Tender For Addition/Alteration To Bldg No. P-92 At Medical Board Section At Chaf Banglaore
Tender Value
Ref. Documents
Estimated cost
Bid Submission
07 Oct 2026
11 days left
EMD
9852
Bank guarantee accepted
Document Fee
300
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bengaluru Urban → Karnataka
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Addition/Alteration To Bldg No. P-92 At Medical Board Section At Chaf Banglaore
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed by Engr-in-charge. |
| 2 | Demolition of cement concrete (unreinforced) in ground floors and pavings not exc 15cm thickness (below or above ground level) complete all as specified and as directed by Engr-in-charge. |
| 3 | Demolition of brickwork or stone/ boulder masanory, laid dry below or above ground level and removing material from site complete all as specified and as directed by Engr-in-charge. |
| 4 | Material and labour for 100mm thick cement concrete type D2, 1:4:8 (Using 40mm graded stone aggregate) in sub base of flooring or pavings etc., complete all as specified and as directed by Engr-in-charge. |
| 5 | Material and labour for 25mm thick plain cement concrete 1:2:4 type B-0 (Using 12.5mm graded stone aggregate) complete all as specified and as directed by Engr-in-charge. |
| 6 | Material and labour for plain cement concrete 1:4:8 type D-2 (Using 40mm graded stone aggregate) as in foundation complete all as specified and as directed by Engr-in-charge. |
| 7 | Material and labour for precast cement concrete block masonry with solid blocks type C1, 1:3:6 (Using 20mm graded stone aggregate) exc 10 cm in width and setting in cement mortar 1:6 complete all as specified and as directed by Engr-in-charge. |
| 8 | Material and labour for coloured non skid ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tile exc 0.06 sqm but not exc 0.11 sqm, in floors etc., set and jointed in neat cement slurry over and including 15mm thick screed bed of cement mortar 1:6 and pointed with white or coloured cement to match complete all as specified and as directed by Engr-in-charge. |
| 9 | Material and labour for glazed ceramic coloured tiles in vertical surfaces 450x300x7mm/ 600x300x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match, including 10mm thick rendering/ backing coat in CM 1:4 complete all as specified and as directed by Engr-in-charge. |
| 10 | Material and labour for granite slab work 18 to 20mm thick in floors steps, cooking platforms and like in cement mortar 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with granite shade over and including screed bed 15mm thick in CM 1:6 including dismantling complete all as specified and as directed by Engr-in-charge. |
| 11 | Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and as directed by Engr-in-charge. |
| 12 | Material and labour for coloured designed chequered cement concrete tiles of a size 300x300x25mm thick with white cement and pigment in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match and including 15mm thick screed bed of cement mortar 1:6 complete all as specified and as directed by Engr-in-charge. |
| 13 | Taking down cement plaster on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc., complete all as specified and as directed by Engr-in-charge. |
| 14 | Material and labour for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 and finished even and smooth without using extra cement complete all as specified and as directed by Engr-in-charge. |
| 15 | Material and labour for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 and finished even and smooth without using extra cement including mixing of water proofing compound wherever required complete all as specified and as directed by Engr-in-charge.Note: WPC shall be measured and paid separately. |
| 16 | Supply only liquid water proofing compound complete all as specified and as directed by Engr-in-charge. |
| 17 | Material and labour for rendering 10mm thick in CM 1:3 in ceiling on concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed by Engr-in-charge. |
| 18 | Material and labour for preparation of newly plastered surfaces of walls and applying through mechnical means two coats of oil bound distember (white or tined) over a coat of approved primer to obtain uniform surfaces including making good the surface complete all as specified and as directed by Engr-in-charge. |
| 19 | Material and labour for preparation of newly plastered surfaces of walls and applying through mechnical means two coat of exterior emulsion paint over one coat of primer complete all as specified and as directed by Engr-in-charge. |
| 20 | Material and labour for preparing of new plastered ceiling surfaces and applying three coats of white wash complete all as specified and as directed by Engr-in-charge. |
| 21 | Material and labour for framed work such as grills, gratings, etc., with ends of bars shouldered and/ or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed by Engr-in-charge. |
| 22 | Material and labour for preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and as directed by Engr-in-charge. |
| 23 | Taking down of chowkats or frames not exc 1.5 sqm each with shutters (without taking off shutters from the frames) and set aside or removing from site complete all as specified and as directed by Engr-in-charge. |
| 24 | Providing and fixing powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc., Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws complete all as specified and as directed by Engr-in-charge. |
| 25 | Providing and fixing powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows and ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing/paneling, C.P. brass/ stainless steel screws complete all as specified and as directed by Engr-in-charge. |
| 26 | Supply and fix for 5.50mm thick sheet glass ordinary quality and glazing with EPDM rubber/ neoprene gasket etc., exc 0.50 sqm in each panes complete all as specified and as directed by Engr-in-charge. |
| 27 | Supply and fix for veneered decorative plywood, grade I (with BWR resin) decorative veneers on both faces complete all as specified and as directed by Engr-in-charge. |
| 28 | Supply and fix for stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed by Engr-in-charge. |
| 29 | Supply and fix for solid PVC door frame of size 50x47mm made out of 5mm plain colour PVC sheet reinforced with M.S. square tube, suppling and fixing in opening complete all as specified and as directed by Engr-in-charge. |
| 30 | Supply and fix for factory made solid PVC moulded door shutter, with particle board core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick moulded prelam PVC sheet on the front face and 2mm plain colour PVC sheet on back face, supplying and fixing in frame at site complete all as specified and as directed by Engr-in-charge. |
| 31 | Supply and fix for 100mm mild steel butt hinges, medium weight, cold rolled complete all as specified and as directed by Engr-in-charge. |
| 32 | Supply and fix for 100mm long extruded brass handles, fabricated type polished complete all as specified and as directed by Engr-in-charge. |
| 33 | Supply and fix for 150mm aluminium anodised barrel tower bolts of stove enameled black, with bright bolt and fixed complete all as specified and as directed by Engr-in-charge. |
| 34 | Supply and fix for toilet paper holder of vitreous china fixed to walls with chromium plated (CP) brass screws complete all as specified and as directed by Engr-in-charge. |
| 35 | Supply and fix for sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and as directed by Engr-in-charge. |
| 36 | Supply and fix for soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and as directed by Engr-in-charge. |
| 37 | Supply and fix for rotational moulded polyethylene water storage tanks of white colour triple layered (ISO certified) (cylindrical vertical with closed top) hoisted and fixed in position of capacity 500 litres, including 20mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe complete all as specified and as directed by Engr-in-charge. |
| 38 | Supply and fix for gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed 20mm bore complete all as specified and as directed by Engr-in-charge. |
| 39 | Taking up or down 15mm dia steel tubing connections, including cleaning for re-fixing or removal to store complete all as specified and as directed by Engr-in-charge. |
| 40 | Taking up or down 20mm dia steel tubing connections, including cleaning for re-fixing or removal to store complete all as specified and as directed by Engr-in-charge. |
| 41 | Supply and fix for tubes, ‘medium grade’ galvanised, with all fittings and fixed complete to walls and ceilings or laid in floors of 20mm bore pipe line, including cutting holes or grooves in brick wall/ RCC and making good with cement mortar 1:3 complete all as specified and as directed by Engr-in-charge. |
| 42 | Supply and fix for tubes, ‘medium grade’ galvanised, with all fittings and fixed complete to walls and ceilings or laid in floors of 15mm bore concealed pipe line, including cutting holes or grooves in brick wall/ RCC and making good with cement mortar 1:3 complete all as specified and as directed by Engr-in-charge. |
| 43 | Supply and fix in repairs stop valve /angle cock 15mm bore fancy type chromium plated screwed down high pressure, screwed both ends for iron pipe or for unions complete all as specified and as directed by Engr-in-charge. |
| 44 | Supply and fix in repairs fancy type CP-2 way angle cock with wall flanges complete all as specified and as directed by Engr-in-charge. |
| 45 | Supply and fix for 15mm long body bib taps long shank cast copper alloy with crutch or butterfly hadle secrwed for iron piper or for brass ferrule fixed in repairs complete all as specified and as directed by Engr-in-charge. |
| 46 | Supply and fix for single lever wash basin mixer fancy type with capsten head chromium plated screwed down high pressure with without lettered 'Hot' or Cold with long screwed shanks and fly nuts screwed for iron pipe and fixed in repairs complete all as specified and as directed by Engr-in-charge. |
| 47 | Supply and fix in repairs fancy type 15mm dia pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed by Engr-in-charge. |
| 48 | Supply and fix in repairs 15mm bore PVC connection pipe 400mm long with PTMT nuts at both ends complete all as specified and as directed by Engr-in-charge. |
| 49 | Supply and fix in repair towel rail 20mm dia chromium plated including 600mm long including brackets, screws and wooden /plastic cleats complete all as specified and as directed by Engr-in-charge. |
| 50 | Supply and fix for as in repairs health faucet (ABS body) mild steel chromium plated suitable for 15mm dia pipe with 1.25m long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and as directed by Engr-in-charge. |
| 51 | Suppy and fix for 5mm thick frameless bevelled edge full length rectangular decorative wall dressing mirror of selected quality, mounted on walls fixed to plugs with chromium plated brass screws and cup washers fixed in repairs complete all as specified and as directed by Engr-in-charge. |
| 52 | Supply and fix in repairs PVC flushing cistern 10 ltrs capacity valveless syphonic action type low level, white, with inlet, ball valve float and handle including brackets and flush pipe complete all as specified and as directed by Engr-in-charge. |
| 53 | Supply and fix in repairs vitreous china premium quality/ 1st quality wash down water closet pan (pedestal pattern), white (excluding flushing cistern and flush pipe) and including 01 No ‘P’ or ‘S’ trap of dia 100mm including lime concrete bedding complete all as specified and as directed by Engr-in-charge. |
| 54 | Supply and fix in repairs rimless single piece-WC with UF slim seat cover, hinges, fixing accessories and accessories set, cistern fittings, Size: 380x670x765mm, S Trap - 300mm complete all as specified and as directed by Engr-in-charge. |
| 55 | Supply and fix in repairs table top wash hand basin vitreous china, light colour /white of size 565x420x140mm including brass chromium plated waste coupling, chain, plug, porcelain rubber stopper, brackets, 32mm bore PVC waste pipe of appropriate length ilcluding making necessary connections complete all as specified and as directed by Engr-in-charge. |
| 56 | Supply and fix in repairs vitreous china urinals, half stall type white (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe (exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and as directed by Engr-in-charge. |
| 57 | Supply and fix in repairs urinal spreader of PTMT any colour for fixing with 15mm dia pipe. (Minimum weight 60gms) complete all as specified and as directed by Engr-in-charge. |
| 58 | Taking down rain water pipes including all fittings any size and pattern with fittings complete all as specified and as directed by Engr-in-charge. |
| 59 | Supply and fix for PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls 110mm bore complete all as specified and as directed by Engr-in-charge. |
| 60 | Supply and fix for PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors 110mm bore complete all as specified and as directed by Engr-in-charge. |
| 61 | Supply and fix for PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls 75mm bore complete all as specified and as directed by Engr-in-charge. |
| 62 | Supply and fix for PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors 75mm bore complete all as specified and as directed by Engr-in-charge. |
| 63 | Supply and fix for PVC (SWR) floor trap 75mm dia outlet, plain/ hole with grating including jointing with solvent cement complete all as specified and as directed by Engr-in-charge. |
| 64 | Supply and fix for PVC (SWR) bends any radius 110mm bore complete all as specified and as directed by Engr-in-charge. |
| 65 | Supply and fix for PVC (SWR) bends any radius with access doors 110mm bore complete all as specified and as directed by Engr-in-charge. |
| 66 | Supply and fix for PVC (SWR) bends any radius 75mm bore complete all as specified and as directed by Engr-in-charge. |
| 67 | Supply and fix for PVC (SWR) bends any radius with access door 75mm bore complete all as specified and as directed by Engr-in-charge. |
| 68 | Supply and fix for PVC (SWR) junction single, (single T) equal or unequal with access door 110mm bore complete all as specified and as directed by Engr-in-charge. |
| 69 | Supply and fix for PVC (SWR) vent cowl 110mm bore complete all as specified and as directed by Engr-in-charge. |
| 70 | Material and labour for PVC (SWR) gully trap 125/ 110mm, setting and jointing with solvent complete all as specified and as directed by Engr-in-charge. |
| 71 | Material and labour for point wiring concealed type with 1.5 sqmm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed FRLSH copper conductor cable including continuous earth wire of size 1.5 sqmm nominal cross sectional area, single core, 1100 Volts grade, multistranded, PVC insulated, unsheathed, FRLSH copper conductor cable connected to common earth and earth dolly with suitable copper lugs drawing into and including rigid non-metallic PVC concealed conduit of 20mm dia or higher, medium grade complete with all PVC conduit accessories, including metal flush box of 1.60mm thick suitable for modular switches/ sockets/fan regulators including modular white cover plate and modular metal flush box with frame of required modules at site, blanking plates, brass screws, cup washers etc., including all cutting /chases etc., in stone/ brick masonary/ walls, pinning in stone walls / brick walls and pointing in cement mortar 1:3 to ends or edges of landing etc., for concealed conduit wiring using heavy duty stone drilling/ cutter machine and making good to the disturbed surfaces to match the existing complete all as specified and directed by Engr-in-charge for the followings:- |
| 72 | One light point controlled by one, one way switch 06 Amps. |
| 73 | One ceiling fan point controlled by one, one way switch 06 Amps. |
| 74 | One exhaust fan point controlled by one, one way switch 06 Amps. |
| 75 | One 3 /5 pin, 06 Amps socket outlet point on independent board controlled by one, one way 06 Amps switch. |
| 76 | One 3/ 5 pin, 06 Amps socket outlet point on same board controlled by one, one way 06 Amps switch. |
| 77 | All as per item No.71 here-in-before but point wiring with 2.5 sqmm single core FRLSH cables and earth continuity wire of 2.5 sqmm single core FRLSH cable for one 3 /6 pin 16 Amps socket out let point controlled by one, one way switch on independent board complete all as specified and directed by Engr-in-charge. |
| 78 | Supply and fix for modular switch, 10 Amps, single pole, one way, 230 volts, one module complete all as specified and directed by Engr-in-charge. |
| 79 | Supply and fix for modular switch, 16 Amps, single pole, one way, 230 volts complete all as specified and directed by Engr-in-charge. |
| 80 | Supply and fix for modular socket outlet 05 pin, 06 Amps, 02 module with shutter complete all as specified and directed by Engr-in-charge. |
| 81 | Supply and fix for modular socket outlet 02 in 01, 3/6 pin, 16 Amps, 02 module with shutter complete all as specified and directed by Engr-in-charge. |
| 82 | Supply and fix for ceiling rose, 65x50mm surface type with 3 terminals incl connection complete all as specified and directed by Engr-in-charge. |
| 83 | Supply and fix for electronic ceiling fan regulator, stepped type of 0 to 04 rotary steps, electronic, 02 module, humfree, AC, 230 volts, 100 watts complete all as specified and directed by Engr-in-charge. |
| 84 | Supply and fix for ceiling fan complete with three blades, down rod, accessories 230 V, 1200mm sweep, min air delivery 210 CFM, BEE 5 star rated with brushless direct current motor incl connection complete all as specified and directed by Engr-in-charge. |
| 85 | Supply and fix for exhaust fan, 300mm sweep, steel body, AC single phase, 230V of with blades, frame, shutters and louvers with all electrical wire connection and making necessary hole arrangement in wall of any type of required size for fixing of exhaust fan incl necessary plastering and civil work as required for proper fixing of exhaust fan and matching of surface with existing surface complete all as specified and directed by Engr-in-charge. |
| 86 | Supply and fix for fresh air ventilating fan 230/ 250mm sweep, 230V, AC, sturdy engineering plastic body with louver shutter etc., and making necessary hole arrangement in wall of any type of required size for fixing of exhaust fan incl necessary plastering and civil work as required for proper fixing of exhaust fan and matching of surface with existing surface and connection complete all as specified and directed by Engr-in-charge. |
| 87 | Supply and fix for ceiling recessed mounted LED panel type of size 2 ft x 2 ft, 36W, 230 V, white /warm white type complete with driver full window glarefree opal diffuser LED panel with CRCA powder coated white housing complete with all accessories required for connection and making good the disturbed ceiling complete all as specified and directed by Engr-in-charge. |
| 88 | Supply and fix for on surface /wall mounted LED batten, warm white, robust extruded and initigrated electronic drive 20 watt, 4 feet with accessories and connection complete all as specified and directed by Engr-in-charge. |
| 89 | Supply, installation, testing and commissioning of hi wall mounting air cooled inverter split type air conditioner indoor and outdoor units of 1.5 TR capacity, 5 star energy rating complete with cordless LCD remote control unit and with turbo cool, stabilizer free operation, energy saver, anti corrosive blue fins for protection in built air ioniser and plasma filter for better indoor air quality and the out door unit will be fixed in open space with proper foundation or on wall with proper fixing /supporting stand arrangements including 3m suction and discharge refrigerant copper pipe line with high EER complete all as specified and directed by Engr-in-charge. |
| 90 | Material and labour for cutting of existing stone masonry wall for crossing the suction, discharge pipe line and electric line connection of split type air conditioner and after the connection necessary cement work will be provided for making the surface as good complete all as specified and directed by Engr-in-charge. |
| 91 | Supply and fix for copper tubing for refrigerant suction line of split AC of size 12.7mm drawn through pipes/ fixed to walls/ laid on floor or roof in all respects complete all as specified and directed by Engr-in-charge. |
| 92 | Supply and fix for copper tubing for refrigerant liquid line of split AC of size 6.35mm drawn through pipes/ fixed to walls/ laid on floor or roof in all respects complete all as specified and directed by Engr-in-charge. |
| 93 | Supply and fix for heat insulation superior quality nitrile rubber of 9mm thickness, ISI marked for copper tubing of any size of refrigerant line including necessary clamps, PVC tape knots etc., complete all as specified and directed by Engr-in-charge. |
| 94 | Supply and fix for AC drain hose outlet PVC pipe of standard size 20mm complete all as specified and directed by Engr-in-charge. |
| 95 | Supply and fix for PVC insulated FRLSH copper conductor control cables of size 2.5 sqmm 5 core for outdoor to indoor unit connection for split AC complete all as specified and directed by Engr-in-charge. |
| 96 | Supply and fix for bracket of suitable size for outdoor unit of air conditioning complete all as specified and directed by Engr-in-charge. |
| 97 | Supply and fix for sheet metal enclosure with socket plug top and neutral enclosure with a two pin and earh plug and socket complete with one SPN MCB 20 Amps 'C' curve type complete all as specified and directed by Engr-in-charge. |
| 98 | Material and labour for sub main wiring with 4.0 sqmm nominal cross sectional area, two single core, 1100 volts grade, multi-stranded, PVC insulated, unsheathed, FRLSH copper conductor cable with and including continuous earth wire of size 4.0 sqmm nominal cross sectional area, single core, 1100 volts grade, multi-stranded, PVC insulated, unsheathed, FRLSH copper conductor cable drawing into and including rigid non-metallic PVC concealed conduit not less than of 20mm dia, medium grade with all conduit accessories and connected to common earth dolly with suitable copper lugs including all cutting /chases, pinning etc., in stone/ brick masonary/ walls and making good to the disturbed surfaces to match the existing complete all as specified and directed by Engr-in-charge.Note: One run of earth continuity conductor, one run of PVC conduit concealed in wall and two run of copper conductor together taken as one length for measuring unit length. |
| 99 | Material and labour for sub main wiring with 6.0 sqmm nominal cross sectional area, two single core, 1100 volts grade, multi-stranded, PVC insulated, unsheathed, FRLSH copper conductor cable with and including continuous earth wire of size 6.0 sqmm nominal cross sectional area, single core, 1100 volts grade, multi-stranded, PVC insulated, unsheathed, FRLSH copper conductor cable drawing into and including rigid non-metallic PVC concealed conduit not less than of 20mm dia, medium grade with all conduit accessories and connected to common earth dolly with suitable copper lugs including all cutting /chases, pinning etc., in stone/ brick masonary/ walls and making good to the disturbed surfaces to match the existing complete all as specified and directed by Engr-in-charge.Note: One run of earth continuity conductor, one run of PVC conduit concealed in wall and two run of copper conductor together taken as one length for measuring unit length. |
| 100 | Supply and fix for sheet metal enclosure DB, single pole and neutral with 200 Amps rated bus bar, 8 way, 230 volts, glazed, double door type, IP-43, including connecting all connections of wire to MCBs with proper lugs incl chases wall for fixing DB and making good to the disturbed surface complete all as specified and directed by Engr-in-charge. |
| 101 | Supply and fix for MCB SPN, 63 Amps, 240 Volts, AC of breaking capacity 10 KA, 'C' curve and connections by using suitable copper lugs complete all as specified and directed by Engr-in-charge. |
| 102 | Supply and fix for MCB SP, 10 to 32 Amps, 240 Volts, AC of breaking capacity 10 KA, 'C' curve and connections by using suitable copper lugs complete all as specified and directed by Engr-in-charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 16, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 07, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 11 daysOct 09, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 13 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender