Tender For special Repair Of Bldg No P-12 & P-13 (01 T0 12) Or Md Accn At Bikaner Lines In Mil Stn Damana Under Ge Jammu
Tender Value
1.24 Crore
Estimated cost
Bid Submission
14 Oct 2026
10 days left
EMD
1.99 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jammu → Jammu and Kashmir
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special Repair Of Bldg No P-12 & P-13 (01 T0 12) Or Md Accn At Bikaner Lines In Mil Stn Damana Under Ge Jammu
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 25-Sep-2026 | CORRIDENDUM No-01 | BOQ | 14-Oct-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of brick work built in cement mortar incl all quoins arches pillars etc.etc. complete all as specified and directed. |
| 2 | M&L Brick work with sub class ‘B’ bricks straight or curved on plan exc. 6 mtr mean radius built in CM(1:6) etc. complete all as specified and directed. |
| 3 | Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for and complete removal of debris outside MD land.etc. complete all as specified and directed. |
| 4 | M&L Plain cement concrete 1:2:4, type B0 (12.50mm graded aggregate) 25mm thick as in sub base for floor tiles etc. complete all as specified and directed. |
| 5 | Dismantling floors hearth or wall tilling including cement mortor bedding (but not backing) removing unserviceable materials outside MOD area and rubbish off the premises etc. complete all as specified and directed. |
| 6 | M&L for Providing water proofing treatment to Sunken floors all as given below :-(a) Making fillet of size 25mm x 25mm at corner of slab and wall with polymer modified cementitious (PMC) mortar consisting of one part of tapecrete P-151, two parts of cement and 6 parts of fine sand by weight. (b) Sealing of joints of pipe with epoxy putty or epoxy mortar. (c) Cleaning the concrete surface by brushing & watering and applying a coat of tapecrete P-151 Acrylic Polymer Modified cementitious slurry consisting of one part of Acrylic based polymer modified cementitious flexible compostie coating and two parts of cement by weight. The coating shall be carried out upto 300mm above FFL and shall be allowed to dry for 4-6 hours. (d) Appying a coat of Acrylic based polymer modified cementitious flexible compostie coating brush topping 1.5mm thick consisting of one part of Acrylic based polymer modified cementitious flexible compostie coating, two parts of cement and two parts of silica sand by weight and cured to 2 days. (e) Applying 15mm thick plaster in CM 1:4 mixed with WPC @100ml per 50 Kg cement on treated surface. (f) PCC 1:5:10 type E2 in sunken area. etc. complete all as specified and directed. |
| 7 | M&L Non - skid coloured Ceramic tiles 6 to 7 mm thick (square/ rectangular) as in floor, area of each tile n.exc 0.36 sqm, set and jointed and laid with 3-4mm spacers set and jointed in neat Polymer modified tile adhesive of appropriate grade as per manufacturar instructions and including screed bed or bedding layer of mortar 15 mm thick in CM (1:6) for laying floor finishes.etc. complete all as specified and directed. |
| 8 | M&L Non - skid coloured Ceramic tiles 6 to 7 mm thick (square/ rectangular) as in verticle surface etc, laid with 3-4mm spacers set and jointed in neat Polymer modified tile adhesive of appropriate grade as per manufacturar instructions and incl 10mm thick screed bed or bedding layer of mortar in CM 1:4.etc. complete all as specified and directed. |
| 9 | M&L Non - skid coloured Ceramic tiles 6 to 7 mm thick (square/ rectangular) as in floor, area of each tile n.exc 0.18 sqm, set and jointed and laid with 3-4mm spacers set and jointed in neat Polymer modified tile adhesive of appropriate grade as per manufacturar instructions and including screed bed or bedding layer of mortar 15 mm thick in CM (1:6) for laying floor finishes.etc. complete all as specified and directed. |
| 10 | M&L Coloured glazed ceramic tiles glossy finish of size 450x300x 5-6mm thick in dado’s/skirting etc. laid with 3-4mm spacers set and jointed in laid with 3-4mm spacers set and jointed in neat Polymer modified tile adhesive of appropriate grade as per manufacturar instructions and incl 10mm thick screed bed or bedding layer of mortar in CM 1:4 as in verticle surface etc to match, pattern, laying etc of tiles and Shade, Colour shall be decided by Engr in Charge complete all as specified. |
| 11 | Demolition of stone slabs and tiles of any description or thickness in floors/ walls laid bedded and pointed in any mortar etc. |
| 12 | M&L Machine cut Kota stone slab flooring 18-20mm thick as in floor, splash stone to match the shade of the slab including 20 mm screed bed CM 1:6 including rubbing polishing complete all as specified and directed. |
| 13 | S&F Machine cut Kota stone slab 18-20mm thick over 10 mm thick as in vertical surface over rendering in CM 1:4 laid and jointed with grey cement slury mixed with pigment to match the shade of the slab incluiding rubbing and polishing complete all as specified and directed by Engineer –in-Charge. |
| 14 | M&L 15mm-16mm Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and incl Screed bed or bedding layer of mortar 20mm thick in CM 1:4 complete all as specified and directed. |
| 15 | Providing edge moulding to 15mm-16mm thick Granite stone of counters vanities etc. including machine polishing to edge to give high gloss finish etc. complete all as specified and directed. |
| 16 | Taking down chowkats or frames with shutters (w/o taking off shutters from the frames) not exc 1.5 sqm each, including cutting holes for taking out holdfasts or dismantling brick work(holes cut and any other damage to jambs, walls for taking out holdfasts shall be finished identical to existing finish (without any extra cost to Govt), & removing from site all as specified and directed by Engr-in-charge |
| 17 | Taking down chowkats or frames with shutters (w/o taking off shutters from the frames) exc 1.5 sqm and not exc 4 sqm each, including cutting holes for taking out holdfasts or dismantling brick work(holes cut and any other damage to jambs, walls for taking out holdfasts shall be finished identical to existing finish (without any extra cost to Govt), & removing from site all as specified and directed by Engr-in-charge |
| 18 | Taking down shutters of any description exc 1 sqm and n exc 2 sqm each complete all as specified and directed by Engr-in-Charge |
| 19 | S&F Pressed steel frames (factory made) made out of 1.25 mm thick black MS sheet for doors with one or more rebates including necessary fixing lugs, hinges(125mm), lock strike plate, etc., complete size of frame 105x60mm incl bottom of each chowkat to be welded with 2 Nos 25x25x3mm thick flat iron projecting 10 cm on either side complete all as specified and directed. |
| 20 | All as per Item 19 above but size of frame 125X60mm for fixing of two shutters complete all as specified and directed. |
| 21 | M&L Cement concrete (1:3:6) type C0 using 12.5mm graded stone aggregate filling in pressed steel chowkats bed block for holdfast and the like complete all as specified and directed. |
| 22 | M&L Preparation of New Steel surfaces of any description, over 10cm in width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of primer.etc. complete all as specified and directed. |
| 23 | M&L for 35 mm thick Flush shutter, solid core contruction, with block board core and plywood face panels commercial type on both side fitted to chowkats complete all as specified and directed |
| 24 | S&F 35mm thick Factory made 2nd class hard wood, glazed and skelton shutter open rebated and prepared to receive glass, guage, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut & mitred beads for securing glass etc. sizes of members of shutters as specified in SSR 2009 Pt-I Section 8.24(b) supplied and fitted to chowkhats, all as specified. |
| 25 | S&F Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks,or galvanised wire staples etc. complete all as specified and directed. |
| 26 | M&L Preparation of New Wooden surfaces over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer etc. complete all as specified and directed. |
| 27 | S&F Powder coated aluminium three track sliding window (02 glazing & 01 gauze shutter) with frame using standard medium weight jindal sections of weight not less than 0.59 Kg/m including glazing with 5.5 mm thick sheet glass fixed 50 micron thick solar cantrol film and stainless steel wire cloth (1.40 oprature and 0.63mm dia) aluminium snap beadings, 10mm dia deco aluminium anodised grill DG-102 and F or C chennel, fixing grill screws etc, with mesh size 75 mm and aluminium complete all as specified & directed. |
| 28 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/window/Ceosetory windows & other Frames/Chowkhat of size 45x70 mm (+5 mm) comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate andnatural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge |
| 29 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with Butt hinges of required size with necessary full body threaded star headed counter sunk screws, all as per direction of Engineer- In- Charge. (Note: Butt hinges and necessary screws shall be paid separately) |
| 30 | S&F in repairs 18mm thick factory made 100% solid WPC flush shutter (for cupboard and vanity etc) made from co-extruded three layer rigid foam sheet (single extruded) with 0.8 to 1 mm thick outer layer having density not less than 1400 kg/cum and density of central core not less than 600 kg/cum manufacturer by an ISO 9001/2015 certified company complete all as specified and directed. |
| 31 | S&F Modular Auto concealed soft closed hinges 35mm, any degree size fixed to cupboard complete all as specified and as directed. |
| 32 | S&F 100mm Hasp and staple, mild steel, wire type, stove enamelled black, including bolt to hinge plate and fixed with screws etc. complete all as specified and directed. |
| 33 | S&F Butt Hinges extruded aluminium alloy with galvanised mild steel hinge pin, anodised 100 mm long complete all as specified. |
| 34 | S&F Aluminum anodised bow handle fabricated type extruded section of 150mm long complete all as directed |
| 35 | S&F Aluminum anodised barrel tower bolts of extruded section 150mm long complete all as specified and as directed. |
| 36 | S&F 300 mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed |
| 37 | S&F Mild steel helical door spring 300mm including roller and roller plate complete fixed with welding to existing steel chowkhats all as specified and directed. |
| 38 | S&F 150 mm over all length of cover plate of floor Door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring fixed in floor,complete all as specified and as directed by Engr-in-charge. |
| 39 | S&F Magnet catcher 50 mm size for kitchen cupboard shutter complete all as specified and directed. |
| 40 | S&F in repairs Curtain rod of stainless steel 20mm dia and side capes fixed in position by drilling holes in walls and fixed the brackets with rawl plug and steel screw complete all as specified as directed by Engineer-in-Charge |
| 41 | Dismantling PVC water tank/demolition of RCC water storage tanks of capacity exc 250 but n.exc 500 ltrs and removing from site.etc. complete all as specified and directed. |
| 42 | S&F Rotational moulded polyethene water storage tanks 500 lit capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR part-I, including 20mm Ball Valves, 20mm Tank nipple, complete all as directed by Engr-in- Charge. |
| 43 | S&F in repairs 25mm outer dia CPVC gate valves all as directed by Engineer in charge. |
| 44 | S&F 20mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on concealed in wall and ceiling or laid in floor complete with all fittings (such as bends, elbows, Tee short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) inlcuding taking down 15mm steel tubing complete all as specified. |
| 45 | S&F 25mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on concealed in wall and ceiling or laid in floor complete with all fittings (such as bends, elbows, Tee short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) inlcuding taking down 20mm steel tubing complete all as specified. |
| 46 | S&F in repairs Sinks with drainage board made of stainless steel 1.00mm thick kitchen or laboratory with plugs,washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete with CP waste coupling & PVC waste pipe complete all as specified and directed by Engineer-in-charge. |
| 47 | S&F in repairs Kitchen stainless steel plate rack made out of 1.00mm thick sheet and having partions as per sample. The over all size (750x600x250mm) fixed with steel fastners or steel screw complete all as specified and as directed. |
| 48 | S&F in repairs Vitreous china Pedestal type water closet white, with 'P' or 'S' trap including soft closing seat cover, closed pattern with flat bottom,complete all as specified and as directed. |
| 49 | S&F in repairs 10 ltr capacity PVC Low level flushing cistern including 32mm dia PVC flush pipe, fixing in position with PVC connection pipe of 15mm x 450mm long etc complete. |
| 50 | S&F in repairs Vitreous China Wall hang Corner Wash Hand Basin, size 400 X 400 x 195mm including 32mm bore PTMT Waste coupling , waste pipe complete all as specified and as directed. |
| 51 | S&F 600mm x 450mm beveled edge mirror of selected quality, glass 5mm thick, mounted on 6mm thick commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 52 | S&F in repairs 15mm bore Wall mixer non telephonic shower arrangement with connecting legs and wall flanges, cast copper alloy, chromium plated, complete all as specified and as directed. |
| 53 | S&F in repairs 15mm bore Wash Basin Mixer with 450mm Long Braided Hoses complete all as specified and as directed. |
| 54 | S&F in repairs 15mm bore Sink Mixer swan neck with Swinging Spout (Wall Mounted Model) with Connecting Legs & Wall Flanges complete all as specified and as directed. |
| 55 | S&F in repairs 15mm bore Bib taps CP fancy type, cast copper, screwed down, screwed for iron pipe or for brass ferrule and fixed etc. complete all as specified and directed. |
| 56 | S&F in repairs Angle cock with wall flange, cast copper alloy, chromium plated fancy type screwed for 15 mm iron pipe, complete all as specified and as directed. |
| 57 | S&F in repairs brass chromium plated shower rose 125mm size with or without swivel joints any size including fixing to steel pipe of 15mm bore all as directed by Engineer in charge. |
| 58 | S&F in reparis Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.0 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. |
| 59 | S&F in repairs Tubular towel rail 20mm dia D type 60cm long between flanges chromium plated all as specified and directed. |
| 60 | S&F in repairs Corner Glass Shelf 5.5 mm thick (300x300mm) chromium plated guard and railing(with Bracket) as per directed by Engr-in-charge. |
| 61 | S&F in repairs 110mm dia PVC (SWR) pipes single socketed in any length with rubber joints fixed to walls / floor etc complete. |
| 62 | S&F in repairs 75mm dia PVC (SWR) pipes single socketed in any length with rubber joints fixed to walls / floor etc complete. |
| 63 | M&L in repairs PVC (SWR) floor trap 75mm dia plain with grating including jointing with solvent cement etc complete. |
| 64 | S&F in repairs PVC (SWR) Bends 110mm bore any radius with access door |
| 65 | S&F in repairs PVC (SWR) Bends 75 mm bore any radius with access door |
| 66 | S&F in repairs PVC (SWR) Tee 110mm bore any radius with access door |
| 67 | S&F in repairs PVC (SWR) Tee 75 mm bore any radius with access door |
| 68 | S&F in repairs PVC (SWR) vent cowl 110mm bore |
| 69 | S&F in repairs PVC (SWR) vent cowl 75mm bore |
| 70 | Taking down Cement Plaster of any description on Brick Walls, Concrete Surfaces including Racking out Joints, hacking for Key, scrubbing down with Water, etc. complete removal of debris outside MD land. (Including all necessary scaffolding lifiting arrangement up to 12 mtr height). |
| 71 | M & L rendering cement plaster 10 mm thick in CM 1:3 on concrete surfaces as in ceiling and finished the surface fair and even without using extra cement complete all as specified and directed. |
| 72 | M&L Rendering 10mm thick on fair faces of brick work or concrete surface in CM 1:6 surface finished even and smooth without using extra cement.etc. complete all as specified and directed. |
| 73 | M&L Rendering 15mm thick in CM 1:4 in on fair faces of brick surface finished even and fair including water proofing compound all as specified. (Including all necessary scaffolding lifiting arrangement up to 12 mtr height).etc. complete all as specified and directed. Please Enable Macros to View BoQ information |
| 74 | M&L Rendering 15mm thick in CM 1:4 in on fair faces of brick surface finished even and fair including water proofing compound all as specified. (Including all necessary scaffolding lifiting arrangement up to 12 mtr height).etc. complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 25, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Oct 14, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 10 daysOct 14, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender