Tender For Special Repair To Bldg No S-19 And Certain Revenue Work At Masimpur Mil Stn
Tender Value
45.80 Lakhs
Estimated cost
Bid Submission
09 Oct 2026
6 days left
EMD
91600
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Cachar → Assam
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repair To Bldg No S-19 And Certain Revenue Work At Masimpur Mil Stn
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 29-Sep-2026 | BOQ revised | BOQ | 09-Oct-2026 |
| 2 | 29-Sep-2026 | Date Revised | Date | 09-Oct-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | B & R Division Items |
| 2 | Demolition of reinforced cement concrete of any description other than ground floor and in any position complete all as specified and directed. |
| 3 | Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc. complete all as specified and as directed. |
| 4 | Dismantling floor, hearth or wall tilling including cement mortar bedding (but not backing) removing serviceable tiles to stores and rubbish off the premises. |
| 5 | Dismantling stone slabs of any description or thickness in floors, aprons etc. laid, bedded and pointed in any mortar and disposing off complete all as specified and as directed |
| 6 | Dismantling mild steel work or wrought iron of any description and in any position complete all as specified and as directed. |
| 7 | Dismantling plain or corrugated steel sheeting, any gauge or any thickness as in roof covering, wall cladding, etc.including all necessary staging / scaffolding, etc. as required complete all as specified and as directed. |
| 8 | Dismantling wall and ceiling boards (fibre, pulb, insulation etc) or insulation boards slabs/blankets any thickness including cover fillets all as specified and as directed. |
| 9 | Dismantling boarding any description fixed in any position with nails all as specified. |
| 10 | Dismantling of rain water/sewage pipe of any type and any size including fitting complete all as specified and as directed. |
| 11 | Taking down chowkhats or frame with shutters (without taking off shutters from frame) each not exceeding 1.50 Sqm each complete all as specified. |
| 12 | Taking down Chowkhats or frames with shutters exceeding 1.5 Sqm but not exceeding 4 Sqm each (without taking off shutters from the frame) complete all as specified. |
| 13 | Taking up or down 15mm dia GI steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and as directed. |
| 14 | Taking up or down 20mm dia GI steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and as directed. |
| 15 | Surface dressing n exc 15 cm deep and getting out in soft / lose soil complete all as specified |
| 16 | Excavation over areas not exceeding 1.5m deep and getting out soft type of soil complete all as specified and directed. |
| 17 | Excavation over areas exceeding 1.5m and n exc 3m deep and getting out soft / lose type of soil complete all as specified and directed. |
| 18 | Excavating in trenches, n exc 1.50 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out soft/ loose type of soil complete all as specified and directed. |
| 19 | Returning, filling in trenches including spreading, leveling watering and ramming in layers not exceeding 25cm all as specified. |
| 20 | Removing of surplus soil not exceeding 50 m and deposited where directed at a level not exceeding 1.50m above the starting point all as specified. |
| 21 | Excavating in post holes ( or similar holes) each n exc 0.50cum getting out returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, as insoft/ loose type of soil complete all as specified and directed. |
| 22 | M&L for Hardcore broken stone of gauge exc 40mm and n exc 63mm deposited spread and levelled in layers n exc 15cm thick watered and rammed to a true surface complete all as specified and directed. |
| 23 | M&L for PCC (1:4:8), Type D2 using 40 mm graded stone aggregate as in foundations, sub-base,filling and mass concrete complete all as specified. |
| 24 | M&L for providing 75 mm thick cement concrete (1:4:8) type D-2 using (40mm graded stone aggregate) as in Sub base of floor rough surface for receiving tile complete all as specified. |
| 25 | M & L for plain cement concrete 1:3:6 type C-2 (using 40mm graded stone aggregates) as in foundations, sub-base,filling and mass concrete complete all as specified and dirceted |
| 26 | M & L for 75mm thick plain cement concrete 1:3:6 type C-1 (using 20mm graded stone aggregates) as in plinth protection, finished over and smooth without using extra cement complete all as specified and dirceted |
| 27 | M & L for plain cement concrete (1:2:4) type B1 using 20mm graded aggreagate as in bed blocks, coping , cills, steps, kneelers, bed plates, apex stones kerbs and similar works including necessary formwork complete all as specified and directed. |
| 28 | M&L for plain cement concrete (1:2:4) type B-1 using (20mm graded stone aggregate) as in kerbs or mud stops, rounded or chamfered on edges complete all as specified. |
| 29 | M & L for 25mm thick Plain Cement concrete type B-0 1:2:4 (12.5mm graded crushed stone aggregates) as in floors all as specified and directed. |
| 30 | M & L for Precast Reinforced cement concrete (1:2:4) type B-1 using 20mm graded aggreagate as in cover slab for man holes, chullah hoods, chajja, water troughts, mangers, shelves and similar article with plain faces set in cement mortar (1:4) incl necessary formwork complete all as specified and directed. |
| 31 | Use and waste formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter rough finished flat surfaces of concrete complete all as specified and as directed. |
| 32 | Use and waste of formwork to sides of pillars, posts, struts, piers, columns and stanchions for rough finished flat surfaces of concrete all as specified and directed. |
| 33 | Use and waste formwork to sides and soffits of floor or roof beam, beam hunching, girder, lintels, cantilever, shelves including supports etc for rough finished flat surfaces of concrete complete all as specified and directed |
| 34 | Use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed |
| 35 | Use and waste formwork to edges of concrete flats,slabs etc incl fair finished surfaces exe 5cm but n.exe 10cm wide all as specified nd directed. |
| 36 | M & L for Reinforced Cement Concrete M-25 (design mix) using 20 mm graded aggregate as in foundation including rafts, footings, foundation beams, plinth beams, bases for columns etc complete all as specified and directed. |
| 37 | M & L for Reinforced Cement Concrete M-25 (design mix) using 20 mm graded aggregate as in column, pillars, piers, posts, and struts complete all as specified and directed. |
| 38 | M & L for Reinforced Cement Concrete M-25 (design mix) using 20 mm graded aggregate as in beams, cantilever, lintels over 1.5m complete all as specified and directed. |
| 39 | M & L for providing Reinforced Cement Concrete nominal mix 1:1.5:3 type A1 using 20mm aggregate as in slab supported on walls , beams, and column in floors, roof, landing, balconies, canopies, deck slab and in shelves and like etc comlpete all as specified and directed. |
| 40 | M & L for Reinforced Cement Concrete M-25 (design mix) using 20 mm graded aggregate as in slab supported on walls, beams and columns in floors, roof landig balconies, canopies, deck slab and shelves and like complete all as specified and directed. |
| 41 | M & L for slab supported on walls , beams, and column in floors, roof, landing, balconies, canopies, deck slab and in shelves and like etc comlpete all as specified and directed. |
| 42 | M & L for mild steel TMT bars 10mm dia and over, cut to length bend to shape as required including cranking, hooking etc and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed. |
| 43 | M & L for Mild steel TMT bars 6mm to 8mm dia and over , cut to length bend to shape as required including cranking, hooking etc and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed. |
| 44 | M & L for Mild Steel TMT Bar 6mm dia and over up to 10 mm dia as in stirrups, spacers and binders as required including cranking, hooking etc and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed |
| 45 | M & L for brickwork built in Cement mortar (1:6) with locally available Subclass ‘B’ old size best quality brick, straight or curved on plan exc 6 m mean raduis complete all as specified and directed. |
| 46 | M & L for half brick work built in cement mortar (1:4) with locally available Subclass ‘B’ old size best quality brick, straight or curved on plan to radius complete all as specified . |
| 47 | M & L for brick work make honey combing one brick wall built in cement mortar (1:4) with Subclass ‘B’ old size best quality brick, straight or curved on plan to radius complete all as specified . |
| 48 | M&L applying one coat of cold bituminous primer (as approved by GE) @0.25 ltr/Sqm over dried up surface of concrete/ plastered including cleaning surfaces confirming to IS 3384-1986 complete all as directed by Engineer in charge. |
| 49 | Supply and laying APP based polymeric membrane 3 mm thick (Minimum), weighting not less than 3.5 kg/Sqm reinforced with polyester non woven fabric (weighting not less than 160 gms/sqm) shall be applied over Bituminious primer as specified above. Application of polymeric membrane shall be by torching application etc as per manufacturer's instructions. The overlaps shall be minium 100 mm on the transverse direction and 75 mm longitudinal direction including one coat of aluminium paint over the APP modified membrane @ 0.11 Kg/Sqm complete all as specified. |
| 50 | M&L for 5 mm thick rendering in cement mortar 1:3 on ceiling surfaces finished even and smooth complete all as specified. |
| 51 | M & L for 10mm thick rendering cement mortar 1:6 on other than fair faces of brick wall or concrete surfaces, finished fair and even without using extra cement complete all as specified. |
| 52 | M & L for 15 mm thick rendering in cement mortar 1:3 on fair faces of brick wall or concrete surfaces, finished the surfaces even and fair without using extra cement complete all as specified. |
| 53 | M & L for 15 mm thick rendering in cement mortar 1:4 on fair faces of brick wall or concrete surfaces, finished the surfaces even and fair without using extra cement complete all as specified. |
| 54 | M&L for 20 mm thick rendering in cement mortar (1:3) on fair face of brick or concrete surface with WPC mixed @3%, finished even and fair using extra cement complete all as specified. |
| 55 | Supply only integral water proofing compound WPC complete all as specified. |
| 56 | M & L Non Skid ceramic tiles colour 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.11 but not exceeding 0.18 sqm, as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile including 15 mm thick screed bed or bedding layers in cement mortar 1:4 over brushing with neat cement slurry complete all as specified. |
| 57 | M & L Non Skid ceramic tiles coloured 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.11 but not exceeding 0.18 sqm, as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile including 15 mm thick screed bed or bedding layers in cement mortar 1:6 over brushing with neat cement slurry complete all as specified. |
| 58 | M & L Non-skid coloured ceramic tiles 7 to 8 mm thick ( square/rectangular) area of each tiles exc 0.18 sqm but not exc 0.36 sqm as in floors, set and jointed in cement slurry and pointed in white or colour cement to match the shade of tile over and including screed bed or bedding layers of 15 mm thick cement mortar (1:4) complete all as specified |
| 59 | M & L Non-skid coloured ceramic tiles 7 to 8 mm thick ( square/rectangular) area of each tiles exc 0.18 sqm but not exc 0.38 sqm as in vertical surfaces of skirting/dado etc set and jointed in cement slurry and pointed in white or colour cement to match the shade of tile over including over 10 mm thick rendering in CM (1:4) complete all as specified. |
| 60 | M & L Glazed ceramic coloured tiles in vertical surface size 450mm X 300mm X & ( 6mm to 7mm )mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over & including 10mm thick screed bed or backing coat in cement mortar 1:4 laying of skirting/dado on walls all as specified and directed. |
| 61 | M&L for 20mm thick granite stone slab, of any type, table rubbed and polished, in steps, jambs, pillars, window cills, cooking platforms, urinalpartitions, stand for WHB and like over 15mm thick backing coat of cement mortar (1:4) set & jointed in neat cement slurry & pointed in white or coloured cement to match the shade of granite complete all as specified and as directed. |
| 62 | M&L chequered cement concrete tile 20cm X 20cm X 22mm thick set over and including screed bed or bedding layers of 15mm thick cement mortar (1:6) as in floors complete all as specified and as directed. |
| 63 | S & F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified. |
| 64 | S & F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified. |
| 65 | S & F Framed work such as grills, gratings, etc.. with ends of bars or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed. |
| 66 | S & F Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers,hold fasts, bands, straps, wall ties, plain angle cleats, eaves board frame and similar articles conforming to Fe-290 Gde-E-165 complete all as specified and directed. |
| 67 | S&F of mild steel rolled sections (Fe-290, Gde E-165) as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and other misc brackets ; fixed with angle cleats for fixing of eaves board or other connecting plates complete all as specified. |
| 68 | S & F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment Fe 410W grade E-250 quality B complete all as specified. |
| 69 | S & F structural steel work in tubular/hollow sections trusses , Purlin , posts, rafter etc including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St.-240 complete all as as specified and directed. |
| 70 | S & F Pressed steel frames made of 1.25mm thick MS sheet of profile 125x60mm for door and window frames with one or more rebates including hinges, lock strike plate, shock absorber, treating of internal surfaces of chowkhats with coal tar or black paint including hinges, hold fasts/lugs etc complete all as specified. |
| 71 | S&F Steel ventilator with top hung shutter including hinges, steel peg stay, lugs as in hold fast with locking arrangements, complete all as specified. |
| 72 | S&F Steel ventilator with top hung shutter including hinges, steel peg stay, lugs as in hold fast with locking arrangements, complete all as specified. |
| 73 | M & L Plain Cement concrete (1:3:6), type C-0 using 12.5mm graded stone aggregate as in filling of hallow steel chowkhats, bed block, fixing of holdfast and similar likes including necessary formwork complete all as specified. |
| 74 | S & F factory made uPVC white colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) comprising of uPVC multichambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass or wiremesh shall be paid separately) |
| 75 | S & F Solid PVC door frame of size 50mm X 47mm made of 5 mm plain colour PVC sheet reinforced with mild steel square tube , supplying & fixing in opening as per specification & drawing complete all as specified . |
| 76 | S & F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement, S & Fing in the frame at site as per clause 8 B.2.1 of MES schedule Part-II (2004) complete all as specified. Make: Rajshri or equivalent as approved. |
| 77 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with MS hold fastlugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. Note: 1. For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.2. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). |
| 78 | Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) and 900 N (Edge), minimum compressive strength 50 N/mm, modulus of elasticity 850N/mm? and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hings of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary SS screws shall be paid separately |
| 79 | S&F 2nd class hard wood, 35 mm thick, plain framed panel shutter (any numbers of panel) with panels of timber flat on both sides (feather edged) or 12 mm thick veneered particle board medium density fitted to chowkats or frames complete all as specified and directed. |
| 80 | S&F 2nd class hard wood glazed and skeleton door shutters 35 mm thick open rebated and prepared to receive glass, guage etc (withoput sash bars), edge of framing plain chemfered ro rounded fitted with cut and mitred beds for securing glass etc size of members of shutter as specified in SSR Part I section 8 clause 8.20(a) complete all as specified and directed. |
| 81 | S & F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified. |
| 82 | S&F 3.00 mm thick sheet glass ordinary quality and glazing with oil putting square n exc 0.5 sqm in each pane complete all as specified. |
| 83 | S&F 3.00 mm thick sheet glass frosted ordinary quality and glazing with oil putting square nexc 0.5 sqm in each pane complete all as specified. |
| 84 | S&F 100mm long Butt hinges, extruded aluminium alloy anodised with galvanised MS pin, fixed with chawkhat complete all as specified and directed. |
| 85 | S & F 125 mm long aluminium handles cast type anodised complete all as specified & directed . |
| 86 | S & F 150 mm long aluminium handles cast type anodised complete all as specified & directed . |
| 87 | S & F 150 mm long aluminum anodised barrel tower bolts of extruded section complete all as specified and directed. |
| 88 | S & F 300mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixedcomplete all as specified. |
| 89 | S&F Door stopper of aluminium alloy body and tongue, anodised with hard drawn steel springs, fixed to door with over all length 150mm with rubber bush complete all as specified and directed |
| 90 | S&F double action spring hinges, mild steel with steel wire spring, stove enamelled, black, size of spring hinge 150mm complete all as specified and as directed. |
| 91 | S&F as in repairs, 25 mm dia and 1mm thick MS chromium plated curtain rods with fixing side fancy type brackets end knobs fixed with steel screws etc all as specified and directed . |
| 92 | S &F Vitreous China urinals, bowl type urinal flat back, size of 375 X 390 X 590 mm white (minimum), with grating and union for discharge pipe (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. Note: (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) |
| 93 | S & F in repair vitreous china wash basin, white, under counter, size 565 X 465 X 185 mm oval shape including waste coupling and excluding taps, waste ,chain and plug and porcelain stopper complete all as specified. Make:Parryware Catalouge No- C0483 and Equivalent as per approved list of make) |
| 94 | S & F as in repair, vitreous china wash basin, white flat back size 550 x 400 mm, excluding taps, waste chain, plug and porcelain stopper but including waste coupling, brackets, cutting for and pinning in ends of bracket or erecting stand complete all as specified. |
| 95 | S & F in repair, vitreous china Squatting pan, 'Orissa' pattern, Size 580 X 440mm ,with integral foot rests (excluding flushing ciestern and flush pipe) complete all as specified & as directed . |
| 96 | Supply & Fixed in repairs, Vitreous china wash down water closet pan ( pedestal pattern ) , white P or S trap including seat cover but excluding fixing bolts, flushing cistern and flush pipe complete all as specified and as directed. |
| 97 | S & F in repair, PVC valveless, syphonic action type, low level flushing cistren 10 ltr capacity light coloured with inlet ball valve float and handle including flush / discharge pipe with all fitting complete all as specified. |
| 98 | S & F in repair PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified. |
| 99 | S & F PVC connections 15mm dia size with PTMT nuts of length 450mm complete in all respect as specified |
| 100 | S & F in repair, soap dish chromium plated standerd quality approximate size 160 x 160 x 90mm fixed on wall with brass screw complete all as specified. |
| 101 | S & F soap dish chromium plated standerd quality approximatesize 160 x 160 x 90mm fixed on wall with brass screw complete all as specified. |
| 102 | S & F in repair, 15mm bore pillar tap fancy type, cast copper alloy with capstan head, chromium plated, concealed screwed down high pressure with or without letterd hot or cold with long shunk screwed shanks and fly nuts screwed for iron pipes and connecting to water pipe line complete all specified and directed. |
| 103 | S & F 15mm bore pillar tap fancy type cast copper alloy with capstan head, chromium plated, concealed screwed down high pressure with or without hot or cold with long shunk screwed shanks and fly nuts screwed for iron pipes and connecting to water pipe line complete all specified and directed. |
| 104 | S & F as in repair, 15 mm bore bib taps fancy type, cast copper alloy, chromium plated with crutch or butter fly handle, screwed down for iron pipe or for brass ferrule including accessories complete all as specified and directed. |
| 105 | S&F 15mm bore bib taps fancy type ,cast copper alloy, chromium plated with crutch or butter fly handle, screwed down for iron pipe or for brass ferrule including accessories complete all as specified and directed. |
| 106 | S & F as in repair, 15mm bore angular stop cock, cast copper alloy cromium plated fancy type screwed for 15 mm bore GI pipe or for unions complete all specified and directed. |
| 107 | M & L Swivel shower of PTMT any colour for fixing with 15mm pipe (Minimum weight 40gms) complete in all respect as specified |
| 108 | Supply and laying of CPVC pipes outer dia 20mm SDR 11 & plain CPVC SDR 11 fittings on wall/ceiling or laying in floor complete all specified and directed. |
| 109 | Supply and laying of CPVC pipes outer dia 25mm SDR 11 & plain CPVC SDR 11 fittings on wall/ceiling or laying in floor complete all specified and directed. |
| 110 | S & F 15mm bore angle valve fancy type, cast copper alloy, screwed down, high pressure screwed, chromium plated ,crutch or butter fly handleand fixed complete all as specified. |
| 111 | S & F 15mm bore stop valve fancy type, cast copper alloy, screwed down, high pressure screwed chromium plated, crutch or butter fly handleand fixed complete all as specified. |
| 112 | S & F 15mm bore stop valves/angle valve of cast copper alloy, concealed, cup screwed down, high pressure with crutch or butter fly handle, chromium plated, with long shank fixed complete all as specified. |
| 113 | S&F in repairs, Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified |
| 114 | S & F Chromium plated shower roses with swivel joints and wall bracked, any size incl shower arm 15mm pipe with 195mm long with bend of 45 degree with flange of CP brass complete all as specified and directed.Make:- Parryware of Cat No- T9809A1 or equivalent as per approved product list. |
| 115 | S&F in repair corner glass shelf 225mm radius and railing height 70mm including fixing arrangement complete all as specified and directed. |
| 116 | S & F as in repair, bevelled edge mirror complete all as specified and directed.Make : Modiguard, Saint Gobain or equivalent as per approved product list. |
| 117 | S & F 600mm X 450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 118 | S & F in repair Towel rail, 20mm dia brass chromium plated, 600mm long with fancy type brass chromium plated brackets on both sides and fixed with steel screws and wooden/rawl plugs complete all as specified. |
| 119 | S & F in repair Towel rail, 20mm dia brass chromium plated, 600mm long with fancy type brass chromium plated brackets on both sides and fixed with steel screws and wooden/rawl plugs complete all as specified. |
| 120 | S & F Shower arm 15mm dia, 195mm long with bend of 45 degree with flange of CP brass complete all as specified. |
| 121 | S&F in repair brass chromium plated bottle trap for wash basin with inlet and outlet screwed for pipe or connection including necessary packing union and cap and fixed. |
| 122 | S & F as in repairs, 32 mm dia and 800mm long PVC flexible corrugated waste pipe for wash basin/sink complete all as specified and as directed.Make : (Prayag CAT No. 327) or equivalent as per approved product list. |
| 123 | M&L for PCC (1:3:6) Type C2 using 40 mm graded stone aggregate as in bed to drain for 100 mm bore including packing under and hunching against side of pipe after they are laid and tested complete all as specified. |
| 124 | S & F 110mm bore PVC (SWR) pipes single socketed with rubber joint, in any length, with rubber ring joints, laid in trenches or in floors, fixed to walls complete all as specified. |
| 125 | S & F 75mm bore PVC (SWR) pipes single socketed with rubber joint, in any length with rubber ring joints, laid in trenches or in floors, fixed to walls complete all as specified. |
| 126 | S & F 110mm bore PVC (SWR) bend suitable for pipe complete all as specified. |
| 127 | S & F 75mm bore PVC (SWR) bend suitable for pipe complete all as specified. |
| 128 | S & F 110mm bore PVC (SWR) vent cowl suitable for pipe complete all as specified. |
| 129 | S & F 110mm bore PVC (SWR) junction, single T equal or unequal with or without door access complete all as specified. |
| 130 | M & L PVC(SWR) floor trap, 75mm dia outlet, plain with grating including jointing with solvent cement complete all as specified. |
| 131 | S & F 15mm bore galvanised iron water tubes medium grade with all fitting and fixed to wall, ceiling or laid in floor and trench complete all as specified. |
| 132 | S & F 20mm bore galvanised iron water tubes medium grade with all fitting and fixed to wall, ceiling or laid in floor and trench complete all as specified. |
| 133 | Cutting grooves or rebates not exceeding 20 cm girth, and trimming with or without reinforced surfaces complete all as specified and directed. |
| 134 | S & F as in repair 20 mm bore dia, Gun-metal, gate valves, with iron wheel head, screwed both ends on GI pipes with GI union fixed in existing/ new location complete all as specified and directed. |
| 135 | Supplying, hoisting, fixing and connecting up 500 litre rotational moulded polythylene water storage tanks double layer (cylindrical vertical with closed top), hoisted and fixed in position all as specified in SSR Part-I including connecting the overflow drain out, inlet and outlet pipes, tank nipple, elbow, bend, unions, sockets, etc. complete all as specified and as directed |
| 136 | S&F Ball valves high pressure of PTMT with epoxy coated aluminium rod & high- density plastic bal screwed for iron pipe and fixed (min wt 15mm-142gms/20mm-210gms/25mm- 455gms/40mm-690gms) for 20mm bore pipe complete all as specified and directed. |
| 137 | S&F Ball valves high pressure of PTMT with epoxy coated aluminium rod & high- density plastic bal screwed for iron pipe and fixed (min wt 15mm-142gms/20mm-210gms/25mm- 455gms/40mm-690gms) for 25mm bore pipe complete all as specified and directed. |
| 138 | M & L for suspended false ceiling using E-grid 2430, 180 GSM (exposed ceiling suspension system) of grid size 600mmx600mm with main runner 38 mm x 24 mm and wall angle 24mm x 24mm using 4mm thick high Pressure high pressure Non Asbestos Fiber Cement decorative Board (E-Board Classic) in a grid of GI system duly suspended with 4 mm dia GI bar hanger fixed with steel dash fasteners or iron purline from the roof with adjustment clip providing positions for light fixtures, air conditioning diffuser and ducts, sprinkler, smoke detectors etc. The main runners to be secured to structural soffits by hanger @ 1220 mm maximum c/c. The last hanger at the end of each main runner should not be placed at more than 450mm from the adjucent wall, flush fiiting 1220mm cross tee to be interlocked between main runners @ 610mm c/c, as to form 600 mm x 600 mm grid and incl apply coloured painting work with two coat of acrylic emulsion paint over a coat of cement primer before installing it on the grid all as specified and directed. Make : Everest Industries Ltd or equivalent as per IS 14862 all as specified and directed. |
| 139 | M & L for preparation of new plastered surface surfaces of walls and applying three coats of white wash complete all as specified and directed. |
| 140 | M & L for preparation of new or previously untreated ceiling surfaces and applying three coats of white wash complete all as specified and directed. |
| 141 | M & L for preparation of new or previously untreated surfaces and applying two coats of cement base paint over one coat of primer all as specified and directed |
| 142 | M & L preparation of new plastered surface of walls and applying two coat of oil emulsion distemper over and incl one coat of primer with using roller complete all as specified. |
| 143 | M & L for preparation of new plastered surface applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm using roller complete all as specified and directed. |
| 144 | M & L Preparation of new steel surfaces surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer of surfaces complete all as specified. |
| 145 | M & L preparation of old steel surfaces of any description over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed. |
| 146 | M & L for preparation of new wooden surfaces of any description not other wise described over 10 cm width or girth and applying two coat of Synthetic enamel paint over a coat of pink primer complete all as specified and as directed. |
| 147 | E & M Division items |
| 148 | Taking down carefully copper/aluminium point wiring (light, fan, buzzer, socket or power) complete including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc including removing from site for taking credit and making good to disturbed surface of walls, floors etc as per existing specification complete all as specified and as directed. |
| 149 | Taking down carefully submain wiring including all accessories without disturbing existing wiring fittings fixtures etc and making good to the disturbed surfaces all as directed and as specified in any type and size all as directed. |
| 150 | Dismantling old unserviceable main switches, sheet metal enclosures DB including MCBs etc and removing from site for taking credit incl making good to disturbed surface of wall as per existing specification complete all as specified and as directed. |
| 151 | Dismantling of U/s GI pipe of size 40 mm/50mm bore complete all as specified and directed. |
| 152 | Taking out old U/s XLPE cable of any size/type incl taking out of bricks/cable cover complete all as specified and directed. Note :- (Excavation and earth work will be measured and paid separately under respective items) |
| 153 | M & L for point wiring with FRLSH stranded copper conductor 1.5 sqmm (nominal area), two single core, PVC insulated cable 1100 volts grade, ISI-694 marked in and including heavy duty PVC conduit concealed including all accessories etc ISI marked, with modular metal flush box suitable for fixing switches, sockets and regulators including PVC insulated stranded copper conductor 1.5 sqmm (nominal area) single core cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed for One light point controlled by one switch. |
| 154 | M & L for point wiring with FRLSH stranded copper conductor 1.5 sqmm (nominal area), two single core, PVC insulated cable 1100 volts grade, ISI-694 marked in and including heavy duty PVC Conduit concealed including all accessories etc ISI marked, with GI sunken box suitable for fixing switches, sockets and regulators including PVC insulated stranded copper conductor 1.5 sqmm (nominal area) single core cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed for ceiling fan point controlled by one switch. |
| 155 | M & L for point wiring with FRLSH stranded copper conductor 1.5 sqmm (nominal area), two single core, PVC insulated cable 1100 volts grade, ISI-694 marked in and including heavy duty, concealed PVC Conduit including all accessories etc ISI marked, with GI sunken box suitable for fixing switches, sockets and regulators including PVC insulated stranded copper conductor 1.5 sqmm (nominal area) single core cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed for One fan point/exhaust fan point controlled by one, one way switch . |
| 156 | M & L for point wiring with FRLSH stranded copper conductor 1.5 sqmm (nominal area), two single core, PVC insulated cable 1100 volts grade, ISI-694 marked in and including heavy duty PVC Conduit concealed including all accessories etc ISI marked, with GI sunken box suitable for fixing switches, sockets and regulators including PVC insulated stranded copper conductor 1.5 sqmm (nominal area) single core cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed for One 3 pin 5 Amp socket outlet point controlled by one switch on the same board. |
| 157 | M & L for point wiring with FRLSH stranded copper conductor 1.5 sqmm (nominal area), two single core, PVC insulated cable 1100 volts grade, ISI-694 marked in and including heavy duty, PVC Conduit including all accessories etc ISI marked, with GI sunken box suitable for fixing switches, sockets and regulators including PVC insulated stranded copper conductor 1.5 sqmm (nominal area) single core cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed for One 3 pin 5 Amp socket outlet point controlled by one switch on independent board. |
| 158 | M & L for point wiring with FRLSH stranded copper conductor 2.5 sqmm (nominal area), two single core, PVC insulated cable 1100 volts grade, ISI-694 marked in and including heavy duty PVC Conduit concealed type including all accessories etc ISI marked, with GI sunken box suitable for fixing switches, sockets and regulators including PVC insulated stranded copper conductor 2.5 sqmm (nominal area) single core cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed for 3 pin, 15 Amp socket outlet, independent |
| 159 | M&L for point wiring with FRLSH stranded copper conductor 4.0 sqmm (nominal area), two single core, PVC insulated cable 1100 volts grade, ISI-694 marked in and including heavy duty PVC Conduit concealed type of suitable size including all accessories etc ISI marked, with GI sheet pressed terminal box (recessed) with 3mm thick laminated hylem sheet top cover for fixing switches, sockets and regulators including PVC insulated FRLSH stranded copper conductor 4.0 sqmm (nominal area) single core cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed for 3 pin, 15 Amp socket outlet, independent.Note: The point wiring will be done from DBs to the switch sockets of any size with three wires running independently for each point and with no tappings. |
| 160 | S&F switch piano flush type button single pole one way 5 Amps all as specified and directed. |
| 161 | S&F socket outlet 2 in 1, 3 pin 5 Amp flush type all as specified and directed. |
| 162 | S&F switch piano flush type button single pole one way 15 Amps all as specified and directed. |
| 163 | S&F Socket outlet 2 in 1, 3 pin, 5 and 15amp flush type all as specified and directed. |
| 164 | S&F ceiling rose surface bakelite with three terminals all as specified and directed |
| 165 | S&F ceiling fan regulator socketed, step type, flush type heavy duty suitable to work on 230 volts Ac supply complete all as specified. |
| 166 | S & F LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp of suitable size complete all as specified and directed.. |
| 167 | S&F LED decorative light fitting made up of Polycarbonate, suitable for 9W LED lamp B22 base, classic wall light suitable for Each living/bed rcom, antique surface, sieek, of aproved design with 9W LED lamp and connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed. Make : Cat No: LHDL06160099 of Havells or equivalent as per approved product list |
| 168 | M & L for submain wiring with two single core 1.5 sqmm PVC insulated unsheathed cable multi-strand copper conductor FRLSH drawn through and including PVC non metallic rigid PVC Conduit with all fittings and fixing accessories on roof, walls, ceiling etc including 1 x 1.5 sqmm PVC insulated unsheathed multi strand copper conductor earth wire FRLSH connecting earth including cutting groove for concealed wiring, making good to disturb surface of wall/floor with cement mortar and finishes to match existing complete all as specified and directed.Note: Two run of single core cable, one run earth wire and one run PVC Conduit will be measured as one length. |
| 169 | M & L for submain wiring with two single core 6.0 sqmm PVC insulated unsheathed cable multi-strand copper conductor FRLSH drawn through and including PVC non metallic rigid Conduit conceled with all fittings and fixing accessories on roof, walls, ceiling etc including 1 x 4.0 sqmm PVC insulated unsheathed multi strand copper conductor earth wire FRLSH connecting earth including cutting groove for concealed wiring, making good to disturb surface of wall/floor with cement mortar and finishes to match existing complete all as specified and directed. Note: Two run of single core cable, one run earth wire and one run PVC Conduit will be measured as one length. |
| 170 | Supply & Fix LED betten plastic type fitting of capacity 20W, operating on 230V, 50Hz, AC Supply having luminous efficacy of not less than 125 lumens/watts, CCT 6500K, P.F>0.9, 2.5 KV surge protection, 4-feet long, housing made out of extruded alluminium with decorative end caps elegently designed complete all as specified. |
| 171 | S&F bldg security light, LED luminaire 30 watt made up of pressure die cast alluminium body with mid power LED as lighting sources and PC cover having Top opening separate driver compartment with IP66 protection and impact resistance of IK07 including fixing arrangements and taking down old rusted bracket fittings complete all as per directed by Engr- in – charge. |
| 172 | S&F plastic body exhaust fan 250mm sweep complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, copper winding and connecting to ceiling rose with flexible copper cable including making holes on the wall and making good to the disturbed surfaces complete all as specified and as directed. |
| 173 | S&F Metal body exhaust fan 300 mm sweep complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, copper winding and connecting to ceiling rose with flexible copper cable including making holes on the wall and making good to the disturbed surfaces complete all as specified and as directed. |
| 174 | S&F BLDC ceiling fan 1200mm sweep complete with blades, down rods and accessories, 230 V, min air delivery 210 CFM with service value 6.00 BEE 5 star rated & provn of ‘S’ type fan hook including taking down of old UNSV one and depositing to MES storeyard complete all as specified and as directed. |
| 175 | S & F electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection pipe etc complete all as specified and as directed. |
| 176 | S&F Angle bracket 40mm dia for fixing building security light of 40mm dia of 1 mtr long bent to shape 45 degree for fixing of security light including MS clamps of suitable size including nuts, bolts complete all as specified and directed |
| 177 | S&F moduler type 3/5 pin socket with one single pole MCB 20Amp 230Volts including concealing in wall suitable for geyser, AC and domestic applianes complete all as specified and directed. |
| 178 | S&F Factory made distribution board sheet metal enclosure powder coated single phase and neutral (SPN) for fixing of MCBs, 8 way double door with Aluminum bus bar 100 Amp including grouting on the wall by means of screws and rawal plugs and making good disturbed surfaces complete all as specified and directed. |
| 179 | S&F Factory made distribution board sheet metal enclosure powder coated single phase and neutral (SPN) for fixing of MCBs, 4 way double door with aluminum bus bar 100 Amp including grouting on the wall by means of screws and rawal plugs and making good disturbed surfaces complete all as specified and directed. |
| 180 | S&F Factory made distribution board sheet metal enclosure powder coated three phase and neutral (TPN) for fixing of MCBs, 4 way double door with aluminum bus bar 100 Amp including grouting on the wall by means of screws and rawal plugs and making good disturbed surfaces complete all as specified and directed. |
| 181 | S&F MCB TPN of capacity 63 Amps, 240 V, 10 KA 'B' curve complete all as specified and directed. |
| 182 | S&F MCB SPN of capacity 40-63 Amps, 240 V, 10 KA 'C' curve complete all as specified and directed. |
| 183 | S&F MCB SP of capacity 5-32 Amps, 240 V, 10 KA 'C' curve complete all as specified and directed. |
| 184 | Taking out old existing earthing and M & L for new earthing with galvanised steel earth plate electrode 600mmX600mmX6mm thick burried directly in ground (earth pit not less than 2.25 mtr below ground level) with top edge of the plate not less than 1.5 mtr below ground level connected to 4mm dia GI wire protected by 20 mm bore light grade galvanised iron pipe and other end connected to test point as directed including funnel with wire mesh and watering pipe 20 mm bore medium grade galvanised iron pipe with charcoal and common salt in alternaterlayers of 15 cm thickness all around the GI plate electrode with concrete pit in PCC 1:3:6 type C-1 with cast iron frame including cast iron cover 10mm thick hinged to CI frame and 6mm MS rod for handle, necessary excavation and earth wok in any type of soil and disposal of spoil to a distance n exc 50 m and necessary testing complete all as shown in electrical plate No 3 of SSR part-I complete all as specified and directed. |
| 185 | Supply, fixing, commissioning & testing of XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, Electric power cable (heavy duty) with aluminium conductors, 1100 volts, grade cross sectional area 10sqmm 3 core laid in trenches/fixed to wall/under road/pipe etc with copper cable glands & copper thimbles complete all as specified and directed. |
| 186 | Supply, fixing, commissioning & testing of XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, Electric power cable (heavy duty) with aluminium conductors, 1100 volts, grade cross sectional area 25 sqmm 3.5 core laid in trenches/fixed to wall/under road/pipe etc with copper cable glands & copper thimbles complete all as specified and directed. |
| 187 | S & F of GI tube medium grade 50 mm bore used of cable protection complete all as specified and directed. |
| 188 | Excavation in trenches not exceeding 1.50 m wide and n.exc 1.5 m in depth for foundation of poles, cable etc, not exc 10 sqm on plan and getting out in soft/loose soil including taking out brick protection etc complete all as specified and directed. |
| 189 | Returning, filling in, including spreading, leveling, watering and well ramming in layers not exc 30cm thick complete all as specified and directed. |
| 190 | Removing excavated materials (soils) not exc. 50m and depositing where directed at a level not exc. 1.5m above the starting point complete all as specified and directed. |
| 191 | M&L for cutting existing road/hard standing not exc 45x45 cm-in wide & depth getting out excavated material for laying GI pipe, returning filling & well ramming earth soil with use of watering an including removal of surplus soil, finish top surface using 100mm thick PCC 1:3:6 type C1 using stone aggregate as in road repair flooring surface complete all as directed by Engr-in-Charge.. |
| 192 | M & L for sand cushioning by spreading in trenches crushed sand by gently by punning down manually as in cable protection all as specified and as directed by Engineer -in-charge.Note : Thickness of sand cushioning after punning down will be measured. |
| 193 | M&L for bricks sub-class 'B' laid in trenches in flat style (width portion in horizontal shape) for cable protection complete all as specified and directed. |
| 194 | M&L for Pure sine wave inverter having capacity 10 KVA, 120V to support 10 battries of 100 AH each, including LCD display for which shows real time performance statistics User settable charging current between (8A-21A) for optimized performance, Eco and UPS mode available, Alarms on short circuit, overload, Over temperature and low battery Battery Supported - Flat, Tubular, lithium-ion and SMF along with 10 nos of lithium-ion batteries each of capacity 100 AH, 12/12.8V having five year warranty including connecting cable, inverter and battery protection enclouser with setup complete as per specification and directed by EIC. Technical spcification of inverter:- Pure sine wave tecnology ensure grid like power, smooth power backup, maximum load 8000 W. safely runs essential appliances during power cut, protecting sensetive device with advance LCD display for real time performance monitoring and Eco and UPS modes to choose between longer backup or better performance. An adjusable output voltage range of 200-240V. Warranty-36 months, Technical spcification of battery:- 12/12.8V 100 Ah lithium ion battery compact and efficient type with LFP technology, fast charging, light weight and universal inverter compatibility. warrenty:-60 months Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 29, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Oct 09, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 6 days
Oct 09, 2026
18:00 IST
Corrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 6 daysOct 09, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender