one, one way 16 Amps switch complete all as specified and as directed by Engr-in-charge. |
| 55 | Supply and fix for modular switch, 6 Amps, single pole, one way, 230 volts, 1 module complete all as specified and as directed by Engr-in-charge. |
| 56 | Supply and fix for modular switch, 16 Amps, single pole, one way, 230 volts complete all as specified and as directed by Engr-in-charge. |
| 57 | Supply and fix for modular socket outlet 05 pin, 06 Amps, 02 module with shutter complete all as specified and as directed by Engr-in-charge. |
| 58 | Supply and fix for modular socket outlet 02 in 01, 3/6 pin, 16 Amps, 02 module with shutter complete all as specified and as directed by Engr-in-charge. |
| 59 | Supply and fix for ceiling rose, 65x50mm surface type with 3 terminals incl connection complete all as specified and as directed by Engr-in-charge. |
| 60 | Supply and fix for electronic ceiling fan regulator, stepped type of 0 to 05 rotary steps, electronic, 02 module, humfree, AC, 230 volts, 120 watts complete all as specified and as directed by Engr-in-charge. |
| 61 | Supply and fix for on surface/ wall mounted LED batten, 20 watt, 230 V, AC, 4 feet, white /warm white, robust extruded, decorative box type with intigrated electronic drive and accessories including connection complete all as specified and as directed by Engr-in-charge. |
| 62 | Supply and fix for ceiling recessed mounted LED panel type of size 2 ft x 2 ft, 36 W, 230 V, white /warm white type complete with driver full window glarefree opal diffuser LED panel with CRCA powder coated white housing complete with all accessories required for connection and making good the disturbed ceiling complete all as specified and as directed by Engr-in-charge. |
| 63 | Supply and fix for ceiling fan complete with three blades, down rod, accessories 230 V, 1200mm sweep, min air delivery 210 CFM, BEE 5 star rated with brushless direct current motor (BLDC) incl connection complete all as specified and as directed by Engr-in-charge. |
| 64 | Supply and fix for sheet metal enclosures with socket plug top and MCB, single pole and neutral enclosure with a 2 pin and earth plug and socket, modular type complete with one single pole MCB 20 Amps, 'C' curve, flushed /concealed to wall incl making good the disturbed surface and connection complete all as specified and as directed by Engr-in-charge. |
| 65 | Supply, installation, testing and commissioning of hi-wall mounting air cooled inverter split type air conditioner, indoor /outdoor units of 2.0 TR capacity, 5 star energy rating complete with cordless LCD remote control unit and with turbo cool, stabilizer free operation, energy saver, anti corrosive blue fins for protection in built air ioniser and plasma filter for better indoor air quality and the out door unit will be fixed in open space with proper foundation or on wall with proper fixing/ supporting stand arrangements including 3m suction and discharge refrigerant copper pipe line complete all as specified and as directed by Engr-in-charge. |
| 66 | Material and labour for cutting of existing stone masonry wall for crossing the suction, discharge pipe line and electric line connection of split type air conditioner and after the connection necessary cement work will be provided for making the surface as good complete all as specified and as directed by Engr-in-charge. |
| 67 | Supply and fix for copper tubing for refrigerant suction line of split AC of size 12.7mm drawn through pipes/ fixed to walls/ laid on floor or roof in all respects complete all as specified and as directed by Engr-in-charge. |
| 68 | Supply and fix for copper tubing for refrigerant suction line of split AC of size 6.35mm drawn through pipes/ fixed to walls/ laid on floor or roof in all respects complete all as specified and as directed by Engr-in-charge. |
| 69 | Supply and fix for heat insulation superior quality nitrile rubber of 9mm thickness, ISI marked for copper tubing of any size of refrigerant line including necessary clamps, PVC tape knots etc., complete all as specified and as directed by Engr-in-charge. |
| 70 | Supply and fix for AC drain hose outlet PVC pipe of standard size 20mm complete all as specified and as directed by Engr-in-charge. |
| 71 | Supply and fix for PVC insulated FRLSH copper conductor control cables of size 2.5 sqmm 4 core for outdoor to indoor unit connection for split AC complete all as specified and as directed by Engr-in-charge. |
| 72 | Supply and fix for bracket, floor /wall mounted of suitable size for outdoor unit of air conditioning complete all as specified and as directed by Engr-in-charge. |
| 73 | Taking down existing fire detectors with wire from ceiling /roof carefully and re-fixing in ceiling at its original /desired location/ position alongwith wire with necessary fixing, connection and testing complete all as specified and as directed by Engr-in-charge. |
| 74 | Material and labour for PVC insulated and round sheathed, red coloured copper two core 1.5 sqmm electrical control cable suitable for addressible fire alarm system and incl connection complete all as specified and as directed by Engr-in-charge. |
| 75 | Supply and fix for sheet metal enclosure DB, single pole and neutral with 200 Amps rated bus bar, 8 way, 230 volts, glazed, double door type, IP-43, including connecting all connections of wire to MCBs with proper lugs incl chases wall for fixing DB and making good to the disturbed surface complete all as specified and as directed by Engr-in-charge. |
| 76 | Material and labour for sub main wiring with 6 sqmm nominal cross sectional area, two single core, 1100 volts grade, multi-stranded, PVC insulated, unsheathed, FRLSH copper conductor cable with and including continuous earth wire of size 6 sqmm nominal cross sectional area, single core, 1100 volts grade, multi-stranded, PVC insulated, unsheathed, FRLSH copper conductor cable drawing into and including rigid non-metallic PVC concealed conduit not less than of 20mm dia, medium grade with all conduit accessories and connected to common earth dolly with suitable copper lugs including all cutting /chases, pinning etc., in stone/ brick masonary/ walls and making good to the disturbed surfaces to match the existing complete all as specified and as directed by Engr-in-charge.Note: One run of earth continuity conductor, one run of PVC conduit concealed in wall and two run of copper conductor together taken as one length for measuring unit length. |
| 77 | Material and labour for sub main wiring with 4 sqmm nominal cross sectional area, two single core, 1100 volts grade, multi-stranded, PVC insulated, unsheathed, FRLSH copper conductor cable with and including continuous earth wire of size 4 sqmm nominal cross sectional area, single core, 1100 volts grade, multi-stranded, PVC insulated, unsheathed, FRLSH copper conductor cable drawing into and including rigid non-metallic PVC concealed conduit not less than of 20mm dia, medium grade with all conduit accessories and connected to common earth dolly with suitable copper lugs including all cutting /chases, pinning etc., in stone/ brick masonary/ walls and making good to the disturbed surfaces to match the existing complete all as specified and as directed by Engr-in-charge.Note: One run of earth continuity conductor, one run of PVC conduit concealed in wall and two run of copper conductor together taken as one length for measuring unit length. |
| 78 | Supply and fix for sheet metal enclosure, double door type for MCB TPN DB, 4 way, vertical type, 415 volts with 200 Amps rated busbar and neutral link, chases /cutting on wall any type for fixing DB and making good distributed wall surfaces to match with existing complete all as specified and as directed by Engr-in-charge. |
| 79 | Supply and fix for MCB TPN, 63 Amps, 415 Volts, AC of breaking capacity 10 KA, 'C' curve and connections by using suitable copper lugs complete all as specified and as directed by Engr-in-charge. |
| 80 | Supply and fix for MCB SPN, 40 Amps, 240 Volts, AC of breaking capacity 10 KA, 'C' curve and connections by using suitable copper lugs complete all as specified and as directed by Engr-in-charge. |
| 81 | Supply and fix for MCB SP, 240 Volts, AC of breaking capacity 10 KA, 'C' curve and connections by using suitable copper lugs complete all as specified and as directed by Engr-in-charge of following rating:- |
| 82 | 10 to 32 Amps |
| 83 | 40 Amps |
| 84 | Material and labour for earthing complete with galvanised steel earth plate electrode 600x600x6mm thick, buried directly in ground (earth pit not less than 2.25m deep below ground level) with top edge of the plate not less than 1.5m below normal ground level, connected to galvanised earth lead wire 4mm dia as earth lead by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point or indiacted including earthwork, char coal , salt and Earth wire and GI protection Pipe of required length including testing on completion complete all as specified and as directed by Engr-in-charge. |
| 85 | Material and labour for earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit /pipe or fixed for earthing etc., of size 4mm dia galvanised iron or steel wire complete all as specified and as directed by Engr-in-charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 14, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Oct 14, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Completed
Oct 19, 2026
18:00 IST
Corrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 2 days
Oct 19, 2026
18:00 IST
Corrigendum-3 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 2 daysOct 19, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysOct 21, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender