Tender For Special Repair To Bldg No T-12 Including Toilet Block At Anarwala Garhi Cantt Under Ge(P) Dehradun
Tender Value
68.01 Lakhs
Estimated cost
Bid Submission
05 Oct 2026
10 days left
EMD
1.27 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Dehradun → Uttarakhand
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repair To Bldg No T-12 Including Toilet Block At Anarwala Garhi Cantt Under Ge(P) Dehradun
BOQ
| Sl. No. | Item Description |
| 1 | Taking down chowkhats or frames area not exc. 1.50 Sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed. |
| 2 | Taking down chowkhats or frames area exc. 1.50 Sqm but not exc. 4.00 Sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed. |
| 3 | Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc.complete all as specified and directed. |
| 4 | Demolition of brick work or stone / boulder masonry including all quoins, arches, pillars, etc. built in cement mortar or cement lime mortar complete all as specified and directed. |
| 5 | Demolition of Concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 6 | Demolition of reinforced cement concrete in any position and any description including cutting of reinforcement bars to facilitate demolition complete all as specified and directed. |
| 7 | Dismantling of any size cast iron or reinforced concrete drain pipe, jointed in cement mortar, fixed withj wall and taking out of trenches, if required complete all as specified and directed. |
| 8 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in any type soil complete all as specified and directed. |
| 9 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cm thick in each layer as in soil complete all as specified and directed. |
| 10 | Excavation in post holes (or similar holes) each not exc. 0.50 Cum, getting out, returning, filling and ramming earth or broken rubble mixed with earth around in layers not exc. 25 cm watering and removing surplus soil to a distance not exc. 50 m and making good surface as in hard / dense soil complete all as specified and directed. |
| 11 | Removing surplus excavated material (SOIL) to distance not exc. 50 m and depositing where directed at a level not exc. 1.50 m above the starting point complete all as specified and directed. |
| 12 | M & L for anti-termite treatment by treating the soil along with external perimeter of building at the rate of 2.25 litre of emulsion per metre of the perimeter wall, complete all as specified & directed. |
| 13 | M&L for ATT Post construction treatment of soil under existing floor using emulsion as per manufacturer instruction @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floor complete all as specified. |
| 14 | Taking down cement or cement lime plaster from brick or stone walls etc. including raking out joints, hacking for keys, scrubbing down with water etc. complete all as specified and directed. |
| 15 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) including removing the rubbish off the premises complete all as specified and directed. |
| 16 | Dismantling of water tank exc. 500 Litre but not exc. 1000 Litre capacity complete all as specified and directed. |
| 17 | M & L for providing plain cement concrete, type D-2, 1:4:8 (using 40 mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed. |
| 18 | M & L for providing plain cement concrete type B-1, 1:2:4, (using 20 mm graded stone aggregate), as in benching,water throughts etc and the like including weathering, slightly rounded or chamfered angles & throating as directed including necessary form work as required complete all as specified and directed. |
| 19 | M & L for providing pre-cast cement concrete landing, cover slabs, chullah hoods, chajjas, shelves and similar items with plain faces in cement concrete 1:2:4 type B-1, using 20 mm graded stone aggregate and setting in cement mortar 1:4 complete all as specified and directed. |
| 20 | M & L for brick work with sub class ‘B’ old size bricks straight or curved on plan exc. 6.00 m mean radius built in cement mortar 1:4 complete all as specified and directed. |
| 21 | M & L for brick work with sub class ‘B’ old size bricks straight or curved on plan exc. 6.00 m mean radius built in cement mortar 1:6 complete all as specified and directed. |
| 22 | Cutting chases, pinning in, making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, lintels, shelves etc, and cutting chases for concealed water tubing or concealed conduit wiring etc, and making good on brick walls, cutting not exc. 20 cm in girth complete all as specified and directed. |
| 23 | Supply & fixing factory made single extruded WPC(Wood polymer composite) Solid door frame/ chowkat of size 100X50 comprising of virign PVC polymer of K value 58-60 (suspension grade ) calcium corbonate and natural fibers ( wood powder/rice husk /wheat husk) and non toxic additives (max toxicity index of 12 to 100 gms) fabricated with mitred joints and applying PVC solvent cement and screwed with full body threaded star headed SS screws having min frame density of750Kg/cum screw withdrawal strength of 2200 N (face) & 1100 N edge,minimum compressive strength of 58 N/mm2, moduus of elasticity 900N/mm2 and resistance to spread of flame of class 'A' category with property of being termite / borer proof, water / moisture proof & fire retardant & fixed in postion with SS dash fasterns / hold fast of required dia and length,colour of door frame to match that of shutter, complete all as specified and directed.NOTE:- Material test certificate and authentication should be compulsory provided by the manufacturing company. |
| 24 | Supply & fixing factory made single extruded WPC(Wood polymer composite) Solid door frame/ chowkat of size 65X125 comprising of virign PVC polymer of K value 58-60 (suspension grade ) calcium corbonate and natural fibers ( wood powder/rice husk /wheat husk) and non toxic additives (max toxicity index of 12 to 100 gms) fabricated with mitred joints and applying PVC solvent cement and screwed with full body threaded star headed SS screws having min frame density of750Kg/cum screw withdrawal strength of 2200 N (face) & 1100 N edge,minimum compressive strength of 58 N/mm2, moduus of elasticity 900N/mm2 and resistance to spread of flame of class 'A' category with property of being termite / borer proof, water / moisture proof & fire retardant & fixed in postion with SS dash fasterns / hold fast of required dia and length,colour of door frame to match that of shutter. complete all as specified and directed.NOTE:- Material test certificate and authentication should be compulsory provided by the manufacturing company. |
| 25 | S&F factory made single extruded WPC (Wood polymer Composite) Solid moulded Flush Door Shutter of 35 mm thick, prelaminated on both faces, comprising of virgin PVC resin of K value 58-60 (Suspension Grade), Calcium Carbonate and natural Fibers (Wood Powders/ rice husk/ wheat husk) and Non toxic additives (max toxicity index of 12 for 100 gms) having min density of 650 Kg/Cum and screw withdrawal strength of 1800 N (Face) &900 N (Edge) Minimum Compressive Strength of 50 N/mm2, Modulus of elasticity 850N/mm2 and resistance of spread of flame of class A category with property of being Termite/ Borer proof. Water/ Moisture Proof, Fire retardant and fixing with stainless steel but hinges(ISI marked) of required size with necessary full body threaded star headed counter sunk SS Screws.complete all as specified and directed. NOTE:- Material test certificate and authentication should be compulsory provided by the manufacturing company. |
| 26 | S&F for 30 mm thick factory made solid WPC (Wood Plastic Composite) gauged door shutter prelaminated on both side with wiremesh in three number of division with brown wood grain texture including SS wire mesh fixed with (15 x 15)mm square tubes inside rails with screwing 8x28 heat metal zinc coated screws that can be removed or fixed again after changing of wiremesh when needed covered with moulding beading. The density of the WPC material shall be as per manufacturer instructions complete all as specified and directed. NOTE:- Material test certificate and authentication should be compulsory provided by the manufacturing company. |
| 27 | Providing and fixing factory made uPVC white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware, EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware. Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. (Note: The unit rate quoted by contractor includes 5.5mm thick plain glass and includes all other connected accessories. Net Opening will be measured for payment purpose.) Area not exceeding 2.00 Sqmm each.complete all as specified and directed. |
| 28 | S&F Stainless steel (ISI marked), sliding door bolt size 300 mm dia not less than 12mm with hasp, staple (bolt ype) and fixing clips complete all as specified and directed |
| 29 | S&FStainless steel (ISI marked), 150 mm long handle complete all as specified and as directed |
| 30 | Stainless steel (ISI marked) 200 mm long tower bolt of extruded section complete all as specified and directed. |
| 31 | S & F of aluminum (die cast) body door closer hydraulically regulated,designation No. 3,universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed. |
| 32 | S & F of 150 mm size (Overall length of cover plate) floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring complete all as specified and directed. |
| 33 | S & F for stainless steel glossy finish hat peg set of five tier with necessary fitting complete all as specified and directed. |
| 34 | S&F in repairs stainless steel decorative curtain rod of 25 mm bore including supporting brackets 02 nos, finnale 02 nos) etc complete all as specified and as directed |
| 35 | M & L for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns and binding with and including mild steel wire (annealed) not less than 0.9 mm dia securing with clips complete all as specified and directed. |
| 36 | S & F of mild steel framed work such as gate grills, gratings etc. with ends of bars shouldered and / or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railing, frame work of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed. |
| 37 | S & F of rolled mild steel sections as in roof trusses (framed), trussed, purlins, crane gantry, rails, fastening, heavy bracket framing (Beam, tee, angle, channel or flat section), including distance pieces, cleats etc. confirming to Fe 410 -W(Gde-E- 250) quality-A including cutting, welding etc. complete all as specified and directed. |
| 38 | M&L in repair 595 mm X 595mm false ceiling system , using hot dipped galvanised steel section exposed surface with precoated capping, GI powerd coated tee and cross tee of size 24x32mm & 24x27mm having 0.27mm gauge at every 600mm c/c interval and wall angle of size 19x19mm having 0.35mm gauge fixed to the wall. The above grid is tobe suspended at every 1200mm c/c in both direction using 2mm thick pre-straightened GI wire laying designer tile ivory painted (high pressure steam cured) of 4 mm thickness (as per IS 14862) of size 595x595 mm and ant ine of the design (cascadev or electra) , back of the tile duly sanded and finished with a coat of protective paint over the formed grid etc complete all as specified and directed. Note : Grid & board of ceiling shall be of same make. |
| 39 | S&F in repair Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame including Fillets of size 35x5 mm complete all as specified and directed. |
| 40 | M & L 16 to 18 mm thick granite(Zed Black colour as approved by GE) stone slab machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing as in kitchen platform/dado/skirting /plateform counter top WHB including cutting holes for oval shape /urinal partitions etc. including 15 mm thick cement screed bed 1:6 CM in horizontal or vertical surfaces including grinding the edges half round and polishing complete all as specified and directed. |
| 41 | M &L 25mm thick rough dressed red sand stone slab in plinth protection, bedded and jointed in cement mortar 1:6 & pointed in cement mortar 1:3 over 20mm thick screed bed in cement mortar (1:6) over 75mm thick PCC (1:4:8) type D-2 using 40mm crushed stone aggregate complete all as specified and directed.. |
| 42 | M & L for 75 mm thick cement concrete 1:4:8 type D-2, using 20 mm graded stone aggregate as in sub base finished fair complete all as specified and directed. |
| 43 | Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc, and brushing neat cement slurry with 3.0Kg of cement per square metre, complete all as specifed & directed. |
| 44 | M & L for25 mm thick cement concrete type B-0, 1:2:4 (using 12.50 mm graded stone aggregate) as in levelling course of floor finishes, finished even and rough complete all as specified and directed. |
| 45 | S & F for coloured Vitrified double charged tiles 7 to 8 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. NOTE: - SCREED SHALL BE MEASURED AND PAID SEPARATELY. |
| 46 | S & F for coloured Vitrified double charged tiles 7 to 8 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, as on vertical surface of wall such as skirting, dado, riser etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. NOTE: - RENDERING SHALL BE MEASURED AND PAID SEPARATELY. |
| 47 | M & L for Glazed ceramic coloured tiles in vertical surface 300x 450x 7 mm thick ,on ventical surface as in skriting , dado set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. NOTE: - RENDERING SHALL BE MEASURED AND PAID SEPARATELY. |
| 48 | M&L Stone finished wall tiles coloured 300mmx 450mm , 7 to 8 mm thick, set and jointed in neat cement slurry and pointed in white or colour cement to match,on ventical surface as in skriting , dado set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. NOTE: - RENDERING SHALL BE MEASURED AND PAID SEPARATELY. |
| 49 | M & L Non - skid joint free ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. NOTE: - SCREED SHALL BE MEASURED AND PAID SEPARATELY. |
| 50 | M & L for 15 mm thick rendering on fair faces of brick work or concrete surfaces with cement mortar 1:4 finished even and smooth (without using extra cement)complete all as specified and directed. NOTE:- Integral water proofing compound shall be measured & paid seprately. |
| 51 | M & L for 15 mm thick rendering on fair faces of brick work or concrete surfaces with cement mortar 1:6 finished even and smooth without using extra cement using integral water proofing compound as per manufacturer,s instructions , complete all as specified & directed. |
| 52 | Supply only water proofing compound ( (Liquid) complete all as specified. |
| 53 | M & L for 15 mm thick screed bed or bedding layer in cement mortar 1:4 for laying floor finishes finished even and rough complete all as specified and directed. |
| 54 | M & L for 10 mm thick cement plaster on fair faces of brick work or concrete surfaces in cement mortar 1:4 on vertical surfaces of wall finished even and rough suitable for laying wall tiles complete all as specified and directed. |
| 55 | M&L for one coat of acrylic waterbased interior grade primer @ 0.8 ltr (undiluted)/10 sq mtrs diluted with water in 1:1 ratio to be applied with fully automatic airless spray machine of paint aplication with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI. Allow 6-8 hrs to dry the surface for painting of subsequent coats.complete all as specified and directed. |
| 56 | M&L for two coat water based premium acrylic smooth exterior emulsion of approved colour with silicon additive & Color stay technology, excellent dirt pick up resistance with low VOC less than 50 gram/litre as per the LEEDS specifications Anti algal properties in two coats @ 1.79 ltrs (undiluted)/10 sqm diluted with water as per manufacturer instructions applied over one coat of acrylic water based exterior grade primer @ 0.9 ltr (undiluted)/10 Sq mtrs diluted with water in 1:1 ratio, to be applied with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI allow 6-8 hrs to dry the surface in both the coats of paint complete all as specified and directed.Note for item No. 125 to 129: (a) The work pertaining to peridical services & water proofing shall be executed from authorized applicator through manufacturer of which the materials i.e. Paint distemper, cement base paint Putty ect is proposed to be used by the contractor and approved by Garrison Engineer.(b) The contractor shall upload along with the documents under cover-I, Memorandum of understanding (MOU) with only one manufacturer mentioned in the contract failing which the bid shall be liable to be rejected. |
| 57 | M&L for waterproof cement based putty @ 1 Kg (undiluted) per sq mtr of average thickness 1mm over the plastered/old painted wall after scrapping to prepare the surface even and smooth complete and sanding of the putty surface with mechanical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500 sanding pad of 240 Grit or above to make the surface free from dust etc. by skilled labour as per following steps:-Step -1 Mix the putty powder by adding water as per manufacturer instructions and mix it with putty mixer with the mixing capacity of min 2.5 Kg putty per minute.Step -2 Apply the first coat the prepared mixer with the help of fully automatic airless spray machine of putty appliation having flow speed of max 6 ltrs per minutes with a maximum pressure 3300 PSI. Step -3 Allow 6-8 hrs time to dry the putty surface. |
| 58 | M&L for applying two coats of Acrylic distemper using airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and cetified by paint manufacturer and as mentioned in PS and accessories for applying distemper should be able to spray in hard to reach areas and penetration of distemper on the surface complete all as specified and directed.Note : Sanding of surface to be done by mechanical sander with 1500 -2700 rpm, with internal dust extraction system for clean environment certified by paint manufacturer. |
| 59 | M & L for preparation of new steel surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed. |
| 60 | S&F for 75 mm bore Cast iron spun pipe (conforming to IS 3989) soil, waste and vent pipes, in any length with or without ears with lead joints, laid in trenches or in floors or fixed to wall vertically complete all as specified and as directed |
| 61 | S&F for 100 mm bore Cast iron spun pipe (conforming to IS 3989) soil, waste and vent pipes, in any length with or without ears with lead joints, laid in trenches or in floors or vertically cast, complete all as specified and as directed |
| 62 | S&F 100 mm bore cast iron Bends of (any radius), spun pipe (conforming to IS 3989) diminishing pieces or tapers (larger bore measured) complete all as specified and as directed |
| 63 | S&F 75 mm bore cast iron spun pipe Bend with oval access door of (any radius), diminishing pieces or tapers (larger bore measured) (conforming to IS 3989) complete all as specified and as directed |
| 64 | S&F 100 mm bore cast iron spun pipe Branch pieces with oval access door Single (equal or unequal) ordinary or inverted (spigot or socket type) or with parallel branches (conforming to IS 3989) complete all as specified and as directed |
| 65 | S&F 75 mm bore cast iron spun pipe Branch pieces with oval access door Single (equal or unequal) ordinary or inverted (spigot or socket type) or with parallel branches (conforming to IS 3989) complete all as specified and as directed |
| 66 | S&F in repair for 75 mm bore out let cast floor trap spun pipe (conforming to IS 3989) incl cockroach trap with gratings including including jointing to waste pipe fixed in cement concrete tpe B-1 (1:2:4) etc complete all as specified and as directed |
| 67 | S&F 75 mm cast iron cowls spun pipe (conforming to IS 3989) complete all as specified and as directed |
| 68 | M & L for cement concrete 1:3:6, type C-2 (using 40 mm graded stone aggregate) as in bed to drain pipes of 100 mm bore including packing under and haunching against the sides of pipe after they are laid and tested complete all as specified and directed. |
| 69 | S & F of 150 mm bore reinforced concrete pipe class NP-3 laid, jointed with collar in neat cement slurry complete all as specified and directed. |
| 70 | Cutting salt-glazed stoneware drain pipe in position, connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished and reforming benching, internal dia of pipe 150 mm, complete all as specified and directed. |
| 71 | S & F of 1000 Litre capacity rotational moulded polythene water storage tanks with self-cleaning/automatic-cleaning (cylindrical vertical with closed top) of specifications as per MES Schedule 2009, Part –I and hoisted, fixed in position complete all as specified and directed. |
| 72 | Taking up or down 15 mm bore steel water tubing and connection, including cleaning for refixing or removal to store complete all as specified and directed. |
| 73 | Taking up or down 20 mm bore steel water tubing and connection, including cleaning for refixing or removal to store complete all as specified and directed. |
| 74 | S&F 15mm nominal bore of pipe in walls, and ceiling or laid in floors, jointing and testing galvanised mild steel water tubing “medium grade” with and including all fitting (such as bends, elbows, tees, short pieces connectors, back nuts, diminishing pieces, capas, plugs and union etc) complete all as specified and directed. |
| 75 | S&F 20 mm nominal bore of pipe in walls, and ceiling or laid in floors, jointing and testing galvanised mild steel water tubing “medium grade” with and including all fitting (such as bends, elbows, tees, short pieces connectors, back nuts, diminishing pieces, capas, plugs and union etc) complete all as specified and directed. |
| 76 | S&F in repair bib tap long body fancy type cast copper alloy chromium plated with crutch or butterfly handle screwed down screwed for iron pipe or brass ferrule or fixed for 15 mm dia bore pipe complete all as specified and as directed. |
| 77 | S & F of 20 mm dia ball valves, high pressure of PTMT with epoxy coated aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 2 0 m m - 2 1 0 g m s . / 25mm-455gms/ 40mm - 690 gms) complete all as specified and directed. |
| 78 | S & F in repairs 450 mm long PVC connection with two Nos. PTMT nuts internally threaded and PVC washer suitable for 15 mm bore pipe line complete all as specified and directed. |
| 79 | S & F in repair fancy type 125mm size square brass CP shower rose with or without swivel joints complete all as specified and as directed. |
| 80 | S & F in repair 20 mm dia brass chromium plated tubular towel rail 'D' type 60 cm long between flanges, including one pair of fixing brackets complete all as specified and directed. |
| 81 | S&F Stainless steel Towel ring complete all as specified and directed. |
| 82 | S&F fancy type brass chromium plated soap dish of 160x160x90 mm complete all as specified and directed. |
| 83 | S&F fancy type glass corner 300mm radius of 10mm thick toughned glass with CP railing fixed with fancy type screws complete all as specified and directed. |
| 84 | S&F in repair stop valves/angle valves fancy type chromium plated brass cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions fixed for 15 mm dia bore pipe complete all as specified and as directed. |
| 85 | Supply and fixed CP 2- way Angle cock 15mm dia with wall flange complete all as specified and directed. |
| 86 | S & F in repair 25 mm bore gun metal globe or gate valve, with iron wheel head, screwed both ends for iron pipe complete all as specified and directed. |
| 87 | S & F Brass CP wall mixer 15 mm bore (wall mounted type) with bend pipe for over head shower for mixing hot and cold water screwed down for iron pipe and fixed complete iall as specified and as directed. |
| 88 | S&F Chromium plated brass Single lever hot & cold basin mixer with 450 mm braided connection pipe with out POP up complete including taking out old unsv Pillar cock, all as directed. |
| 89 | S&F in repair Stainless steel gde 304 Toilet paper holder complete all as specified and directed. |
| 90 | S&F Health faucet (ABS body) mild steel chromium plated suitable for 15mm dia pipe with 1.25m long flexible tube and ABS wall hook including making connections and fixed in position, complete all as specified & directed . |
| 91 | S & F in repairs water closet vitreous china squatting pan ‘Orrisa’ pattern size 580 X 440 mm white with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and flushing pipe, anti-syphonic pipe etc. with and including setting the trap and pan in lime concrete bedding (one lime, two sand or surkhi and 5 aggregate) minimum 150 mm thick alround and finished just below level of rim of pan to receive the floor finishes complete including making good floor complete all as specified and directed. |
| 92 | S & F in repair vitreous china wash down water closet pan (Pedestal pattern) and trap (excluding) fixing bolts,flushing cistern and flush pipe including connection to drain (or outgoing pipe) including plastic seat cover suitable for water closet pedestal pan, coloured closed pattern with flat bottom and cover and mid steel chromium plated or aluminium hinges devices with and including brass chromium plated standard quality jet with nozzle 1500 mm long PVC pipe etc complete all as specified and directed complete all as specified and directed. |
| 93 | S&F in repairs vitreous chinaware coloured wash hand basin with pedestal of size 55X40 cm complete including CP brass waste coupling ,waste pipe including fixing arrangement and cutting for and pinning in walls & making good complete all as specifed and directed. |
| 94 | S & F in repair polymer white (polypropylene Delrin and ABS) low level flushing cistern 10 litre capacity valve less, syphonic action type, complete with inlet, ball valve, float valve, bends, brackets, flush pipe, brass screws, handle etc complete having BIS description mark with IS: 7231 with and including 32 mm bore PVC flush pipe of suitable length complete all as specified and directed. |
| 95 | S&F 600mmx450mm bevelled edge mirror of selected quality glass 4 mm thick, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 96 | Taking down existing un-serviceable water proofing treatment from roof slab and cleaning the roof slab by wire brush up to mother slab and removing WPT felt exc 500 mtr but not exc 1.50 Km etc complete all as specified and as directed |
| 97 | M&L for applying cement slurry over existing roof surafce @ 3 Kg/Sqm incl mixing with water proofing liquid @ 0.15 Ltr per 50 Kg cement bag as per manufacturer's instruction complete all as specified and directed. |
| 98 | M&L for rendering 10 mm thick , in cement mortar 1:4 over RCC slab, mixed using water proofing compound liquid @ 200 ml per bag of cement complete all as specified and directed. |
| 99 | M & L for water proofing treatment to non-accessible roof slab with APP based modified polymeric membrane as per manufacturers instructions with following course :-(a) Applying a priming coat of bituminous primer conforming to IS: 3384-1965 @ 0.30 kg / sqm, till the surface is properly impregnated.(b) Providing APP based 5 layer polymeric membrane minimum weighing 3.6 kg / sqm and minimum 3 mm thick reinforced with polyester non-woven fabric (weight not less than 150 gms /sqm) centre core, laid on primed surface Fixed with hot molten bitumen of grade 85/25 @ 1.2 Kg / Sqm by forced applications as per manufacturers instructions with side over lap of 75 mm and end overlap of 100 mm. All overlap joints shall be sealed thoroughly by thermo fusing both the membrane layer (torching overlap by propane or butane gas torch) and sealing it with the help of hot trowel or bitumen as per manufacturer instructions. The overlap joints shall be made as a monolithic layer. (c) A coat of hot blown bitumen grade 85/25 @ 1.20Kg/Sqm shall be applied on top of APP modified membrane.(d) Apply two coat of bituminous aluminium paint @ 0.20 Kg / Sqm over bitumen coating on APP membrane.Note:- 1. The work of water proofing treatment shallbe got executed authorised applicator of the manufacturer only and 10 year company back warranty to be submitted by contrcator.2. The work is required to be carried out at non-accessible roof slab upto three storeyed. The contractor shall make arrangement of scaffolding, safety and security of workers and arrangement for approach to roof. The rates quoted shall be deemed to be included for these items. |
| 100 | Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.complete all as specified and directed. |
| 101 | M & L point wiring (Light/Fan/Ex fan) complete with and including single core PVC insulated unsheathed flexible bright annealed multi stranded copper conductor FRLS (H) cables 1.5 Sqmm (22/0.30 mm) 1100 volts grade drawn through and including heavy grade PVC rigid conduits 20 mm or higher dia as reqd at site, totally concealed in walls/floors/ceiling including all conduit accessories/ fittings/ junction boxes/ inspection covers etc; of heavy grade, ISI marked and sunken terminal boxes of factory made 16 SWG pressed steel housing, totally concealed in walls with 3 mm thick industrial laminated sheet top cover, fixed flush with wall surface by means of brass screws and sunk/cup washers, for mounting of switches, sockets fan regulates etc; including 1.5 Sqmm (22/0.30 mm) 1100 V grade PVC insulated, unsheathed flexible multi stranded copper conductor FRLS (H) cable as continuous earth wire connected to metallic bodies of luminaries/fans etc; at one end and to common earth dolly at other end, all as specified & directed for light point or one fan point controlled by one, one way switch .Note: (i) The unit rate quoted shall deeemed to be included cutting chases in walls for concealed wiring & making good disturbed surfaces (ii) -Wire/Cable colour coding Shall be maintained properly as per IE rule. |
| 102 | All as per item No 104 but for one 3/5 pin socket outlet 6 Amps on the same board with other switches. |
| 103 | All as per item No 104 but for one 3/5 pin 5 Amp socket outlet on independent board. |
| 104 | All as per item No 104 above here in before but with 2.5 Sqmm (nominal area) cable PVC insulated but unsheathed for the 16 Amp 3/5 pin socket power point including 2.5 Sqmm copper conductor green in colour for earth continuity on independent board complete all as specified and directed. |
| 105 | S&F Ceiling rose three teminal /PVC/ polycarbonate, insulated body complete all as specified and directed. |
| 106 | S&F Modular switch 1 way 6 Amps, 1 module complete all as specified and directed. |
| 107 | S&F Modular switch 1 way 16 Amps, 1 module complete all as specified and directed. |
| 108 | S&F Socket, 6 Amps - 2/3 pin combined 2 module complete all as specified and directed. |
| 109 | S&F Socket 6 Amps/16 Amps - 2/3 pin combined 2 module complete all as specified and directed. |
| 110 | S&F fan step regulator, 120W - 2 module complete all as specified and directed. |
| 111 | Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. |
| 112 | Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete complete all as specified and directed. |
| 113 | S&F in replecement lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and as directed. |
| 114 | S&F in replecement lamp 3 Star LED 9 Watt, 230 volts 50 Hz AC complete all as specified and as directed. |
| 115 | S&F in replecement LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver two core flexible copper conductor cases of suitable size complete all as specified and as directed. |
| 116 | S&F in replecement unique slimlest recess cum surface LED panel LED luminaire 300 mm x 300 mm, 15 watt, 6500K, 220 V AC with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp including connecting up with driver two core flexible copper conductor cases of suitable size complete all as specified and as directed. |
| 117 | S&F in repairs, sheet metal enclosure (Factory made), double door shutter type for distribution board (when MCBs are to be used), single pole and neutral, 240 volts, 8 way, protection class IP-42, suitable for fixing MCBs, Isolators etc, confirming As per IEC 61439-3, suitable for flush mounting and surface mounting, with 100 Amps rated copper busbar, with Neutral bar, Earthbar and cable alley for cable managment, fully shrouded, Neutral bars, prefittes masking sheet complete all as specified and as directed |
| 118 | S&F in repairs, sheet metal enclosure (Factory made), double door shutter type for distribution board (when MCBs are to be used), Tripple pole and neutral, 415 volts, 4 way, protection class IP-42, suitable for fixing MCBs, Isolators etc, confirming As per IEC 61439-3, suitable for flush mounting and surface mounting, with 100 Amps rated copper busbar, with Neutral bar, Earthbar and cable alley for cable managment, fully shrouded, Neutral bars, prefittes masking sheet complete all as specified and as directed. |
| 119 | Supply & fixing in replacement and Testing TP & N Vertical load line (VTPN) 4 way 415 Volts 50 Hz indoor type double door sheet metal enclosure IP-43 DB's IK-09 flush mounted with 250 Amp Copper busbar for each phase with two neutral bar & two earthbar and cable ties for cable management and including MCCB 125 Amps , 4 Pole 36 KA, four pole as in comer including connecting terminal strip complete and SP MCBs as out going etc complete pre wired with suitable size copper conductor. The DB's shall hold type test certificate (CPRI) as per IEC 61439-3 complete all as specified and directed. |
| 120 | S&F in replacement of MCB C Curve TPN 40-100 Amps, 415 V complete all as specified and as directed. |
| 121 | S&F in replacement of MCB SPN, C Curve, 40-63 Amps 10 KA single pole AC 230 volts complete all as specified and as directed. |
| 122 | S&F in replacement of MCB SP, C Curve, 6 to 32 Amps 10 KA single pole AC 230 volts complete all as specified and as directed. |
| 123 | S&F MCCB Enclosure suitable for MCCB 4 Pole 125 Amp complete fixing on wall or any surface including all Electrical connection and other allied works comlete all as specified and directed. |
| 124 | S&F in replacement, MCCB 4 Pole , 125 Amps , 36 KA current carring capacity with adjustable thermal magnetic release all as specified and as directed . |
| 125 | S&F in replacement single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of capacity 20 Amp 240 Volts complete all as specified and as directed. |
| 126 | M &L for sub main wiring(Three Phase) with 3 single core FRLS PVC insulated unsheathed, multi stranded flexible copper conductor 1100 volts grade cables 6.0 Sqmm drawn through concealed conduit and including PVC conduit heavy grade with and including 1 single core 6.0 Sqmm 1100 V grade FRLS PVC insulated unsheathed multi stranded flexible copper conductor cable as continuous earth wire and connecting to common earth terminals including taking down old sub main wiring complete all as specified and as directed. Note: Four runs of 6.0 Sqmm cable and one run of PVC Conduit will be measured as one Rm unit. |
| 127 | M &L for sub main wiring with 2 single core FRLS PVC insulated unsheathed, multi stranded flexible copper conductor 1100 volts grade cables 6.0 Sqmm drawn through concealed conduit and including PVC conduit heavy grade with and including 1 single core 6.0 Sqmm 1100 V grade FRLS PVC insulated unsheathed multi stranded flexible copper conductor cable as continuous earth wire and connecting to common earth terminals including taking down old sub main wiring complete all as specified and as directed. Note: Three runs of 6.0 Sqmm cable and one run of PVC Conduit will be measured as one Rm unit. |
| 128 | M &L for sub main wiring with 2 single core FRLS PVC insulated unsheathed, multi stranded flexible copper conductor 1100 volts grade cables 4.0 Sqmm drawn through concealed conduit and including PVC conduit heavy grade with and including 1 single core 4.0 Sqmm 1100 V grade FRLS PVC insulated unsheathed multi stranded flexible copper conductor cable as continuous earth wire and connecting to common earth terminals including taking down old sub main wiring complete all as specified and as directed. Note: Three runs of 4.0 Sqmm cable and one run of PVC Conduit will be measured as one unit. |
| 129 | Supply & fix wall mounted fans 230 volts single phase oscillating 450 mm sweep suitable for wall mounting. and connecting up complete with and including three core copper conductor flexible cord of 0.5 sqmm cross sectional area of required length from ceiling rose to porcelain connector block of fan complete all as specified and as directed. |
| 130 | Supply and fix Exhaust fan made of sturdy engineering plastic complete with louvers shutter 230 volt 50 HZ RPM 1200 copper winding of sweep 250 mm and fixing the exaust fan in the space provided in window shutters of toilets & bathrooms including three core copper conductor flexible cord of 0.5 sqmm cross sectional area of required length from ceiling rose to exaust fan all as specified and as directed. |
| 131 | Supply, installation and testing of water heater storage type (Geyser) single phase, 230V, 50Hz, 5 star energy saving, high density PUF insulation tank made of heavy duty magnesium anode rod with steel core to protect enamelled tank from rust & corrosion, vertical installation type, 25 Litre capacity, 2000 Watt rated power, incoloy 800 glass coated heating element, tank coating of ferro glass dry powder tank made of ultra thick super cold rolled steel plates, rated pressure 0.8MPa, IPX4 protection consist of safety valves, thermal cut off, thermostat including connecting up fixed to walls by drilling of holes, grouting of bolts of suitable size with nuts etc and making good disturbed surface, complete all as specified & directed. |
| 132 | Supply and laying XLPE insulated, armoured, heavy duty electric cable, with stranded aluminum conductor served with an inner sheathing of PVC tape armoured with galvanized steel wire or tape and overall PVC sheathed 1100 Volts grade, nominal cross sectional area 10 Sqmm 2 core laid in trenches, ducts, drawn through pipes across the road/path/along poles/wall/ floors/ equipment etc including jointing and testing complete all as specified and directed. |
| 133 | Supply and laying XLPE insulated, armoured, heavy duty electric cable, with stranded aluminum conductor served with an inner sheathing of PVC tape armoured with galvanized steel wire or tape and overall PVC sheathed 1100 Volts grade, nominal cross sectional area 70 Sqmm 3.5 core laid in trenches, ducts, drawn through pipes across the road/path/along poles/wall/ floors/ equipment etc including jointing and testing complete all as specified and directed. |
| 134 | Excavation in trenches not exc. 1.50 m wide and not exc. 1.50 m in depth for foundation etc. or for laying of cable/GI pipe/concrete pipe etc. not exc. 10 Sqm on plan and getting out in soft / loose soil complete all as specified and directed. |
| 135 | M&L for laying Galvanised iron tube 40 mm bore light grade (ISI marked) for cable protection to poles/under floor/under roads/alongwith walls complete including MS clamps of flat iron 25x3mm duly painted, GI nuts, bolts and washers & sealing of pipe ends with approved sealing compound, complete all as specified and directed. |
| 136 | S&F 15mm bore dia GI tubing, medium grade with and including all fitting and fixture like union , flange , socket , nipple , bend , elbow , tee, reducer etc complete laid in trenches or laid in floors including cutting and screwing etc all as specified and directed. |
| 137 | S&F 25 mm bore dia GI tubing, medium grade with and including all fitting and fixture like union , flange , socket , nipple , bend , elbow , tee, reducer etc complete laid in trenches or laid in floors including cutting and screwing etc all as specified and directed. |
| 138 | S&F 40 mm bore dia GI tubing, medium grade with and including all fitting and fixture like union , flange , socket , nipple , bend , elbow , tee, reducer etc complete laid in trenches or laid in floors including cutting and screwing etc all as specified and directed. |
| 139 | M&L for Double Walled Corrugted (DWC) HDPE pipe of outer dia 63 mm and Internal dia 38 mm including 90 degree bends with coupler and rubber ring laid in trenches suitable for cable protection complete all as specified and as directed. |
| 140 | S&F 15mm bore dia, stop cock, cast copper alloy, chromium plated, screwed for iron pipe and fixed all as specified and as directed. |
| 141 | Supply and fixing brass CP Mixer for mixing hot & cold water including for shower screwed down for iron pipe and fixed of size 15 mm dia complete all as specified and directed. |
| 142 | M&L for Gun metal globe or gate valve (ISI marked), with iron wheel head, screwed both ends, suitable for 40 mm bore iron pipe and fixed including testing complete all as specifed and directed |
| 143 | M&L for Gun metal globe or gate valve (ISI marked), with iron wheel head, screwed both ends, suitable for 25 mm bore iron pipe and fixed including testing complete all as specifed and directed |
| 144 | S&F of Intergral LED security light luminaire35 W LED, 230 volts made up of pressure die cast aluminium housing powder coated with high power SMD LED’s lens & toughned glass IP-66, luminaire, mounted on & including GI bracket made out of 50mm bore medium grade pipe of 1.70m length, bent to required shape, fixed on PCC/Steel pole with 02 Nos. clamps of flat iron (40 x 6mm), nuts, bolts and washers including painting with two coats of aluminium paint over a coat of red oxide zinc chrome primer, making connection with PVC copper conductor cable of 1.5 sqmm and taking down old unserviceable light fitting of any type/size, complete all as specified & directed. |
| 145 | M&L for construction of valve pit/chamber of Internal dimensions 750 mm x 7500 mm x 750 mm, using PCC 1:4:8, type D-2, using 40mm graded stone aggregates for foundation, 23 cm thick, brick wall built in cement mortar (1:4) ,15 mm thick rendering all around the brick work in cement mortar (1:6), 75 mm thick PCC (1:2:4) type B-1 using 20mm graded stone aggregates in coping including necessary form work, 3coats of white wash on rendered surfaces and on coping, 2 mm thick mild steel top sheet cover with frame made out of 40x40x6 mm angle iron, locking arrangement, including painting of steel surface with two coats of synthetic enamel paint over a coat of red oxide primer including demolition of existing valve chamber and clearing the debris complete all as specified and as directed. |
| 146 | M&L for earthing complete with galvanised steel earth plate electrode 600 x 600 x 6.0mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level, connected to galvanised earth lead wire 4mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel and connecting to main switch or switch board complete and incl PCC masonry pit of 300x300x300mm interior dimensions in PCC 1:2:4 type B-1 RCC cover with GI frame, charcoal and common salt 15cm in layers all round the earth plate, 15mm dia GI watering pipe, a funnel with wire mesh should be provided on top of watering pipe complete all as specified as per electric plate No 3 of SSR 2009 including testing after completion complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 16, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 05, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysOct 07, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 12 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender